prob with startup

Similar Questions

• resolution of problems suggest prob with codecs? Remember to come to the top, not easy to use?

  the difficulty for the days? using D Link for the wireless, prob with codecssays convenience store? not easy to use?

  Your message is in the forum for the users of the software program anti-malware for Microsoft Security Essentials (MSE).  Don't know what "convenience store" you mean but MSE lacks a convenience store.

  If you are referring to a "convenience store" on your router, suggest to communicate with the D-Link Forum at http://forums.dlink.com/.

  Or you can ask for help in the Forum Windows http://answers.microsoft.com/en-us

  Good luck...

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• Dell inspiron E1505 with Windows Vista system restore to factory setting led by mistake. The operating system version is incompatible with Startup Repair tool

  I tried to restore my Dell Inspiron E1505 laptop to the factory setting.  I pressed F8 then selected repair and then Dell Factory Image Restore.  Used to format hard drive.  He formatted the hard drive and then he restored the system.  Suddenly, a small window pops up without any details, but saying "error".  I restarted the laptop, it entered into Startup Repair mode.  But even once showed error "operating system version is incompatible with startup repair".  I don't have my windows CD/DVD.  Although the windows sticker is still on the laptop.  Please advise me how to install the system on the laptop so I can use the same.  Please note that I am in Gurgaon (India).

  Thank you

  Hello

  Because the computer is located in a no start situation and you don't have the installation disc, it is best to contact the manufacturer for assistance.

• Version of the operating system incompatible with Startup Repair tool

  I'm trying to reimage dell inspiron 1525. Operating system is Windows Vista. Error received halfway through restoration. Has been reduced to system recovery options. Startup Repair has chosen to be tell version of operating system incompatible with Startup Repair tool. Now I cannot do anything else.

  Hello
   
  1. you use the correct version of the Vista disc to run Startup Repair?
  
  2 you also all error messages /codes when you startup repair?
   
  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.
   
  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.
   
  a. Insert the Windows Vista installation disc.
  b. restart your computer.
  c. If prompted, press any key to start Windows from the installation disc.
   
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
   
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. on the System Recovery Options menu, select the memory diagnostic tool.
   
  Once scanning is complete, check to see if the problem is resolved.
   
  Access the link below to learn more about Windows recovery options in Windows Vista.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem
   
  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.
   
  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.
   
  You can also contact Dell support and check if you need to replace any hardware.
   
  Aziz Nadeem - Microsoft Support

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where should I go? message on LED on officejet 6500 has more "Prob with ref doc printer 0 < 61011 bed.

  Where should I go?  message on LED on officejet 6500 has more "Prob with ref doc printer 0".<61011>

  See the steps in this troubleshooting page.

• How can I change the tabs that appear with startup?

  I have somehow accumulated a large number of tabs in a tab bar and would like to delete some and reorganize others

  You can find the homepage here:

  • Firefox > Preferences > General > startup: Homepage
  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Firefox supports several home pages separated by ' |' symbol (pipe).

  You can check for problems with the sessionstore.js file in the Firefox profile folder that stores the session data.
  When sessionstore.js is deleted, you lose App Tabs and groups of tabs and tabs open and you will have to recreate them, so possibly make a note or bookmarks.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• NEW Prob with the creation of Itunes folder

  With the help of wind 7. Sorry if I post in the wrong place... first post

  I use Itunes 10.  I tried to update recvd ' message cannot get server '.» I will update later, or can someone tell me the answer to this problem?

  My main problem is I moved my library in another drive.  Lost all my playlist, etc. (always have the files).  Tried many variations of repair by trying some other .itl file and .xml files. Now finally decided to REBUILD (have all music, etc.).  My BIG problem is that I can't start AGAIN.  I try and deleted all the folders to Itune.  Trying to FIX this prob. I created a situation where when ITunes all my Itune for opening files pop up on my desk.  I made changes in the preferences (location changed Itune file) but Itunes still removes the files on my desktop...  ICAN can't stop it. I uninstalled Ver 10 (after trying to update) and always the same prob.

  Please PLEASE HELP... Sorry to say, I have worked with it for 3 days and I got frustrated and lost. Please help me get this new database has started, and I'll pick the prob of update as soon as POSSIBLE.

  Thank you

  iTunes data appearing on the desktop may be the result of incorrect permissions. For more information, see fix for iTunes for Windows security permissions . Take a look at make a library of portable split. If you want to create a new library, you need to press on and hold the SHIFT key as you launch iTunes, then use the option to create a library. If you still have the old .itl file I can help you fix the library if you put all the pieces together in the standard layout.

  TT2

• Can I use a probe with my NI4461 to measure the 100vpp(permanent)?

