Problem by undoing the changes made using PL/SQL in OFA

Similar Questions

• Service Pack 3 has not finished click OK to undo the changes that have been made

  Internet Exolorer 8, service Pack2 installed.  Tent to download and install service pack 3 again, Error Codes: several years ago

  Not enough free space.  Free storage, Total currently 6.06 GB GB 32.3.  HP pavilion 551w.

  Error codes: 11/10/09 OX80070641, same code on 29/09/12

  04/07/13 code OX8024600

  Remove Service pack 3 and reinstalled several days ago:

  "Preparing for download.

  Backup of files

  SP3 backup file. CAB

  Backup registry

  Creation of Restore Points

  Download Service Pack 3

  The initialization of the made installition

  Win SP3 installation

  SP3 Setup file. CAB

  Error installing service pack 3 Service pack 3 installation did not complete.

  Select 'OK' to undo the changes that have been made.

  Access denied»

  Firewall and anti virus disabled for installation.  Graphic bar showed about 75 to 80% installation complete.

  So far I have not checked to undo changes.  With the od SP3 download I show 5.82 GB of free space.

  As I have not checked to undo the changes, no error code appears for this latest attempt to download and install SP3.

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"
  http://support.Microsoft.com/kb/949377

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Error message when you try to install Windows XP SP3: "you don't have enough disk space on % lecteur_systeme % to archive the uninstall files.
  http://support.Microsoft.com/kb/949375/

  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384/

• How to merge the changes made to the same analysis?

  Hello

  I have an analysis and there are two issues raised against it, in a real environment.

  In development, the problems starts at the same time. However, only the first resolution should be tested. Assuming that the first problem is solved, how can I "apply" the changes made to the second issue fixed / fixed?

  What are the means and best practices in this situation? OBIEE version is 11.1.1.7.0.

  Thank you.

  Kind regards

  Maury.

  You can use a text editor such as Notepad ++ and the plugin in comparison to compare the XML from the analyses and differences in merger.  That would be the fastest easy/more...

  Just a word of warning - this is completely not supported by Oracle and can VERY easily lead to a corrupted analysis. You'll find plenty of OBIEE'ers experienced out there who have hacked the XML on analysis, but you have also messed up in the process. Always make sure you have a backup and Don ' t cry about it if it breaks.

  To the OP - I don't think that there is a good answer to this problem. The analyses are simple objects, there is no option of merger for them.

• Problem to save the changes to the register at the next reboot

  Hello

  I've been infected 2 days ago and Windows Update does more (error code 80246008). So I cleaned the files corrupted with MicrosoftFixit found on the Web.

  Finally, I got the BITS service works again with the next batch, who calls himself the file 'BITS.reg ': program

  SC create BITS binpath = "c:\windows\system32\svchost.exe-k netsvcs" = delayed auto start
  Regedit /s c:\Users\fab\Desktop\BITS. REG
  net start bits
  rmdir /q /s %windir%\SoftwareDistribution
  regsvr32 /s c:\windows\system32\wuaueng.dll
  regsvr32 /s wuaueng1.dll
  regsvr32 /s atl.dll
  regsvr32 /s c:\windows\system32\wups.dll
  regsvr32 /s wups2.dll
  regsvr32 /s wuweb.dll
  regsvr32 /s c:\windows\system32\dllcache\wucltui.dll
  net start wuauserv

  I have run this command as an administrator file and the BIT key appears in the registry with Windows Update work very well.
  
  The problem is that the changes in the registry is not taken into account for the next boot of Windows 7 : I no longer see the BIT key and I have to run this program bacth whenever there is a new startup of Windows 7.

  Is it a straight issue of permissions on this key? I have change the owner as an administrator?

  Here is the BITS.reg file:

  ------------------------------------------------------------------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS]
  'DisplayName"="@%SystemRoot%\\system32\\qmgr.dll,-1000 '.
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  'Description"="@%SystemRoot%\\system32\\qmgr.dll,-1001 '.
  "LocalSystem ObjectName"=""
  "ErrorControl" = DWORD: 00000001
  "Start" =: 00000002
  "DelayedAutoStart" = DWORD: 00000001
  'Type' = dword:00000020
  "DependOnService" is hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 45, 00, 76, 00, 65, 00,------.
  6th, 00, 74, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 00, 00, 00
  "ServiceSidType" = DWORD: 00000001
  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 43, 00, 72, 00 65 00, 61, 00, 74, 00, 65, 00, 47,------.
  00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00,------.
  67,00,65,00,00,00,53,00,65,00,49,00, 6 d, 00, 70, 00, 65, 00, 72, 00, 73, 00, 6f, 00, 6,.
  00,61,00,74,00,65,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.
  00,00,53,00,65,00,54,00,63,00,62,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65,.
  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.
  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.
  00,69,00,76,00,69,00, 6 C, 00, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6F,
  63,00,72,00,65,00,61,00,73,00,65,00,51,00,75,00, 6f, 00, 74, 00, 61, 00, 50, 00, 72,------.
  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00
  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.
  00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, c0 d4, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Parameters]
  "ServiceDll" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f,
  00,74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00,------.
  71.00, 6 d, 00, 00, 72, 67, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Performance]
  "Library"="bitsperf.dll."
  "Open" = "PerfMon_Open."
  "Collect"="PerfMon_Collect."
  "Close" ="PerfMon_Close."
  "InstallType" = DWORD: 00000001
  "PerfIniFile"="bitsctrs.ini."
  "First of all Counter" = dword:00000774
  "Last Counter" = dword:00000784
  "First aid" = dword:00000775
  "Last Help" = dword:00000785
  "Object list"="1908."
  'PerfMMFileName '=' Global\\MMF_BITS_s. '

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Security]
  "Security" = hex: 01, 00, 14, 90, 90, 00, 00, 00, a0, 00, 00, 00, 14, 00, 00, 00, 34, 00, 00, 00, 02,------.
  00,20,00,01,00,00,00,02, c0, 18, 00, 00, 00, 0c, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00,------.
  00,00,20,02,00,00,02,00, 5 c, 00, 04, 00, 00, 00, 00, 02, 14, 00, ff, 01, 0f, 00, 01, 01, 00,------.
  00,00,00,00,05,12,00,00,00,00,00,18,00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05,------.
  20,00,00,00,20,02,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 04,
  00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 06, 00, 00, 00, 01, 02,------.
  00,00,00,00,00,05,20,00,00,00,20,02,00,00,01,02,00,00,00,00,00,05,20,00,00,------.
  00,20,02,00,00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS\Enum]
  "0" = "Root\\LEGACY_BITS\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  ----------------------------------------------------------------------------------------------------

  Any help would be appreciated

  Maybe the virus or parts of it is still there. Here are some tests I ran:

  • Reboot safe mode to check if the problem persists.
  • Restart in Repair Mode, and then load the system hive (probably located on drive C :) to check if the key has survived the shutdown process.
  • Create the artificial key HKLM\SYSTEM\CurrentControlSet\Services\BITSTest and fill it with some values and data to see if the problem affects a new key or if it focuses on the BITS.

  My own attitude is that an infected machine is a compromised machine. I don't have the time or patience to do battle with these facilities.

• How can I reverse the changes made by Mr Fixit from Microsoft Support

  Problem is that it makes a lot of changes on other user accounts that were unwanted office. It was after that I ran files and records of repair Windows problems with Microsoft Fix it Center.

  Hello

  1. what type of changes have been done on the computer?

  Every time that you run a FixIt it automatically creates a system restore point to revert back the changes. See the article below which explains the system restore in Windows XP.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

• Problem connecting to the server by using the url with the logical name!

  Hi all!

  I looked for information on this subject, but have not seem to found a solution.

  I'm developing a Smartphone application that needs to connect to a server to retrieve data. Then I use a direct connection with the correct settings (I hope):

  URL = "url of the server" + "deviceside:true" + "AFN:...» »

  The problem is that the connection should be done without Hardcoding the "apn". These are the tests I've done so far (assuming I'm always add the ' deviceside: true ' parameter):

  URL (logical name) + AFN OK!
  FAILURE of the URL (logical name)
  URL (static IP) OK!

  * by logical name, I mean a url as www.google.com

  What I need is to use the logical name, without the parameter apn!  Maybe I'm missing another parameter that I don't know?

  Some additional info that might be useful! :

  -The server is a server of Vodafone, which, as has been explained to me, should be on the list of white of the RIM (not sure what that means, but I guess it has to do with the fact that BB connection through the RIM at one point servers, and be in this list gives a sort of 'privilege' when you browse servers of RIM) , and I don't know it is publicly accessible as (see following)

  -An android version of the application works fine without Hardcoding the AFN and using the logical name (I guess it has to do with the RIM servers!)

  Any help or ideas towards the solution that it is greatly appreciated!  If I'm missing some info that you think I should add! Please tell me!

  Thanks for your help!

  Juan

  Thanks Peter!

  I could solve it by looking at the code of the alternative of the Api network in the link sent you me!

