Problem attaching text file of inventory analysis for the process of conflict for Oct 2014 CPU

Similar Questions

• Problem reading text file

  CVI programmer for several years, but it has been awhile. Trying to read in a text file that displays fine in say Notepad. The first line of text in the file is:

  All temperatures in ° F.

  If I use the scan function, say:

  public static char cdum [2048];

  ScanFile (DataFile, "%s > %s", cdum); I get these results:

  cdum [0] is - 2

  cdum [1] is 65 (which is the ASCII character 'A')

  The rest of the cdum is all zeros.

  In a hex editor in decimal display grouped by bytes, the line is:

  0 255 254 65 0 108 0 108 0 32 0 116 0 101 0 109 0 112... as the display looks like

  ybA.l.l.. t.e.m.p.e.r.a.t.u.r.e.s.. i.n.. °. F....

  So I get the scan function is to see the start character, then by pulling the 65 and placing in the location cdum [1], then strikes the character 0 and leaves the function of scan as she found an end of line. Trying to read in the entire line and the subsequent data float line, but is not serious, I can understand that our after I get over the initial problem above.

  Can someone help me with this? I have no problem reading in ordinary text files, but this one is as it is grouped in words rather than in bytes. Have you tried a bunch of different Scan function modifiers source and target [xt0, w #, etc.], but nothing seems to work.

  Data file attached.

  Thank you-

  Scott

  Hello

  I downloaded your file, it is opened in Excel because of its extension and the settings on my computer. I then wanted to save it as a text file normal to see in Notepad and read with a simple C program. In doing so, Excel told me: some features in your workbook may be lost if you save it in Unicode text.

  This is consistent with your observation of 16-bit data.

  LabWindows/CVI, unfortunately, does not support the Unicode character set and functions of the library operated at only 8-bit characters.

  So I would say to convert your file to 8-bit characters; You can also support the pursuit of the Unicode support in CVI here

• Is it possible to attach multiple files to a contact in the address book?

  I stopped using WinPIM for our small business when I paid for the sync option and it has stopped working. Because the devs don't understand much English, I could never solve this problem. I discovered on Thunderbird and go to calendar/address book/email program.

  The only thing missing to make it a PIM for business, it's that you should be able to attach multiple files to a contact. Currently, I am using the photo upload to join estimate/job a customer. But if the customer calls for additional work or in the case of entrepreneurs, we must be able to set each worksheet in contact with the contractor.

  A way to do this?

  UPDATE: I think I found a way to do it. I can reach the estimate for the event file created for the appointment. However, I have a problem because the Windows Photo Viewer is not an .exe file and Thunderbird allows you to choose an application program to associate to open the attachment. I tried to find Windows Media Center, but it does not under Program Files or Program Files x 86, even though I know that it is installed on my Windows 7 laptop, as it appears as an option for default programs for images.

  I'd appreciate any help I can find a way to open these without having to use Adobe Photoshop (my only other option).

  Picassa is a program to look at a picture. So yes, I have ideas, the install if you have something to select.

• How to attach a file to my question on the support of mozilla?

  I need to attach a file of about 800KB .pdf to my question on mozilla support so that those who want to help can understand and know in detail which is my real problem. How can I do?

  Try to use a free files hosting siteand download this PDF file. Then after the a hyperlink to this file to support contributors see.

  COR - el mentioned already, this forum only allows to image files. It is not setup for 'accept' other types of files.

  But as John mentioned, if your intention is for a discussion of adding the feature to create your own Firefox search engine, is not a subject suitable for this support forum. Suggestions for new or improved features for Firefox is best done through the submit comments...
  https://input.Mozilla.org/en-us/feedback

• Handling former projects where the xml-text-files have been imported through the Panel of the chain.

  Hello Adobe support team,

  We're going to go from the Adobe flash professional CS 6 to animate CC and we have already purchased licenses for our developer team. In all our former software projects, we have imported and exported text to the screen (xml_files) through the string table to assign the ID. It was very uncomfortable for us, because all our projects are multilingual. Now, we read in the animate using the channel Panel is obsolete with CC to animate. So our problem is how to manage our current programs where all text files are based on the Panel of the chain.

