Probably a stupid question but does Vista have BACK?
If Vista has/uses BACK, how can I find?
Tags: Dell Drives
Similar Questions
-
Stupid question, how does a print back to back on the Officejet 6600/6700?
HP Officejet 6600/6700 model CV078A; Series: CN2231G0D9
Vista 32 bit
Could not find in the manuals or in the forum. With recent HP printers, I was able to print on both sides of the paper (for example, 1 side = Page 1; Side 2 = Page 2). I can't understand how to do this with this version. Do not see it in no more printing options. Simply print us page 1. Place it in the paper tray; can print page 2? What seems uncomfortable with such advanced machine.
Any ideas?
Thank you
Thanks BH. I think I found the solution. Your advice on Duplex helped. I sought advice and found that I needed to go to 'Print' > Options > Advanced > Print > and check "Print on the front of the sheet for duplex printing" and "print on the back of the sheet for duplex printing.
I retried the print job, and it seemed to work.
For the people of HP you this can be a problem in Microsoft. I guess that your parameters to make up for it during installation. Perhaps the settings I fall on an update of MS Word; Thus, others may work in the same question.
-
I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?
Hello
You can install a copy of the software on the second machine it's just you are authorized to use on one machine at a time.
You can check: how many computers can you install or run Adobe software on? ProDesignTools
End user FAQ license contracts
Please visit the given link to download CS6: applications download Creative Suite 6
Concerning
Bianka Attre
-
Series of Microsoft Windows XP Home Edition 2002 SP3
I lost power when a transformer blew on my street. I'm short Windows XP Home Edition Series 2002 Microsoft. I DO NOT have the original version that has been installed on my computer when I bought the PC.
However, I have a CD of reinstallation of Microsoft; but does not have my product key to activate Windows.
Here is the information I have:PLEASE TELL ME WHAT TO DO!
Thank you
Tony
E-mail address is removed from the privacy *.I can provide as much information it takes to get active Windows.
Windows version: Microsoft Windows XP Home Edition Series 2002 Service Pack 2 installed
System has been upgraded to Service Pack 3Name of the system: D845EPI_ Processor name: Intel (r) Celeron (r) CPU 2 .80GHz The name of the BIOS: BIOS Date: 26/09/03 15:01:32 worm: 08.00.08 Adapter name: NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation) Installed memory: 2.00 GB Default printer: Dell AIO Printer A92 Internet browser: Mozilla FireFox 9.0.1 (x 86 en - us)
2012 software-AVG current anti-virus & AVG PC Tune Up 2011
I have Microsoft XP Home Edition with only SP3 Bootable CD
I have a backup disk with my current data
________________________________________________________
Name of the operating system Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
Name of system DELL-7089676EEE
The system - INTEL_ manufacturer
System model D845EPI_
System Type X 86-based PC
Processor x 86 family 15 model 2 Stepping 9 GenuineIntel ~ 2799 Mhz
BIOS Version/Date Intel Corp., VA84510A.86A.0023.P08.0309261501, 26/09/2003
SMBIOS Version 2.3
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
DELL-7089676EEE\DELL user name
Time zone Eastern Standard Time
Total physical memory 048,00 MB 2
1.43 GB available physical memory
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Page file space 3.85 GB
Paging file C:\pagefile.sys
______________________________________________________________
Name NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
PCI\VEN_10DE & DEV_0110 & SUBSYS_00000000 & REV_B2\4 PNP device ID & 9BAF86 & 0 & 0008
Adapter Type GeForce2 MX/MX 400, NVIDIA compatible
Adapter Description NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
Adapter RAM 64.00 MB (67,108,864 bytes)
Installed Drivers nv4_disp.dll
6.14.10.5673 driver version
File INF nv4_disp.inf (section lvl4)
Color plans 1
4294967296 colors Table entries
Resolution 1024 x 768 x 60 hertz
32 bits/Pixel
0xFD000000-0xFDFFFFFF memory address
0xE8000000-0xEFFFFFFF memory address
IRQ channel, IRQ 16
Port of e/s-0x000003B0-0x000003BB
Port of e/s-0x000003C0-0x000003DF
Address 0xA0000-0xBFFFF
Pilot c:\windows\system32\drivers\nv4_mini.sys (6.14.10.5673, 1.81 MB (1 897 408 bytes), 30/11/2011-11:11)Please change your key of product before it is stolen! -also delete your personal information
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
-* in your own thread *, pleasePlease also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
http://www.Microsoft.com/howtotell/content.aspx?PG=COA -
I downloaded Windows 10 and it deleted my Adobe Acrobat and several other programs. I need to download again, but does not have the product key.
