Equium A60 - 191 wireless lan mini pci

Similar Questions

• T42p 11 a/b/g Wireless LAN Mini PCI adapt disappeared

  T42p (2373HVU) running XP Pro SP3. Following a recent Microsoft XP OS automatic update, unit a/b/g 11 disappeared from the list of network card (No 802.11 wireless Radio device is displayed using Fn + F5, only the Bluetooth device is accessible).

  When I replaced this OS updated with the original OS comes with the T42p (Fortunately, I mirrored the original hard drive and kept as a spare) device 11 a/b/g is present and I am able to access the 802.11 standard using Fn + F5. Therefore, I believe that the wireless LAN card is OK. Something happened during the MS update that killed the 802.11 device.

  Interesting to note that in the device under other devices Manager, I have a controller Ethernet figure even if there is no other device other that the Intel PRO/1000 MT Mobile connection under the network cards, which proved to work correctly.

  Any help would be appreciated.

  Welcome to the forum!

  After you download the driver, you have run the Setup file of C > drivers > win > Wlanath?

• Wireless LAN Mini PCI Card cannot connect to Orange Livebox

  Impossible to make a link to Orange Livebox, although it connects to Netgear ADSL Wireless router without problem. Technical support of orange gave and said "Contact Toshiba", but I can't find a phone number for them!
  RDK77

  Hello

  I put t know which model of laptop you have, but it will be interesting to know if the WLAN on your laptop works well with other WLAN routers to see if it's isolated WLAN issue or you have the general problem of WLAN with your device.

  Please give us more information. By the way: I put t know in which country you live but please visit http://eu.computers.toshiba-europe.com > Insights & information > Inside Toshiba > Contact Toshiba.

• Wireless Lan mini pci for Satellite 1900-UWN

  Can someone tell me if a PA3212u-4mpc card is compatible with a 1900 UWN. My manual says 1mpc, but I got the 4mpc, so I would use if possible.

  Hello Phil

  Please call the Toshiba authorized service partner in your country and ask them. They know what card WiFi is compatible with your device. In the compatibility list, I found just WiFi B bur card I can't tell you which card G will be FIR your unit.

  Good bye

• Tecra 9100 - W-LAN-Mini-PCI-card upgrade

  Hello everyone,

  I ve got a with the W-LAN-onboard Tecra 9100 working doesn´t.
  Instead of repairing the old W - Lan Mini-PCI-card I want to move to a new standard (802. 11 b / g with 108 Mbit/s max) Mini-PCI card.

  I prefer the mini Notebook-WLAN-Gigabyte GN-WIAG02 PCI adapter.

  Is it possible to chance the card built into the Gigabyte card?

  Hello

  It s nice that you want to upgrade your wireless mini-pci network card. But I suggest you rather a card with an Atheros chipset. The best choice is perhaps a card with a Chipset of Atheros 5005GS since I upgraded my Tecra 9100 with this card and it works like charm. (and not so expensive as other s cards)

  To swap the card, you must remove the plastic cover of the keyboard and unscrew the two screws in order to release the keyboard.
  After removing the keyboard, you will find an aluminum side cover left which is set with a special torx screws. The best would be to get these torx screwdriver to loosen this bolt and remove the cover.
  After removal, you will see the map with the cables that lead to the antenna. (One white and one black) Be very CAREFUL when remove the Connector cables, because if damage you one of the cable connectors there is no return since the cables are cables "Mini-coax" and cannot be "connected."

  I warn you, just do it if you're really sure and if you know what you're doing, because I won't take any responsibility if damage you something on your machine. Otherwise, I wish good luck and would appreciate some comments on your success.

  See you soon

• Satellite 1800-S-452nd wirelles LAN mini PCI card and WPA

  Hello

  I'm trying to upgrade Satellite S-1800-452nd wirelles LAN mini PCI card for WPA. Is there a solution?

  Best regards, Joze

  Hello

  You can change the settings in the properties of the wireless network.
  In the wireless tab, you can choose the network and press properties.
  There, it should be possible to set the wireless network key.

  In my opinion, if the card wireless doesn t support the WPA if you need other maps.

  Good bye

• Equium A60-191 - need a new recovery disk

  Hello. Anyone know where I can get a cd recovery Toshiba Equium A60-191-the one I was badly scratched and I need a new - can I download one on line?

