Problem child removal

Similar Questions

• I use LR CC on MAC OS-problem with removal of Spot, it is note all points but does not change things?

  I use LR CC on MAC OS-problem with removal of Spot, it is note all points but does not change things?

  Hi bakhytz,

  Could you please check if the opacity is set to the maximum value and feather is set to a lower value in your spotting tool parameters.

• Problem with Remove-VDSwitchVMHost

  Hi guys,.

  First of all... Here's the PowerCLI version I use:

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.1 Release 2 build 1012425

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.1 build 768137

  VMWare ImageBuilder PowerCLI component 5.1 build 768137

  License of VMware PowerCLI component 5.1 build 669840

  VDS's VMware PowerCLI component 5.1 build 1012428

  VMware vSphere PowerCLI component 5.1 build 1012428

  I'm having a problem with Remove-VDSwitchVMHost which is a bit frustrating. I have a script that I use to rebuild hosts in my environment when we upgrade versions. I recently changed my vDS switches. When the host is rebuilt, there is a phantom entry in the vDS for the old server. For some reason, I can't remove it with Remove-VDSwitchVMHost.

  

  The two hosts in this group appear in the GUI. Esxt21 is the server, I just rebuilt and added to the vCenter.

  When you go through PowerCLI, it presents different information:

  

  When I get home: get-vmhost $vmhost | Get-VDSwitch nothing is returned. If I list the switch first, then get-vmhost, it shows data:

  

  Get-VDSwitch $vDSName | get-vmhost $vmhost | Delete-VDSwitchVMHost does not seem to work either.

  I can delete the host via the interface graphics, but which goes against the idea of a script

  Someone had a bit of luck with this?

  Thank you

  Dan

  Got, it works now! Here's the code to work:

  $vmhost = "myhostname".

  $vDSName = "myvdsname".

  $vmhostid = (get-vmhost $vmhost) .extensiondata. Moref.Value
  $vDS = (get-VDSwitch $vDSName)
  $vDSView = get-view-Id $vDS.id
  $vDSView.UpdateViewData)

  # - ReconfigureDvs_Task -
  $spec = new-Object VMware.Vim.DVSConfigSpec
  $spec.configVersion = $vDSView.Config.ConfigVersion
  $spec.host = new-Object VMware.Vim.DistributedVirtualSwitchHostMemberConfigSpec [] (1)
  $spec.host [0] = new-Object VMware.Vim.DistributedVirtualSwitchHostMemberConfigSpec
  $spec.host [0] .operation = 'delete '.
  $spec.host [0] .host = new-Object VMware.Vim.ManagedObjectReference
  $spec.host [0].host.type = "HostSystem.
  $spec.host [0] .host. Value = $vmhostid
  _this $ get-view-Id = $vDS.id
  _this $. ReconfigureDvs_Task ($spec)

  Thanks for your help!

• Problem while removing customizations

  Hello
  
  I am facing a problem when removing the Extensions in iRecruitment
  
  According to customer's requirement I extended the VO seeded ExtendedVO1
  
  seeded VO [oracle/apps/irc/candidateSelfService/Server/VisitorJobResultsVO]
  Extended VO1 [xxss/oracle/apps/irc/candidateSelfService/Server/XXSSVisitorJobResultsVO]
  
  After that, there was another requirement of the client asking for another extension of the VO of same kind according to the requirement, I expanded ExtendedVO1 to ExtendedVO2
  
  Extended VO1 [xxss/oracle/apps/irc/candidateSelfService/Server/XXSSVisitorJobResultsVO]
  Scale of VO2 [xxss/oracle/apps/irc/candidateSelfService/Server/XXSSVisitorJobResultsVOEx]
  
  After all this flap, it is necessary to remove all these VO
  
  So I used RPG Utils Scripts to remove the Extesnions
  
  DECLARE
  BEGIN
  jdr_utils.listcustomizations('/Oracle/Apps/IRC/candidateSelfService/Server/VisitorJobResultsVO');
  END;
  
  DECLARE
  BEGIN
  jdr_utils.deletedocument (p_document = > ' / oracle/apps/irc/candidateSelfService/Server/customizations/site/0/VisitorJobResultsVO ');
  END;
  
  I received this Message of 2nd order
  
  Has been properly deleted document/oracle/apps/irc/candidateSelfService/server/customizations/site/0/VisitorJobResultsVO.
  
  Even after this message appeared and the Apache was returned again I always find the ExtendedVO2 instead of seeded VO
  
  
  
  Can some advice please a me how to remove the extensions of EBusinessSuite
  
  Published by: Doris on November 25, 2009 14:28

  Hello

  Please apply commit after using the utils RPG, then only it will work

  thanx
  Pratap

• I have a problem with removing programs from the childs account.