  Find out here: How can I load external XML content to my HTML5 doc?

• Why the file name of the file as an attachment with Annotations "attach a file" (trombone) become unknown when the observations are published?

  Our company recently purchased Adobe Acrobat Pro XI intended to be used for shared electronic reviews.  We use the send for shared review in Adobe Acrobat Pro XI, and all the comment tools work as expectedexcept the trombone in Annotations.

  When a Word or Excel or Image (png, jpeg) file is attached using the trombone of Annotations, the initiator may initially see and open. But once feedback is enabled and the review file is closed, the file 'Name' becomes 'Unknown' (even if the Description is the correct file name and extension).  Change information are unknown, such as size and compressed size.

  When the control file is then reopened, even the initiator cannot open the file, although:

  • The location of the file is marked with the paper clip in the document.
  • The file name is displayed in the list of comments with the name of the initiator.
  • In the list of attachments (the paper clip under the thumbnails and bookmarks), the name appears as unknown, shows the file name Description, update is unknown, the size is unknown and compressed size is unknown.

  
  

  The file name cannot be published, although the Description file can be.

  We have followed the procedure described in the tutorials but may not know how to resolve this situation.  As this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please leave out the basics because we are new users.

  We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI is a Windows platform.  Can someone please give us some advice how to get this function runs as described?

  The bug is fixed in the latest Adobe Acrobat Pro XI 11.0.09 update (update: in Acrobat Pro, go to help-> Check for Updates...).

  -Rohit Sharma

• formatting of text file external to HTML during the loading of a textField

  I'm new to actionscript, and I can't find examples of code for what I'm trying to do.
  I am loading a textField with addChild into a movieClip and want the external text file that I load into this textField to render in the textField in HTML. I enclose the code that I use. If anyone can help or has sample code I would be very happy. Thanx

  Thank you very much, that it has sorted them.

• Write records to a text file to specific columns in the text file

  Help please! I'm a noooooooooobbbbbb!
  
  I searched this forum looking for a procedure that will write my database records in some neck (positions) in a text file. Example:
  
  
  TONY 1234 TEST 84889922 Y 34 TORCHCOMP 34
  5678 BOB JOHNS N 43534534, 56 SAFDWEERE 65
  
  I think I would install as variaables:
  
  Consumer_ID = consumption (position 1, 5)
  Name = name (10,20 position)
  Invoice_No = invoice (30, 40 position)
  
  etc.
  
  Any input will be greatly appreciated
  
  Thank you

  If you want to write to a file on the database server where your oracle database is installed to see this link [UTL_FILE | http://www.psoug.org/reference/OLD/utl_file.html]. or if you want just a plain sql uses a coil.

  spool c:\file.txt
  select rpad(to_char(consumer_id),5,' ')||'     '||
         rpad(name,10,' ')||'          '||
         rpad(invoice_no,10,' ')
    from [table]
  spool off
  

  the function RPAD() will create white space.

• Text files do not open in the order specified by Batch file

  Hello

  I have the batch such as below:

  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00625\File1.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00626\File2.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00630\File3.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00635\File4.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00636\File5.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00640\File6.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00645\File7.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00650\File8.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00670\File9.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00680\File10.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00685\File11.999".
  Start "" "C:\Program Files\Notepad++\notepad++.exe" "C:\Temp\0331\S00695\File12.999".

  It opens 1 instance of NotePad ++ (similar like UltraEdit but FREE) and opens all the files above (I associated with the extension.999 NotePad ++) as tabs within the app but it opens them in any order (9,8,1,6,2,10,3, etc., etc.) and not in the order I specified above (File1.999, then File2.999, then File3.999, etc., etc.).

  What additional syntax is necessary for NotePad ++ to open them in the order (that I have loaded in commands) in 1 case?

  Thank you

  I never really came across a need to pack in batch files, but I think I found the answer.  StackOverflow.com has a discussion about it here:

  http://StackOverflow.com/questions/69068/long-commands-split-over-multiple-lines-in-Vista-DOS-batch-bat-file

  It seems that you just use a ^ mark to denote a continuation.  So, something like this:

  Notepad.exe "C:\Temp\File1.txt" "C:\Temp\File2.txt ^.

