Problem child file the end of screen

Hello world

I am creating an android application for my corusework of the University and it is based on the set of alien spaceships as they fly from the right side of the screen. When my gun is shot enough times, the game should proceed to the end screen, the problem is that I have to remove the exotic bullets as the game ends. However, I get an error of a property not set. Here is the code for my main timeline:

import flash.events.MouseEvent;
import flash.events.Event;
import flash.display.MovieClip;


//gun control
var upButtonIsDown:Boolean;
var downButtonIsDown:Boolean;
var livesLost:Number = 0;
stop();


btn_up.addEventListener(MouseEvent.MOUSE_DOWN,upDown);
btn_down.addEventListener(MouseEvent.MOUSE_DOWN,downDown);
btn_up.addEventListener(MouseEvent.MOUSE_UP,upUp);
btn_down.addEventListener(MouseEvent.MOUSE_UP,downUp);


//bg 
var bgButtonIsDown:Boolean;
bg.addEventListener(MouseEvent.MOUSE_UP,upUp);
bg.addEventListener (MouseEvent.MOUSE_UP,downUp);


stage.addEventListener(Event.ENTER_FRAME,pulse);


function pulse(evt:Event)
{
          if (currentFrame!=2) return;
          if (upButtonIsDown) mc_gun.y-=5;
          if (downButtonIsDown) mc_gun.y+=5;
          checkforHits();
}
function checkforHits()
{
          for (var i:Number=0;i<numChildren;i++)
{
                               if (getChildAt  is alienbullet)
                               {
                                         var ab:alienbullet = alienbullet (getChildAt (i));
                                         if (mc_gun.hitTestObject(ab) && ab.currentFrame==1)
                                         {
                                                   mc_gun.gotoAndStop(mc_gun.currentFrame+1);
                                                   ab.gotoAndStop(2);
                                                   livesLost++;
                                                   if (livesLost>3) endGame();
                                                   return;
                                         }
                               }
                     }
}


function endGame()


{
          for (var i:Number=numChildren-1;i>=0;i--)
          {
                    if (getChildAt(i) is alienbullet)
                    {
                              var ab:alienbullet = alienbullet(getChildAt(i));
                              ab.killMe();
                    }
          }
          gotoAndStop(21);
}






function upDown (evt:MouseEvent)
{
          upButtonIsDown=true;
}


function downDown (evt:MouseEvent)
{
          downButtonIsDown=true;
}


function upUp (evt:MouseEvent)
{
          upButtonIsDown=false;
}


function downUp (evt:MouseEvent)
{
          downButtonIsDown=false;
}


//shoot code
mc_gun.addEventListener(MouseEvent.MOUSE_DOWN,shoot);
stage,addEventListener(Event.ENTER_FRAME,alienhit);


var bulletArray:Array = new Array();
bulletArray.push(mc_bullet1);
bulletArray.push(mc_bullet2);
bulletArray.push(mc_bullet3);
bulletArray.push(mc_bullet4);
bulletArray.push(mc_bullet5);
bulletArray.push(mc_bullet6);


var bulletCounter:Number = 0;


function alienhit(evt:Event)
{
          for (var i:Number=0;i<bulletArray.length;i++)
                     {
                              if (mc_alienA1.hitTestObject(bulletArray[i])) trace("alienA1 has been hit" +i);
                              if (mc_alienA2.hitTestObject(bulletArray[i])) trace("alienA2 has been hit" +i);
                              if (mc_alienA3.hitTestObject(bulletArray[i])) trace("alienA3 has been hit" +i);
                     }
}


function shoot(evt:MouseEvent)
{
          if (bulletCounter<5) bulletCounter++;
          else bulletCounter=0;

          shootmc(bulletArray[bulletCounter]);
}


function shootmc(mc:MovieClip)
{
          mc.visible=true;
          mc.x = mc_gun.x;
          mc.y = mc_gun.y;
          mc.gotoAndPlay(2);
}

Now the function of end of part is supposed to call on this code which is in the package file (script for foreigners)

public void killMe()

{

this.removeEventListener(Event.ENTER_FRAME,pulse);

parent.removeChild (this);

