Pro sticky screen iPad

Similar Questions

• All users 12.9 inch screen iPad Pro noted that it seems difficult more hard/more to own footprints on the screen?

  I use a cloth towel style is aggresiive a little more than a Microfiber cloth, because the Microfiber cloth was not a good job at all, the cleaning of the finger prints/finger oils out of my big iPad screen and even the fabric, I use now takes some time washing and wiping my finger oils of the my big screen iPad Pro.

  Anyone else noticing this problem since the time of purchase?

  If so, what are you using for more quickly and efficiently clean the screen bigger?

  Now, I have had my iPad Pro for seven months, and screen cleaning problem is to start getting anjoying / irritating.

  I use the same type of towel fabric on my iPad 1, 2 and 3 and the screens clean quickly and easily my finger paintings. No problems.

  What gives with the new Pro iPad models and the hardest screen cleaning?

  Thank you all!

  I use my iPad 2 Air and iPad Pro both, every day. I can't find the screen Pro harder to clean than the Air 2. I use the same clothes on both Microfiber, with a little water. I'll put a few drops of water in the center of the screen when laid flat, work-around with the light finger tip pressure suit and then use the Microfiber, finish by wiping in strokes a path across the screen.  Works very well on both devices.

• MIC Stand Pro 9.7 "iPad support

  What is the best microphone for a Pro 9.7 "iPad support?

  If you do a search for "micro support for iPad" you will find several options. Choose one you like. I haven't used one so I can't offer a suggestion.

• Why should I pay $ 28 on the App Store for Pages on my old MacBook Pro when I have it for free on my new MacBook Pro on my iPad on my iPhone?

  Why should I pay $ 28 on the App Store for Pages on my old MacBook Pro when I have it for free on my new MacBook Pro on my iPad on my iPhone?

  And I could ask the same question for the calculator on the iPad?

  Something I don't understand here...

  Nice day!

  Yanick

  If you have used any other processor of professional quality (for example, Microsoft Word), and then just go ahead and use the current culture of free (financially) applications on devices you mention. It will not take too long before you understand point Apple of giving them. No application in the world can open documents Pages but the most recent version.

  Free will begin to erode when Pages for Mac forget how to open a perfectly fine document that you saved an hour or two ago. Or you realize you have to press the SHIFT key every time you want a first word in a sentence. Or you can not bind the text boxes to the text layout advanced stream. Or you can't do data merge / e-mail. Table of contents page links or comments will not export to PDF.

  Pages is not a clone of Word, and you'll quickly realize that Pages input/export deal with the translation. Open a blank document. Type the letter "A". Export to Word .docx. It will be 494KO in size. Do the same thing in LibreOffice or MS Word and it will be 8 KB.

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• iOS 9.3.1 and Pro 9.7 "iPad battery widget disappeared

  Just got my new Pro 9.7 "iPad.  It came with ios 9.3 and I think that the battery widget was present... I remember seeing the battery of the Apple pencil when I place initially.

  I quickly upgraded to 9.3.1 and now see no battery widget.  I have Bluetooth paired device, the pencil of Apple which works fine but no battery widget.  Not sure whether it is a problem of iOS 9.3.1.

  A reboot has solved this problem in my iPad Pro.

  Michael

• How to list all the users on the Windows 8 Pro welcome screen

  I work for a small company based in the House of my boss of IT services. Because he runs the company, all the computers in the House are on a domain Active Directory (ease of management and control). Because he runs the company from his home, several of these computers are tablets/touch screens for his children, all upgraded to Windows 8 Pro.

