Privacy settings for publish online

Similar Questions

• privacy settings for Lifelog?

  I like to use SWR10 and Lifelog to track my activity, but I want some control over the data collected.

  For example, I like the account not be tracked, but I don't want my GPS position followed in Lifelog. Is there a setting for this?

  Open LifeLog > settings > Logger. Here you can enable or disable the Application of location, activities and change location mode.

• Firefox is acting as it comes to install every morning when I wake up. He loses the privacy settings, home page and shows the start-up firfox and firefox home.

  He also loses the addons, like personas. I tried to reset firefox and deleting the prefs.js. There is none of the other files mentioned in the article on how fix firefox does not save the settings. Every day that it starts with the Welcome to Firefox and Mozilla Firefox Start Page my homepage EVEN instead after I created my homepage and he remembers.

  Once I saved the settings they are stored for the rest of the day, but when I wake up in the next day, POOF!, firefox forget what I did. I remember stuff like my bookmarks, history and tabs pinned, but he doesn't remember my privacy settings for him is not to suggest stuff on the address of my history and bookmarks toolbar.

  As of the time of this message, I did not my settings for troubleshooting information are the status of firefox is in when I open it first from a morning. What the hell is happening?

  What security (firewall, antivirus) software do you have?

  Some security software has virtualization or sandbox features that can cause problems to protect and restore files in the Firefox profile folder.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I can't get on gmail, get the message about privacy settings, what are the correct settings?

  The message said that not allowing don't no cookies may be the problem but I tried on each setting I can think without results. Please tell me the correct privacy settings for gmail.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (MAC)

• problems with iPhone privacy settings

  I have the iPhone 6, iOS 9.2.1.

  Apps that made the request for access to the contacts do not appear in settings > privacy > contacts. I can't change the privacy settings for contacts.

  How to solve a problem?

  Try going to settings for any specific application in question.

• I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!

• my privacy setting is stuck on do not forget history, won't stay on using the custom settings for history, after I've selected and click ok

  When I go to tools, Options, privacy and "Use the custom settings for history" of the value and then click on OK it won't save. It remains on "Remember history", even if she never will save "remember history" as I tested it. It seems if be produced after these recent last Firefox update. Anyone know why I can not choose "Use the custom settings for history", as is the parameter I want to use?

  Why aren't satisfied with the history settings by default that you currently have?

  Any changes (for example, to disable the cookies third party or form not given memory or keep cookies until you close Firefox and make an exception for the cookies you want to keep) that you will cause "use... custom parameters. "to be selected if you really want to see.

• Publish online does not not for video

  Why publish online does not not for video. I use the video in .mp4 format. and still this attention (see below). If I ' not use video "post online can successfully.  Could you help me with this problem. Thank you for Attention

  

  Hi William,.

  Can you please check if you have the latest version of InDesign, if not, please update InDesign and republish your doc again (with video).

  In addition, please can you me the name of the video you are trying to download? Some special characters may cause conflicts during the download.

  If this is not always the case, I ask you to share your video via dropbox to [email protected] further investigation...

  Kind regards

  Monica Singh

• Unregistered privacy settings

  I am running Windows 7, 64-bit and Skype 5.3... and the privacy settings are not saved. I can't save the "allow only people...". "setting.

  WTF is happening... I pay for services of Skype and I am constantly irritated and interrupted by spammers to drone.

  I need to be able to SAVE MY SETTINGS.

  PLEASE CORRECT.

  Before trying to isolate a problem, it is always better that one runs the latest version of Skype. In itself, that can solve the problem.

  A new version has just been published July 28, 2011:

  Please click the 'Get Skype' link at the top of this page and download the normal version of Skype, NOT the beta version to get this new version.

  This new version is 5.5.0.112 to check what version you have, using the Skype client main window, please do:

  Help-> on Skype

  NOTE: If this does not work, please right click on Skype icon located in the system tray, change your ot 'offline' status for 5 seconds and then change your status to "online" and then try to re - define your privacy and then settings by clicking on the Save"" button.