}

complete script:

package 
{


          import flash.display.MovieClip;
          import flash.events.Event;




          public class alien1 extends MovieClip
          {


                    var yMin = 0;
                    var yMax = stage.stageHeight;
                    var yInc = 10;


                    var maxPulses= Math.round(yMax/yInc);
                    var changeDirectionAt = Math.round(Math.random() * maxPulses);
                    var pulseCount = 0;

                    var fireCount=0;
                    var fireAt = Math.round(Math.random() * maxPulses);



                    public function alien1()
                    {
                              this.addEventListener(Event.ENTER_FRAME,apulse);
                    }


                    function apulse(evt:Event)
                    {
                              pulseCount++;
                              fireCount++;
                              if (pulseCount>=changeDirectionAt)
                              {
                                        yInc *=  -1;
                                        pulseCount = 0;
                                        changeDirectionAt = Math.round(Math.random() * maxPulses);
                                        return;
                              }

                              if (fireCount>=fireAt)
                              {
                                        var bullet:alienbullet = new alienbullet();
                                        bullet.x = this.x;
                                        bullet.y = this.y;
                                        parent.addChild(bullet);
                                        fireCount=0;
                                        fireAt = Math.round(Math.random() * maxPulses);

                              }


                              this.y +=  yInc;
                              if (this.y <= yMin)
                              {
                                        yInc *=  -1;
                              }
                              if (this.y >= yMax)
                              {
                                        yInc *=  -1;
                              }

                              public function killMe()
                              {
                                        this.removeEventListener(Event.ENTER_FRAME,pulse);
                                        parent.removeChild(this);
                              }

                    }
          }


}

Would appreciate any help! Thank you

you not remove bullets Aliens in killMe().  you remove the alien1 instance.

Tags: Adobe Animate

Similar Questions

  • Chart display problems - cut off the end or shows not all values

    I have a file I/O reads database table where I can choose a date range to view history, and I can't seem to format correctly.

    If I set the width of the graph large enough to show all values, it cuts the right part.

    Width 1200, the value date of end 10/01/2014, shows only until September 24:

    fileio.jpg

    Width set at 1700, will now interrupt the rightmost in the values:

    fileio1.jpg

    Obviously, I want the best of both worlds - when the date range is selected, it shows all the values and fits in the chart area.

    Any ideas?

    Create a diagram with scrolling.

    Under the item add something like:

  • Running the thread of the child until the end even after that the main thread is terminated

    I run a background task by using the task and the Service Api. When the main application creates little son, the main thread can be terminated without completing the child thread. Is this possible. Thank you.

    Find out about the son of the devil.

    Multithreading - what is Daemon thread in java - Stack Overflow

    Read also the

    Application section of the lifecycle in the javadoc.

  • scrolling the fonts problem (goes at the end of the list)

    Hello!

    I have a text selection and I cross the fonts by hitting the down arrow in the "character:" in the drop-down list. What happens is when I met a police who, for some reason, is not one the name displayed in the text box, the current selection down fo the list of fonts.

    no idea why this is happening and if it can be solved somehow?

    Thanks for reading

    I can't fully explain the reasoning behind why it works the way it does, but I'm almost certain that you can fix this by opening your Type preferences (section Type pref.) and uncheck 'enable missing glyph Protection '.

  • You can save a broken computer? My computer does NOT start after the blue hp screen.

    In the past months, my computer has been the object of a freezing randomly, and Ctrl + Alt + Delete does not work. I stopped him via the power button. Sometimes, when I start it again, the computer moniter shows nothing but a black screen and the computer sounds different when it starts normally. When this happens, I turn it off again hit the left side of the desktop and turn on again. Whenever I do this, the computer starts normally, and I go on the computer use.

    Yesterday morning, after a break of 2 days, acess my computer and it is random freezing thing once again. I force close down as one normally do, and the computer does not start and displays the same black screen and the same fan/air weird sound. I stopped him and I hit the side RIGHT this time, I think and when I turn on the computer, the usual blue HP screen appears with the establishment, boot, diagnostics and system recovery things. HOWEVER, after this screen, a black screen will appear with this weird blue symbol on the upper left corner, I have never seen this and it looks like a circle with a triangle and a Pentagon below and it remains essentially on this screen forever. When I try to hit the establishment, boot, diagnostics and the shortcuts to system recovery, on the lower left side of the screen, it says "Menu boot loading...". ' or whatever the shortcut of loading represents, but nothing ever happens. When I press the other keys, this tapping noise comes from the computer at each tap of the keyboard.

