Problem application Archives newspapers
HelloWe are working on RHEL 5.7 DB Version 11.2.0.3
We do a test in order to restore a database from a different server backup
All goes well until restore us the database, when we try to "RECOVER DATABASE;" we'll always have a media failure because rman is waiting for a newspaper archive more than those we have:
RMAN> recover database;
Starting recover at 11-MAY-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=513 device type=DISK
starting media recovery
archived log for thread 1 with sequence 70149 is already on disk as file /backup/oracle/fast_recovery_area/DB11/archivelog/2012_05_11/o1_mf_1_70149_7ttnrxnn_.arc
archived log file name=/backup/oracle/fast_recovery_area/DB11/archivelog/2012_05_11/o1_mf_1_70149_7ttnrxnn_.arc thread=1 sequence=70149
unable to find archived log
archived log thread=1 sequence=70150
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 05/11/2012 15:25:31
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 70150 and starting SCN of 5613624984
As you can see, journal archived with sequence 70150 being however should this file does not existCould someone explain to me why - this happenning? Please let me know if more information is needed
expected behavior
documentation:
«Oracle recovery makes incompatible consistent backups while reading all archived * and online redo logs *, beginning with the CPN first in one of the headers of data file and applying changes to the newspapers in the data files.»
As you can see, journal archived with sequence 70150 being however should this file does not exist
70150 sequence is not archived yet, its in the papers of restoration of the database where the backup was performed
New from the documentation:
"Full recovery implies the use of redo data or incremental backups, combined with a backup of a database, tablespace or data updated to the most recent file in time. It is called complete because Oracle applies all the changes roll forward contained in the archives * and newspapers online * for backup. "In general, you perform media complete recovery after a * media failure damages the data files or the fichier.* command.
When you perform a test restore/recovery on a test server, just do an incomplete recovery
now that 70149 sequence has been applied, open the database:
alter database open resetlogs;
and you're done
once more, his behavior expected
Tags: Database
Similar Questions
-
Archived newspapers and Flash recovery
Hello
in 10g R2, what is the relationship between archived newspapers and Flash recovery?
I have logs archived here:
P:\oracle\product\10.2.0\flash_recovery_area\MYDB\ARCHIVELOG\2008_11_02
And also here:
D:\base\MYDB\arch
Are both the Sami? What is the difference? We need both of them?
Here are my settings:
Thanks before.SQL> archive log list Database log mode Archive Mode Automatic archival Enabled Archive destination USE_DB_RECOVERY_FILE_DEST Oldest online log sequence 297 Next log sequence to archive 299 Current log sequence 299 SQL> show parameter log_archive_dest_1 NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ log_archive_dest_1 string LOCATION=D:\base\MYDB\arch OPTIONAL REOPEN=300 log_archive_dest_10 string LOCATION=USE_DB_RECOVERY_FILE_ DEST OPTIONAL REOPEN=300
Newspaper Archives are written in several places because of parameter settings. However, if you look at the value, OPTIONAL string indicates that the archiving of these places is not mandatory. If the archiver is unable to create an archive to any of these places, instance always works without any problem.
It is absolutely mandatory that the archiver must be able to create an archive in one of the locations (if there is not both).
What is the value to LOG_ARCHIVE_MIN_SUCCEED_DEST (default is 1)?
If you do not need two of them, you can stop archiving to a specific location with ALTER SYSTEM.
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams100.htm#I1010086
Published by: Sissi Kandi on November 2, 2008 21:38
-
Since the download of Firefox 4, I have problems of archiving gmail conversations since my Inbox view (one or more conversations) as it says 'No. Conversations selected' when I selected one or more. Also, when I go to enter a new event in google calendar, I have to click the cursor in the field type of the event (it used to let me just start typing) or else he bends and begins to jump to the day view or another month. Does anyone know how to fix one of these?
I had this problem; But while trying to solve another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset the preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences
-
Two copies of archive newspapers with one sense
Hello
On a 11g database, I got only defined flash_recovery_area. When set to log mode archive, planned only a copy of archive newspapers produced in the defined location of USE_DB_RECOVERY_FILE_DEST, but there is another copy so obtained in $ORACLE_HOME/dbs directory. How to explain this? and how to DISABLE the second copy to produce?