  About me You can also use an IP camera that your camera for Skype videoExample Instructions

• Small box, Adobe Flash Settings for storage space interferes with videos. It won't go away when you click DECLINE. Windows 7

  This little box pop up asking the storage space appears constantly during the videos, and it won't go away when you click DECLINE.  I tried to DENY EVERYTHING in the settings, but then I couldn't videos, even videos that play, but are covered by the small box of Adobe, asking for storage.  I just never will have access to the videos without the interference of Adobe?

  Hello

  The application that you are running in Adobe Flash Player wants to store some information on your computer, but it needs more space than is currently allocated. Player, Flash displays the amount of space that is currently used for storage and pray the required maximum to save the information.

  You can use the Save Local settings panel to let future applications of this Web site to store information on your computer without asking you for permission each time. To display the Local Storage Panel:

  a. right click on the image for application during its execution.

  b. in the context menu, select settings and then click the Local Storage tab.

  You can also use the Flash Player Settings Manager to manage your settings of local storage at the global level and on a site-by-site basis.

  1. what application you run using Adobe Flash Player?

  2. you are trying to play the videos from the computer or online?

  3. what web browser do you use on your computer?

  Follow the steps below:

  Method 1:

  In the Settings of Adobe Flash Playerpop-up message, check the box never ask again, click allow and control.

  For reference:

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/help07.html#117290

  Method 2:

  Uninstall Adobe Flash Player and reinstall the latest version and check.

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install the latest version of Adobe Flash Player from the link below:

  Adobe Flash Player:

  http://get.Adobe.com/flashplayer/

  Method 3:

  If you are facing problems in Internet Explorer, and then follow the steps in the link below.

  The video problems when you use Internet Explorer:

  http://support.Microsoft.com/kb/2532294

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For reference:

  Of local storage pop-up question:

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/help06.html

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• RGB PDF color move when published online

  Hello everyone, this if my first post a question online like this. I would be grateful any advice!

  I created a document in InDesign, which is intended to be uploaded/published for viewing online. A lot of colors and transparency effects applied throughout. I took care to use RGB images and use the Document RGB transparency merger space since the intention for online publication.

  I played with the settings of PDF export over time and get good results with one exception. When the client downloads the final PDF (which correctly sees on the screen)... While it is open in the viewer online, some unwanted color changes are occurring on all pages where a color photo of reform took a transparency (in particular the 'brightness' effect) effect applied to it. Shadows are not a problem... not all the effects seem to provoke the question, but the brightness and I think that multiply and probably a few others along these lines, cause the color change.

  The client has done a workaround to solve the problem by taking the problematic PDF pages, their opening in Photoshop, save in JPEG format (i.e. the page Flattening), then import these JPEG files into an INDD file and re - export to PDF.  So, it seems that the flattening of the image is at stake.

  I looked online and tried to do some research to see if I can take care of flattening, etc. on my end if the client does not... but I'm not find definitive answers. I think my main questions are:

  1. can I export a PDF RGB flattened directly from InDesign

  OR

  2. can I I tweak/flatten my PDF in Acrobat Pro before sending it to the client?

  Thanks in advance for anyone who can point me in the right direction. I am generally able to understand these things on my own, but this one gives me the penalty.

  You can flatten on export by changing the compatibility Acrobat 4 setting, but it is probably better to do it in Acrobat Pro using the PDF Optimization tool.

• Migration problem reports: file not published online

  Hello everyone!
  
  I'm doing a migration of forms and reports on the Apex, but I can not download these reports 3: I got the error "XML report not published online", as you can see here.
  
  Anyone know why this problem appears, and why only 3 reports have this problem?
  I checked all the reports, but I couldn't find any big difference between these 3 and other...
  
