Cannot save with WLC 4402 LAP

Similar Questions

• Cisco AIR-LAP1041N-E-K9 does not not with WLC 4402 version 7.0.116.0

  Hi all

  appreciate your support for a problem I started to deal with today. I have a Cisco WLC 4402 running the 7.0.116.0 version and it's great to work with 25 Cisco 1252 access points. We received a new 20 Cisco 1041N APs today and I installed one in our site, but it does not work. He well worked and loaded the flash image and obtained WLC ip through DHCP option address and began to show the below error:

  * 00:00:10.021 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS self-test passed

  * 00:00:10.033 Mar 1: * CRASH_LOG = YES

  * 00:00:10.333 Mar 1: 1 Port is not presentSecurity base.

  MAC Ethernet address of base: C8:9 C: 1 D: 53:57:5E

  * 00:00:11.373 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS self-test passed on Dot11Radio interface 0

  * 00:00:11.465 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized AP event log (contains, 1088 messages)

  * 00:00:11.494 Mar 1: State of the voice_diag_test of WLC is false

  * 00:00:12.526 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed State to

  * 00:00:13.594 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to

  * 00:00:13.647 Mar 1: % SYS-5-RESTART: System restarted.

  Cisco IOS software, software C1040 (C1140-K9W8-M), Version 12.4 (23 c) JA2, VERSION of the SOFTWARE (fc3)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2011 by Cisco Systems, Inc.

  Updated Thursday, April 13, 11 12:50 by prod_rel_team

  * 00:00:13.647 Mar 1: % SNMP-5-start COLD: SNMP agent on host APc89c.1d53.575e knows a cold start

  * 00:08:59.062 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 1 Mar 00:08:59.062: bsnInitRcbSlot: slot 1 has NO radio

  * 00:08:59.138 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

  * 00:08:59.837 Mar 1: % SSH-5-ACTIVATED: SSH 2.0 has been activated

  * 00:09:00.145 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs

  * 00:09:09.136 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 172.16.26.81, mask 255.255.255.0, hostname APc89c.1d53.575e

  * 00:09:17.912 Mar 1: % PARSER-4-BADCFG: unexpected end of the configuration file.

  * 00:09:17.912 Mar 1: State of the voice_diag_test of WLC is false

  * 00:09:17.984 Mar 1: message logging LWAPP to 255.255.255.255.

  * 00:09:19.865 Mar 1: % CDP_PD-4-POWER_OK: full power - supply NEGOTIATED online

  * 00:09:19.886 Mar 1: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

  * 00:09:20.873 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to

  * 00:09:20.874 Mar 1: % SYS-6-LOGGINGHOST_STARTSTOP: logging to host started 255.255.255.255 - initiated CLI

  Translate "CISCO-CAPWAP - CONTROLLER.atheertele.com"... the domain server (172.16.40.240)

  * 00:09:29.029 Mar 1: % CAPWAP-5-DHCP_OPTION_43: the 172.16.100.102 drive address obtained by DHCP

  * 08:27:02.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:02.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:03.175 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:03.177 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:03.177 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:03.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:03.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:03.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:03.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:03.378 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:03.378: bsnInitRcbSlot: slot 1 has NO radio

  * 25 May 08:27:03.448: State of the voice_diag_test of WLC is false

  * 08:27:14.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:14.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:15.185 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:15.186 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:15.186 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:15.330 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:15.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:15.334: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:15.334 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:15.379 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:15.379: bsnInitRcbSlot: slot 1 has NO radio

  * 25 May 08:27:15.450: State of the voice_diag_test of WLC is false

  * 08:27:26.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:26.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:27.182 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:27.183 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:27.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:27.329 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:27.333 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:27.333: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:27.333 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:27.377 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:27.377: bsnInitRcbSlot: slot 1 has NO radio

  * 08:27:27.433 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

  * 08:27:27.446 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.

  * 25 May 08:27:27.447: State of the voice_diag_test of WLC is false

  * 08:27:27.448 may 25: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

  * 08:27:27.456 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

  * 08:27:38.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:38.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:39.183 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:39.184 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:39.184 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:39.326 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:39.329 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:39.329: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:39.330 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:39.375 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:39.375: bsnInitRcbSlot: slot 1 has NO radio

  * 25 May 08:27:39.446: State of the voice_diag_test of WLC is false

  * 08:27:49.000 may 25: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:49.001 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 08:27:50.179 may 25: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.16.100.101 peer_port: 5246

  * 08:27:50.180 may 25: % CAPWAP-5-SENDJOIN: send request to join 172.16.100.101

  * 08:27:50.180 may 25: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 08:27:50.323 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 08:27:50.326 may 25: % DTLS-5-ALERT: WARNING received: close notify alert from 172.16.100.101

  * 25 May 08:27:50.326: % PEER_DISCONNECT-5-DTLS: Peer 172.16.100.101 has closed the connection.

