Problem adding new table.

Similar Questions

• Problem adding new zones of text in older PDF

  We have a set of PDF files created at the origin of a GIS mapping program. These files PDF is securities that are incorrect. Adobe Acrobat Pro, we can go to tools > reviews > text box and text new boxes/new titles on top the incorrect original titles. No problem, right?

  Evil. When the PDF is closed and reopened, we see very briefly that the incorrect title of old/original before the new title box appears above him. Is there a way to fix this? (Note: we tried to open the PDF in Illustrator and edit, but it used open.) I severalncompatible ferrors in Ontario).

  Thank you

  Acrobat Pro, use the redaction tool.

• Problem adding new map video to p6-2310

  I have the Pavilion P6-2310 (8.1 Windows 64-bit) and I would like to add a new video card in the empty PCI-E slot in the machine.  I would also like to keep the embedded video feature that I am looking to drive 3 monitors.  I have an older GeForce 7300LE I tried to put in last night and was able to get the card works by turning off Secure Boot and by activating the Mode of inheritance in the BIOS, but then the machine would not recognize the embedded video.

  There is no settings in the BIOS to enable/disable integrated video (BIOS is FRIEND 8.04), so I wonder if there was something to keep the car video while using a PCI-E graphics card.

  Any help would be greatly appreciated!

  Hello:

  When you install a discrete video card, the integrated graphics card is automatically disabled.

  Please consult the video card to the motherboard of your PC on the link below.

  http://support.HP.com/us-en/document/c03329340

• problem adding new iSCSI LUN

  I hope it is easy.

  I currently have 5 ESX host 3.5 all attach to two LUNS on our Dell NAS of the same logic.

  I need to add a third storage pool, to which I will possibly migrate approximately 1/2 of my guests.

  I have created the LUN used management tools of equal sense to grant access to one of my hosts and I refreshed my adapter of storage iSCSI (software).

  I see in my tools of logical equality that my host is connected to the new LUN.

  However, the logic unit number does not appear in my hosts lists ties LUN (on the section of the Configuration tab storage card) and it does not appear when I try to add storage in the storage of the configuration page section.

  I tried to rebootiing the host, but has not made all the difference.

  I forget something obvious?

  Thank you

  .. .pjpg

  Have you checked your vmkernel newspaper to see if there is any useful messages?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Problems adding new host as Eval

  I have 4 hosts in a cluster, all who have exhausted all of the licenses. I have a test server I installed ESX on which I want to just use it as an eval. I created a new data center for it and when I go to add the host I get the error "there are not enough licenses to perform this operation.

  I don't understand why I can't do if I want to just eval this host? It should not need an available license right?

  Thank you.

  You can evaluate it as a facilitator of stand alone, but if you want to add it to an instance of vCenter you must always have available vcenter agent licenses.

• Problem with new table

  I would be grateful someone checking this out for me - can't see where I'm wrong.

  On stage, I have 6 movies with instance name box1_btn, box2_btn etc.  Each contains another movie instantiates miniSubmenu.  miniSubmenu contains a dynamic text with instance name btnText.

  for (var z = 0; z < 4; z ++) {}
  var buttonName = 'box' + (z + 1) + "_btn.miniSubmenu.btnText";
  arrSubmenu [z] .itemBrief = buttonName;
  arrSubmenu [z] .itemBrief = this.buttonName.btnText;
  trace (arrSubmenu [z] .itemBrief);     This locates properly
  trace (ButtonName);                      I believe that this traces correctly, IE "box1_btn.miniSubmenu.btnText" etc.

  }

  Dynamic text is left blank.

  Can I not use a variable for a movieclip name?  I don't know that I have a past.  I tried using a table (arrMCs.push ("box"+(z+1) +"_btn.miniSubmenu.btnText")); but that no longer works.

  Thank you

  The first line, you assign a string value to the variable, then assign a different value to the variable, which you define essentially as another string (dynamic text).  You can't directly target an object using a string value, you must use the notation of support to have the interpreted string as the instance name.

  I guess that you end up wanting to do something like...

  arrSubmenu [z] .itemBrief = box1_btn.miniSubmenu.btnText.text;

  So, to do this in a loop...

  for (var z = 0; z)<4; z++)="">
  Cette.miniSubmenu.btnText.text ["box" +(z+1) + '_btn'] is arrSubmenu [z] .itemBrief;.

  }

• Problem with adding new storage to the CDV provider profile

  Hi all

  I have problem with adding new storage to the CDV provider profile.

