scrolling the fonts problem (goes at the end of the list)

Similar Questions

• Scroll the list of QNX

  Hello

  I study the QNX components to check/improve the performance of my Spark App (this is for background).

  So I try to use the list scrollToIndex method in order to view a new item added to the list:

  myList.scrollToIndex (newIndex);

  But it does not for the moment... I have no animation, and the new item is not in sight.

  (I check the using element status: myList.getIsCellVisibleAtIndex (newIndex))

  Does he know how to use this method in order to have an animation of the list smotth?

  Finally work!

  Short story: I was preparing a BUG report, my sample did not work as expected and suddenly after set/reset some settings, the list scrolls smoothly like a charm!

  So I do not know what is / was the problem, but I could apply a workaround using a fake timer (1ms is sufficient), in order to give sufficient time for the Tweener to 'know' the new content list:

  -updated dataprovider

  -wait (1ms)

  -invoke scrollToIndex()

  (I don't like to use the timer to random "wait" but... works great here)

  I don't know if it will work for all cases, I still don't know if it's a bug, or if it's the way I use QNX list inside a spark (by using QContainer of Renaun) project, but the workaround is easy and the result is very nice (as expected!) (Thanks to the QNX library).

• Detect when stop user to scroll the list of the spark

  Hello.

  I have a spark list component mwith a horizontal provision, which I use to display a slideshow of images.

  The user can scroll the slides by clicking on the two buttons or by dragging them on the list (the project is mobile, but it will be also exported as air project).

  I need the slides is perfectly centered in the viewport (the list and each slide is 1024px width) and I want to avoid that two slides are partly shown.

  It is quite easy to achieve when I scroll with the buttons, because I always scroll in 1024px in time.

  Things become more difficult when the user makes a scrolling by dragging on the list (by performing a drag of the classic mouse, but also a gesture of shot on the mobile device), because it could leave the list in an 'intermediary' State in which the two blades are partially displayed.

  What I would like to know if there is some kind of event that is triggered when the user ceases to scroll, and then read the position of the roll so I can decide how to scroll to display only a single slide.

  do you know if there is such an event?

  Thanks in advance!

  Best regards

  Luca

  I think that you might be looking for touchInteractionEnd that is raised after the scroll animation is complete (http://opensource.adobe.com/wiki/display/flexsdk/Mobile+List%2C+Scroller+and+Touch)

• Navigate the list fonts causes the Muse crashing

  Just started using Muse today. Whenever I scroll the list of fonts to change the single line of type in the header of the page master, Muse crashes. No alert window opens just the standard dialog Apple asking if I want to send a report to Apple. OS X 10.8.3, 3.4 GHz Intel Core i7 iMac, 32 GB 1600 MHz DDR3. Help! In case it helps, I just tried creating a file - a master, a single page. I created a text box, typed in the word "dog", and then scrolls through the list of fonts. As soon as I hit 'Courier', there is no other fonts listed, and that's when Muse crashes. It happened three times in a row.

  The problem is solved thanks to Zak Williamson. He wrote: ' we expect there is a specific font on your computer that is installed as a police Type 1 in/Library/Fonts and OpenType font in ~/Library/Fonts and it's confusing Muse (which does not support Type 1 fonts).»

  The offending police proved 'Courier FInal Draft' since the application of the Final draft Screenwriting. Once I removed that it draws from the police, Muse stopped crashing.

  Thanks a lot for the quick response!

• How to use touch gesture to scroll the ObjectListField in a VerticalFieldManager?

  My subclass of ObjectListField is added to a VerticalFieldManager. On a trackball device elements scroll upward and down fine.

  However, on a storm (touchscreen device), the list does not scroll when you move your finger upward or toward the bottom of the screen. How scroll the list vertically on a storm? Thank you.

  Found the problem...

  Trying to develop for touch and non touch, I got a subclass of the screen which was the touchEvent() substitution.

• How to load the list when running

  hiiiiii I have total 100 events list...

  But first, I have 20 events display when I scroll the list down when I reached 20 events th I load another 20 events to the list please give me suggestions to do this to me...

  If you have all 100 items available then you should put all the entries in the ListField.

  In situations when not all are available and you must get them (from a server), a little at a time, then you might have a 'Next' button and allows to do the treatment.  Without doubt, you also need a 'Back' button  I wouldn't try to drive it when the user scrolls to the end of the list.  Because there is a long delay, get the 'next page', I think that instead of using a user interface there different - people expect a scroll to be instant.

• Unwanted scrollbar in the list Itemrenderer. Help, please!

  I created a list with the variableRowHeight and wordWrap, both the value 'true '.

  The output looks very good. But the problem came when I scroll the list with the mouse to scroll ( NOT by dragging the scroll bar).

  Take this list I found on the internet (http://blog.flexexamples.com/wp-content/uploads/Tree_variableRowHeight_test/bin/main.html) for example.

  First, I opened the folder "Para 4" and rollovered
   the mouse to the list item "Morbi tincidunt, sapien in sollicitudin.....".
  

  

  Then scroll the mouse-scroll, and the following result would happened:
  
  

  The first line in the listItem has disappeared!

  Looks like it's a bug, and I don't know how to solve this problem.

  The listItem scrolling as well as my list, which is quite strange for me and my users.

  This is a really serious problem for me! Help, please!

  Thank you.

  Make sure the renderer textfield is large enough to prevent the text scrolling

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Loading data into the list when necessary

  HI all,

  I'm a huge display of data from database in the list,

  I do not want to load all the data in one shot, I want to show also responsible, means (if the user scroll the list automatically loads the data from my db?)

  any ideas?

