problem by removing the Babylon toolbar and put Firefox as it was

Similar Questions

• I want to remove the Babylon toolbar. Help, please!

  I recently upgraded to Firefox 5.0. I do not want to have installed Babylon Toolbar and do not want. Help me please uninstall this add-on. Thank you

  See this support article:
  
  https://support.Mozilla.com/en-us/KB/uninstalling%20add-ons#w_how-to-uninstall-extensions-and-themes

• How can I remove the Ask toolbar in Mozella Firefox?

  The Ask toolbar is always on the right side of my Mozilla Firefox toolbar. It is built directly into it. Ask does not appear on "Add or Remove Programs" on my control panel. A description of an "application Toolbar Remover" suggests to download 'Ask Toolbar Remover' since the link in 'resources '. I can't find anywhere of 'resources '. Remove Ask from my Mozilla Firefox has become a passion of mine, apparently. I spent hours trying to remove it, without success. Help!

  It may be in Add / Remove programs under a different name, but it should always have the logo "Ask."  See http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4

  First check in Add-ons: http://support.mozilla.org/en-US/kb/disable-or-remove-add-ons

  This can also help--> http://forums.mozillazine.org/viewtopic.php?f=38&t=627084&p=5069645#p5069645

• There is an area in which I can't use my mouse to click on. It is about 1 1/4 inches high. On my Yahoo home page, it begins at the lower end of the Yahoo toolbar and get down from there. This area exists on all sites, that I'm on Firefox.

  This area exists on all sites, that I'm on Firefox. If I switch to IE as my browser, I don't have the problem.

  Recently, the Yahoo toolbar and the extension of Babylon have been reported because of this problem. They appear to overlap invisibly on the top of the display of the web page. If you have one or both, uninstall or disable them/it or see if an update is available that solves the problem.

  • See-> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
  • See-> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
  • See-> http://kb.mozillazine.org/Uninstalling_toolbars

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• My XP Home Edition has been plagued by a ghost at startup window since I removed the Bing toolbar.

  My XP Home Edition has been plagued by a ghost at startup window since I removed the Bing toolbar.  The window title bar is simply labeled "Microsoft" and the window is empty.  I think that this problem is related to a very slow start.  I have this problem have fought for almost a year and cannot locate the source.

  Any help would be much appreciated.

  original title: Ghost at startup window

  The window title bar is simply labeled "Microsoft" and the window is empty.

  It appears in the Applications tab of the Task Manager?   If so, use with the right button go to the process about which app it is.   If the name of the Image doesn't have a clue you could also use ProcExp to see what is the command line.  (Press Ctrl-Shift-Esc to start TM.   Other OS show the command line in TM, but I don't think that makes XP.)

  HTH

  Robert Aldwinckle
  ---

• How can I remove the floating toolbar by default in CS5?

  For the life of me, I can't understand how to remove the floating toolbar.  I get this toolbar, every time I launch Illustrator.  I tried to delete the preferences file and that does not clear the problem.

  Here is a picture of what I see:

  

  He has no control on the toolbar.  Make a right click has no effect.  I am running CS5 on Win7.  I can drag the empty toolbar and dock it right under the top menu, but upon reboot, it appears again in the middle of the drawing.

  Does anyone have an idea on how to fix this?

  -DK

  Finally figured it out:

  The floating toolbar has been invoked by the CADTools plugin.  To make it disappear, go on:

  Window-> CADTools-> hide all panels of the CAD tools.

  Peace at last!

• What is the ConnectDLC toolbar and how do I get rid of him?

  All of a sudden I get ConnectDLC toolbar as the default toolbar and can't get rid of it and also CONNECT is web page and will not go away by default. How can I get rid of these?

  Hello, go in firefox > addons > extensions & remove the toolbar from here.
  Remove a toolbar that has supported your Firefox or the homepage search

  then install the reset search addon - he'll come back more often customizations make these adware programs in default firefox: https://addons.mozilla.org/firefox/addon/searchreset/

• I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up ever since I downlo

  I need to know how to remove the most recent version of Firefox. I JUST downloaded tonight and my computer does not have this edit bar little to work with, so I can download the reader good Adobe and my internet was screwed up, since I downloaded the new version of Firefox. I want just the old version of this back because I can't download the Adobe stuff which is necessary to protect my computer against hackers apparently not. It would have been nice to know he had a problem with the new update of Firefox BEFORE I downloaded it. I have Vista, which is usually a problem with Adobe and Firefox. I don't seem to be able to run a lot of Adobe at all on my computer because of the Vista.

  This has happened

  Each time Firefox opened

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

• Satellite A30 - 504 - how to remove the old HDD and new mount?

  Hello

  I have problem with my laptop satellite. After the turn on I've got Announces s.m.a.r.t. disk is damaged.

  I do not have it is why I do not know how to remove the old HDD and replace the new statement.
  I will be grateful for the help.

  Hello

  Looking first for similar discussions in this forum? I guess that you didn t ;)
  The advanced search option is very useful and you can search for single yarn that could help you.

  I found this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12526&MessageID=45688

  and this

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12547&MessageID=45752

  It seems that the hard drive on your A30 is in the optical drive, and you must remove all first the STRANGE before you get access to the HARD drive.

  Best regards

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• remove the administrator name and password

  cannot update or download programs. pop up States 'type admin name'... but the area type in 'GRAYED OUT' help!

  If you had only an administrative user account and it is him that you damaged, all is not lost. You want to allow the built-in Administrator and create a new administrative user by general recommendations for the establishment of user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to log on to the built-in Administrator account.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• I can't remove the iminent toolbar

  I get a message saying "action limited please contact system administrator' whenever I try to remove the eminent toolbar"

  If you are in an office environment, contact the administrator, if in a switch of family environment on the account admin that was put in place when installing win 7.

  If none of this works, try to delete it in SafeMode (F8)

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• How to solve "Download error" not corrected by removing the files AAMUpdater and OOBE

  Hello

  I spent several hours today to try to fix the access to my CC apps for photographers (LR and PS), without result. Initially, everything worked fine until I was logged in as administrator, but trying to use creative cloud as a standard user on my laptop, I get a "Download error" message in the part CC App, inviting me to "Reload request" which of course does not work. I searched on the Internet and various forums on how to do this and found a page on the Adobe site help who instructed me to remove the AAMUpdater files and OOBE in the Adobe User-specific directory into account, I did (it took me a while to understand how, because first I could not remove the OOBE folder). Once I had done that, and after you disable my Norton Internet Security and MalwareBytes protections, I restarted the desktop application Cloud Creative, logged into my account and hope to find my LR and PS Apps that I know are on my computer, since I had them used in the Admin session, with no success. The same error message ""Download error"/"Reload the application"is displayed, and by clicking on the button reload the Application has no effect.» I'm really weary about this, more so than at the same time, I have the same problem when you sign in as an administrator. If nothing works anymore. Help, please! Moreover, I tried to start a conversation with the assistance of Adobe service, got a number, but then nothing happened.

  Please visit: FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

  If you have tried all of these suggestions, please contact support for assistance:

  FAQ: How to contact Adobe for support?

• Remove the default toolbar

  Hello

  I was just wondering if you can remove the default toolbar in the published projects. The one in the bottom of the page. I'm going to insert an image.

  

  It's just that I made my own toolbar and it might be confusing with two.

  Kind regards

  Patrik

  Hello

  It helps when you mention the version you are using. If it's CP5 or 5.5 open Project, Skin Editor and uncheck the PlayBar, and to avoid having a large gray left edge, also borders.

  Lilybiri