priority for the program continues to change running

Similar Questions

• A software says I need 4 MB of VM set aside for the program to run.

  Original title: virtual memory.

  How to set 4 MB of virtual memory in windows xp? A software says I need 4 MB of VM set aside for the program to run.

  Hi KennethBrasel,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description provided, looks that you receive a virtual memory message when installing a program on Windows XP computer.

  By default, the virtual memory paging file that is created during installation is 1.5 times the physical RAM on your computer. Therefore, a computer that has 1 GB of RAM installed will have 1.5 GB of virtual memory.

  You can manually change the size of the swap file to make it larger or smaller. You can also optimize virtual memory use by dividing the space of files between multiple drives and by removing the disks slow or very open space.

  He would be grateful if you can answer this question in order to help you further.

  1. What is the size of your RAM memory?
  2 are. what program you referring?

  I suggest you try the following steps to change the virtual memory:

  a. Click Start, right click my computer and then click Properties.

  b. in the System Properties dialog box, click the Advanced tab.

  (c) in the results pane, click settings.

  d. in the performance Options dialog box, click the Advanced tab.

  e. in the virtual memory section, click on change.

  f. change the initial size value and the value of maximum size to a higher value, click on set and then click OK.

  g. click OK to close the performance Options dialog box and then click OK to close the System Properties dialog box.

  Note: With virtual memory, the computer can use the hard drive as memory (RAM) space. The computer uses virtual memory to increase the ordinary RAM that is installed on the computer. If you reduce the size of the pagefile, some the program may not start correctly or may not start at all. This problem may occur even if the computer has plenty of RAM.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Hi, my trial period exceeded and buy the complete package of the cloud Barnard for one year, while trying to download the programs continued to show me that my period obsolete preuba.

  Hi, my trial period exceeded and buy the complete package of the cloud Barnard for one year, while trying to download the programs continued to show me that my period obsolete preuba.

  If you updated to Creative Cloud 2015 and some or all of your CC applications show 'trial start or buy now' in the desktop app creative cloud, or if you launch any product of CC 2015 and the pop up displays a test message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• Error: Dragon Naturally Speaking seems to work in Compatibility Mode Windows, which can lead to errors. We recommend to disable the compatibility mode for the program natspeak

  Original title: Dragon Naturally Speaking will not charge. He was working. I have time. The only thing different is my 10 3 demo of windows expiredeinstalled

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Dragon Naturally Speaking does not load. He was working. I have time. The only thing different is my demo windows 10 expiredeinstalled 3 programs you have problems with
  • Error messages Dragon Naturally Speaking seems to work in Compatibility Mode Windows, which can lead to errors. We recommend to disable the compatibility mode for the program natspeak
  • Recent changes to your computer
  • What you have already tried to solve the problem I find no windows compatibility mode. I do not know how

  Hi jrskona,

  1. don't you make changes before the show?

  Try the following steps to disable the compatibility mode.
  a. Locate the launch of Dragon NaturallySpeaking file, right-click on it and click Properties.
  b. click on the Compatibility tab.
  c. in compatibility mode, uncheck the box "run this program in compatibility mode for".
  d. click ok to apply the changes.
  e. check if the problem persists.

  If the problem persists, then contact the program vendor support team:see Dragon NaturallySpeaking support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The clock continues to change Windows 7

  I have a HP Pavilion dv7 laptop running Windows 7 Ultimate.  The clock continues to change.  The interesting thing is that only the changes of time, not minutes and seconds.  Any suggestions would be greatly appreciated.

  Open the control panel and you check the settings for "Region and language".

  J W Stuart: http://www.pagestart.com

• Each time you start firefox asked me if want to allow the program to make changes to the computer

  Whenever I start firefox, I wonder if I want to allow the program to make changes to my computer. Do not have this problem until I updated to the new version.

  This has happened

  Each time Firefox opened

  == I've updated to the new version

  Check that you are not Firefox running as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  In the Compatibility tab, make sure that this level of privilege: "Run this program as an administrator" is not selected.

  You should also check the firefox.exe program properties in the Firefox program directory.

• How can I disable "Fingerprint Software" for only for the programs?

  Hello

  somehow, the 'Fingerprint Software' require the user to slide a finger at any time it open programs that require the user to insert "user and password."
  How can I disable it permanently just for the program, not to open a session?

  Thank you.

  Hello

  In the TrueSuite Access Manager, you can configure some settings.
  In the administrator settings, you will find two tabs; General and advanced.
  On the Advanced tab, simply uncheck the option called: change logon Windows fingerprint logon password.

  I think that should do the job.

• my c drive shows low disk space, so I searched for the program that holds more memory on drive c. I got to know that this pagefile.sys has 3 GB in the c drive

  Hi, my c drive shows low disk space, so I searched for the program that holds more memory on the c drive. I came to know that pagefile.sys has 3 GB in the c drive, kindly guide me to move the pagefile.sys to another drive.

