Problem ACS 4.0 and Server RSA Token

Similar Questions

• 3005 integrated VPN with ACS and server RSA auth

  Hi guys, I have a VPN 3005, using the version 4.7.2.B version, and I have the following problem.

  When a remote user using the Cisco VPN client tries to connect to the VPN 3005, it must try twice to authenticate.

  The first test, the user is authenticated, but the connection is immediately undermined by the peer.

  After the second attempt, the user is authenticated ok.

  Pablo,

  When you use RADIUS authentication on the hub, the ACS server will automatically send all the attributes of the user towards the concentrator for the user who is connecting. There is no need to have the authorization to be configured on the RADIUS server.

  According to the newspapers, it looks like the IP pool is the problem.

  [GroupP] user group [tuser] obtained IP addr (192.168.32.128) before launching the Cfg Mode (active XAuth)

  Subnet mask of the user [tuser] sending [GroupP] (255.255.255.224) group to the remote client

  User group [GroupP] [tuser] attempt to assign network or broadcast IP address, remove (192.168.32.128) of the

  After that, I see the customer negotiation again and the client is connected.

  Thus, the IP address is removed from the pool. Please make sure that you set up a pool that does not have a broadcast IP address.

  Thank you

  Gilbert

  Write it down, if this post can help.

• Using a Cisco VPN on iPad and incorporating RSA tokens

  Hello community of Cisco,

  I have what seems like a simple question.  I have almost no experience network so hopefully someone here can answer that.  I have this project iPad for my internship in which they want to create a remote access to their network using a VPN and a soft/hard security token.  It seems that they already use hard tokens RSA for their current home VPN connections.  They use portable computers to their home but want to start using iPads as well.  So my question is, an iPad can support a Cisco VPN using hard tokens RSA authentication? I just need a concrete answer to the management of work and literally just give them somewhere to start.  Thank you for taking the time to read my question and reply.

  Phil

  Phil,

  AnyConnect on iphone/ipad/ipod should be able to handle hardtoken auth, but with softoken itegration could be problematic (the last time I heard that it was not supported at all).

  M.

• Problems with PIX 501 and Server MS Cert

  Hi all

  I have two problems with my PIX 501:

  1. registration works well. The pix has a certificate and use it with SSL and VPN connections. But after a refill, the pix certificate is lost and it has regenerated again self-signed certificate!

  Yes, I wrote mem and ca records all!

  2. at the request of ca CRL , I get the following debugging:

  Crypto CA thread wakes!

  CRYPTO_PKI: Cannot be named County ava

  CRYPTO_PKI: transaction GetCRL completed

  Crypto CA thread sleeps!

  CI thread wakes!

  And the CRL is empty.

  Does anyone have any idea?

  Bert Koelewijn

  Not sure about 1, but 2 is usually caused by the COP (Point of Distribution of CRL, basically the situation where the PIX can download the Revocation list from) listed in cert CA is in a format the PIX does not, generally an LDAP URL.

  Check the following prayer:

  Open the administration tool of CA (Certification Authority) then

  (1) right click on the name of CA and choose 'properties '.

  2) click on the tab "Policy Module".

  3) click on the button "configure."

  4) click on the tab "X.509 extensions".

  > From there, it can display the list of the "CRL Distribution Points".

  Turn off everything that isn't HTTP.

  You need to reinstall the CERT in the PIX, I think, but then it should be able to download the CRL through HTTP instead of LDAP.

• SSO with WebVPN ASA using RSA tokens

  Current configuration:

  Chip & PIN the user authenticates for-> ASA5510 8.2 Clientless VPN-> past to the 7.2 SDI RSA Authentication Manager.

  I've got of authentication works great, at the first connection, users can connect with their AD usernames and RSA tokens and generate his pin code.

  We used to use ACS express and their advertising information for vpn authentication, but now we have to two factors of authentication.

  Is it possible to some how to maintain SSO so that when the user authenticates via its RSA token they can always browse through OWA, Sharepoint, CIFS (file share) without having to enter their credentials for the AD?

  Any help or information is much appreciated.

  Thank you

  You can activate the field "internal password" on the customization of WebVPN and also re-name-the ("Password AD" for example) and then configure the entries in the auto-code of access for internal URLS on NTLM.  Such that when the guest servers the WebVPN session will send the user name used to connect to the ASA but send the internal password captured during the connection instead of the password used to connect to the WebVPN himself.

  The only problem I saw during the test, there is no seam to be a graceful way to establishing a password incorrect or missing, then NTLM would fail and fall back basic over ssl.   Finally it would block the AD accounts based on URL how much the user has tried when the password entered when the connection is bad or missing (because it failed to connect to the WebVPN).