Thanks for any help
Li Zhuang
PS: more information
In spfile:
ORCL.__java_pool_size = 50331648
ORCL.__large_pool_size = 16777216
ORCL.__oracle_base='/usr/oracle11g'#ORACLE_BASE the value of the environment
ORCL.__pga_aggregate_target = 1828716544
ORCL.__sga_target = 1056964608
ORCL.__shared_io_pool_size = 0
ORCL.__shared_pool_size = 654311424
ORCL.__streams_pool_size = 0
*.audit_file_dest='/usr/Oracle11g/Admin/ORCL/adump '
* .audit_trail = "db".
* full = '11.1.0.0.0'
* .control_file_record_keep_time = 30
*.control_files='/DB/orcl1/control0^@^@C^AC"^@^@^@^@^@^C^@^@^@^@^@^@^A^D{^S^@^@1.ctl','/DB/orcl1/control02.CTL ',.
' / db/orcl1/control03.ctl'
* .db_block_size = 8192
* .db_domain = "
* .db_name = "orcl".
*.db_recovery_file_dest='/usr/Oracle11g/flash_recovery_area '
* .db_recovery_file_dest_size = 6442450944
* .diagnostic_dest = "/ usr/oracle11g."
*. Dispatchers ='(Protocol=TCP) (SERVICE = orclXDB)"
* .job_queue_processes = 5
* .open_cursors = 300
* .pga_aggregate_target = 1824522240
* runoff = 150
* .remote_login_passwordfile = "EXCLUSIVE."
* .sga_max_size = 1258291200 #internally adjusted
*. SGA_TARGET^@^@C^AC"^@^@^@^@^@^D^@^@^@^@^@^@^A^DCS^@^@=1056964608
* .undo_tablespace = "UNDOTBS1.
==============================
SQL > select destination from V$ ARCHIVE_DEST;
DESTINATION
--------------------------------------------------------------------------------
/ usr/Oracle11g/R1/DBS/Arch
USE_DB_RECOVERY_FILE_DEST
10 selected lines.
SQL > SQL > archive log lis
SP2-0718: illegal option ARCHIVE LOG
SQL > list of archive logs
Database log mode Archive Mode
Active AutoArchive
Destination of archive USE_DB_RECOVERY_FILE_DEST
Sequence of journal online oldest 2549
Log sequence archive 2551
Current log sequence 2551
SQL >
===================
SQL > show parameter Archives
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
ARCHIVE_LAG_TARGET integer 0
log_archive_config string
Log_archive_dest chain
Log_archive_dest_1 chain
LOG_ARCHIVE_DEST_10 string
LOG_ARCHIVE_DEST_2 string
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
allow the chain of log_archive_dest_state_1
allow the chain of log_archive_dest_state_10
allow the chain of LOG_ARCHIVE_DEST_STATE_2
allow the chain of log_archive_dest_state_3
allow the chain of log_archive_dest_state_4
allow the chain of log_archive_dest_state_5
allow the chain of log_archive_dest_state_6
allow the chain of log_archive_dest_state_7
allow the chain of log_archive_dest_state_8
allow the chain of log_archive_dest_state_9
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first Boolean TRUE
log_archive_max_processes integer 4
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
standby_archive_dest channel? / dbs/archIt's how 11g install sets up the destination archive initially after the database is created using s/n.
What you can do is to go to the settings of recovery in Enterprise Manager. You will notice that the number 1 destination of the journal Archive is set to usr/oracle11g/R1/dbs/arch number 10 is set to USE_DB_RECOVERY_FILE_DEST
Delete the number 1 entry (leave it blank). Apply the settings. This will force Oracle to log only flash_recovery_area.
-
Hello
10 gr 2 when I ask, I.