  * 08:27:50.326 may 25: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.16.100.101:5246

  * 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 08:27:50.370 may 25: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 25 May 08:27:50.370: bsnInitRcbSlot: slot 1 has NO radio

  * 08:27:50.425 may 25: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

  * 08:27:50.438 may 25: % PARSER-4-BADCFG: unexpected end of the configuration file.

  I searched the difference in regulatory areas between AIR-LAP1041N -E- K9 and AIR-LAP1041N -A- K9 and no difference was found which may affect the operation of this access point.
  to cite our WLC configuration for regulatory areas is:
  Country set AR codes

   

  Area of regulation 802. 11A:-A

  802.11bg:-a

  My question is should I just include my country in the WLC (IQ) add the field of requlatry (-E) to solve this problem? or change the country will affect the operation of all APs workers?

  Appreciate your kind support,

  Patrick Q.

  Try adding a European country to your regulatory domain.

• Problem AP1522 with WLC 4402

  Hello

  I have a problem installing a 1522 AP to the WLC 4402, it is not recognized, what can be? Check all connections and all is well

  thank me for help

  For MESH AP, you need to add the mac address of the MAC filter on the Security tab.  To RAP, you can use the mac ethernet, a map layer, you must use the mac of 5 GHz radio

• Cannot save with Toshiba DVR D-R410KU

  Gradually my VCR - bought a DVR - model Toshiba - D-R410KU. I can't get this thing to save for my life. I can get it to play DVDs fine. When I try to save I do not see the TV screen either - it's just a blue screen. Should not be something like with a VCR that's TV/VCR or SOMETHING? I've already put the L1/L2 - so I don't think it's that. I use RCA cables and have cable TV. Any suggestions? I am really new to this not sure what info should I introduce someone to help me - so if you have any questions and need to detail more let me know. I would be really nice to keep this thing - I hate online orders to return the items! One thing about this DVR - it is not easy to make the least of the world!

  Please visit http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=37597

• Cannot save with BBM on DevAlpha

  I'm doing my BBM THAT connected application, but I can still save my application with BBM. I use PhoneGap/Cordova and the theme of BB10 jQueryMobile in my application. I have also linked WebWorks for my application and can create calendar with events.

  I added

  and

  
    bbm_connect
  
  

  to my file config.xml.

  The demo https://github.com/blackberry/BB10-WebWorks-Samples/tree/master/bbm BBM works very well on my device and I use BBM to discuss with others.

  This is the error I get when trying to save my application:

  TypeError: 'undefined' is not a function (assessment '('onaccesschanged', accessChangedCallback) blackberry.event.addEventListner')

  I tried to make my BBM related with the 1.0.2.x SDK app but it also did not work (I don't have an error, it just did nothing).

  And this is my current code (for the most recent help (1.0.3.8) SDK):

  $('[data-role="action"]').bind("vclick", function () {
      if (this.id == "recommendTourViaBBM") {
          // Create callback invoked when access changes
          blackberry.event.addEventListner('onaccesschanged', accessChangedCallback);
      }
  });
  
  function accessChangedCallback(accessible, status) {
      if (status == "unregistered") {
          // App is unregistered, proceed to register
          registerApp();
      } else if (status == "allowed") {
          console.log("allowed");
          // Access allowed
      }
      // Listen for other status...
  };
  
  function registerApp() {
  // Register with the platform
      console.log("trying to register");
      blackberry.bbm.platform.register({
          uuid: "**********" // Randomly generated UUID, http://www.guidgenerator.com/online-guid-generator.aspx
      });
  }
  

  Gerii wrote:

  I'm doing my BBM THAT connected application, but I can still save my application with BBM. I use PhoneGap/Cordova and the theme of BB10 jQueryMobile in my application. I have also linked WebWorks for my application and can create calendar with events.

  I added

  and

  
    bbm_connect
  
  

  to my file config.xml.

  The demo https://github.com/blackberry/BB10-WebWorks-Samples/tree/master/bbm BBM works very well on my device and I use BBM to discuss with others.

  This is the error I get when trying to save my application:

  TypeError: 'undefined' is not a function (assessment '('onaccesschanged', accessChangedCallback) blackberry.event.addEventListner')

  I tried to make my BBM related with the 1.0.2.x SDK app but it also did not work (I don't have an error, it just did nothing).

