Problem AP1522 with WLC 4402

Similar Questions

• Cisco AIR-LAP1041N-E-K9 does not not with WLC 4402 version 7.0.116.0

  Hi all

  appreciate your support for a problem I started to deal with today. I have a Cisco WLC 4402 running the 7.0.116.0 version and it's great to work with 25 Cisco 1252 access points. We received a new 20 Cisco 1041N APs today and I installed one in our site, but it does not work. He well worked and loaded the flash image and obtained WLC ip through DHCP option address and began to show the below error:

  * 00:00:10.021 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS self-test passed

  * 00:00:10.033 Mar 1: * CRASH_LOG = YES

  * 00:00:10.333 Mar 1: 1 Port is not presentSecurity base.

  MAC Ethernet address of base: C8:9 C: 1 D: 53:57:5E

  * 00:00:11.373 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on Dot11Radio interface 0

  * 00:00:11.465 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized AP event log (contains, 1088 messages)

  * 00:00:11.494 Mar 1: State of the voice_diag_test of WLC is false

  * 00:00:12.526 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed State to

  * 00:00:13.594 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to

  * 00:00:13.647 Mar 1: % SYS-5-RESTART: System restarted.

  Cisco IOS software, software C1040 (C1140-K9W8-M), Version 12.4 (23 c) JA2, VERSION of the SOFTWARE (fc3)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2011 by Cisco Systems, Inc.

  Updated Thursday, April 13, 11 12:50 by prod_rel_team

  * 00:00:13.647 Mar 1: % SNMP-5-start COLD: SNMP agent on host APc89c.1d53.575e knows a cold start

  * 00:08:59.062 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 1 Mar 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio

  * 00:08:59.138 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

  * 00:08:59.837 Mar 1: % SSH-5-ACTIVATED: SSH 2.0 has been activated

  * 00:09:00.145 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

  * 00:09:09.136 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e

  * 00:09:17.912 Mar 1: % PARSER-4-BADCFG: unexpected end of the configuration file.

  * 00:09:17.912 Mar 1: State of the voice_diag_test of WLC is false

  * 00:09:17.984 Mar 1: message logging LWAPP to 255.255.255.255.

  * 00:09:19.865 Mar 1: % CDP_PD-4-POWER_OK: full power - supply NEGOTIATED online

  * 00:09:19.886 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

  * 00:09:20.873 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

  * 00:09:20.874 Mar 1: % SYS-6-LOGGINGHOST_STARTSTOP: logging to host started 255.255.255.255 - initiated CLI

  Translate "CISCO-CAPWAP - CONTROLLER.atheertele.com"... the domain server (172.16.40.240)

  * 00:09:29.029 Mar 1: % CAPWAP-5-DHCP_OPTION_43: the 172.16.100.102 drive address obtained by DHCP

  * 08:27:02.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:02.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:03.175 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:03.177 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:03.177 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:03.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:03.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:03.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:03.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio

  * 25 May 08:27:03.448: State of the voice_diag_test of WLC is false

  * 08:27:14.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:14.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:15.185 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:15.186 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:15.186 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:15.330 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:15.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:15.334: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:15.334 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio

  * 25 May 08:27:15.450: State of the voice_diag_test of WLC is false

  * 08:27:26.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:26.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:27.182 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:27.183 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:27.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:27.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:27.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:27.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:27.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio

  * 08:27:27.433 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

  * 08:27:27.446 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.

  * 25 May 08:27:27.447: State of the voice_diag_test of WLC is false

  * 08:27:27.448 may 25: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

  * 08:27:27.456 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

  * 08:27:38.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:38.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:39.183 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:39.184 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:39.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:39.326 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:39.329 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:39.329: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:39.330 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio

  * 25 May 08:27:39.446: State of the voice_diag_test of WLC is false

  * 08:27:49.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:49.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:50.179 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:50.180 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:50.180 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:50.323 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:50.326 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:50.326: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:50.326 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio

  * 08:27:50.425 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

  * 08:27:50.438 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.