Then only three archived newspapers.SQL> select first_change#, sequence#, name from v$archived_log ; FIRST_CHANGE# SEQUENCE# NAME ------------- ---------- --------------------------------- 276182 1 E:\BASE\DB\ARCH\ARC_DB_00 001_0676107201.001 277133 2 E:\BASE\DB\ARCH\ARC_DB_00 002_0676107201.001 277525 3 E:\BASE\DB\ARCH\ARC_DB_00 003_0676107201.001
But I have more physical files:
It makes me upset. No explanation?ARC_DB_00001_0676107201.001 ARC_DB_00002_0676107201.001 ARC_DB_00003_0676107201.001 ARC_DB_00005_0671281385.001 ARC_DB_00006_0671281385.001 ARC_DB_00007_0671281385.001 ARC_DB_00008_0671281385.001 ARC_DB_00009_0671281385.001 ARC_DB_00010_0671281385.001 ARC_DB_00011_0671281385.001 ARC_DB_00012_0671281385.001 ARC_DB_00013_0671281385.001 ARC_DB_00014_0671281385.001 ARC_DB_00015_0671281385.001 ARC_DB_00016_0671281385.001 ARC_DB_00017_0671281385.001 ARC_DB_00018_0671281385.001 ARC_DB_00019_0671281385.001 ARC_DB_00020_0671281385.001 ARC_DB_00021_0671281385.001 ARC_DB_00022_0671281385.001 ARC_DB_00023_0671281385.001
Thank you.Hello
To check if your database has been opened with the reset logs option, you can check the alertlog file of the database and you can also check it from view of v$ database.
Kind regards
Navneet -
Stolen security problem applications.
I have a problem with the IE browser with hotmail (as well as other applications that are open) being stolen. It only happens in a few minutes to insert a flash drive on a public computer and with broadband. I scanned the disc flash with security essentials and moy. I manually checked all files, .dll and .exe and nothing seems out of the ordinary. I have to immediately go in and change the password to something very intense otherwise hotmail is hijacked, the password changed, so I can't get in, and e-mail list gets email Sales. Any idea what's going on, what to look for and how to deal with this? He happenned several times a week for several months.
Please note that sometimes not all the time. It's as if someone has to be waiting on the other end. It doesn't happen more than once a day. I'm guessing that there is some sort of "marker" on the flash drive. Come to think of it, it does not is it on public compouters with win 7, vista or XP. He also, only happens to a place so far (I use public computers in other places).
Hello
You have formatted the FlashDrive as suggested in my previous post?
Your hypothesis is right, there might be a virus file (spyware) that is causing the problem and the antivirus applications are unable to find it.
-
Archives newspapers gap between primary and Standby.
Hi the gods s/n,.
We had a shipment of newspapers reporter last night of primary DB DB (Oracle 10.2.0.5) on hold because of usage of network issue. And today morning even once, we allowed log shipping.
But when checking for synchronization, we found that there were archive gap the query log in the Standby below.
SELECT high.thread #, "LowGap #", "HighGap #" FROM)
SELECT thread #, MIN(sequence#)-1 "HighGap #
Of
(
SELECT a.thread #, a.sequence #.
Of
(
SELECT *.
V $ archived_log
) a, (
SELECT thread #, gap1 MAX (next_change #)
V $ log_history
GROUP BY thread #.
) b
WHERE a.thread # = b.thread #.
AND a.next_change # > gap1
)
GROUP BY thread #.
),.
(
SELECT thread #, MIN(sequence#) ' LowGap #
Of
(
SELECT thread #, sequence #.
V $ log_history, v$ datafile
WHERE the checkpoint_change # < = next_change #.
AND checkpoint_change # > = first_change #)
GROUP BY thread #.
) low
WHERE low.thread # = high.thread #;
OUTPUT:
THREAD # LowGap # HighGap #.
---------- ---------- ----------
1 23635 23640
I'm newbie DBA and struggling to get the solution. Google but could not find any exact solution I can't risk my DBs Production. No help from this professional forum Oracle would be great.
How to get the above missing sequence in the standby and get synchronized with the primary?
Kind regards
Ritu
Yes... what appears to be the case.
You can also use the following to check:
list backup of archivelog sequence = 23636;
and it should return a message like "specification does not backup.
It looks like an incremental backup will be your best bet.
-
Log of RMAN backup of files looking for bad archived newspapers
I have an RMAN backup, which is a database called EBIZ01PD. The backup is a failure because he's trying to find the archived logs that belong to a different db named EBIZRED that is located on a different server. I'm new with RMAN and any help would be great.
[run {}
allocate channels ch1 type 'sbt_tape '.
