Windows 7 64 bit laptop on wireless network can not find .inf wired for Canon Pixma iP4000 printer driver for windows 7 32 bit PC
First of all, I read the thread on the laptop win 7 and win XP PC with attached IP4000. I have just isn't helping me with that. I am computer literate network, but I have to be dumbing down, so be specific in a response, you can give it. Please, do not assume I know something just because it can be public knowledge. Thank you for understanding my situation!
New Win 7 64 bit laptop connected wireless to a network home through a Netgear WNDR3700 router. Wired to the router, it is a PC with a USB attached printer Canon IP4000. This printer has worked without problem with this PC for years. Add the laptop. Try to access the printer on the network (it is set to be shared on the PC) translates into an inability to find the driver for the printer. On the Canon download site, I downloaded and installed on both machines the driver add-on 'aomwin110ea23us.exe '. This does nothing to solve the problem. Then, follow the suggestions in the thread referenced above, I downloaded installed 7 - zip and unzipped the file add-on from Canon. Guess what? -There is no, zero, nada, stupid ".inf" file in there! I understand that I need share on the PC to both x 32 and x 64, but without a valid .inf file to point to, I'm sunk. And the same is true when you try to add the printer to the laptop - not to point to .inf file. Is the only thing that I have not tried to install the printer directly to the laptop via the USB port, and it's because this is not a configuration that is usable for me. The printer must be attached to the PC. Is there anyone out there who can help me solve this dilemma? Please do not give me an answer telling me to download the driver - usually you tell me precisely what driver and then guide me through the process. Rest assured that I appreciate sincerely any help you can give me. Thanks in advance!
Most likely the name of the driver you are using on XP to share the printer a is not not the name of the 64-bit driver. The pilots names must match in order to add the printer as a connection to the 64-bit computer using the normal RPC protocol. You can configure the printer on 64-bit Windows 7 as a local printer that will basically copy the data from the printer to the format to share on the XP machine using SMB protocols.
This is a Ko for incompatible drivers when connecting XP to NT4. Replace your server / client configuration, but it's the same process. Make sure that you are connected to the internet and select the Canon 64 bit driver available on Windows Update (use the Windows Update button in add printer) http://support.microsoft.com/kb/282842
Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
Tags: Windows
Similar Questions
-
I have a laptop running Windows 7 (64-bit machine) I want to print from. The laptop is on a home network wireless. The office is wireless as well and is running Windows XP. The Office has a Canon Pixma iP4000 printer connected with a parallel cable. I installed the latest XP drivers for the printer on the desktop. The laptop can connect directly to the printer with a USB cable and drivers will download automatically and it will print correctly. However, I can't connect the printer using the wireless system. I can go on the laptop to the home network and navigate to the printer and try to install. It makes an automatic search and says that it cannot find the correct drivers. I can browse to the file to install on my desktop, but it of an .exe file and not. INF. I run the .exe file and it installs too, but Setup of printer on the laptop won't let me not by the .inf screen add to complete the installation of a wireless printer.
Any suggestions?
Very probably the XP driver name is different from the name of 64-bit driver. Create a Local Port which copies the data to the print size in Windows 7.
Here is an article knowledge base how to the names of the incompatible drivers. Replace the Windows 7 machine for NT4 machine referenced in the article.
http://support.Microsoft.com/kb/282842
If you load the printer driver 32-bit on your 64-bit computer, you need the 32-bit driver for Windows 7. You can do if you have a 32-bit computer of Windows 7 on the network to push pilots up to the machine that is sharing the printer. None are flat files on the Windows 7 DVD, you need to install the OS or mount the ISO.
The key to successful sharing between computers that run different printing architecture processors is pilot name. PCL6 equal NOT PCL 6.
Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1
-
Canon pixma ip4000 printer works only with Windows 8.1
Separated from this thread.
Hai, I have a Canon pixma ip4000 printer, it works fine with my desktop running windows 7, but it didn't with my laptop running windows 8.1
I can't find any driver support to the Canon Web site.
Is there any solution for this?
Looking forward to hearing from you soon.
Thank you
Hello Chit,
Thanks for posting your query on the Microsoft Community.
I suggest trying to download the latest Windows 7 drivers from Canon Web site and then try to install in compatibility mode.
Step 1: Download the drivers from the Canon Web site.
Step 2: Installing the driver in compatibility mode.
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
You can also provide the following link to check the compatibility of the printer.
http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home
Follow the Microsoft articles as reference and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer
h ttp://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.
It will be useful.
-
I just bought Adobe Elements14 photoshop & Adobe first Elements14 I have an iMac and can not find the download for my platform. There only Windows. What should I do to get a Mac download?
Mariene salvation,
Please find the links below to download:
Photoshop:Download Photoshop Elements free trial | Adobe Photoshop Elements
Creation:download first Elements | 14, 13, 12, 11, 10
Hope this helps!