  Thank you

  You will need to check whether sqlite supports offsets and limits.

  http://www.SQL.org/SQL-database/PostgreSQL/manual/queries-limit.html

• The list with many images

  Hello!

  I have a list with a lot of images in the itemRenderer, over 500.

  I use virtualization on this list.

  When people scroll quickly down, it can take a bit to load images.

  Issues related to the:

  1. in what order the list control to load images? Up and down the entire list or Topp down only the visible part?

  2. is there anyway I can give priority to a certain image to load first on others? The images have the source property set to a relative path on the server.

  3. is there anything I can do to speed up the process of loading in general?

  Thank you!

  The list does not load images, because of your item converter.  I suppose you load these images by substituting the data setter method in the rendering engine.

  When the list of the first loads it creates just enough converters to show what is in view (due to virtualization), let the top 10 items.  This means that the first 10 images will be loaded, but no other images will be loaded unless you scroll the list to expose new items.  If you want to have some images available before others so you can have your application load them if its not busy and in this way, they could be available before the user scrolls.

  Even if you were to load all images before creating the list you might seem still some flickering when scrolling because what are they are recharged in as user autour scrolls.  To remedy this, you might want to consider caching the images as they are loaded, there is an example here: http://flexponential.com/2010/01/10/caching-images-loaded-from-a-spark-item-renderer/

• My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he

  My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he said that it "unexpected." Really irritating - ideas?

  Your options are:

  -try to make it work (could take a few hours and may does not always work)

  -get the CS6 (has problems as well, but works a little better)

  -get CC

  -install a virtual machine with an older system (10.6 or 10.8)

  -Check if your Mac is not as new as you think and you can still run Yosemite (also has problems, but perhaps not as much)

• Impossible to scroll through the list of fonts in InDesign (stuck on the list of Document only)

  Hello

  It is my first time ever poster and if I posted in the wrong place or wrong I apologize.

  Just recently, my InDesign (CS6) met a problem scroll through fonts in the drop down menu on the Panel. I always just selected (highlighted) text in the document and then to scroll upwards / downwards in the box the name of the font so that it should scroll each cast. Of course, this would result in being able to get a glimpse of what my selected text would look like in each font that I scrolled. Well now, all of a sudden I can only scroll my document only fonts (which are at the top of my list of fonts). He basically just guard cycling through the list like 5 fonts over and over. He won't go past the last document only melting in the list. If I click on a font not in my paper now and start to scroll from there he still jumps in my fonts only document. Any idea on what could be the cause? Any help would be greatly appreciated.

  Thank you

  Heather

  Try to restore your InDesign preferences:

  Garbage, replace, reset or restore the application's preferences

• List of 4 000 fonts? do not scroll to the list

  I have a library of over 4 000 fonts that to, I have accumulated over the years... I used to write a Word and scroll with my keyboard to the bottom of all fonts starting with the first and cancelling combinations which interest me.  With CS5, that I can't my list to scroll all the way, he go through a few and then find a font that looks like _ (white) and then automatically go at the bottom of the list. I tried from my research around leter D and scroll down but then again even problem.  My photoshop cs3 does not, it allows me to see myself as I could scroll in photoshop, then individually scroll with my mouse and choose the same font, but which is very counterproductive.  I rechecked my library of fonts in my windows Explorer and everything looks... 4 005 to be exact... Why Illustrator 5 do that?  Does anyone know a way around this?  Is this just a bug with the new CS5?  Everyone has the same problems?

  Very annoyed Designer

  Not sure, but certainly with CS4 CS5 you need to uncheck "Enable missing glyph Protection" (Edit > Preferences > Type) to overcome the problem that you are experiencing. You really need a font however Manager.

• Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the arear connection is at the top. Virtually all nearthe fields are dead. I have no problem going into the fields to halfway to the bottom of the screen. Chrome w

  Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the login box is at the top. Virtually all of the fields near the top are dead. I have no problem going into the fields to halfway to the bottom of the screen. It comes to Chrome and it works very well.

  I suggest you only begin by taking the measures recommended in this support article.

• Anyone know why fonts be suddenly appear down to the bottom of the box unless I actually scroll the menu and leave it highlighted?

  Anyone know why fonts be suddenly appear down to the bottom of the box unless I actually scroll the menu and leave it highlighted?

  darlagore,

  I think that it can fix:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

• In YouTube, I hurt very often changing update of video to the page (so that I can scroll the space/arrows). Is it possible to fix this?

  As indicated, I go to a video, and if I try to click out of it so I can use my keyboard to instead scroll through the page, it seems rather capricious being on what allows it to happen. I'm going to click on the page itself, use the scroll bar, nothing. Sometimes it works and I can use the keyboard to navigate. Sometimes it doesn't, and no matter what I do, update will not come out of the video.

  I never had this problem when you use YT on Firefox (previously used Chrome and Opera). Any ideas what is causing it or what I can do about it?

  In recent years, users noticed that the YouTube Flash Player has been particularly "sticky" or tenacious when he came in order to grasp the keyboard focus.

  The last time that I looked into it, a year ago, I posted this summary of the workarounds mentioned above:

  (1) full-screen video and then come back

  press f, then Esc - focus will return to the page

  (2) switch to another window of the application, then again

  Press Alt + tab and Alt + tab - focus will return to the page

  (3) click on a different tab, then click on back - focus will return to the page

  Some users have also reported that the YouTube Player behaves normally (i.e., by clicking on the page control) If you disable safe_mode plugin Flash Player functionality. There is now a hidden for this preference:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste the flash and make a pause so that the list is filtered

  (C) double-click the preference dom.ipc.plugins.flash.disable - protected mode to change its value from false to true.

  It cannot take effect until all the Flash was discharged for a few minutes, or you close Firefox.