  My ENV:

  VCD Version 5.5 latest

  vCenter 5.5

  VCDDB - SQL

  I created the environment with two profiles of storage for the first time and it's work well (the storage profile created before I joined the vCenter on the VCD)

  I created tags and he attributed to the data store and I see the new VM storage through the vSphere web client policy.

  I can also see VMS on the VCDDB the dbo.storage_profile_inv the new storage policy table and when I create new provider TDC I can't.

  What I'm trying:

  1 Refresh the storage via the VCD (right click on the attached vCenter) profile

  2. restart the inventory and the profile based on the vCenter servers

  3. restart the VCD and vCenter servers

  Help, please

  You can just follow KB 2075366.

• Replicat breaks down. What new table added to the source

  Hi, I use a gr 10, 2 on Linux configuration (using the MA) and then a 11g. I have a setup of goldengate. Everything seems to work fine except when it adds a table to the source that it reproduces on target? and the replicat gets abbened-ed to restarting
  
  My param extracted
  
  -extract ext1 param-
  extract ext1
  TRANLOGOPTIONS LOGRETENTION DISABLED
  -connection to the database.
  username password XXXXXXXX XXXXXXXX
  -hostname and port for trail-
  EXTTRAIL/u02/gg/dirdat/ea
  discardfile /u02/gg/discard/ext1_discard.txt,purge
  DDL INCLUDE ALL
  table SCOTT.*;
  table HR.*
  package SCOTT.*;
  
  is my param replicat
  
  replicat Rep1
  -the source and target definitions
  ASSUMETARGETDEFS
  -connection to database target-
  XXXXX UserID, password XXXXXXX
  -file for dicarded transaction-
  discardfile mnt/gg/discard/rep1_discard.txt, append, megabytes 10
  support - ddl
  DDL INCLUDE ALL
  DEFAULT DDLERROR IGNORES RETRYOP
  : Specify the table mapping.
  map SCOTT.*, target SCOTT.*;
  
  Thanks for the help
  
  Published by: Aj05 on February 15, 2012 13:49

  Create a new table of test and follow his creation (or error) from source to the target. Scott on the target has privileges to create tables?

  In addition, check the syntax in your snippet. The line for HR is missing a semicolon. And what is your reference to use the PACKAGE in the excerpt?

• Adding new partition in the table are

  Hello
  
  Oracle 9i
  Windows 2003 operating system
  
  The main entry/exit table is one of the base tables that has a large number of records and a very high success rate, and to avoid poor performance that may occur in such cases, Oracle Table partitioning technique has been examined in the early stages of the implementation of the system.
  
  Unfortunately, the technique used to divide data based on the year of the transaction considered the year 2010 as the last specific partition, so all records created after this year is gathered in a single partition and this may cause poor performance in the years to come.
  
  Are required to add another 10 partitions; up to the year 2020 taking into account that the downtime should be close to zero.
  
  Ground:
  
  According to my knowledge
  
  for this, so we can create a new table with the same columns and add required 10 more partitions, and if we take 2 scenarios like
  
  export/imp
  insertion in the new table select * from < table > old
  
  What is the best, and if we take exp/imp, if her take a few hours of time to complete a task... what will happen for the updates as insert, update, and delete in this time what will be the impact on the import... I mean if all committed tarnscations... These tarnscations automatically add to the table are not.
  
  Please tell me what is the best and the tarnscations should not effect... pls tell me how excatly we can complete the task.
  
  Concerning
  873393

  In my script, I have a DROP TABLE because I'll put up a reproducible demonstration. I can run the script repeatedly and regenerate the same demo data!
  In your environment you would not fall off the table!
  To simplify the demo for you: IGNORE the DROP TABLE command. Pretend it does not exist.

  Hemant K Collette

• Possible to option and click to add a new table lines WITH borders

  I recently "upgraded" to the latest version of the Pages. In the version previous (Pages ' 09), option-click on a row or column added a line or column and the new, it would automatically have the same borders that has been clicked on the option.

  In this new version, option-click adds the row or column, but it is not about the attributes of the edge of the line or the previous column.

  Is it possible to do without having to go into the cell style attributes and assign borders for each?

  Any rejection of Pages v5 (including 5.6.2) is based on the Pages ' 09 v4.3. They are quite different applications and v5 lacks about 100 features that did not exist in the Pages ' 09. Even the architecture of document is not backward compatible. Your upgrade to the last Pages is a downgrade in functionality, and Pages ' 09 likely lies in Applications: iWork ' 09 file. Use and treat yourself to a true upgrade.