• Remote access VPN integration with RSA token

  Hello friends,

  I currently have an ASA 5520 9.0 focusing distance french authenticated VPN access a Radius of the ACS server. I also have a server ACS Ganymede + allowing to authenticate access to network devices (routers, switches, etc.). My Manager asked me to include a second level of authentication through RSA token´s. Question´s:

  How does it work?

  Can I use my ACS Ganymede + as a method of redundancy for authentication of the VPN´s in the case where my Radius server goes down?

  I can use my ACS server RADIUS as a method for redundancy for managing my network devices in the case of authentication my Ganymede + server goes down?

  In addition, the RSA token can be used to authenticate access to manage network devices?

  Any comments will be appreciated.

  Kind regards!

  RSA has built in the radius server and itself it can serve as a factor of two.

  using Token RSA server inside itself is two factor when you use a PIN and access code.

  Using of Ganymede + for VPN is not possible.

  Check with your administrator RSA for the integration steps.

  Is that you can directly integrate the ASA with RSA and integrate with RSA ACS as well.

  This way you have redundancy in the RSA server.

  http://www.Cisco.com/c/en/us/support/docs/security/secure-access-control...

  http://www.Cisco.com/c/en/us/support/docs/security-VPN/SecureID-SDI/1163...

  Rate if useful :)

  Knowledge sharing makes you immortal.

  Kind regards

  Ed

• ACS 5.4 and Juniper J-Web

  Hello

  I have set up a box of the ACS 5.4 and will test the devices on it.

  Cisco and Juniper, both works well with GANYMEDE

  I can connect both the use of SSH or Telnet but my problem is the Juniper J-Web GUI

  I can't access the J-web no problem with the root account.

  I can't seem to make it work, no matter what I try. Here is my shell of the GBA box

  

  And the following configuration of Juniper.  I tried to bind the local-user-name attribute to the remote and remoteadmin with no luck. Anyone got any ideas how I can fix this problem? Or if its even possible?

  version 9.6R1.13;

  System {}

  host name of Juniper-pare-fire;

  authentication-order [tacplus password];

  {root-authentication

  password encrypted "$1$ $1tRuy9o2 LwSPxNwe4XGNMOMIMo1pd1"; # SECRET - DATA

  }

  {tacplus-Server

  10.251.200.25 {}

  secret ' $9$ zaUL6/AtuOIRS5QF/CuEhws2 "; # SECRET - DATA

  Timeout 10;

  Single-connection;

  }

  }

  accounting {}

  events [connection change-journal interactive-commands];

  {destination}

  tacplus;

  }

  }

  {Login

  the user admin {}

  UID, 2001;

  root class;

  {authentication

  password encrypted "$1$ MNUZBLFW$ X2sJL/UTgRYcgBNV4RLe.0"; # SECRET - DATA

  }

  }

  user remote {}

  full name of the "remote user";

  UID 2025;

  operator class;

  }

  the user remoteadmin {}

  full name of "Remote Admin";

  UID 2026;

  root class;

  }

  }

  services {}

  SSH;

  Telnet;

  Web-management {}

  {https}

  System - certificate generated;

  interface fe-0/0/0.0;

  I worked on almost similar issues today and he confirmed that he is able to access J-WEB with the credentials of Ganymede. You can check the config here: https://supportforums.cisco.com/message/3953224#3953224

  Through your config it seems that you have not defined/created classes as he did:

  for example:

  {Login

  class CLASS Number {}

  permissions [view configuration];

  }

  class CLASS RW {}

  permissions in full;

  }

  user {JUNOS-RO

  UID 2000;

  Jatin kone
  -Does the rate of useful messages-

• Activating game FSX error "Unable to Activate Online, a technical problem occurred while accessing the server"

  Original title: FSX Activation game

  Gentlemen: after years of use in FSX (Microsoft Flight Simulator X).  Now, I ran into a problem of Activation. His version of "Unable to Activate Online, a technical problem occurred while accessing the server, license authorization was not successful, we apologize for any inconvenience"...  Support for the game ended last year. Is this in any way about this? Or is it temporary problem? "My first post" thank you... P.S. When MS comes out with a new Flight Simulator thanks...

  Gentlemen: Problem 'Resolved' I went in FSX.exe properties and on the Compatibility tab, Switched setting the compatibility to Win XP SP3 for Windows 7. And it worked the active game. Thank you

  for the info and try to help. Simple, I hope someone else can learn from this. Thank you!