  Original title: how to remove programs from my childs account?  He said that you are not allowed (as it should), but does not other options.

  I was cleaning my sons account and could not uninstall or remove most of the things.

  Its been a problem since I bought this new computer.   Some programs such as Adobe Flash, Chrome, etc. installed on my account, but not on other accounts.       They must be installed on each user account if they choose to use ie: Chrome, Adobe, Java etc.
  When Adobe Flash is installed for IE it is installed only on the user account that is not installed on the computer. So basically 3 accounts 3 downloads.
  Makes no sense.   However, some programs install to all accounts.
  When I uninstall a program from an admin account it does uninstall not other accounts 2 user.
  Logging into his account, I can't remove or uninstall.   I don't really want to delete the entire account.
  How can I accomplish this?
  Thanks, Denise

  Programs may vary in how they handle the installation and the removal of several accounts.
  I suggest to uninstall those that are a problem, temporarily change the account of the child to the administrator, connect you and make uninstalling and then change it back.   Not an elegant solution, but it should work.

• Problem with remove the child to

  I have an empty clip that contains text and media for executives in a lesson called content_mc
  
  I load dynamically in a text box and then other things such as graphics, videos and other swf files...
  
  before you begin to insert swf files, it worked very well, but it was just the text on the screen, now that I have other media, it removes "randomly" children and I can't understand why it's what I use:
  
  for (var c:uint = 0; c < content_mc.numChildren; c ++) {}
  trace (c + ":" + content_mc.getChildAt (c) .name);
  content_mc.removeChildAt (c);
  }
  
  Anyone know what is happening?

  Figured it out!

  OK, for those of you who want the answer to this, but don't want to pay for it...

  I realized that when you use the removeChildAt() she removes the child of the index number... so the way I did it was like this:

  for (var c:uint = 0; c
  trace ("-" + content_mc.getChildAt (c) .name + "(" + c + "')");
  content_mc.removeChildAt (c);

  doing this, he was first to remove the child at index 0. and what made flash NOW are "slides" down an index... so the element that was at index 1 is now 0, the element at index 2 is now 1, etc... so when I arrived at the last, it would not remove it because it was no longer there...

  but change to it (instead of using the variable c, you have just put 0 in the index box):
  for (var c:uint = 0; c
  trace ("-" + content_mc.getChildAt (0) .name + "(" + c + "')");
  content_mc.removeChildAt (0);

  solved the problem :)

• Problem by removing the frontendCallback of user folder

  Hello

  I'm customizing my own reminder seq frontend and during application installation that copies to the Frontendcallback user folder (IE D:\Documents and Settings All Users\Documents\National Instruments\TestStand 4.2.1\Components\Callbacks\FrontEnd) it overrided the default reminder and worked well.

  and during the uninstallation am removing the frontend reminder of this place, but after deleting the files get "WINDOWS TRY TO CONFIGURE TESTSTAND" (see attachment) on opening the TestStand after deleting the messages callbacks.this continues until I have copy the frontend deleted in tht call fuser older.

  Why this is happening? any help to get rid of this?

  Thank you

  Biki

  This is caused by the frontendcallbacks.seq file is missing.  The Setup program detects that a component is not properly installed (in this case, the frontendcallbacks.seq file) and attempts to repair by re-running the installer.

  However, the installation program is not properly designed to take into account your ability to edit or even delete this file.  Question #257564 was created to fix this in a future version of TestStand.  However, until the installer has been changed, the only way to avoid this is to have a file with the name frontendcallbacks.seq to this place.  I would say on uninstall handing the default file in place to avoid this problem.  I apologize for the inconvenience.

  -Allen P

  NEITHER

• Also cannot open file Association problem: Addor remove problems, security centers of basic information about computer, etc. due to rundl.32.exe

  I have a program with: file Association problems: also failed to open: Addor remove problems, security centers of basic information about computer, etc. due to rundl.32.exe.

  I put security update, Internet XP but still the problem!

  Hi StanleyMcDowell,
   
  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.
   

  Follow the steps listed in the article below and check if the problem is resolved.

  Cannot find the Rundll32.exe file when you open Control Panel

• Partition problem - cannot remove (or combine)

  Fact a clean install of Vista and now my hard drive is partitioned. Now, I have no space on my C drive because there is a partition, and I can't delete the D drive.