  And this is my current code (for the most recent help (1.0.3.8) SDK):

  $('[data-role="action"]').bind("vclick", function () {
      if (this.id == "recommendTourViaBBM") {
          // Create callback invoked when access changes
          blackberry.event.addEventListner('onaccesschanged', accessChangedCallback);
      }
  });
  
  function accessChangedCallback(accessible, status) {
      if (status == "unregistered") {
          // App is unregistered, proceed to register
          registerApp();
      } else if (status == "allowed") {
          console.log("allowed");
          // Access allowed
      }
      // Listen for other status...
  };
  
  function registerApp() {
  // Register with the platform
      console.log("trying to register");
      blackberry.bbm.platform.register({
          uuid: "**********" // Randomly generated UUID, http://www.guidgenerator.com/online-guid-generator.aspx
      });
  }
  

  Assuming that it is a direct copy of your code, I see a typo in that could be the cause of error.  You 'blackberry.event.addEventListner' when it should be "blackberry.event.addEventListener" - missing an 'e' in the listening port.

• AIR-LAP1142N will remain not associated with WLC 4402

  We put six new AIR-LAP1142N on network access points.  We have other models of access points in line, and they are very well 4402 log shows that the 1142 s are constantly associate and disassociate. I can see their mac addresses in the list of wireless access. Sometimes I can even see their details. The product ID and the serial number is not.  They have an IP address.

  I've updated the controller to 4.2.209.0 software, but it made no difference. What is the problem here?

  Oh, it's average... 1142 s ONLY works with 5.2 code or ONLY most recent...

  Please rate the post if this was helpful... Thank you

• Cannot save with transparent background

  Hello. I use a very old version, Illustrator 10. I'm only to learn how to use the program and I can not save an image with a transparent background. I tried to use 'Save for Web' and check the 'Transparency' (.gif and .png). The gray and white checkerboard displayed, as if the background is transparent. However, when I opened the image, he had a white background. It wasn't the complete work plan, just the bounding box. Am I missing something?

  Without actually seeing your picture, it's just conjecture (real, not just the dummy). Makes no sense and is no fun.

  Vector images is not normally a background. So why not save any vector format Quark will accept? A PDF, for example.

• Cannot save with an online casino, he always tells me that some fields are required, but I filled it

  I am trying to sign up with an online casino, but when I completed the form, and there are green checkmarks to confirm that all the information is valid, a box keeps popping up telling me "some fields are required. I tried to re start, firewall lowered

  Hi genevahl,

  Please use the forum for Support of Vista,

  Unfortunately, we can not help you in this case because it seems that it is a design flaw in the Web site itself.  It is outside the scope of our support forum.  You should contact the administrator Web site directly for support.

  Thanks again,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot save with eFax on printer eStation C510a

  When I try to record with eFax on my eStation C510a printer, I get the message "unable to get a fax number.  HP support has not been able to find a solution to this problem.

  Does anyone else have this problem?  What is the solution?

  12-29-2010 09:10

  I just tried to sign up with eFax again and it worked!  He gave me a FAX number and my email address has sent a confirmation e-mail.

  I had thought that it me limited to 20 entrants and 20 outgoing faxes each month.  It turns out that these are 20 PAGES incoming AND outgoing of 20 PAGES each month.

• MX200 (TC6.2) cannot save with SIP TLS for control of VCS

  Hi all

  I just got a brand-new MX200 in our laboratories.

  We will evaluate at the moment the overall upgrade to the version sw TC6.2.

  The MX200 was delivered with TC6.1.1.7. Check in the control of VCS with SIP TLS works without any problem at all.

  VCS - C eventlog:

  "26 aout 14:16: 47 tvcs: event ="Accepted for registration"Service ="SIP"Src - ip ="172.18.93.88"Src-port ="5061"Protocol ="TLS"AOR ="[email protected] / * /"Contact =" sip:[email protected]/ * /: 5061; transport\ = tls"duration ="60"Level = '1' elements UTCTime = '2013-08-26 14:16:47, 833'

  "26 aout 14:16: 47 tvcs: event ="The requested record"Service ="SIP"Src - ip ="172.18.93.88"Src-port ="5061"Protocol ="TLS"AOR ="[email protected] / * /"Contact =" sip:[email protected]/ * /: 5061; transport\ = tls"duration ="60"Level = '1' elements UTCTime = '2013-08-26 14:16:47, 831'

  After registration TC6.2 update fails.