  Hello

  I use a NI4461 card with 2 inputs and 2 outputs. I have a signal generator with a signal of 125 Hz 100vpp(permanent) I want to characterize using labview (FFT, amplitude, etc.).

  The limits of entry on the NI4461 being +/-42 .4V, I was hoping to use a X 10 probe, which is similar to a scope.

  However I find this works do not correctly in the mitigation of the probe doesn't seem to be a constant 10 x. Although my reach (with a second probe) reads 100vpp(permanent), my NI4461 detect 82Vpp.

  Am I missing something? Are there alternatives to read > 42.4 v reports on the 4461 with a probe?

  I checked and exchanged probes and they both work find on the scope, but not on the 4461. Is there a special probe that has a match of good impedance for the 4461 you can recommend?

  Thank you

  Thanks for the suggestion.

  I actually build an out two very large resistance voltage divider which seems to work fine.

  The circuit is simple, two resistors in series connected to the ground at the same time on my main unit. By attaching the son of sense of tension on a single resistance I can divide the voltage in two (two resistors have the same index). I calibrated the system and it seems to work.

  Thank you for your suggestions.

• laptop comes with Startup Repair tool and said then it cannot be resolved, then the laptop is blocked.

  Original title: Hi I am not a techi but my computer laptop girls arrives with the Startup Repair tool and said then it cannot be resolved, then the laptop is blocked. Help! What should I do? Be sure to talk to a techno-phobe.

  Just automatically go for boot errors and nothing more! Help

  Hi JacinthaDahl,

  1. you receive an error code or error message when you start your computer?

  2 have you made changes to your computer recently?

   
  
  I suggest you follow the methods and check if it helps.
   
   
  Method 1: Perform a startup repair, check to see if it helps.
  To run the Startup Repair tool by using the Windows Vista installation disc
   
   
  If you have the Windows Vista installation disc, follow these steps to use the Startup Repair tool:
  (a) Insert the installation disc.
   
  Note: The computer must be configured to start from a CD or a DVD. For more information on the configuration of the computer to start from a CD or a DVD, see the documentation provided with your computer.
   
  (b) restart the computer. To do this, click Start, click the arrow next to the button lock and then click on restart.
   
  Note: If you cannot restart the computer by using this method, use the power button to turn off the computer. Then, turn the computer back on.
  (c) set your preferred language and then click Next.
   
  Note: In most cases, the Startup Repair process starts automatically, and you do not have to select in the System Recovery Options menu.
   
  (d) click on repair your computer.
  (e) in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.
  (f) in the System Recovery Options menu, click Startup Repair to start the repair process.
  (g) when the repair process is complete, click Finish.
   
  Referral link: http://support.microsoft.com/kb/925810
   
   
  Method 2: Perform a restore of the system for the installation disc and check if it helps.
  Please follow these steps to do system restore
   
  (a) Insert the Windows Vista or Windows 7 DVD and then reboot the computer.
  (b) when you receive the following message appears, press a key: press any key to start from the CD or DVD.
  (c) set the following preferences and then click Next:
  i. the language to install.
  II. time and currency format.
  III. keyboard or input method.
   
  (d) click on repair your computer and select the operating system you want to repair, and then click Next.
  (e) click System Restore, and then click Next.
  (f) click on restore that you want to use and then click Next.
   
  Note: Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.
  (g) confirm the disks that you want to restore, and then click Next.
  (h) click Finish, and then click Yes when you are prompted.
  (i) when the system restore process is complete, click on restart to restart the computer.
  
  (j) after the computer restarts, click on close to confirm that the system restore process has finished successfully.
  Referral link: http://support.microsoft.com/kb/940765
   
   
  Method 3: You can also check out the link and check if it helps.
  http://support.Microsoft.com/kb/934540

   

• Control Panel and update of Windows fail to boot, Windows comes with Startup Repair tool regularly.

  Hello, we had problems with our computer Packard Bell for some time, but recently it has deteriorated with both the control panel and windows update is unable to start. In addition, we noticed that the Startup Repair appears fairly regularly too. We had to use Packard Bell restore a couple of times as Startup Repair did not resolve the problems. The problem with the control panel windows updated and started after the installation of updates after the last recovery of the computer. I noticed that the Panel works in safe mode, however, windows update does not work. After the course on problem reports and solutions, we noticed several mistakes "Windows update installation problem. When we clicked on a for more details, it appeared:

  A Windows Update was not installing correctly. Send the following information to Microsoft can help improve the software.

  Signature of the problem
  Problem event name: WindowsUpdateFailure
  ClientVersion: 7.4.7600.226
  Win32HResult: 80070426
  UpdateId: 00000000-0000-0000-0000-000000000000
  Scenario: Scan
  SourceId: 101
  Environment: unmanaged
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 2057

  Additional information about the problem
  Bucket ID: 719632728

  We have analyzed viruses and found nothing. Thank you for reading the question, a solution would be much appreciated, thanks.