• WRT54GS2 v1 connection expired and server not found

  OK I got the connection expired issues and server not found on both my PC and my Laptop.I I use Zoom ADSL ISP x 5 provided. series 1605. I have a router Linksys WRT54GS2. I followed the installation program in full and was surfing without delay. The problem started there when I bought the router and plugged in about 5 months. I already spoke with technology specialists to my ISP and they said that I have an excellent DSL connection and they have not seen any problems at their end. I had disconnected the router completely my network and removed the Ethernet cable and hooked the cable directly to a DSL modem and had no problems until I plugged the router in the modem. I factory reset the router a few times and implemented accordingly to make sure everything was good. Well, I still have errors in time-out for laptops and PCs. I have tried almost everything in the book and I'm out of ideas. Am I missing something here? Any help would be greatly appreciated.

  I tried changing the settings through the router and nothing seems to work. I checked both PC and laptop computer for viruses and nothing. I talked to my ISP and they tell me that my DSL connection is excellent and which was not disconnects or connection has expired at their end. It is located between my router and two computers. An Ethernet cable is plugged directly from the computer to a DSL modem. And an Ethernet cable is connected directly to the rear of the router. I am just totally stumped. The internet is totally fine when I cut out the router completely. I have no disconnects when the main PC is connected to the DSL modem with router disconnected completely. I have reset the router completely and followed Linksys technical support online for the T and I still get the connection has expired. Initially, I got a Belkin wireless router and thus became the message timeout through it. I thought something was wrong with this one so I went out and bought a Linksys WRT54GS2 router Linksys Wireless G. can someone offer some advice or ideas that I have not already tried? Please? The wife and I are really frustrated.

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!

• WLC / ACS / AD - domain and laptops no - domain (802. 1 X / PEAP)

  Hi all

  I implement a solution based on 4404 WLC, 1113 ACS and Microsoft AD. What I want to achieve is to have two WIFI (SSID), that can be used by users on laptops of the domain, the other can be used by the users in the domain on personal laptops. Field portable computers will have full connectivity, but personal laptops will be restricted.

  I created the two SSID using 802. 1 X by ACS / Remote Agent and can authenticate and connection OK.

  I thought I should have user auth and auth machine for laptops of area but just user auth for personal laptops.

  I have unauthenticated machines go to one group ACS or blocked, but I need to enable them in if they are on the SSID restricted. I can't quite understand how to have two SSID is authenticating with the same ACS / AD - one green and the other.

  I'm on the right track?

  Anyone done this before or have any bright ideas?

  See you soon,.

  John

  With the use of WLAN access based on the SSID, users can be authenticated based on the SSID they use to connect to the WLAN. The Cisco Secure ACS server is used to authenticate users. Authentication happens in two stages on the Cisco Secure ACS:

  1 authentication EAP

  2 resulting SSID authentication of network (NARS) on Cisco Secure ACS Access Restrictions

  For the new designation and configuraiton following URL can help you:

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml

• ACS 4.0 and IBM TSCM

  Hello

  I try to load the attributes of the CNA for IBM Corporation (TSCM) of the FTP (the attributes of the NAC management), but these do not appear in the system

  Configuration-> Configuration-> CSV connection failed attempts Configuration or CSV file past Authentication Configuration file.

  My server is ACS 4.0 device. On ACS 3.3 my attributes of the NAC is working well.

  [attr #0]

  Vendor id = 2

  name of the vendor = IBM Corporation

  application = 50 ID

  SCM = application name

  attribute id = 00020

  attribute name = political Version

  Profile attribute = off

  type of the attribute = string

  [attr #1]

  Vendor id = 2

  name of the vendor = IBM Corporation

  application = 50 ID

  SCM = application name

  attribute id = 00021

  name of the attribute = number of Violation

  Profile attribute = off

  type of attribute unsigned whole =

  [attr #2]

  Vendor id = 2

  name of the vendor = IBM Corporation

  application = 50 ID

  SCM = application name

  attribute id = 00010

  Action = attribute name

  Out = attribute profile

  the attribute type = String

  I loaded the list with attributes for Symantec on ACS 4.0 and it is OK, but for Tivoli Security Compliance doesn't work.

  Please help me if you have a solutions!

  Thank you!

  Hello

  Well Yes, you can't have a space between the name of the seller, I case that after loading the file I do not have the attribute of the GBA unit, but can see logging. After the reboot of the ACS that's ok.

  I also, can deployment of the NAC with IBM TSCM, you share the experince? What version of client TSCM, we should use? I can't get the 5.1.0 version but it looks like no need version 5.1.2 above only can patch the last update.