-
HP laptop, 2000 - 369WM: can not find the drivers for PCI devices or network controller
I don't have a Notebook HP 2000-369WM. Just wiped the dive hard and installed Windows 7 64 bit and I can't find 2 drivers that I need. Controller and PCI network device any help would be great.
Hello
Please try:
1 PCI: Card reader
http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52186.exe
2. Wifi: Ralink 802.11 b/g/n WiFi Adapter
http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56942.exe
More drivers:
http://support.HP.com/us-en/drivers/selfservice/HP-2000-notebook-PC-series/5145724/model/5171088
Cordially.
-
Original title: what to do now?
Hello! I'm trying to get my work wireless for vista, but it won't happen it tells me it cannot find the drivers for the control of the hierarchical network... what to do?
Hello
· It worked before?
Step 1: Try the procedure described in the following article:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Step 2: See also the article below:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
-
HP Photosmart C309a - but wireless network can not connect
I have a new printer C309a, but it does not connect to my wireless network. I have read all the posts and tried everything I can think of (I'm not expert network but reasonably competent), but nothing helped.
I use a router NetGear DG834N which works very well provide a wireless network for an iMac, 2 iPhone and an iPad. There is also a PC running that Vista wired to the router.
When I try to connect the printer to the wireless network, it finds the network OK but when I put the password it fails to connect. Test report says wireless MAC address filtering can be enabled. But... MAC filtering is disabled on the router. Wireless isolation is disabled on the router.
Tried to get this happening for a few weeks now. I want to emphasize that I managed to print a test page the first time it has been installed (so there was a wireless connection then). And I got a wireless connection briefly a few days.
Quite perplexed and not a little frustrated. Can anyone help please?
I think it's a question of wireless mode. Try the other settings from the drop-down menu where it says 270 Mbit/s.
-
Can not find the drivers for laptop
Hello! So I reinstalled windows 7 on my laptop, serial number 584037-001.
Now I can't find a single driver for it online, except for a site that sells recovery .img files for like $10 a piece.
Concidering that the laptop is like 2-3 years I have no interest what so ever to put more money on it. And the only driver I need (assumption) unit ths network control.PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00
PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C
PCI\VEN_1814 & DEV_5390 & CC_028000
PCI\VEN_1814 & DEV_5390 & CC_0280This is the ID of the control unit. I frantically searched on this site and many others without a bit of luck.
I love you, if you find drivers for me!Hello
The driver for the hardware in your first post id is on the following link.
All the other drivers you need can be found o Page of the HP product below.
Kind regards
DP - K
-
HP 15-f009ca: can not find the drivers for my PC after downgrading to Windows 7
Hello world!
A few weeks ago, I bought a Hp laptop of type 15-f009ca. Because I didn't like windows 8, I downgraded to Windows 7. The installation was successful, but I could not find the driver for my PC wireless LAN.
Anyone know where I can download it?
Or is it still possible to find the driver windows 7 for this guy?Hello:
You should be able to use most of the W7 x 64 drivers and software from the HP 255 G2 on your model except the BIOS and firmware files.
http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6431940&swLangOid=8&swEnvOid=4063
Your laptop is the Realtek RTL8188EE 802.11bg / n 1 x 1 WiFi adapter, this is how the wireless driver you need.
In addition, you need these drivers usb3. Install both and restart.
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125616_1
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_123787_1
-
SanDisk USB Flash Drive & Logitech Wireless Mouse can not find the driver
I am running Windows XP on a Dell XPS laptop. When I joined the SanDisk Cruzer Flash Drive or a mouse with Logitech M215 wireless computer detects it and tries to load a driver but just by saying no driver found. I use other mice wireless and other readers flash without any problems. I went on the Web from Logitech website and SanDisk and they both say no driver required. I contacted Logitech and they said it's a matter of Microsoft's operating system. Where can I get a driver to run both devices. Also when I go to the hardware profile the other device has a yellow box? next to him. I try to uninstall the driver and updated it but without success. Still looking for a driver. Where can I find the driver. Help.
Hello
1. have you tried plugging it into different USB ports and check?
2. did you try to use the same flash player and mouse on another computer and check if it works there?
3. how exactly did you uninstall the driver and reinstall it?
Connect the hardware (mouse and flash drive) and run the fixit tool in the following article.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
See also:
Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
http://support.Microsoft.com/kb/314634A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
http://support.Microsoft.com/kb/925196 -
Interruption of the internet connection. Says "network can not find proxy address.
0I am connected directly to internet DSL. Did a system restore and lost my internet. When I got to the computer it connected to the internet without problem. Now nothing I try works. I'm so frustrated... any ideas? It finds no network and won't let me set up a broadband access.
Help! I tried to undo the restoration and, of course, windows cannot do due to a missing fileHi TopHatter,
· You try to connect to a Wired or wireless network?