  Hello

  Frequently, this error code occurs when the software licensing service is stopped. Click Start, type services.msc and press . Click on continue in the UAC prompt. Scroll the list to the software licensing service and click on it. Now click on start or restart option in the left column. Close the dialog box and restart Windows Update.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I have a prob with d3drm.dll

  a window appears sying "prog requires d3drm.dll which is no longer included in this version of windows" (vista ultimate). Ive tried to download said file but get then stopped in my tracks by an another prob, saying: "this file has no program associated with it for performing this action. Create an association in the Association contrl Panel set"How do the __ I do that I am only a layman. HELP, SAM

  It seems to me that you try to install a program that is not compatible with Vista.  What program is (and which version)?  You can check for the compatibility of the Vista Compatibility Center program at the: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.  You cannot create an association to a .dll file - this is an error message saying basically that you can not use the copied file to do what you wanted to do (because it is not included in Vista while it was probably included with the other previous operating systems of Windows).  It is an obsolete file and if this is required for the program to run then you probably will not be able to run this program under Vista.

  You can try running it in compatibility http://www.howtogeek.com/howto/windows-vista/using-windows-vista-compatibility-mode/ mode but I don't think it will work if the file is not located anywhere in the system (as seems to be the case), and the file is required to run the program.

  Sorry for the bad news, but see the program in the Compatibility Center and if it is compatible then we should be able to find a way to make it work despite this file problem.  If it's not compatible, then you have your answer.  Is it is not listed, then it is unknown, but maybe if it's probably not compatible.

  Good luck and I hope this has helped. Lorien - a - MCSE/MCSA/network + / A +.

• BlackBerry Smartphones little prob with my storm

  The prob I have is a simple... but an aggravation. In the upper left corner, there is a small yellow envelope with a '9' next to him... Wait wait I know I know he means I have 9message but I checked my voicemail by email from text sound empty all, when I get a text or something the number goes so somehow the phone thinks I have upper 9messages... I know not what it means or what I can do, any ideas? \

  Thank you

  -Ry

  -go through each of them again and make sure that you are not missing, I don't know you done thia already, but it has worked for 7, should work for the rest. You can also check the browser and push menu and look for messages from the browser.

  -If still not resolved, reseting try to take out the battery and put it back in.

• ProBook 6550 b: new Prob with drivers

  Hi just questions over to install Win7 on my laptop hp6550b, all this because the speakers conked... now the speakers work... and not much else not
  Here are the codes for 'yellow' Device Manager bits

  PCI simple Comm Contoller

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_146D103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_146D103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  Network controller
  PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086 & REV_35

  PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086

  PCI\VEN_8086 & DEV_4239 & CC_028000

  PCI\VEN_8086 & DEV_4239 & CC_0280

  Ethernet controller
  PCI\VEN_8086 & DEV_10EB & SUBSYS_1471103C & REV_05

  PCI\VEN_8086 & DEV_10EB & SUBSYS_1471103C

  PCI\VEN_8086 & DEV_10EB & CC_020000

  PCI\VEN_8086 & DEV_10EB & CC_0200

  (1) base system device

  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01

  PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C

  PCI VEN_1180 & DEV_E230 & CC_088000

  PCI VEN_1180 & DEV_E230 & CC_0880

  (2) base system device
  PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01

  PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C

  PCI VEN_1180 & DEV_E852 & CC_088000

  PCI VEN_1180 & DEV_E852 & CC_0880

  And 2 unknown device:

  Value ACPI\HPQ0004
  and

  USB\VID_138A & PID_0007 REV_0072

  USB\VID_138A & PID_0007

  I had installed about all the drivers on the site of HP drivers

  And the Tower say... except these few... hoping these will get my

  N wifi internet back :-)

  Thanks in advance
  Vlad

  Hi, Vlad:

  You need these drivers...

  PCI simple Comm Contoller:

  This package provides the driver Intel Management Engine components and the Interface.

  FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59684.exe

  Network controller:

  This package contains the required drivers to activate the adapter functionality taken on laptops Intel wireless LAN supported with supported operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58782.exe

  Ethernet controller:

  This package contains the driver for the Intel 82577LM and 82577LC Gigabit Ethernet Controller install package in support of the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53806.exe

  Device system base (1) & (2)

  This package contains the Ricoh Media Card Reader Driver for the notebook models and operating systems. The Ricoh Media Card Reader driver allows the multimedia card slot built-in.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46999.exe

  HPQ0004:

  This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.

  FTP://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53795.exe

  USB\VID_138A:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  FTP://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66915.exe