  Currently, the default behavior of Windows 8 at startup is to display the Welcome screen showing the last user who opened a session with an option to switch to another user. If "Other user" is selected, a complete login prompt appears requesting a user name and password. This is standard fair for Windows 8, especially on a domain.
  He wants to do me is to find a way to allow a style of Windows XP (workgroup) Welcome screen displaying all the available avatars with user accounts, allowing so a child to click easily their user account and enter a picture password without ever seeing the on-screen keyboard.
  To rephrase: we want the Windows 8 Pro welcome screen to list all the (or specific, if possible) allowing anyone of you users connect to the computer without entering a user name and only enter a password (or picture password).
  I searched the web carefully and it seems that Microsoft can have deprecated this feature in an update of Windows 7 - many people shouting right lose their old welcome screen after an update. I read in the case of registry (removal of corrupt profiles and .default) hacks, security policy settings (interactive logon: do not display last user name = disabled), account policy (control userpasswords2 > uncheck: users must enter a password...) and a few other suggestions that had mixed results, which none apply to the present case , either because the settings are already in place, or because they are not available due to being on a domain.
  I'm open to exploration of any kind of registry or 3rd party software hacks that can provide this functionality. Win8 default behavior is absolutely horrible for tablets - it should be easy for multiple users to connect to a device without using a screen keyboard to enter their username and password. WIN8 is halfway there with passwords of photo, but we still have to enter a user name for all, but the user recently.
  Thanks in advance!

  Hi Jayce Nornin,

  Please be informed that he has no option to list all the users on the Windows 8 Pro welcome screen.

   

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• You have Adobe Acrobat pro for iPhone / iPad?

  You have Adobe Acrobat pro for iPhone / iPad? t

  Hey Joe,

  We do not have Adobe Acrobat Pro, but it takes Adobe Acrobat Reader app for iPhone/iPad: Adobe Acrobat Reader on the App Store

  Kind regards
  Rahul Tyagi

• First Pro CC screen appearance

  I am not satisfied with the appearance of the first Pro CC screen.  Settings / Appearance tab allows me to change the brightness of the dark background, but apparently nothing else.  Are there other options for screen appearance I'm missing?

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  Nope, that's all.

• iPad Pro 12.9 "screen darker when compared to Pro 9.7" iPad and iPad 2 Air

  Comparing the screens on the Apple Store, I noticed every 12.9 "Pros on display screens faded compared to the new 9.7" iPad 2 Air and my own iPhone Pros 6 Plus. I made your real was turned off and all the display settings are equal. I compared using the calendar application, because the difference was most obvious with a white background. Apple staff was unable to explain the difference in brightness, which has been seen on the new 9.7 "Pro, the IPad look older and my own phone. A staff member cited the 9.7 "Pro of new technology as the cause of the screen, but this does not explain why the Air 2 and my iPhone 6 were also brighter.

  I want to check on a different Apple Store but have not had the chance to get a still. Given that I don't know people on the forums have several iPads, I was wondering if you could compare and see if there is a difference. The Pro of 12.9 "had a problem of yellowing after launch, but I don't think it's the same problem. I couldn't find any other mention of this problem online.

  I took some photos while I was there. The Pro of 12.9 "has my thinking about it, but you can still see the faded screen. I couldn't get the Air iPad there because it was on another table. I really want to buy the biggest Pro, but not if there is a problem with the screen. This discoloration was observed on all the advantages they had on display.

  

  

  Anyone with two iPads that lets compare the screens?

• Biased Pro 12.9 iPad lock screen

  Hi, just did the update and have not noticed that my lock screen is is more centered (as horizontal), the time is now to the left of the screen. Anyone having this problem or can help, would be grateful! Or is it supposed to be this way?

  Thank you very much!

  Apparently this is supposed to be that way. We have been searching last night and could not find a way to change this

• Scratches on the Macbook pro retina screen.

  Hello

  I bought a Macbook pro 13 "in may 2015 Retina. In the last six months, I've noticed there are scratches that are developed not the screen. I do not use a cleaning on the screen lotion and dust with the brush dusting given to me by the retailer. He started with the corner of screens and finally spread on the screen.

  As such, there is no difference in the resolution of the screen, but I was wondering if the surface of the screen will crumble over time. Please let me know the solution for the same thing.

  Put the guard of screen help?