  That said, I've selected a line in a new table of Pages v5. Changed the border line and color to 2 pt and blue respectively. Then I option-click on this line several times, and the added lines were identical on the border style has changed from the original line. I can't reproduce your problem described here.

  Tested with Pages v5.6.2 on OS X 10.11.6.

• Added new line at the top of tabular form in APEX 5.0 and universal theme (topic 42)

  Hello Apex Experts,

  When the user clicks on the button 'Add Row' a tabular presentation, I would like the new line to be at the top of the report rather than the bottom.

  
  

  I followed the instructions from Added new line at the top of table in APEX 4.0 form and Denes Kubicek demo application. But it does nothing, always create new bottom line.

  
  

  Anyone have an idea or an idea?

  
  

  Your help would be appreciated.

  
  

  Kind regards

  Blabla
  

  Hi all

  This problem is now solved by following the new blogpost of Dene:

  http://www.deneskubicek.blogspot.de/2015/05/tabular-form-add-rows-top-universal.html

  Kind regards

  Blabla

• Calc problem with fact table measure used in the bridge table model

  Hi all
  
  I have problems with the calculation of a measure of table done since I used it as part of a calculation in a bridge table relation.
  
  A table of facts, PROJECT_FACT, I had a column (PROJECT_COST) whose default aggregate is SUM. Whenever PROJECT_COST was used with any dimension, the appropriate aggregation was made at appropriate levels. But, no more. One of the relationships that project_fact is a dimension, called PROJECT.
  
  PROJECT_FACT contains details of employees, and every day they worked on a project. So for one day, employee, Joe, could have a PROJECT_COST $ 80 to 123 project, the next day, Joe might have $40 PROJECT_COST for the same project.
  
  Dimension table, PROJECT, contains details of the project.
  
  A new feature has been added to the software - several customers can now be charged to a PROJECT, where as before, that a single client has been charged.
  This fresh percentage collapse is in a new table - PROJECT_BRIDGE. PROJECT_BRIDGE has the project, CUSTOMER_ID, will BILL_PCT. BILL_PCT always add up to 1.
  
  Thus, the bridge table might look like...
  CUSTOMER_ID BILL_PCT PROJECT
  123 100.20
  123 200.30
  123 300.50
  456 400 1.00
  678 400 1.00
  
  Where to project 123, is a breakdown for multiple clients (. 20,.30.50.)
  
  Let's say in PROJECT_FACT, if you had to sum up all the PROJECT_COST for project = 123, you get $1000.
  
  
  Here are the steps I followed:
  
  -In the physical layer, PROJECT_FACT has a 1:M with PROJECT_BRIDGE and PROJECT_BRIDGE (a 1:M) PROJECT.
  PROJECT_FACT = > PROJECT_BRIDGE < = PROJECT
  
  -In the logical layer, PROJECT has a 1:M with PROJECT_FACT.
  PROJECT = > PROJECT_FACT
  
  -Logical fact table source is mapped to the bridge table, PROJECT_BRIDGE, so now he has several tables, it is mapped (PROJECT_FACT & PROJECT_BRIDGE). They are defined for an INTERNAL join.
  -J' created a measure of calculation, MULT_CUST_COST, using physical columns, which calculates the sum of the PROJECT_COST X the amount of the percentage in the bridge table. It looks like: $ (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT)
  -J' put MULT_CUST_COST in the presentation layer.
  
  We still want the old PROJECT_COST autour until it happened gradually, it is therefore in the presentation layer as well.
  
  
  Well, I had a request with only project, MULT_CUST_COST (the new calculation) and PROJECT_COST (the original). I expect:
  
  PROJECT_COST MULT_CUST_COST PROJECT
  123. $1000 $1000
  
  I'm getting this for MULT_CUST_COST, however, for PROJECT_COST, it's triple the value (perhaps because there are quantities of 3 percent?)...
  
  PROJECT_COST MULT_CUST_COST PROJECT
  123 $1000 (correct) $3000 (incorrect, it's been tripled)
  
  If I had to watch the SQL, you should:
  SELECT SUM (PROJECT_COST),
  SUM (PROJECT_FACT. PROJECT_COST * PROJECT_BRIDGE. BILL_PCT),
  PROJECT
  Of...
  PROJECT GROUP
  
  
  PROJECT_COST used to work properly at a table of bridge of modeling.
  Any ideas on what I got wrong?
  