  Any help would be greatly appreciated. Thank you
  Dee :-)

  The recovery disc can t be downloaded.

  If you need a new recovery disk, you need to ask your local ASP. They can order.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an authorized service provider

• Equium A60-191 - blue screen at startup

  Hello

  I have a laptop Equium A60-191. When I start it, I get a blue screen and it tries to re start it again. I started from my Windows CD and used the recovery console to fix the problem. He now works ok. However, the same thing that happened there are only 9 months.

  Has anyone seen this problem before?

  Thank you

  In my opinion, this kind of problem has thousands of PC users with all kinds of laptops and desktop PCs. really nothing exceptional and there is no reason that a why this happens.

  If now everything is Ok I see no reason to talk about this. Once again, if the same thing happen please report only and maybe we can discuss your problem.

  Bye and happy new year!

• The motherboard Equium A60 - 191 necessary UK provider

  About 8 months ago, I bought this toshiba Equium A60-191. I need another motherboard for it, everyone would be able to help because I can't seem to find suppliers for this. Cheers mark.

  Hello

  I think you should contact a Toshiba authorized service partner. They should be able to give you all the parts. You can find one here:
  https://EU.computers.Toshiba-Europe.com
  -Support & downloads - find an authorized service

  Good bye

• Equium A60-191: 'request could not be performed because of an i/o device error. "

  I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
  It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

  I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

  I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

  1. click on start
  2. right click on my computer
  3. Select manage from the menu that appears
  4. in the computer management window, select Device Manager
  5. in the right pane, click to expand IDE ATA/ATAPI controllers
  6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
  7. Select Properties
  8. in the Properties window, click the Advanced Settings tab
  9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
  10. click OK and exit all windows.

  If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

  Device 0: Primary IDE Channel
  Unit 1: Secondary IDE Channel

  Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

• Equium A60-191: upgrade graphic integrated processor

  Hi, new,

  I was wondering if I could spend my processor integrated switch to something better (anything!) I have a TOSHIBA Equium A60-191 with an ATI Mobility Radeon 7000 IGP.

  Thanks (please answer)
  Thanks again!
  Oh and thanks again!
  Suddste000

  Hello

  as far as I know, it is not possible to update the graphics card in a laptop.

  Good bye

• Equium A60-155 - Wireless is not lit

  Recently, I have an old Toshiba Equium EA60-155 off a friend for my nephew because he doesn't have a computer. It didn't work, but I would like to fix things.

  It was designed for XP and only has 768 MB of RAM, but works very well that now, I put XP back on except a problem. There were a couple of missing drivers, that I found and installed, BUT it doesn't have a wi - fi card.

  I plugged an old Wireless LAN CardBus PC Card and had the driver for it. Bulbs work on the map, and everything is OK in Device Manager. Even the Windows Wifi can capture my network.

  The problem is that the current Wi - fi does not seem to be on. Well the front light is not on. However, there is no power switch on this model.

  There is the Fn F8 button, BUT it seems to be the only Fn button that does nothing. I had to install a few other drivers for the other Hotkets, etc... at work, BUT I ran out of drivers to install.

  I guess that there must be a driver or a program that activates the key F8.

  Anyone has any ideas, I have searched high and low and most of the ideas for getting knowhere.

  Hello

  Until we start discussion here is the list of the old satellite facility.

  Windows XP Home Service Pack 2
  DirectX V9.0c (SP2)
  Driver Chipset + display + IDE ATI V6.14.10.6430
  Realtek RTL8139/810 x Family Fast Enthernet NIC Driver V5.6102.1125.2003
  Realtek AC 97 Audio Driver V5.10.00.5510
  CardBus PCI TI-1620 with UltraMedia controller pilot V1.0.0.9
  Synaptics pointing device driver V7.10.8
  SMSC IrCC driver V5.1.3600.3
  TOSHIBA Software Modem Driver (+ region Select utility) SM2138ALD04
  Driver LAN wireless (Atheros) 802. 11a / g g V3.1.2.12i112
  Wireless LAN Utility (Atheros) 802. 11a / g g V3.1.2.19i123
  TOSHIBA Hotkey Utility V1.00.12SA
  TOSHIBA Hotkey Utility for display V1.00.03SA
  Utilities TOSHIBA V1.00.10SA
  TOSHIBA Power Saver V7.03.04.I
  GST init V1.0.4.0
  TOSHIBA Console V3.04.00 for Osaka (SP2)
  ConfigFree V4.90.56
  TOSHIBA Speech System V1.00.1531
  TOSHIBA zooming Utility V2.0.0.18a
  TOSHIBA Touch and the launch of V1.2.4.1 for Osaka20
  TOSHIBA V3.05.0902 controls
  PC Diagnostic V3.0.6 tool
  Silent acoustic CD/DVD V1.00.005
  SRS WOW XT plug-in V1.0.2EN
  Driver DVD-RAM V3.1.0.0
  WinDVD V5.0B11.288 - SRS
  WinDVD Creator2 Platinum V2.0.14.310English2
  Sonic RecordNow! V7.22 Build720B36Y
  Sonic DLA V4.95 build 490B28B
  Toshiba SMBIOS ActiveX Control V1.3
  T.BIOS'CEO Driver V2.5USB1
  TOSHIBA Solutions V1.0