  Thank you

• Ethernet link to the bridge network and server

  I'm not an expert and hope that I do not use the wrong terminology, but I have an intermittent fault which has become more or less permanent. My major son put up for me a computer with Windows 8 as its operating system and a server for storage, connected by a cable to transfer files. The computer has its own router, with which it communicates with the local network based on a router and modem in the next room. There is a network bridge to access the internet. Initially (January 2013) it worked well. Sometimes, I couldn't connect to the server immediately, but simply another attempt was enough to access it, and he had no problem with the internet connection.

  More recently (late July and August 2013), it became more difficult to access the server and now seems permanently impossible, the server simply showing with a red X across as one of the devices on the computer page. The Internet becomes also more difficult, although there is no need for the server or available to arrive and still connects for a short while before disconnect. In July, the internet can usually be restored by turning off the modem and the router, and when they were on again to restart Windows 8, but that no longer works. I tried to reset the computer to the previous settings, but without success. I also tried the diagnostics tools, but generally, they fail to address the issues identified, except for an occasional brief of the internet. Until today, it has always been possible to show the LAN on the network page, including the iMac computer and printer next to the router and the modem, but today the network folder showed most of the time as empty, any diagnosis I ran in the attempt to identify and connect to the local network, which today needs to manually connect even if automatic connection is checked. Conversely the iMac can still see the computer Windows 8 when he is awake through the LAN, but only in January, he sees the server.

  The error or the troubleshooting messages that have been published are (1) to the server: the (network) path could not be found, or the name is already used. The IP given my son is 192.168.0.101, I tried and failed to find in the browser of my iMac, which does not suggest that it is already in use. Even if it wasn't a valid IP address, it would not have worked between January and July.
  (2) for internet access: reset of the card of network bridge that can force a reboot with a reference to the AREA of PAGE_FAULT_IN_NONPAGED_ that I can't continue without an internet connection. unresolved issues can include one or all of the connection between your modem cable, router or point of access and the Internet is broken. "Network bridge" is not a valid IP configuration. the default gateway is not available. The computer in the other room has had uninterrupted access to the internet, so it is unlikely that the router or the modem it are at fault, who leaves the access point or the configuration of the network gateway. I found some of these error messages in the discussions on Windows 7, but not for Windows 8.

  Finally, the watch status bar above all a network with limited access and a connected LAN ethernet bridge, which is not enough to bring me to the server or the internet; However, today the necessary local network setting procedure of discovery of devices running and by ticking the automatic connection to the LAN router in the next room, although both had previously been functioning. Is this the consequence of Windows updates downloaded and installed since January? Very briefly this afternoon after having restorng the settings they had on August 5, the convenience store was able to solve the problem of the bridge network, only for access to the internet to be cut shortly afterwards for lack of a valid IP, a problem solved configuration a few minutes before. Would it be possible to obtain internet access directly via the LAN network without the need for a network bridge, or is it a mistaken assumption on my part? Even if this is right, remains the problem of access to the server. Any thoughts anyone?

  Hi Clive,.

  If you have included a lot of details about this question in the thread, I was unable to get a clear picture of the network configuration you have. What is the topology of the network that you set up?               How the server is connected to the network? What is a Client-Server network model you have?

  If Yes, then this problem is better suited for it professionals about TechNet Forums that are well equipped with the knowledge of Client-Server network issue. Please post your question in the TechNet Windows 8 IT Pro Networking Forums from this link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information is useful.

• Error: "sorry, but a problem occurred on the build server.

  I deleted a last app generated in https://build.phonegap.com/apps , so a message: ' I'm sorry, but a problem occurred on the build server "appeared. So when I try to create/generate a new application by pressing a button [App] in the top menu, the same message always appearing, and the system doesn't let me create any application. How to eliminate this message or / and how do I create a new application?

  Well, I just tried to sign another browser with a new session, so everything is working now. So, I guess, there was a problem with a browser's cache.

• Project and server are not accessible! (175002)

  This is the error message I get whenever I try to use Dreamweaver to connect to my server:

  "Project and server are not accessible! (175002).

  I know that this subject has developed for people using Subversion. But I don't use a Subversion.

  It never happened until I made the last update to Dreamweaver.

  Please notify.

  Thank you!

  The f

  Because this is a Subversion error, I suspect that Dreamweaver tries to access the repository, and as you have not, you get the error.

  How to solve this problem is to develop the files Panel by clicking on the icon at the far right:

  

  Then select the icon for the remote server.

  

  You can then restore the files to normal size panel. This should solve the problem.