  I searched the difference in regulatory areas between AIR-LAP1041N -E- K9 and AIR-LAP1041N -A- K9 and no difference was found which may affect the operation of this access point.
  to cite our WLC configuration for regulatory areas is:
  Country set AR codes

   

  Area of regulation 802. 11A:-A

  802.11bg:-a

  My question is should I just include my country in the WLC (IQ) add the field of requlatry (-E) to solve this problem? or change the country will affect the operation of all APs workers?

  Appreciate your kind support,

  Patrick Q.

  Try adding a European country to your regulatory domain.

• Cannot save with WLC 4402 LAP

  Hi all

  I have cisco WLC (AIR-WLC4402-12-K9) with two LAP (AIR-LAP1131AG-A-K9) connected to move and one of the TOUR is able to register with WLC while the other was autonomous AP which has been converted to KNEES who fails to register with WLC. I see that the AP is able to enter the Ip address and even joined the WLC but fails to register. Please help us solve this problem. I have attached all papers relevant to this case. Waiting for your answer.

  FYI I aimed below URL, but could not able to figureout the reason.

  http://www.Cisco.com/en/us/products/ps6366/products_tech_note09186a00808f8599.shtml

  I don't understand.  You have TWO 2 1131AG.  We joined for the last two days and another recently joined.  Say the other keeps "bouncing"?

  Have you checked if the WAP is declining because of the power?

• AIR-LAP1142N will remain not associated with WLC 4402

  We put six new AIR-LAP1142N on network access points.  We have other models of access points in line, and they are very well 4402 log shows that the 1142 s are constantly associate and disassociate. I can see their mac addresses in the list of wireless access. Sometimes I can even see their details. The product ID and the serial number is not.  They have an IP address.

  I've updated the controller to 4.2.209.0 software, but it made no difference. What is the problem here?

  Oh, it's average... 1142 s ONLY works with 5.2 code or ONLY most recent...

  Please rate the post if this was helpful... Thank you

• problem with the guest in WLC 4402 account

  I created a single guest in WLC 4402 version 4.2 account and distribute to every visitor that comes in our society. However, when we receive a lot of visitors, the WLC end authenticate. Anyone know if there is a limit using a guest account?

  Properly refuse authentication? Or the page of connection stop appearing or something?

  There was a bug with the webauth die under a heavy load, regardless of the number of accounts used the same.

  A good way for you to check, if problem, would be to create a second user backup comments and see if that has started to work. If not, the account is not the problem.

  I'm not aware of any use of the same account maximum.

  4.2 what exactly are you running?

• WLC 4402 impossible to authenticate correctly with ACS 5.2

  For some reason, I can't WLC to authenticate correctly with ACS 5.2. It's very strange in the sense that when I checked the log. ACS authenticates and authorizes the WLC 4402, but I can't log on the WLC. login screen appears, if I typed the username that he jumped

  Controller of >

  user:

  password:

  No matter what I typed (internal or external users), nothing seems to work.

  It comes to my frustration, I have no problem with authentication of routers and switches except WLC 4402.

  Hello

  Please delete privilege on the ACS level settings.

  Elements of strategy > authorization and permissions > peripheral Administration > Shell profiles > common tasks

  By default the privilege - do not use.

  Maximum privilege - not in use

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages

• HOWTO to Setup wpa2 + aes + psk with mac-filter WLC 4402 (RADIUS)

  Hello

  I'm trying to Setup wpa2 + aes + psk with mac-filter (RADIUS) on WLC 4402 (6.0.182), with Lap - 1142

  on security, the value L2 security wpa + wpa2 and make sure MAC filtering

  Uncheck the WPA

  check the WPA2, AES, TKIP to unckeck

  Mgmt PSK auth key

  PSK ASCII marker

  L3 no

  Uncheck the political web

  AAA servers

  Select enable accounting radius server server

  It's work fine, when I use WEP with mac-filter (radius)

  but when I select WPA2 is it fail and no newspaper both WLC server and RADIUS

  Is this limitation or bug...

  Thanks in advance for your help

  This sounds like it should work.  Maybe your client likes not wpa2/aes or does not match the PSK.  I would try to associate with this same configuration, but without enabled mac filtering to try to identify the problem.