  «C:\Temp\File3.txt' C:\Temp\File4.txt"^ «»

  "C:\Temp\File5.txt" "C:\Temp\File6.txt".

  Just note that you must make sure that the spaces are included if need be, even if a winding is there.

• How read text file and store it in the database

  Respected by all,
  
  I have the text file on my computer.
  I use forms6i and oracle 9i.
  I want that when I press the button then specifice world in text file is read and display on the form to be stored in the database.
  Please provide a solution.
  
  Kind regards

  Hello

  Studying the functions of the package TEXT_IO()

  http://www.Oracle.com/webapps/online-help/forms/10G/State?navSetId=_&Navid=3&vtTopicFile=f1_help/Oraini/c_text_io.html&vtTopicId=

  François

• How to load a text file to a Web page and processes using a Java application?

  My apologies if the question is off topic.
  
  I want a user to load a text file to a Web page and have a pre-existing Java application, I created the process text file and return the results to the user. The Java application is fairly intensive memory. It is expected that many customers will download at the same time. What is the easiest or most effective method to achieve?
  
  Thank you

  user11105060 wrote:
  What is the easiest or most effective method to achieve?

  A servlet and a few gigabytes of memory added to the server (if necessary).

• Write the measurement data in text file every 10 seconds for a duration of 2 seconds, creating a new file every time.

  Greetings,

  I'm working on an application for the acquisition of data that runs constantly and need to record data at intervals of 10 seconds for a duration of 2 seconds.

  On each interval recording, I have to create a new file that contains a number of journal in the name of the file (Test_1.txt, Test_2.txt,...);

  and add to the current time and date on the header of the file.

  My question is how can I do this with what I have so far?

  The attached vi is a notion of what I am trying to accomplish. The application also has the DAQmx read functions in the vicinity while loop.

  and a few manipulations of data. Apart from the main loop, I create and launch tasks DAQmx.

  Thank you for your help.

  Best regards

  Matej

  Hello

  Thought this one myself.

  Here is the solution, if anyone needs something similar.

  Best regards

  Matej

• Can someone tell me how to attach a file to a message in the forum?

  I need to send my FLA file to a person who answered my original question. How can I add it as an attachment?

  Thans for help

  Yve

  The ability to attach files has been disabled some time ago.  You do ensure that this person is receive as an e-mail or post the file on your own server for them to download.  There are sites that provide free download/download services, although I can't recommend a.

• Problem with text not appearing is not in the default size of the style

  Hi all. I have a problem with styles in InDesign CS2.

  Basically I have a selection of styles for some self help books I have spread on a regular basis. Several styles to load the text to be set to 10 points with a line spacing of 12.5 - However, when I use styles, text is in fact 12 points with 12.5 in the lead with no. '+' sign on the style, which indicates that the text has been changed somehow out of style. When I click on the style to check, it still maintains it should be 10 points, and eventually, I will change the text manually with the eyedropper in other styles. It's almost like it's getting a size by default from somewhere, but I don't know where. I've renamed the styles and the recreated from scratch, nothing helps. Any help is appreciated! Thank you.

  Are you sure that you do not have an applied character style?

  Bob

• Try to save a page on the internet as a text file on my computer. The one I read.

  I am trying to save a copy of a Web page. I can't save it as a page that I can read. Them is as many pages 'recipes' of payment, I need to present. I can print them out, but cannot be saved to a file. If I could save a file I'd not lose all the paper print all this just to turn around and scan to a file.

  The perfect solution to this problem is to install the freeware "CutePDF" on your computer.  This software will add a new printer to your computer called a "CutePDF Writer" and when you use this printer, it will create a ".pdf file" on your computer that you can store and review or print at any time in the future.  You must also install the freeware "Ghostscript", which is also provided on the installation/download page:

  CutePDF: <> http://www.cutepdf.com/Products/CutePDF/writer.asp >

  HTH,
  JW