Hi Dean,
To locate your Acrobat serial n refer to find the serial number of your product Adobe quickly
Download Acrobat X, see Download Adobe Acrobat products. Standard, Pro | DC, XI, X
It could be useful!
Rayyan
-
I have CS4 and updated to OS x 7.5 to 10.5 Yosemite. Applications are still there, but can not be opened. After the restart, the application displays error 6. I have the
Original key, but does not have a place to enter.
We recommend that you reinstall the applications. You can use the Cleanup tool to remove the applications and products CS4 download from here.
-
OK, this is a really stupid question, but I'm trying to add a soundtrack to a project in first 10 elements, and the aide said section "click music in the action bar to display the Panel of music." I can't find a 'Music' box to click around. Can someone tell me please in the right direction?
cdmw
If your program is first items 10
a. you are in help for first items 11, not 10, and his description of the Action/music bar tab.
or
b. more unlikely since first elements 11 was not yet released, there is a typing error in the
First Elements 10 help.
In first 10, chronology workspace Elements, see Audio Tools (speaker icon) above the timeline and his choice of SmartSound.
Please review and study and then we can then what to do next.
Thank you.
RTA
-
I created an interactive navigation along the animated and imported and that the muse.
Animations works very well, but does not have the interactivity.
((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur comme il se doit),)
Anyone have an idea how I can fix this problem?Hello
As you use the edge with muse file you do not put the full URL.
Please try the code below.
Window.Open("..) /.. /arbeiten.html","_top");
Concerning
ViveK
-
How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?
Like I can't pin, I keep it at the top of the page with scroll effect 0.
It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.
Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.
-
Need to reinstall windows, but does not have any CD - Satellite Pro L20
Hi, I wanted to reinstall Windows XP home on my Satellite Pro L20, but do not have the software that my laptop came with (read the discs lost). I have a valid XP tone (like its stuck on the bottom of my laptop), but no disc so I tired using a copy of a cd of Windows XP home, which did not work, but let me go as far as the formatting of the hard drive.
So now I use Ubuntu, but want to reinstall Windows. Have valid product key, but no software to reinstall.
Any suggestions?
Thank you
Christopher
Valid key will not help you. This key belongs to the image recovery and copy included WXP he.
If you have two options. Either you order original Toshiba recovery image or use Microsoft installations CD key which belongs to this copy. All the necessary drivers, tools and utilities that you can download at Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads.Good luck!
-
Probably a stupid question about sending electronic mail but not be received (or sent)
Hello
I try to send an email from my BB. I use this code below...
Message msg = new Message();
try {}
String emailAddress = "[email protected]";
msg.addRecipient (Message.RecipientType.TO, new address (emailAddress, emailAddress));
String fromAddress = properties.fetch () .getFromEmailAddress ();
If (fromAddress.length () > 0) {}
msg.setFrom (new address (fromAddress, fromAddress));
}
If (properties.fetch () .isCopyEmailToSelf ()) {}
If (fromAddress.length () == 0) {}
Returns false;
} else {}
msg.addRecipient (Message.RecipientType.BCC, new address (fromAddress, fromAddress));
}
}
msg.setSubject ("Testing");
content
String content = "some test string";
msg.setContent (content);
Transport.Send (MSG);
} catch (AddressException e) {}
Returns false;
} catch (MessagingException e) {}
Returns false;
}I followed the tutorials in the knowledge base. I want users of my application to be able to configure the address and I don't want to save a copy of the email to any folder/email address on the phone.
I'm currently debugging the code and it does throw an exception, and it is correctly signed. However, I get e-mails in the e-mail account 'to' or 'to' if account I have configured the application to bcc a copy for the account.
Do I need to configure the appliance to send emails? I don't want to use any account e-mail on the device.
Thank you
SArah
"can be sent to programtically without going through an email account set up on the phone?
There is no API that I'm aware of that will support this.