  This checklist and make sure that you have installed everything you can find on Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp (archive). some things you won't find on the download page, and it is not so important.

  Please post comments.
  > BUT it does not have a wi - fi card
  By the way: If there is no internal WLAN card FN + F8 functionality is not so important.

• Equium U400-145: Wireless LAN cannot be disabled

  Hello

  I can't turn off the LAN wireless with the switch or the Fn + F8 key. Although both are the indicator wireless LAN off (light in the front of the machine) the wireless LAN remains active.

  I tried to reinstall WLAN Driver and installed the last package of added value.

  Here is some detail on what I installed.

  Model name Satellite U400
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS V4.00
  Processor Intel (r) Pentium (r) Dual CPU T2390 1.86 GHz
  Physical memory 2048 MB RAM
  Network Marvell Yukon 88E8040T PCI - E Fast Ethernet Controller = 11.0.5.3 version = 00:1E:68:61:E4:8F MAC address
  Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network Adapter = 62.1181.1105.2009 version = 00:16:44:F1:54:92 MAC address

  Thank you.

  Hello

  This seems odd, that if you can not turn it off with the wlan switch, it may be a malfunction of the equipment. Have you tried to restore factory settings? Please, do it. If she doesn't fix it, there is hardware problem. I have never met such problems.

• Equium A60 - no wireless but I don't want to use WLan connection

  Hello

  I just bought a laptop Equium A60 without the installed adapter Atheros AR5001 wireless card.
  Do I need to buy this type of card adapter to run wireless or are there other models Atheros card I can use or would it be better to buy a usb wireless adapter.

  Thank you juan

  Hello

  You can purchase a USB WiFi key.
  These sticks are cheap and easy to use!

  If your Wlan router would support WLan 802. 11 B/G or N then I recommend buying a USB WLan stick that favourable two WiFi G and N standards
  802.11 N standard is the most recent and you would get the fastest connection using 802.11 N.

  But like I said; It depends on your WLan router

• Equium A60 - no wireless network connection

  Hello world

  I have had a good look through the forums and can't find anything related to this but my apologies if this has been addressed elsewhere :-)

  I set up a wireless home network with a Windows XP desktop computer with a router and a laptop old Win98, WinXP SP2, which I can't connect and an Equium A60. I installed two different network on the A60 USB adapters, seems to be okay with all of them except that there is no "wireless network connection" listed under network connections Control Panel. Both cards work fine on two other machines, so there must be a problem with the A60. I installed an adapter and then uninstalled before trying another.

  Under control-> connections Panel Network, I can see an old broadband connection and the connection to the Local network (which is allowing me to connect to the router via Ethernet, so that the router will work), but the wireless network connection icon is not there. The driver for the USB adapter makes its appearance in Device Manager and is reported as working properly, but if it worked correctly then (I think) a wireless connection icon should appear - it happened with my other WinXP desktop.

  Any ideas of what could be the cause?

  Thanks in advance
  Gareth

  Post edited by: g_shaw - added a few details

  Hello

  I guess that the external WLan USB stick has been recognized one installed correctly. You said it appears in Device Manager. Are you sure that the WLAN USB key has been recognized to 101%? !!

  If the WLAN USB key is recognized correctly, check the properties of this stick. (I think you should right click and then click on properties).

  But if the stick was not recognized, you must verify the properties of the single USB ports and power safe mode.
  Choose the USB single root hubs in device, right click, properties, tab power management Manager and disable the option called allow the computer to turn off the device to save energy.

  So maybe it helps