PARMS = "BLKSIZE = 262144, ENV = (CV_mmsApiVsn = 2, CV_channelPar = ch1, ThreadCommandLine = BACKUP jm - 45 - a 2:233 - cl 43 - ins 40 - 22-j 17828 - jt 17828:4:1 - ball 1 - bap 0 - rap 0 - SPC 0 - VMR 0 - ms 1 - newspapers - cn nvciEBIZDB - Instance001 - vm nvciebizdb.nvci.org vm)" "
TRACE 0.
setLimit channel ch1 maxopenfiles 8;
SQL 'alter system archive log current;
backup
filesperset = 32
diskratio = 0 (archivelog all delete input);
}
"exit";
]
RMAN Log:]
Recovery Manager: Release 10.2.0.4.0 - Production Thu Jan 22 04:00:49 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN >
connected to the recovery catalog database
RMAN >
connected to target database: EBIZ01PD (DBID = 1694328251)
RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 >
allocated channel: ch1
channel ch1: sid = 778 devtype = SBT_TAPE
channel ch1: CommVault Systems for Oracle: Version 7.0.0 (BUILD76)
from full resynchronization of the recovery catalog
full complete Resync
from full resynchronization of the recovery catalog
full complete Resync
from full resynchronization of the recovery catalog
full complete Resync
SQL statement: alter system archive log current
from full resynchronization of the recovery catalog
full complete Resync
From backup 22 January 09
Current archived log
from full resynchronization of the recovery catalog
full complete Resync
archived journal D:\ORACLE\ORAARC\EBIZRED\ARC00054_0674426118.001 not found or at odds with catalog
try another file archivelog thread 1, sequence 54
output channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the backup command to 2009-01-22 04:16:23
RMAN-06059: journal archived expected not found, lost of archived newspaper compromised recoverability
ORA-19625: error identification of file E:\ORACLE\ORAARC\EBIZRED\ARC00054_0674426118.001
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 3) the system cannot find the path specified.
RMAN >
Complete recovery manager.Hi Chris,
Could do aand retry the backup.
Can you post setting destination arch for EBIZ01PD?
The dbid for the EBIZ01PD and the EBIZRED would also be intresting.
Do you use a recovery catalog?
Kind regards
Tycho -
Physical standby Archive newspapers vs
Hi all
11 GR 2
Rhel6.5
I'm confused how archivelogs be appied physical standby.
CASES1:
Assuming I backup my primary Db with RMAN full backup now.,
then question crosscheck backup and delete obsolete. It will remove all archivelogs not yet taken to the waiting?
CASE2:
Right now my database pending is on a mode "real apply", so updates to the primary level is done directly on the eve as well, even if the archive logs have not yet carried.
Assuming that I will delete archive records at the primary level, such that it cannot carry, will be the sleep EEG 'gaps' in its Archives logs status?
Your comments are appreciated hightly.
Thank you very much
JC
Read in the mseberg response:
A way to remove applied log file stored in the backup database
How to ensure that RMAN is NOT delete archived logs that have not yet shipped to standby [394261.1 ID]
Kind regards
Juan M
-
two copies, including archived newspapers
Hello
on 11.2.0.4 on Win 2008
I want to double backup and also archived newspaper.
I wonder if archived logs is in the backup location, this will work and apply the log.will archived:
Run {}
duplicated to DUPDB pfile='E:\oracle\product\11.2.0\dbhome_1\database\initDUPDB.ora database ' backup location = "F:\backup\";
}
Thank you.
Thank you.
Can this work? Archived journal apply?
The archived logs are not archived log backup. Just the archived log.
Maybe we should go trough RECOVER the DATABASE after replication?
Backups are since last Sunday and archived newspaper yesterday (Monday, April 27).
-
problems - application crashes at startup on iOS
iPhone 5 ios6.1, bought Photoshop Touch on itunes. When I try to boot, it remains frozen on the blue screen with the PS Photoshop Touuch logo from. tried to install again, to respring, but nothing happens... Please help!
I didn't mean that you have uninstalled from iTunes, but the ipa has been removed from the unit and the office then retelecharge, just to clarify.
In iTunes, you select the application from the list, then tap on delete Apps.
They will be then removed C:\Users\username\Music\iTunes\iTunes Media\Mobile Applications.
If you did so the last thing you could try would be upgraded to 6.1.1.
Thank you
Ignacio
-
Applying archived newspapers again to duplicate db
Hi all
Oracle 9.2.0.4 on Solaris 8
I was just wondering how to go about enforcement archived redo logs from my primary to my double after that I already ran the duplicate?