    I have no idea what to do, and at this point, my first priority is to save important files on the computer. Does anyone know what is the problem? I want her more than a problem of system rather than a virus problem because refusing the boot black screen thing lasts for years. My computer is 3-4 years. I enclose a sketch of what looks like the weird symbol.

    MY COMPUTER WORKS NOW!

    With the flash drive, I was able to access the BIOS, which before, I couldn't.

    Eventually my computer was in some strange sort of lockdown setting, I switched it back to activate and now its work! I remember save important things in the future. Thank you very much for your help!

  • Music in windows media player will stop playing at the end of the song

    Original title: at the end of the songs sound problem

    When playing music in windows media player there are a couple of secpnds of silence at the end of each file-music

    Hi ccjerry,

    1 when was the last time it was working fine?

    2. did you of recent changes on the computer?

    If the music in your library skips or the audio breaks up when you play in Windows Media Player, it might be a problem with the sound driver installed on your computer. In general, this type of problem occurs towards the end of the songs (in the last 20 seconds or almost).

    In some cases, you can work around the problem by disabling optional speaker effects that are collectively known asimprovements. If the disabling effects speaker resolves the problem, you may need to update your audio driver.

    (a) Sound open by clicking on the Start button and then clicking Control Panel. In the search box, type sound, and then click sound.

    (b) on the playback tab, click speakers, and then click Properties.

    (c) click the enhancements tab, and then select the checkbox disable all improvements .

    If you do not see the enhancements tab in the speakers properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

    If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.

    How can I stop my music skip or break down when I play?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.

    Last month, I had a series of blue screens.  The problem points to the files Volsnap.sys or Classpnp.sys.

    I have a Dell Precision T3500, running 64-bit Windows 7 Prof.  The system is configured with RAID.

    Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that.  It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.

    No idea on how to stop this would be really appreciated!  Thank you

    Hello

    Results verified BlueScreenView WinDBG / DumpCHK.

    TrendMicro is most likely part of this question, as it is known to have caused or
    make these problems worse. Uninstall it and run the removal tool to prevent
    remains of troublecausing. The following recommendations to use during the test,
    even better all the time.

    TrendMicro removal tool
    http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

    List of tools to clean/uninstall anti-malware programs
    http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

    ------------------------------------------------------------

    Here's what I use and recommend: (these are all free and very effective versions.)

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
    Operation of the network.

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Two versions of Avast are available 6.x and 4.8 x

    Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
    and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
    Finish those you don't use).
    http://www.avast.com/free-antivirus-download#TAB4

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
    or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.

    http://www.Malwarebytes.org/

    ==========================================================

    The Bug_Checks were D1 (19 long happened if he should really
    do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
    Components of Windows, which means something else led in error.

    1. Uninstall TrendMicro as it has a role - is not enough to just disable
    such that it will still load chunks of itself in memory.

    2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
    or other corruption could be at stake. Classpnp.sys is the SCSI class system
    dll checking and disk problems will affect the it. Run SFC/scannow, and then
    Checkdisk (chkdsk /f r).

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    =========================================================

    Other troubleshooting methods:

    BCCode: D1 0x000000D1

    Check these KB

    Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
    from sleep or standby extended: "STOP: 0x000000D1".
    http://support.Microsoft.com/kb/978982

    Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
    system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
    http://support.Microsoft.com/kb/2320550

    Those 7 other KB Articles are available
    http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

    --------------------------------------------------

    Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
    methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
    programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
    If necessary.

    Cause

    A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

    This bug check is usually caused by drivers who used a wrong address.

    If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

    • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
    • The function call was made to a function in another pilot, and that this driver has been unloaded.
    • The function was called by using a function pointer that was an invalid pointer.

    BCCode: d1 0x000000d1<-- read="" this="">
    * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

  • Dropped audio at the end of one. File VOB (problem with the import. VOBs, I guess)

    Here's what I did. I created several DVDs by recording VHS videos for them. I copied these DVD on my PC, giving me dozens of DVD files with. VOB files in them. I imported the. VOB files for each DVD in Premiere Pro sequences, but still get (which means that every time) dropped audio since the last images of each. VOB file in the sequence. So, in between all of them. VOB file in a video DVD full, there is a very brief break in audio. To be exact, the audio is 'cut' last 13 executives of each. VOB. However, the start of the next. VOB in the sequence begins with the audio as it should (at the very 1st picture). Video is not cut at the end of each. VOB and usually the transitions in the next. VOB smoothly, with no problems. However, occasionally, the latest image of one. VOB looks "glitched" (imagine two sequential images overlapping each other, but within a framework... so that you can see two of the same person who overlap who move from the 1st to the 2nd section). When this happens, the start of the next. VOB file in the sequence is largely pixelated for the first 2 or 3 images.