  There's this problem:

  http://www.MacRumors.com/2015/10/17/Apple-MBP-ar-coating-quality-program-stainga you.

  retina of anti-reflective display on the glass screen problem

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Mac Book Pro cracked screen inside, no damage to the outside

  Hello

  I woke up this morning with mac book open and off. I have seen that my screen was quite dirty and decided I have to clean fingerprints on it. I used a Clorox and a paper towel to clean. Once I finished I turned an and saw my screen cracked. When I rubbed my finger on the screen it there's no indication on the front or the back of the screen he was hit there. It is only within the screen. I took it to apple and they said it was an accident, when I washed only the screen, as I did with several Mac Book Pro, I bought in the past. I have Applecare, but he does not apparently. No where else on my mac does show that I have damage and I did a diagnosis, and there is nothing else wrong with my system. They said that I am $ 800 and it's just scandalous due to a stream for the super screen thin on the inside. I don't know where to go from here, but I've used Apple products in my life and being a college student, I don't have that kind of money to fix. This problem should of never happened. I do all my graphics and coding on my Mac and have always loved. I also have a case of black Tech21 surrounding for added protection so something like this has not happened. Please if there is any help I can get here, it would be highly appreciated.

  Benjamin Schmidt

  Make your case to a store manager, but it is difficult to claim "just happened by itself." Be nice to the staff of the store, you are basically arguing for special treatment.

  It does not mean you did anything on purpose, but the MacBook was responsible, if you are responsible for. The cause could be anything from a drop of abrupt changes in temperature. Who knows...

  Good luck!

• Save the MacBook Pro - white screen of death

  My macbook pro starts, I get the ringtone to start and then the white screen of death that led to the computer to activate the walk and walk. I bring in my computer for repairs, but I am not able to save anything as none of the start up works. I can not access the disk utility, I tried! I wonder if anyone has experienced this or has any suggestions on what to do before going for repairs.

  What model of MacBook Pro?

  Maybe this problem

  MacBook Pro (15-inch, mid 2010) intermittent black screen or the loss of video quality program is over - Apple Support

  http://www.Apple.com/support/MacBookPro-videoissues/

  What happens if you connect an external monitor?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• MAC PRO MULTI SCREEN OFF ROAD...

  Bus (20 gHz bandwidth) is a MacPro Thunderbold2 (end 2013) combined with AMD over-pants 300, allow the connection of 2 screens UWQHD at 60 Hz?

  (A) knowing a MacPro announced limitation:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

  (B) successful personally tested the following configuration:

  "Connection to a 34" UWQHD (3440 * 1440) display as a secondary screen on Imac27 ' Thunderbold (mid2011) port using a mini Display Port to Display Port cable.

  This configuration bridges for the limitation of the AMD Radeon of 512 MB of the Imac27 (mid2011).

  However, he has worked to keep a refresh rate of 60 Hz.

  (C) does anyone at - he tried to connect 2 * 34 "UWQHD (3440 * 1440) poster on the Bus Thunderbold 3 1 (ex: TB1 and TB2 ports) using a mini Display Port to Display Port (or native TB cable if TB screen like LG)?

  And this configuration works at 60 Hz?

  Final goal is to connect 6 UWQHD 34 "screen on a Mac Pro at 60 Hz.

  Thanks for your comments.

  I could now test the following configuration:

  2 screens on bus 1 to on the Mac Pro:

  Eizo ev2750 1 (2540 * 1440) on the TB0 port using an miniDP/DP cable

  +

  1 LG34UC88 (model LG with no port of TB) in 3440 * 1440 on TB1 port using an miniDP/DP cable

  Both work at 60 Hz non-interlaced.

  I believes that this positive answer my own question here above even if it wasn't 2 * 34 "UWQHD (it is always above the spec announce Apple).

  However, I have 3 questions to void it please:

  Q1: Anyone know if the AMD over-pants 300 since the Mac Pro supports the technology 'free' for the synchronization of AMD.

  AMD sent me to Apple because it seems Apple develop its own driver AMD cards used in Mac.

  (no answer until now...)

  Can Q2: Someone please explain what benefit we can get using a screen offering a port TB compared to a screen offering a port DP (the two being connected on a TB on a Mac port)

  It seems that we will get no graphical difference, but that the native CT will wake up faster than the RFP and offer chaining (for connecting a USB key or on the screen a light on the Mac).

  No confirmation will be welcome, thank you.

  Q3: Is it possible to change the TB on a Mac Pro parameter to tell the machine than on a TB specific port (ex: TB1) cable (and thus the signal) is DP.

  This would shorten the time to a screen using DP cable on port of TB of awakening. Thanks again.

  Best regards

  Michel0008