"When you say"works"he throws any exceptions, but it sends no emails no more"
Doing so on the Simulator, not the end of the email to the top in the list of Messages. The Simulator will attempt to send it and then, since you don't have the ESS work, give up.
"If the user must create an account on the phone, do I need to modify the code to use it.
As mentioned, I don't think that this code works without an account on the phone, so I think that this question is moot.
"If you use the e-mail account on the device how is, you can define an address «of» the message?
I don't think you can define an address.
"you have more than one e-mail account on a device?
Yes.
You might find these links useful:
http://supportforums.BlackBerry.com/T5/Java-development/sending-email-messages/Ta-p/442790
Do a search too, I'm sure you'll find other useful things.
-
Need to reinstall Vista OEM laptop computer, but does not have install media
I already have the serial number of my windows that was on my laptop and now I need to install it on the same laptop. but I don't have the windows CD. So, I have to download it. but I can't find any valid and functional link to be on microsoft or any other Web site. is there anywhere to download?
* original title - where can I download a windows vista Enterprise edition? *
Hello
There is no available free and legal Vista download
Here are the different ways to reinstall vista:
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
Save all data, because it will be lost, do the above
-
Probably stupid question, but - how to remove a clip of movement tracking?
I was playing with the functionality of tracking movement and think that I can come up with a way to do the work to highlight my now famous 'football '.
However, I need to remove the effect (s) that I added to the clip so that I can start fresh motion tracking. For the life of me I can't understand how to remove!
This can be a very basic question - and I'm sorry, but I can't find the answer. I can not just delete the original yellow followed - boxes
Thank you in advance for your help!
Kim
To remove the Tracking Motion, just delete the chart you attached to it. There is no need to remove the object itself.
But you can if you wish. Just click to select the item and then click the motion tracking tool. Right-click on the blue or yellow squares, and then select Delete.
-
Good, then my brother downloaded trials of Adobe After Effects, first, on his laptop to make sure they worked. It's also on behalf of Adobe. A couple days ago and it ended up giving me his laptop (it was an old, and as I said, he just wanted to know if they worked) and now I want to download these trials, but when I try to download, it is said that the tests are rest 28 days, but I want to re-download the whole 30 days. I uninstalled creative cloud and programs and quit on my own account, Adobe, but it had the same result. Help, please!
Please see:download and install apps from the non-Creative Cloud trial
It cannot be extended.
You can subscribe to the membership plan annual creative cloud.
Pricing plans and creative Cloud membership | Adobe Creative Cloud
Please go through the refund policy:
Cancel your membership creative cloud
I hope this helps.
Concerning
Megha Rawat
-
I just want to know how to get the "button new tab" displayed on the tab bar.
Try this:
View > toolbars > customize
and see if the 'New tab' button is there. If this is the case, make it slide and put it anywhere you want.
Maybe you are looking for
-
SM951 blade ssd for Mac Pro 5.1 - AHCI or NVME
Hello I recently updated my old 3.1 latest 5.1. I also bought a m2 lycom til pciE card and a Samsung SM951 ssd. HOWEVER, I am not able to see the ssd in the finder or disk utility. I bought the NVME version. I think maybe I should have ordered the AH
-
Remove AOKP and dating back to stock sony
Hello I ran AOKP on my z2 for awhile now, but the work gave me a paid for phone so I need is no longer the z2. I have a buyer for it, however (and understandably) they would like it to be as it came from the factory in terms of software etc. for the
-
Can I deploy WebWorks app on several private aircraft?
Hey! Sorry for the noob question... I'm new on this. I developed an application of training, and I don't want to put it on App world. I want to just deploy in about 10 PlayBooks. How / can I do? Thank you.
-
Error, call after the application of the phone through my application device
Hi all 1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75 2 opportunity BB JDE 4.7 3 problems is the following: I am trying to invoke application of the phone device/Simulator for my application. I am able to launch and to appeal,
-
CUCM 8.5.1 with vmware ESXi 5 on UCS C250 M2 supported?
Hi all. My name is Shin Jcob. I'm Korean. So I can't speak English. But I have question and I want to know this information. Now, my client use the CUCM 8.5.1 with vmware ESXi5 UCS C250 m2. Unfortunately, it was to issue. T.T Problem is error Vmware