    I guess it's a problem with the import of first Pro CC. VOB files (she just can't handle.) VOBs). I would like to know if anyone has had a similar problem, and if you have found a solution.

    It is a long-standing problem.  Here's my work around.

    http://www.videohelp.com/software/XviD4PSP

    (Download version 5, not 7.)

  • I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen

    I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen randomly with the screen turned on (I mean everything is black and I can't see a thing, but can still see the light of the LCD screen). This often happens when I open/close a window, browsers web example, the records, or even during the boot. I want to know how to solve this problem and if the upgrade to Windows 10 works for her.

    Hi Haolin,

    Thanks for posting your query in Microsoft Community.

    I do not understand that the screen goes black randomly, and I'll be happy to answer your query. Let me ask you;

    • What is the brand and model of the computer?
    • Remember to no particular change in the computer before the show?
    • When was the last time it worked?

    Video card problems are the most common cause of this problem.

    Try the following troubleshooting procedures in the order. If the steps described in the first procedure does not resolve the problem, continue to the next procedure.

    Step 1: Reinstall your video driver

    1. Right click on the bar tasks and then click Start Task Manager.

    2. Click on the processes tab, click explorer.exe, and then click end process.

    3. Click file, and then click new task (run).

    4. In the text box open, type explorer.exe, and then click OK.

    5. Click on the Start button , go into the Device Manager in the start search box, and then, in the search results, click on the peripheral Manager.

    6. Double-click on display the cards, right click the display device, click Update driver software, and then follow the steps in the wizard that appears. You can also visit the website of the manufacturer of the computer support and install the latest available graphics cards for the same model of computer you have.

    Note: After the driver is re-installed, you may need to restart your computer to complete the installation. You may also need to adjust the resolution of the display to its previous value. For more information, see change your screen resolution.

    Step 2: Search for registry problems

    1. Right click on the bar tasks and then click Start Task Manager.

    2. Click on the processes tab, click explorer.exe, and then click end process.

    3. Click fileand then click new task (run)

      In the text box open, type explorer.exe, and then click OK.

    4. Click on the Start button , type regedit in the search box, and then, in the search results, click on regedit.exe.

    5. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

    6. Click to select the WinLogon key and then in the right pane, click on Shell. The value of shell in the data column must be explorer.exe. If the value of Shell is not explorer.exe, double-click Shell, and then, in the value data text box, type explorer.exe, and then click OK.

    7. Close the registry editor and restart your PC.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

    If this procedure resolves the issue, you are finished. If this is not the case, proceed to the next set of steps.

    Step 3: Start the computer in safe mode and run system restore

    1. Click on the Start button , click the arrow next to Shut Down, and then click restart.

    2. Do one of the following:

      • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

      • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

    3. In the Advanced Boot Options screen, use the arrow keys to select Safe Mode, and then press enter.

    4. Log your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

    5. Click on the Start button , type "System Restore" in the search box, click System Restore, and then click Next. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    6. Choose a restore point when your PC worked as expected, click Next, and then click Finish.

    7. Restart your computer normally.

    Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

    If these steps resolve the issue, you are finished. If not, try to repeat the steps and chooses an older restore point (if available). If that does not resolve the problem, contact your computer manufacturer or the technical support for further assistance.

  • How to remove .oam file in Muse after the end of the animation?

    I recently searched this forum and answer to some than others and I can not find how to solve my problem. All similar topics are still 'unsolved', often left unanswered. I made contact with the authors of this topics, but they cannot always solve this puzzle.

    I create my Web site in Adobe Muse and leading edge. I want an intro animated beginning (when it is loading for the first time), and if it is possible - in a full screen mode. After the end of the animation, I want it to disappear and reveal the content of the site, which should be clickable. It would be the best if the animation could be created as animate, but if there is no other choice, it can be gif or mp4.


