Problem by dragging WBShapesToolBar after having repositioned

Similar Questions

• Problems w / CS cloud after having done a 30 day trial of After Effects

  I got a free 30 day trial of AE which has expired.  I joined Cloud CS but can not download AE now.  When I try to 'download', AE says Installation Manager is up-to-date and will not provide an option to download AE... I even deleted all the files associated with the trial of AE I could find and it says AE is up-to-date and does not allow to complete the download.  Other applications download OK.

  Any suggestions? I need help - AE to work - thanks!

  OK, this would cause problems you are currently experiencing.  For Adobe Creative applications you must use the uninstaller located in Applications/Utilities/Adobe Installers.  Once you have run the uninstall program you can then re-download and install After Effects.

• Internet connection problem hp dv6-1127ee after having upgraded to windows 7 ultimate

  I upgrade my windows vista to windows 7. Everything went well but I can't access the internet wireless or cable. I try manything as IP reset or uninstall the driver. Also install the updated hp website driver. I tried safe mode and connection! What should I do?

  Hello

  If it connects in safemode, then it could happen due to the software antivirus installed on the computer.

  First try to connect again by turning off the antivirus or any security software installed on the computer or perform a clean boot >

  If it works then uninstall - reinstall the security software and update.

• Unable to add data to the Virgin DVD + RW double layer after having ejected backup problem.

  Did a backup using DVD + R double layer, and after having ejected the last media due to clerical error, I can no longer continue the backup due to the error: insert a disc - it seems that my hardware is no longer detect dual layer blank media. Works great on regular blank media 4.7 GB.

  Hi sal69,

  This problem is caused by physical limitations in DL (Double Layer) media. These limitations prevent any real use multisession. When the media is ejected, the disc session may be closed for DVD-ROM compatibility. On these discs, DVD-ROM compatibility is achieved only when the disc is complete. When the disc is finished, it is closed forever. The physical characteristics of the media require two layers will be burned so that the disc can be played in a DVD player. The two layers can be burned only by closing the disc. As soon as the disc is closed, no additional data can be added to him.

  You can follow the steps mentioned in the link below

  You may be unable to save more data on a DVD-R DL disc or a DVD + R DL disc after it is ejected into Windows Vista

  http://support.Microsoft.com/kb/928355

  You can download and install the latest service pack on the computer

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I reinstalled creative cloud and Dw after having a problem with Windows 10, but they do not work after restarting my computer. It's as if they are not installed

  I reinstalled creative cloud and Dw after having a problem with Windows 10 and I restored it to windows 7, but they do not work after restarting my computer. It's as if they are not installed.  I worked through all the steps without result troubleshooting.  Everyone experienced similar?

  Hi Trickstar777,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe

  I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe product install.  I have used the cleaning tool Adobe several times and uninstalled other Adobe products, but none worked.  I have uninstalled/reinstalled this version of Dreamweaver CD several times when changing computers and after you had computer problems. A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.  Help, please.

  A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.

  Absolutely not. You're misinterpreting things. Activation does not happen when you simply run the installer, although later. This means that what he says - there is another 'install' pending / assets on your system, which means somewhere, there is a process (invisible) always blocking things. Whatever it is, since you have not provided any real technical info, we can not advise specifically. If you are using Windows, you can check your task manager and to terminate any process setup.exe and msiexec.exe more potentially will need to manually fix / remove some registry keys. What beyond this, you will be much more accurate.

  Mylenium

• After having updated for Windows 10, if I try Sava a file in TIFF format, it will not save and Photoshop freezes. Is this a known problem and is at - it a cure please?

  After having updated to Windows 10. If I try to save a file in TIFF format, it will not save and Photoshop CS6 freezes. This is a known fault and is at - it a cure please?

  • Please would the ' Save in the background ' option and check if this helps you in any way. "
  • To activate this option, choose Preferences > file management and save in the background check
  • If this does not help, try to reset the Photoshop preferences after the bottom of the article:

  Using Photoshop | Preferences

  PS: Restart Photoshop when you make changes in the preferences.

  ~ Sarika

• Windows Update for Vista family 32-bit premium does not update all. 57th error and sku011.cab for office 2003. Malicious tool not updated. Stays on the list was updated even after having managed States.

  Office 2003 sp3 do not install in windows update. It is a 108.2 MB file, no kb #. Under 2 other 2003 office updates. KB977713 for office outlook and for office 2003 update kb907417. 57F error message comes out after having failed in windows update. Sku011.cab missing error comes just after process fails at the end of the attempt to update for the updated 2003 3 office. Tool kb890830 in windows update to install malicious but indicates successful when finished. Returns to windows update to install. All other above mentioned updates show missed.