Dual is:
duplicate target database < DB >;
This goes to 01:00 finishes around 04:00, but the user has some data in the main BC they want to put in the db in double and I don't want to reproduce the PB all once again, because it takes more than 3 hours and they can not wait...
All entries are appreciated.
Thank youHi Jamie CC,.
In general, once the database has been opened with resetlogs that you cannot restore forward again.
Kind regards
Tycho
-
Location of MX 8 archived newspapers
What is happening in the log files when you click on the action of newspaper archive under log files in the company administrator?
Before 8 MX, the log file was copied into a file with a file name number and left in the logs folder. MX8 which is not the case so the action of archive is not working or the file that is set elsewhere.May be worth it, see here:
http://www.Adobe.com/support/ColdFusion/downloads_updates.htmlSomehow, I doubt that this feature was broken in 8.0... but you never know.
-
ASM actively to avoid hot spots and make copies of archived newspapers?
Hi all
I have two small question, I hope.
1 ASM avoid hot spots of rebalancing active files, or the re - balance does when records are added and deleted? I believe that ASM is not "actively" hot spots in this way, simply avoids through its design, i.e. striping of files/entries across all the LUNS in a disc of the group, but need to confirm my manager.
2 using external redundancy, ASM does make copies of the archived redo logs?
Thank you
StuartASM avoids implicitly "hotspots" using the SAME methodology to strip everything on all the disks in the disk group, you are the answer is Yes. A rebalancing operation is necessary when the disks are added or removed from the disk group, if the number of disks does not change then the files will be always balanced on these discs (hope makes sense).
External redundancy faces ASM does nothing with the creation of redundant copies of all files, external redundancy means that you use RAID protection at the level of storage (e.g. RAID1), so ideally all data written to the asm disks is reflected at the level of storage on redundant disks in the RAID group. With external redundancy, the only way ASM will write two copies of a newspaper to check is if you tell the database to write in two places on ASM disks.
-
Problem application code "clickTAG"
I was told that my click through URL's embedded in my file. The seller to whom I send my flash file uses what is called "Dart" apparently. Currently, my code to make my link button to a Web page is on its own layer and looks like this:
myButton.addEventListener (MouseEvent.CLICK, myButtonFunction);
function myButtonFunction(event: MouseEvent) {}
var request: URLRequest = new URLRequest ("http://www.oldsecond.com");
navigateToURL (request);
}
But the seller told me the following:
The button should include the variable with the next click "clickTAG" set up correctly. Please note that "clickTAG" is case-sensitive. It should look exactly like this:
on (release) {}
getURL (clickTAG, "_blank");
}
But when I click on my button, I get the dreaded "current selection cannot have actions applied to it."
How can I fix it?
You must change your publication settings Flash to use AS2. The first code is AS3 to show you, the seller said to use AS2.
Maybe you are looking for
-
Satellite A110 - 178 PSABOE - where to find the old Bios
I have upgraded the bios to version 2.00, but I have a lot of problem with this version (I have win xp and I installed the correct version, NOT VISTA);I think has a problem with the OS and I format the laptop, but finally the problem is the Bios! The
-
How to check if DAQmx device is connected?
Hello I want to measure 2 channels of Daqmx USB-6211 permanently. If I want to write USB-6211, I do anywhere in the variable global project "Authorization of the usb-6211" false and do not measure anything, just write (value of the magnetic field, fo
-
Generation of reports in executable files
By using LabVIEW 2012 SP1, I created a vi that opens an Excel file and puts a string of data (time stamp and a bit of data). He travels once per second and adds the file very well on my laptop. My problem is that when I create an executable file, t
-
Vista SP1 - won't install not gets as much as 37056/89805
Vista SP1 won't install - gets as much as 37056/89805 (! 0xc01a001d! 37056/89805 (\Registry\)Machine\Components\DerivedData...) then it just stays there I have Vista Home Premium (Samsung R60 Plus laptop) and plenty of space to install anything
-
Keyoard USB does not work after unplugging and plugging in (Windows XP Pro x 64)
I had to move my computer then I unplugged everything, including the usb keyboard and mouse usb. The mouse and keyboard have no drivers as they are supposed to be plug-and-play. The mouse works well, the keyboard does not work... I get the message fo