  The solution was the addition of the ConnectionUID parameter to the url String!  as to why this solves the problem I still don't understand it! (If you can enlighten me with the reason, I would be very grateful)

  This value is found in the service books!, I have the zip code just in case it helps someone!

  Hogshead string = null;

  Full book sb = ServiceBook.getSB ();

  Reviews [] ServiceRecord = sb.getRecords ();

  for (int i = 0; i)< records.length;="">

  {

  String cid = records [i] .getCid () .toLowerCase ();

  String uid = records [i] .getUid () .toLowerCase ();

  If ((cid.indexOf ("wptcp")! = - 1) & (uid.indexOf ("wifi") ==-1) & (uid.indexOf ("mms") ==-1))

  {

  Hogshead = records [i] .getUid ();

  }

  }

  then add the parameter: ConnectionUID = Hogshead

  Once again, thank you!

• Preset in LR 6.5.1 user does not contain the changes made to the selected picture.

  Hello

  " first things first: LR-help: ' Presets that you create are based on the current settings of the selected photo. »

  1. I opened a picture and make a few changes (tone curve, the camera calibration)

  2. I go to 'Presets', '+' sign: the changes I made (see 1) are NOT in the form "new develop preset", means that boxes like: your curve etc. remain unchecked.

  3. it's the same, when I try to update an existing user preset (right click: update with current settings).

  So: it's a bug, or is it a feature?

  Thanks for your help

  Avignon Purclot

  The OP never wanted all the control parameters.  The confusion is because they thought "current settings" mean "change settings" and we understand as "all parameters possible.

  So when they complain that the "current settings are not checked', they meant the" two they adapted are not checked, "we know 'current settings' means 'all settings' so we have first been interpreted their complaint of"current settings are not verified"as"all parameters are not checked.

• How can I see the changes made to a document in Acrobat Pro ms?

  I have a trial version of Acrobat Pro DC and do a proofreading job that requires changes to be seen, but they are not at the present time. My question is: can one consider? If so, how? And if not, what program with a free trial can use to do? Thank you.

  The correct workflow would be to add comments in the PDF and then send it to the authors. They then apply the changes to the original file format and generate a new PDF when finished.

• Problem to update the views by using templates

  Hi all

  I'm trying to implement the model of presentation using Cairngorm in my flex application. I have a problem to update the views using the presentation model.

  Here's what I do.

  1. I am trying to create a login screen.
  2. To store the current of the user logged in ModelLocator, I created a "currentUser" property
  3. My Member information screen (the screen is displayed after successful login) displays the username like this.
     • < mx:Label label = "{memberUI.fullname}" / > "
  4. I created a template, memberUI for Member information screen. It has a property called "name", which stores the full name of the current user.
  5. I created a method in the presentation model called setFullname() which does the work of definition of the fullname property. This function is called in the answering machine for the connection event.

       public function setFullname():void {
            var appModel:AppModelLocator = AppModelLocator.getInstance();
            appModel.currentUser = event.result as UserVO;
            var uim:memberUI = new memberUI();
            uim.fullname = appModel.currentUser.firstname + " " + appModel.currentUser.lastname;
       }
  

  But even when I was able to login, I am unable to display the full name in the view. Why is this happening?

  Can someone tell me what I am doing wrong?

  Thanks and greetings

  ShiVik

  I've seen two approaches to this within the PM + Cairngorm architectures.

  (1) pass a reference of your MP in your Cairngorm event to allow the command / responder call Update with the results of a service. It's an approach simple but tie your orders and the speakers to your PM class, which makes them less versatile.

  (2) have your PM record reminders with your Cairngorm event to allow results to be returned to your MP. Reminders may take the form of event, function references listeners or an object that implements IResponder.

  Unfortunately, I'm not aware of many examples online for this, but the following link to get (2) passing references to functions:

  http://www.allenmanning.com/?p=31

• CS4 opens unchanged file with the changes made to the different registered file

  OK, I searched for this but can't find anything. Probably because I don't know what is happening. (1) I opened a file from a CD raw in photoshop cs4, lets call it photo1.nef. (2) I saved the file under a different name on my HARD DRIVE after changing, photo1b.tif. I have not to form any save the file on the CD (cannot in any case). (3) now, everytime I open the original file, photo1.nef on the CD it opens with all the changes I've done previously for the file is saved in the photo1b.tif form (remember that this is the original file unchanged but not the file, I changed). But when you look at the pictures it seems to be the same version of the file. I closed photoshop and it deleted all my temporary files, and still, it opens the file with the changes, even if other programs open the file in its state of origin without any of my changes. How can I stop this? I think I can go nuts on it! Help! My wife is laughing at me when I show him.