  Thanks for your time,

  Vincent Ciaramella

  The malicious software removal tool does not use an installer. As a general rule, when you run the malicious software removal tool, it creates a temporary directory named at random on the root of the drive of the computer. This directory contains several files, and it includes the Mrtstub.exe file. Most of the time, this folder is automatically deleted after the tool to the end of execution or the next time that you start the computer. However, this folder may not always be automatically deleted. In these cases, you can manually delete this file, and this has no adverse effect on the computer.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  With regard to the Office updates:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyId=1B0BFB35-C252-43CC-8A2A-6A64D6AC4670 seems to be an update very old "update for Office 2003 (KB907417)"

  With regard to the http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=da24d44b-4d6e-4bcd-b7cd-ca56bf6c0ba7
  Update for the junk e-mail in Outlook 2003 (KB977713) filter

  Have you tried manually download KB977713 and install the same.

  Sometimes, however, it still doesn't work: full-file version update may request Office source files
  http://support.Microsoft.com/kb/840169

  TaurArian [MVP] 2005-2010 - Update Services

• Canon 5 d MK IV LiveView stops immediately after having been pressed with Tamron SP 70-200mm F/2.8

  My Canon 5 d MK IV Live View will stop immediately after having been pressed with a Tamron SP 70-200 F/2.8 Di lenses.

  I don't see the problem happens with my lens F / 2.8 Canon 24-70mm.

  This problem happened in video mode.

  I hope that there is a setting I have to toggle to make this objective work in Live View mode?

  Thank you

  Mark

  I spoke to my local camera shop, they said, that it should be referred to the Tamron for the update of the firmware, they said, that Tamron has a fairly good hand around time of approximately 5 days. I've probably will send mine once I'm done with a shoot.

  The lens works very well for me, normally, the only problem for me is Live View. If this is not the case, use the LIve View, it seems to work great so it's not paralyze me right now, but it would be nice to just get it fixed if Live View will work.

  The camera is also on Firmware V1.01 so their will be updates firmware for it also and as a previous post said that Canon will also address the issues with 3rd party lenses. Great! After that all the Canon doesn't want people who have glasses of third parties avoiding the body of the camera for this problem. It's logical Canon would solve this problem.

  So far it is a minor bump with third party lenses. I've always been able to work with my Tamron and Sigma lenses. Just a couple of workarounds until the firmware is updated. It isn't a deal breaker for me. This camera is a pleasure to shoot with and I am very pleased with the Canon has advanced in the development, image quality with the dynamic range and low light performance. I am happy and have no regrets.

  I would still recommend this camera to a friend.

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• program lost scanning and photo gallery after having a virus deleted.

  Original title: digitization program lost after having a virus deleted

  I have now no windows Photo Gallery program and no way to set up analysis on my new printer hp that is supposed to analyze. Where should I start... with hp or downloadsing free download windows photo gallery

  Hello

  1. they are missing or you are unable to open then?
  2. do you get an error message while trying to open these files?
  3. what software of scans are you referring?

  I suggest you try the steps and check them off below.

  Step 1: Try running windows photo gallery and the C drive scan software.
   
  Access to the photo library path: C:\Program Files\Windows Photo Gallery\windowsphotogallery.exe
  Research of software scanning in C:\Program Files\
   
  Step 2: Perform scan sfc on your computer.
  Reference: http://support.microsoft.com/kb/929833

  Scan a document or file
  http://Windows.Microsoft.com/en-us/Windows-Vista/scan-a-document-or-file

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• No video after having replaced the graphics card and power supply

  I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.

  Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.

  From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.

  In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.

  The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.

  After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.

  Does anyone know the purpose of the wires that were connected to the top of the Tower?

  They would cause they cause this problem if they are not correctly connected?
  Any suggestions for the possible causes of the absence of a signal from a video card?

  I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.

  Now I feel kind of stupid, but I know better next time...

• Could not import the m2ts in first CC 2015 files after having upgraded to Windows 10.

  Hello! I have a problem after having upgraded to Windows 10. Please help me.

  I upgraded the operating system to Windows 10 by windows update.

  After that, I had some problems with language settings keyboard, so I have made a new account.

  Now in my PC, there is first CS6, CC, CC2014, CC2015.

  After upgrade, I can not import M2TS in CS6, CC2014, CC2015, and latest projects with M2TS files cannot load those, just to show the question icon.

  When I try to import M2TS newly or connect, they show a popup message with "the file has an unsupported compression type.".

  Import M2TS is possible in CC.

  I want to know how to fix it.

  Trash all your media cache. Rename the folder in the files, and then try again.

• Unable to Load Page after having extended a controller of

  Hello
  
  I work in the extension of the controller. Now the problem I'm facing is all by making the extension of the controller.
  
  While the extension I've mistakenly entered the wrong path for the custom package that will be the extension of controller class.
  
  Now after having extended the CO main, when I'm trying to load the page it gives me an error of OA. My intenstion was to customize the page and load the extension of controller to replace by the PDC.
  
  Because I am not able to load the page, impossible to configure the extension of controller via the customization of the page. The page is not be responsible and not allow me to go further.
  
  Please help me solve this problem. How can I go back to my original state of the page with the PDC.

  Hello

  There is a functional administrator of responsibility. Click on that there is a customization of the tab at the top of the page.
  Click on that it will ask u for the path of the document. give your way here and apply.
  After doing this, you will find two options persionalisation and manage the customization.
  Click on manage customization, there are several options, you can disable or remove your customizations from there.

  After making your desired, click on apply.

  Thank you