  Hi jafrin.michel,

  Thanks for posting in the Microsoft community.

  Before you start the troubleshooting steps, I need the information required.

  What version of the windows operating system do you use?

  Method 1:

  If you are using windows 7, I suggest to perform a disk cleanup and verify.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  If you want to move the pagefile.sys to another drive, follow the steps and check out them.

  Follow these steps to move the pagefile.sys to C: drive on D: drive (if you have the drive D :).

  1, write click on my computer and select Properties.

  2, click on the Advanced tab.

  3, click settings under performance menu.

  4, click on the Advanced tab and click on change.

  5, select letter (C :) and "BOLD" No pagefile then click on Set. )

  6, if you want to configure pagefile.sys in, select drive D: drive letter D: and "BOLD" in the custom size or the size of the system managed , then click on Set. It displays a pop-up message click OK.

  7, again click apply and OK OK.

  8, the system you will be asked to reboot, click on Yes.

  9, after rebooting the system, you can see the pagefile.sys will be moved to D:

• The time on the clock continues to change at the wrong time.

  The time on the clock continues to change at the wrong time.

  First of all, make sure that your clock is set to the correct time zone.

  Right click on the clock.

  Select adjust date and time.

  Then select change time zone.

  If your time zone is correct, you may have a bad CMOS battery but you can get around it by having the system more often with the internet time synchronization.

  1. Go to start
  2. Success and type task entry
  3. Click the arrow on the left next to the Task Scheduler Library
  4. Click the arrow next to Microsoft
  5. Click the arrow next to windows
  6. Click the folder to synchronize the time
  7. At the top right click on Synchronize
  8. Click on properties
  9. Go down and check run with highest privileges
  10. Click the triggers at the top tab
  11. Double-click the trigger that is listed in the box of
  12. On the top of the page task Begin at startup
  13. Uncheck delay task
  14. Check Repeat task (change in 5 minutes)
  15. On the right hand side change indefinitely the duration of
  16. Click OK twice

  Exit Task Scheduler

  Turning the computer off and see if it works

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I hope this helps!

  Nice day.

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Program what ever I try and open the application for the program open with after infection by the virus on Windows Vista

  Original title: day after my laptop was vista2012 virus

  my laptop was vista2012 virus, I managed to get rid of him remove the registry concerned (that I found on a website), since then im even worse problems. program what ever I try and open the request for the program to open with, and even internet Explorer does not work? I tried restoring the system from the back to the top, but they have been erased any help?

  Hi Jarnold55,

  Method 1: Run the fixit available in the article below and then check if it makes a difference

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 2: Run Microsoft Security scanner (MSS) to remove the infection rest of the computer

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

• How can I re - attach the data files for the programs?

  Original title:

  reconnection of the files

  BONE had to be reinstalled.  All data is saved but lost programs.  Programs now reinstalled, but how can I re - attach the data files for the programs?

  Hello

  You copy the data on your computer (Documents, Photos, etc.) and file extensions should be automatically associated with programs they have written in.

  Otherwise:

  "Changing programs by default by using Set Program Access and defaults of the computer"

  http://Windows.Microsoft.com/en-us/Windows/set-program-access-computer-defaults#1TC=Windows-7

  "How to change file Associations in Windows 7 and Windows 8.

  http://www.7tutorials.com/how-associate-file-type-or-protocol-program

  See you soon.

• in my bar there is always some icons for the programs that I removed. How IRB of icons in the system tray?

  in my bar there is always some icons for the programs that I removed. How IRB of icons in the system tray?

  Hi chris malanda

  You can remove the program from the taskbar and check if that helps. To remove a program pinned to the taskbar, open the jump list for the program, and then click remove this program from the taskbar.

  See the help link - below

  http://Windows.Microsoft.com/en-us/Windows7/pin-a-program-to-the-taskbar

  I hope this helps.

• Hi, when I buy an annual service by my credit card, after the first month, for the next can I change the credit card?

  Hi, when I buy an annual service by my credit card, after the first month, for the next can I change the credit card?

  Hello

  You can change the billing information anytime before the next renewal. Please see the link below on how to update the billing information.

  Manage your creative cloud membership

  Hope this will help you.

  Kind regards

  Hervé Khare

• Hello, I just pay for membership on the cloud creative adobe but I see that I have only a trial for the programs download, do I have to buy each program separately?

  Hello, I just pay for membership on the cloud creative adobe but I see that I have only a trial for the programs download, do I have to buy each program separately?

  Hello Maria,.

  As I checked the details of your account with the e-mail given on the forums you bought subscription Creative Cloud STE and if it is to give you the trial please follow the steps listed below:

  Connect and disconnect activate Cloud Creative applications

  It will be useful.

  Concerning

  Bianka Attre