  Thank you!

  Hello

  Phew, what a long question!

  If I understand correctly, I think the problem is with your old measure of cost, or rather that combines with you a new one in the same request. If you think about it, your request as explained above will bring back 3 rows from the database, that's why your old measure of cost is multiplied. I think that if you took it out of the query, your bridge table would work properly for the only new measure?

  I would consider the migration of your historical data in the bridge table model so that you have one type of query. For historical data, each would have a single row in the bridge with a 1.0 BILL_PCT.

  Good luck

  Paul
  http://total-bi.com

• Relations reapper after adding another table

  Hello

  I have a problem that after using the option to hide some of the stranger, they keys reapper after making a few changes on the diagram (addition of a new table). More specific: on the schema relationship, there are many references to the table T1, I don't want to not show them in the because there are too many lines and it is not necessary to indicate all the. But when I hide them (objects-> show/hide foreign keys) and add another table to the diagram, all relationships are back. Can this be prevented somehow? DM, Version 4.1.0.881

  Hello

  Thanks for reporting the problem. I logged a bug.

  Can this be prevented somehow?

  You can add new tables to the diagram using drag & drop from the browser - then only FKs associated that tables appear on the diagram.

  Philippe

• Look for patterns in a string and insert it into a new table

  I need to write a query that finds a number of location of employees that has been changed from old to new

  EMPLOYEE_DESC

  Description of the ID

  1 employee location was change from 877-287-8765 to 876-876-0976

  2 location of employee was passing of 877-287-8766 at 876-879-0976

  slot 3 is passed under NONE FOUND TO577-75-5951

  Once I get the identifier for the old and the new, I need to insert into the new table

  INSERT INTO TABLE_B

  (OLD_LOC_ID, NEW_LOC_ID)

  VALUES (OLD_LOC_ID, NEW_LOC_ID);

  TABLE_B

  ID OLD_LOC_ID NEW_LOC_ID

  1 287-877-8765 876-876-0976

  2 287-877-8766 879-876-0976

  3. NONE FOUND 577-75-5951

  The problem is that there is no fixed model for these records. I guess I have to insert the records that correspond to a fixed patten and snoop then through other manually. Is there a REGULAR expression feature that can help me grep values old and new location for the employee_desc number?

  Thank you

  Kevin

  Hello

  Kevin_K wrote:

  ...  The problem is that there is no fixed model for these records. I guess I have to insert the records that correspond to a fixed patten and snoop then through other manually. Is there a REGULAR expression feature that can help me grep values old and new location for the employee_desc number?

  Thank you

  Kevin

  Yes, you can do something like this:

  REGEXP_SUBSTR (description

  , ' ((NONE FOUND) |) (\d+-\d+-\d+)) * To * \d+-\d+-\d+'

  1

  1

  'i' - case-insensitive

  )

  It looks like for

  1. a "phone number" or the words "NOTHING FOUND", followed immediately by
  2. 0 or more spaces followed immediately by
  3. the word "TO", followed immediately
  4. 0 or more spaces followed immediately by
  5. a "phone number".

  where a "phone number" is defined as

  1. 1 or more digits, followed immediately
  2. a hyphen, immediately followed by
  3. 1 or more digits, followed immediately
  4. a hyphen, immediately followed by
  5. 1 or more digits
  6. You can also get the parts before and after 'TO' separately.

• Comparison of the two bays and by generating a new table. ???

  Hi guys

  can someone solve this problem. Please...

  I have two tables, a table of strings and other's selectedLayers array with the same source names(a,b,c) selected in the aftermath.

  Now I want to generate the new table by using the string in [mySelectedComps]. source.name.

  For example

  var callName = [' a b "," "];

  var mySelectedComps = app.project.activeItems.selectedLayers; (eg.i chose a, b, c of comps in afx)

  var newArray = [];

  
  

  If ([callName][] mySelectedComps. source.nameof ==) {}

  newArray.push ();

  }

  How iterate two tables at the same time or how to compare an element in an array Array1 with all elements of array2 until it returns true/false.and, then proceed to the next item in the table 1. ??

  I think that you just need nested loops, something like this (untested):

  for (var i = 0; i)< myselectedcomps.length;="">

  for (var j = 0; j)< callname.length;="">

  If (callName [j] is {mySelectedComps [i].source.name)}

  newArray.push (mySelectedComps [i]);

  break;

  }

  }

  }

  Dan