    Here is an example of Web site and my problem.

    Link: http://problem.bplaced.net/

    I tried to solve my problem of all the ways that I know. After the end of the animation and transformation to the alpha 0, it is still covering the menu and making it unclickabe. After that, I tried to put in the edge layers animate in stop mode after the end of the animation. I also tried to minimalize the scene at the end of full hd 1 x 1 px. I tried all methods do not work.

    And this is ZIP that contains the whole of the site. Muse and edge file.

    Link: http://problem.bplaced.net/download/full_site_muse_and_edge.zip

    My knowledge of programming, it's just basic Basic, a down-to-Earth answers please.

    To the moderators:

    If by chance somewhere in this forum you can find answer to my question, please don't brand just my problem "solved" with no response to the left. If you know the answer, please give it to me. Marking of the subject as "resolved" does not at all help.

    Thank you!

    Hi Michal,

    Have you tried selecting display: no at the end of the animation?

    Kind regards

    Akshay

  • Problem with remove the child to

    I have an empty clip that contains text and media for executives in a lesson called content_mc

    I load dynamically in a text box and then other things such as graphics, videos and other swf files...

    before you begin to insert swf files, it worked very well, but it was just the text on the screen, now that I have other media, it removes "randomly" children and I can't understand why it's what I use:

    for (var c:uint = 0; c < content_mc.numChildren; c ++) {}
    trace (c + ":" + content_mc.getChildAt (c) .name);
    content_mc.removeChildAt (c);
    }

    Anyone know what is happening?

    Figured it out!

    OK, for those of you who want the answer to this, but don't want to pay for it...

    I realized that when you use the removeChildAt() she removes the child of the index number... so the way I did it was like this:

    for (var c:uint = 0; c
    trace ("-" + content_mc.getChildAt (c) .name + "(" + c + "')");
    content_mc.removeChildAt (c);

    doing this, he was first to remove the child at index 0. and what made flash NOW are "slides" down an index... so the element that was at index 1 is now 0, the element at index 2 is now 1, etc... so when I arrived at the last, it would not remove it because it was no longer there...

    but change to it (instead of using the variable c, you have just put 0 in the index box):
    for (var c:uint = 0; c
    trace ("-" + content_mc.getChildAt (0) .name + "(" + c + "')");
    content_mc.removeChildAt (0);

    solved the problem :)

  • Some files never end the backup on my Mac

    There are some files in my iCloud that never end to be saved on my Mac. It is not a connection problem.

    The bar that indicates the amount of data that is downloaded almost done and start again.

    The problem is that the new files in the iCloud never start to download.

    Thread on the similar theme that might be able to help your question- not my backup will accomplish

  • Problems with the option full screen

    I am able to use the option full screen, but it is really not full-screen. It fills just around the top of the window, I am in. I see again my tabs open and menu bar and it's really annoying. I was wondering how to solve this problem. I would like to upload a screenshot, but apparently there is a size limit for images.

    Try to rename (or delete) the file xulstore.json in the Firefox profile folder.

    You can use this button to go to the Firefox profile folder currently in use:

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

  • HELP - read file that VI does not stop at the end of the WAV file

    Hello

    I am a beginner and I'm working on a project that opens a .wav file and it plays (with volume control). I found all the associated examples sounds extremely useful and I can just edit the audio file to output.vi his example to my project.

    I'm running into a problem where the vi does not stop at the end of the wav file, and it seems for a while loop. the wav file I am using ended a long min (and it has been converted to a data file in a wav file, if it matters). I have attached my vi modified here and appreciate any help.

    Thank you!

    Christy

    The OP and the æ OR

    Please go to help on the toolbar. Then select examples and search for sound. Locate the sound file "for his Output.vi.

  • Text added in loop file adds the value of delimiter unwanted at the end of each iteration.

    I use 'Export to Spreadsheet.vi' in a loop that records a text file and adds data to a waveform table 1 d for each iteration. My problem is that, at the end of each iteration of what an extra delimiter value is added to the file. When I then try to graph my data, I get the holes, as shown below (circled in black).

    When I start to analyze the data, I'm sure it will be a nuisance. I can't find a solution to this problem. Any advice would be greatly appreciated.

    Thank you.

    Any wire TRUE here

Maybe you are looking for