  The 26 aout 14:36: 26 tvcs: event = "Rejected registration" reason = "Received no authenticated source" Service = "SIP" Src - ip = "172.18.93.88" Src-port = "36545" Protocol = "TLS" AOR = "sip:DOMAIN.com" Contact ="<>[email protected]"/ * /: 5061;transport\=tls>;+sip.instance\= '"" duration = '3600' level = '1' elements UTCTime = "2013-08-26 14:36:26, 481"

  26 aout 14:36: 26 tvcs: event = "The requested record" Service = "SIP" Src - ip = "172.18.93.88" Src-port = "36545" Protocol = "TLS" AOR = "sip:DOMAIN.com" Contact ="<>[email protected]"/ * /: 5061;transport\=tls>;+sip.instance\= '"" duration = '3600' level = '1' elements UTCTime = "2013-08-26 14:36:26, 481"

  As far as I can see there's something doesn't quite work with the protocoll in relationship with the SIP URI (AOR). Miss me the prefix "[email protected] / * /"

  All other systems (profile, ex, sx) work properly with TC6.2.

  Anyone have an idea?

  Hi adil,.

  Since the inscription "AOR" is only said AOR = "sip:DOMAIN.com"

  I belive you must have some sort of rule research on the VCS the sip domain and pointing to the crossing or a nearby area and the policy setting must be "audit powers.

  and since there is no name of user and password available the record attempts will fail with the message "from source" unauthenticated

  did you recently create transformations on the VCS? also, check your configuration of endpoint.

  You can create a rule to send this registration through local area message passing in turn to the subzone to registration. Please note the subfield must be set on "treat as authenticated" If you do not use authentication.

  Rgds

  Alok

• HOWTO to Setup wpa2 + aes + psk with mac-filter WLC 4402 (RADIUS)

  Hello

  I'm trying to Setup wpa2 + aes + psk with mac-filter (RADIUS) on WLC 4402 (6.0.182), with Lap - 1142

  on security, the value L2 security wpa + wpa2 and make sure MAC filtering

  Uncheck the WPA

  check the WPA2, AES, TKIP to unckeck

  Mgmt PSK auth key

  PSK ASCII marker

  L3 no

  Uncheck the political web

  AAA servers

  Select enable accounting radius server server

  It's work fine, when I use WEP with mac-filter (radius)

  but when I select WPA2 is it fail and no newspaper both WLC server and RADIUS

  Is this limitation or bug...

  Thanks in advance for your help

  This sounds like it should work.  Maybe your client likes not wpa2/aes or does not match the PSK.  I would try to associate with this same configuration, but without enabled mac filtering to try to identify the problem.

  -John

• How to do this: Photoviewer, Windows cannot save changes to the image due to a problem with the properties of the file!

  Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• WLC 4402 impossible to authenticate correctly with ACS 5.2

  For some reason, I can't WLC to authenticate correctly with ACS 5.2. It's very strange in the sense that when I checked the log. ACS authenticates and authorizes the WLC 4402, but I can't log on the WLC. login screen appears, if I typed the username that he jumped

  Controller of >

  user:

  password:

  No matter what I typed (internal or external users), nothing seems to work.

  It comes to my frustration, I have no problem with authentication of routers and switches except WLC 4402.

  Hello

  Please delete privilege on the ACS level settings.

  Elements of strategy > authorization and permissions > peripheral Administration > Shell profiles > common tasks

  By default the privilege - do not use.

  Maximum privilege - not in use

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages

• problem with the guest in WLC 4402 account

  I created a single guest in WLC 4402 version 4.2 account and distribute to every visitor that comes in our society. However, when we receive a lot of visitors, the WLC end authenticate. Anyone know if there is a limit using a guest account?

  Properly refuse authentication? Or the page of connection stop appearing or something?

  There was a bug with the webauth die under a heavy load, regardless of the number of accounts used the same.

  A good way for you to check, if problem, would be to create a second user backup comments and see if that has started to work. If not, the account is not the problem.

  I'm not aware of any use of the same account maximum.

  4.2 what exactly are you running?

• Problem with the 2007 Hallmark card studio deluxe installation and get error message "Error 1904.Module that cannot save c:\windows\syswow64\msxml4dll".

  Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff

  I want to install hallmark card studio deluxe 2007 and I got this message

  C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.

  Someone knows how to fix this?

  Thank you

  Hi Roman,.

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. deal with any issue when installing any other program?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest to perform the clean boot and see if you can install the software.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  Method 3:
  If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.
  Follow the steps to clear the temp folder:

  a. click the Start button and in the search in %temp% bar and press ENTER.

  b. the Temp folder opens, press on Ctrl + A , and then press delete.

  Note: I suggest that you backup important file or a folder in the Temp folder.

  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.