  Looks like you may be using a cache for your Camera Raw settings (and not the XMP sidecar files).  Check your preferences in Camera Raw or make an edition > Camera Raw preferences of the bridge.

  You should be able to clear the changes by right-clicking on the image in Bridge and selecting parameters develop > clear settings.

  Only Adobe programs will use these changes by the way.  This is why open the file in other programs does not display them.

• I bought a second hand Mackbook air.  Despite the changes made in Icloud, accounts etc., appearing as the Macbook Air of continuous... (the name given by the former owner)  How can I change the name?

  I bought a second hand Macbook Air (early 2014, 128 GB SSD, Intel Core I5).  Despite all the changes in system preferences, he continues to wear the name assigned by the former owner (user).  How can I change the name of Macbook Air of... (my name)?

  Erase the Mac and reinstall OS X under your name.

• States of the changes by using the drop-down list box

  I have created a form with payment options in Adobe Flex. There will be 2 options of payment, cash and credit card. When a user selects an option it must fill in a few details. I created different States for the option of credit and card, which will appear as and when the option is selected. I'm not able to get the change to the State when an option is selected. Please help me in this regard.

  Try this:

  public function paymentState (): void
  {
  If (payment.selectedItem.label == 'Cash') {}
  currentState = "CashState";
  }
  Else if (payment.selectedItem.label == 'Credit Card') {}
  currentState = "CreditState";
  }
  Else if (payment.selectedItem.label == "Chèque") {}
  currentState = "ChequeState";
  }
  }

• link: new values on after the trigger by using dynamic sql.

  Hello all I have a problem I want to solve using dynamic sql on a trigger. The problem is that are around 5 qty fields who each have 18 separate fields. This is because of different sizes (S, M, L, XL, etc., up to 18). So I will try to use the: new values on a trigger to dynamically fill these information on a table, but immediate execution is run is returning the value like: new.open_sz (x) instead of the actual numeric value of the column. See code below. Is there a way to do this.
  
  Thank you in advance.
  
  
  CREATE OR REPLACE TRIGGER T_EXAMPLE
  after update of
  open_sz1, open_sz2, open_sz3, open_sz4, open_sz5, open_sz6,
  open_sz7, open_sz8, open_sz9, open_sz10, open_sz11, open_sz12,
  open_sz13, open_sz14, open_sz15, open_sz16, open_sz17, open_sz18
  on order_li_m for each line
  declare
  Is of TYPE NumArray table indexes number directory;
  NumArray v_orderqty;
  -TYPE VarArray is the table of the varchar2 (200) index directory.
  -v_orderqty K_A2KSTD. VarArray;
  v_col varchar2 (30);
  v_sql varchar2 (1000);
  BEGIN
  for a 1 in... 18 loop
  v_col: = ': new.open_sz' | one;
  v_sql: = ' SELECT: 1 double ';
  run immediately v_sql in v_orderqty (a) using v_col;
  dbms_output.put_line (v_orderqty (a));
  end loop;
  end T_EXAMPLE;
  /

  Raffy Martin wrote:
  Is there a way to do this.

  You may not use: news and: old identifiers in dynamic SQL, the way to do it is to specify the real column names.

• How to know the status of the process flow using a SQL query

  Hello
  I want to know the final status of a process flow after execution by using a sql query?
  
  The available entries are:
  -Item_Key
  -Process_Flow_Package_Name
  -Process_Flow_Name
  
  I ran the process flow using a WF_Engine.LaunchProcess ()procedure, but I was not able to know the status of the process flow.
  
  
  Is it possible to know the status of the process flow?
  
  using a procedure or an sql query?
  
  Thanks in advance,
  SriGP.

  Once the process is completed, or not, you can see the status by calling:

  UAS (your_OWF_shema) .wf_engine. ItemStatus()

• I had problems with e-mail and reset my Apple ID and password.  I can log into my account using the new ID but cannot update apps on my iPad.  The ID has not changed on the iPad.  How can I change my iPad ID to reflect the changes made to my account?

  I recently changed my email ID of iPad.  Change shows when I go online from Apple, but I can't update apps on my Mini, because the ID is still the old.  How change/modify my ID on my Mini?  Help!

  As long as you have changed e-mail address * location ID and the id not create a new ID - settings > iTunes & App Store > Apple ID (tap the ID that shows) > Sign Out. Then log in with the ID changed.

  What to do when you have changed your Apple ID email address or password - Apple support