  
  I also have another problem with reports settings: in the XML file, I "& param ' but Apex seems not to accept it. I modified the changing XML file "& param"to": param", but it still does not work.
  How should I write the settings in the XML file?
  
  
  Thanks in advance,
  Stone

  Hi Pierre,.

  Thanks again for the redirection on your sample XML report files.

  First, the file upload issue you reported related to the XML file containing a multibyte, but the file was not coded UTF - 8. When I saved the file with UTF-8 encoding value, I then could successfully download the file to my project of Conversion of forms. I noticed that your XML file contains several elements of with the SQL statements for your report. Even if such a file can be downloaded on your forms Conversion project, project pages associated with the reports only expect a element in the file and therefore will not work correctly. As a solution, I suggest that you take a backup of your XML file, and then edit the file to remove additional items . It will only contain a single element of with the SQL statement to be used in the conversion process.

  For reports with parameters, my suggested workaround solution would be to remove the parameter of the SQL statement references, download the report and then try to convert it. If successful, an interactive report Oracle APEX is generated, based on the SQL statement from the report of the Oracle. Once the interactive report has been generated successfully, update the Oracle APEX page to include a new point (e.g. list selection) takes over the possible user parameter values. Change the source of interactive report for the new reference point. The interactive report then only display information based on the setting selected by the user. I hope this work around will allow you to continue your conversion process. Please let me know how you get on and also if you have any other problems with the conversion process.

  Kind regards
  Hilary

• Apple Watch does not appear in the security/privacy settings my mac (2015)

  Apple Watch does not appear in the security/privacy settings unlock my mac (2015) for auto

  Hi abcd_bruce,

  Thanks for stopping by Apple Support communities. I understand that you are eager to implement the feature Auto Unlock on your MacBook Pro. It is a new system and I'll be happy to help you with this.

  Looks like you did a few steps already to help lift this step. In this article, automatically unlock your Mac with your Apple Watch, he goes over all the steps that must be done to implement this place. If you already followed all these steps and are still problems, then the next step would be to start the Mac in safemode, and then check if you are able to see the Apple Watch see the implementation of the security and privacy preferences.

  Try safe mode if your Mac does not end commissioning

  Have a good night!

• How can I know if private browsing works? The purple mask does not appear when I click on the mask icon. In my privacy settings "never remember" is selected.

  I'm trying to confirm private browsing works. At the moment, I have no way of knowing whether or not it is enabled. The purple mask, referred to in the help does not appear when selected. I should say in my privacy settings, I have never chosen "remember", for the story.

  Hi willpublx, when you have selected never "remember history" in the privacy options so you are actually in 'permanent private browsing mode' and that there will be an extra mask icon to indicate that.

• How options are related: "confidentiality > don't remember history ', ' privacy > settings customized user > permanent private browsing ' and ' security > remember passwords?

  It is said in support of the pages that the option ' Privacy > don't remember history ' is equivalent to private browsing.
  He said also that after you activate private browsing does not store history or passwords.

  So how are related options: "confidentiality > don't remember history ', ' confidentiality > settings customized user > permanent private browsing ' and ' security > remember passwords?

  (1) if I activate "Privacy > don't remember history" fact it also means that the passwords are not stored?

  (2) activate instead
  "Privacy > settings customized user > permanent private browsing."
  This still implies that passwords are not stored?

  3 If 1) or (2) are together, what is the role of the apparently independent option "security > remember passwords?

  I'm sorry but the logic of the user interface is not really clear for me

  Thanks for your help.

  1. Yes. Setting "Firefox will: don't remember history ' prompts you to restart Firefox, after which 'always use private browsing mode' will be checked. The option "Remember passwords for sites" will be disabled and unavailable (grayed out).

  2. Yes. It's the same thing.

  3. as I said, in this case the option "Remember passwords for sites" would be unavailable (grayed out). The rest of the time, this option allows to disable the registration of passwords not in private browsing mode.