  -John

• Windows XP Home Edition on WLC 4402

  Hello

  I have a WLC 4402 Wireless LAN Controller with several 1231 AP on LWAPP. WLAN security setting a WPA + WPA2 with PSK share key. All computers in the domain are fine, wireless connections are stable. I have a group of students use Netbook under Windows XP Home SP3 got connection and drop situation. On XP event IDS has continuous case 4201 and 4202 and journal WLC I also continuous newspaper in the form

  * Apr 19 10:35:44.046: % DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:407 Max EAPOL - Key M1 broadcasts exceeded for client 00:26:5e:eb:fd:0 has

  I understand that XP Home has no certificate of domain environment so I didn't install any server AAA service. How can this problem be solved? Keep trying on the combination of security, but no luck. Help, please. Thank you.

  Attachment is WLC configuration file without encryption.

  Bill,

  Is it chance ASUS EeePC Netbook 1005 HA?

  If so, check the drivers.

• About WLC 4402 LDAP client authentication

  Hello

  I'm install a WLC 4402, the client wants to authenticate users with the LDAP and what he expected to use current users in AD, however

  I just read some documents as reference 'Local EAP authentication server on the Wireless LAN Controller with EAPFAST and LDAP
  Configuration example"and «Web authentication via LDAP on LAN Protocol wireless controllers (WLCs) example Configuration»

  Require both the then to define a new OU and define a new user and select anonymous feature of Bind.

  My question is, should I add all current on AD users on the new ORGANIZATIONAL unit in order to be authenticated as a wireless client?

  I hope that someone of you can clear my doubt

  Kind regards

  Note that LDAP with AD requires no methods EAP-mschapv2. If you can't do PEAP-mschapv2 with AD as LDAP backend. EAP-FAST EAP-FAST (GTC) and no EAP-FAST (mschapv2). It is a limitation due to the way in which AD works in LDAP mode.

  The anonymous bind is not required at all, that it is to be like this in the example. Usually, anonymous bind is not allowed by default on the current version of windows server.

  You are not forced to push all the users in an OU. Simply give a search base DN to the WLC where the WLC can reach all customers on AD. If all your users organizational units are at the root of your domain, you will need to give "DC = domain, DC = com" as base DN and it means that each search will arrive on your entire ad, which isn't super effective. That's all.

  Nicolas

• ACS RADIUS timeout with WLC 7.0 5.0

  Hi guys,.

  I'm setting up a device Cisco Secure ACS 1120 running 5.0.0.21 ACS to manage the RADIUS of a Cisco WLC 5508 device query running the 7.0.116.0 version.

  • These devices have open communication on all ports - no firewall or ACL
  • they have successful ping communication

  The following statements illustrate some but not all debugging I did to make sure that each device works properly in isolation.

  • Using the simple windows (radserv2.exe) instead of the Cisco ACS RADIUS server
    • This works and the WLC gets answer my fortune Server RADIUS
  • Using a simple windows EAP client to query the ACS using the RADIUS protocol
    • This works and the FAC processes the RADIUS request and sends a response
  • Placed a customer wireshark on the network to inspect the time-out.
    • Wireshark saves the package to the WLC for GBA using port 1812 but does not see responses to GBA package

  At the moment I have the

  1. WLC accepting wireless client association and
  2. sending the query RADIUS (EAP - TLS, PEAP and EAP-FAST) for GBA,
  3. the WLC receives no answer and generates a timeout message and separates the client.
     1. Note this is not a rejection or a similar message, the simple ACS does not even the package. i.e. There is absolutely nothing in the logs of ACS to suggest that he had even received a package of radius of the WLC.

  In summary the WLC and GBA properly operate independently, but they do not communicate via radius.

  Any help appreciated thanks

  It seems that you use ACS 5.0 without tasks.