· Recent changes to the computer before the show took place?First of all, make sure that explore the Internet proxy settings are not enabled. Follow the steps for this control.
1. launch Internet Explorer.
2. click on Tools , then click Internet Options.
3. click on connections tab and click LAN settings.
4. make sure that under Proxy Server , none of these options are checked. If something is activated, please the box.I suggest you to see if you are able to connect to internet wired to the router.
If your computer has problems to connect to the Internet or to other computers on a network, try to use one of the network troubleshooting utilities to solve the problem.
Open the convenience store network by double-clicking the network icon in the tray and then clicking on solving of problems
Open the Internet connections convenience store by clicking on the Start, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under network and Internet, click connect to the Internet.
Follow the steps from the link below that may help you solve the problem: Open convenience stores of networking: http://windows.microsoft.com/en-US/windows7/Open-networking-troubleshooters
using the utility in Windows 7 Network Troubleshooter: http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
If you are unable to connect to your wireless network, and then follow the steps from the link below:
How can I solve the problems of network card?: http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
Thank you, and in what concerns:
Swathi B - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
M30X-124: can not find the drivers for linux and windows 2000
I want to know how I can linux Redhat 9.0 on my computer. Wenn, do check the hardware, the screen goes black.
And I want to install windows 2000, windows 2003 or later. But the important point is that I can´t find all the drivers on the site.
Thank you[Edited by: admin 7 May 05 08:36]
Hello
Sorry, Toshiba provides only the drivers and tools for the OS liveries (M30X: WinXP). But you can search with google for drivers of W2k adapted. I think you will find them!
Win2003 drivers can be a problem because it is a server operating system and there is not so much drivers for laptop available!
For Linux, I found 3 interesting sites for you!
http://newsletter.toshiba-tro.de/main/index.html
http://Linux.Toshiba-DME.co.jp/Linux/index.htm
and
http://www.Linux-on-laptops.com/Tanya Bye
-
can not find the drivers for my touchpad on laptop
I z570 lenovo, for some reason, the function of the key - stop working and I can't scroll more ', I tried to search for drivers, but can't find it please help...
Hello
Here you will find all Z570 drivers for Windows 8:http://support.Lenovo.com/en_AE/research/hints-or-tips/detail.page?&docid=HT072735«"Those of your touchpad is labeled Synaptics TouchPad Driver for Microsoft Windows 8 (32-bit, 64-bit) - IdeaPad Z570»»Kind regardsCarlos -
HP laptop - 15-ay007tx: can not find the drivers for my HP laptop laptop-15-ay007tx
I can't find drivers for my laptop. Can someone please help me by providing the links for all the compatible drivers for the HP model for laptop - 15-ay007tx.
Full profile here: http://support.hp.com/us-en/document/c05138543#AbT1 -
Help! Problems can not find the drivers for my laptop for windows XP SP3 details inside
Type of laptop: HP G60T 200
http://h10025.www1.HP.com/ewfrf/wc/product?product=3837660&LC=en&cc=us&DLC=en&lang=en&cc=us
The processor is Intel (r) Core (TM) 2 Duo CPU T6500 2.10 GHZ
I have a problem, identify the following drivers:
Audio player
Car graphics
Wireless drive
Ethernet disk
Audio player
HP Integrated Module
SM Bus controller
Modem on Bus High Definition Audio device
Signal Acquisition data processing controller and PCI
I searched other topics but apparently I failed to get the drivers and when I download the driver it's a bad driver or what facility there without having to install.
Help, please
Kind regards.
Intel 4/5 Series Express graphics card , here
Maybe you are looking for
-
I use Windows 7 and firefox browser. I was invited to update flash player to the new verion 17. (blah blah). 169. I downloaded the update. installed without a problem but come to find out now, everytime I try to go youtube my videos play but they are
-
Display in FF8.0 problems
Since the update to FF8, I had a number of questions -Menus and menus drop down appear transparent when you hover over them. This includes the address bar, form fields, right-click menu, main menu of the firefox button. This problem is corrected is r
-
Photosmart HP 5520. Can not scan to my computer
Photosmart HP 5520. I can print from my computer very well, but cannot scan from the printer TO my computer. Message is "connection error". This happens sometimes, but usually I can fix in any turn off, unplug and start again. Today, nothing works. T
-
Hello I'm developing a remote monitoring application using a cRIO-9012 and various modules of e/s. I wanted to use the web services on the cRIO feature but I'm having a hard time in some areas. The first is how to get the web service running on the c
-
publication order, config to access local server remote-web
Al hilo mi otro post http://forums.ni.com/t5/LabVIEW/sin-acceso-a-control-remoto-web-publishing/m-p/1497856/highlight/tru... are solved, tengo otro problemilla: I have a server local integrated con varios hence donde to banish una scada application r