  For your information, the version of the product is now up to 5.2 and 5.3 ACS should soon be released

  I recall there was a problem with ACS 5.0 with WLC operations that has been resolved in patch for 5.0

  I'm not sure of the specific CDETS but can be:

  CSCsy17858 Any manipulation of Tunnel-Type & Tunnel-Client-Endpoint uploading incorrect

  ACS 5.0 has a rollup with all the patches being accumulated approach

  My recommendation would be to download the patch 8 for ACS 5.0: 5.0.0.21.8

  Patch can be downloaded from CEC

  To install a patch set a repository on ACS (cumulative patches are larger than 32 MB, you can not use TFTP to it), copy the patch file in the repository, click ACS CLI:

  # acs patch installs repository

• How to add additional capacity for WLC-4402-12-K9-V02

  Hello

  End-user has a WLC-4402-12-K9-V02 with 8 towers is currently working, in short time will need to add more towers that will be more than 12.

  How we can increase capacity to support 25 laps.

  concerning

  Hello

  The WLC we currently supports maximum 12 APs, if you want to support more then to buy a WLC that supports several APs...

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps6302/ps8322/ps6307/product_data_sheet0900aecd802570b0_ps6366_Products_Data_Sheet.html

  Let me know if this answers your question!

  Concerning

  Surendra

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• Problem starting with Satellite A210-183

  Hi to you all.

  My name is Costis and I have a starting problem with my laptop. The laptop runs Vista and it was bought in November 2007.

  I have the following message:

  "Windows has encountered a problem communicating with a device attached to the computer.
  This error can be caused by unplugging a removable storage device, such as a hard drive or a cd-rom drive which is a failure.
  Make sure that all removable storage is properly connected, and then restart your computer.
  Status: 0x00000e9
  Info: An unexpected i/o error has occurred. "

  Can you help me how to do?

  Thanks in advance,
  COSTIS

  Hello

  What devices are connected to the machine? Some external HDD´s or DVD readers? Would be interesting to know because this error is caused mainly by external media/devices that are not properly connected to the laptop or a malfunction.

  I recommend to unplug everything from your machine and check if the error reappears. So I would suggest to backup all of your important data and retrieve the machine completely (maybe it s a related problem of the software).

  If that's not enough then come back and talk to us more this question.

  Welcome them

• HP Pavilion Notebook-15-p108tx: problem connecting with specific programs

  Hi, I had problems connecting with specific programs recently. I'm still able to communicate online through web browsers. Mozilla Firefox works fine, but Google Chrome still has some problems loading of specific pages or they don't load at all. The main programs I am having difficulties with are mainly games platform programs like Steam, Battle.net, and League of Legends, and I'm unable to go online or to connect to their servers.

  I never had no problem connecting like these last two years that I've owned my laptop, until recently. I think it was the 6th or 7th of may these problems started.

  I updated my drivers and was constantly check to download the most recent. I don't know if it's my internet provider, but I was also constantly check the State of the network to ensure that the services are very good.

  If anyone else has this problem and if there are any suggestions that you think could help solve this problem, it would be appreciated.

  Thank you

  Jasper

  Hi Jasper,.

  Thank you for the update. I think that your computer have a rootkit infection. Most of them were inside of the Chrome Extensions.

  Here's what you need to do.

  Open chrome

  Click on the Menu bar in the upper right

  Click more tools

  Click Extensions

  Please search for suspicious extensions that does not belong to the computer, especially ads. Once you identified, simply click the trash can icon then Chrome close then reopen it again to see if you can connect to your desired game. If this isn't the case, then proceed as follows.

  Manual removal of suspicious files (if you are uncomfortable with it. If this is not the case, then run System Restore from safe mode with command prompt)

  Manual removal (I miss the old days of MS virus removal )

  Go to RUN type %temp% , and then delete all folders by pressing SHIFT + DELETE

  Go to Control Panel and then locate all the apps that you think a form of ads

  Go to safe mode with network. Run Malwarebytes in that State

  Then run Tweaking tool to fix everything that has changed since your computer

  http://www.Tweaking.com/files/setups/Tweaking.com_windows_repair_aio_setup.exe

  If your not comfortable with the troubleshooting steps may perform the system restore on the day, it was working fine.

• Many people have a problem closing with El Capitan? Apple plan to fix this?

  Many people have a problem closing with El Capitan? Apple plan to fix this?

  You must describe your shutdown problem otherwise, we can only guess what you're talking about.