  When I go back to the computer management, and there are two partitions. It shows now 2 local disks: 'Disk Local (c) which has 281 MB of free space of 6.83 GB' and 'Local disk (d :)) who has 68,89 GB free of 71,15 Go' (also 71 unallocated).

  Everything is on the C: which is now complete. I tried to delete the D: by right clicking on the D: but "Delete volume" is grayed out. I tried to remove it to the prompt (doc) that doesn't work anymore.

  How can I delete this partition and have my entire hard drive to return?

  Help, please!

  Jessica

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  Above is how you're supposed to do.

  We cannot solve the problems that you experience when you use 3rd Party Software like KillDisk.

  I suggest that you do a clean install of Vista and use the management tools built-in drive to partiiton the hard drive, if you wish.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS tips on clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  More tips on the clean install.

  See you soon. Mick Murphy - Microsoft partner

• He keeps forcing me to use the antivirus 2010 and a virus... I want to reprogram using my drive way to eliminate this problem, child downloaded a virus...

  Help rebuild my computer with the data saved on my drive...

  Hello

  Hope it's not too late to tell you. You need not use your drive of 4. (to 4 drives?)

  Here's a long how Remove Antivirus 2010 (uninstall Guide):
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-2010

  If you want to 'cut the hunt', scroll to the bottom for...
  For 2010 Antivirus using Malwarebytes automatic removal instructions
  and follow the instructions from there. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Please recessed a drive problem usb Removable Drive F

  Hey guys my always worked until today 16 GB usb flash drive, I put some files on my USB to my xbox, then I plugged in my computer, but for some reason, that he knows that the usb is there because it appears in 'my computer', but when I click it, it says 'Please insert a disk in the removable F drive '. It makes me really crazy, I tried to change the path and rebooting, everything that I can think of and I saw on google.

  Does anyone have any suggestions?

  Thank you

  Hello

  First of all, try to take possession of the car and check if the problem persists.

  
  

  To do this, follow these steps:

  a. click the drive you want to take control and then click Properties.

  b. click the Security tab and then click OK on the security message (if one appears).

  c. click Advancedand then click the owner tab.

  d. in the name list, click your user name, click administrator if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects .

  e. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.

  Note folder_name is the name of the folder you want to take charge.

  Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.

  Reference:http://windows.microsoft.com/en-us/Windows7/What-are-permissions

• Problem about removing a hard drive safely...

  Hello

  AM using a drive Imation Apollo 100 Portable, my problem is when I want to eject it and I click on the Safely Remove Hardware icon I do not see it, I see only open devices and printers. And when I right click on the name of the device in my computer there is no Eject Option. Help, please...

  Hello

  Yes I have connected the device to another computer and found that it functioned properly, clicking the device icon I can clearly see withdraw. Maybe there is a problem with my settings, devices and printers, because I tried to connect the small USB key and nothing appears when when I click on the Remove icon in the hardware device.

  In Device Manager, right click and select Properties on your laptop/USB drive. Look at the policies tab and see if "quick release" has been selected. Who denies the obligation to withdraw safely use to eject the disc.

  Depending on what the individual unit is capable of it can show different options strategies, including "best performance" tab and "Withdraw safely" which both functions impose eject the disc before you disconnect it. It could also be writing cache options enabled for this player on your computer which is preventing the drive from be disassembled safely while the computer is running.

• Flash problem diving remov

  When I delete a flash drive, I click on the icon and select eject the disc. I get a message that t indicates that I need to close open files, but there are no open files. In the past, I just got a message that it was ok to remove the drive. What caused this display and how can I solve this problem?

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  As described in the question, I understand that you can not remove the flash drive safely on the Windows 7 computer. I will certainly help you in this regard.

  The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.

  The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.

  So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.

  A cut-off device

  Most USB devices can be removed and unplugged. When the fact of unplugging storage devices, such as USB flash drives, make sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.

  If you see the icon remove the device safely in the tray on the right side of the taskbar, you can use it as an indication that devices have finished all operations in progress and are ready to be removed. Click the icon and you will see a list of devices. Click the device you want to remove. Windows will display a notification to tell you that it is safe to remove the device.

  Back to us for any problem related to Windows. We will be happy to help you. We at Microsoft try to provide our customers the best experience.

• Problem while removing a temporary file in the temporary storage space.

  Hi all

  There is a problem removing the temporary file to a temporary tablespace.

  I've done the steps .on oracle 10g linux

  SQL > alter tablespace TEMP1 drop tempfile ' / db/cms1/temp/cms1_temp1_03.dbf';

  Tablespace altered.

  Select FILE_NAME, nom_tablespace, BYTES/1024/1024/1024, AUTOEXTENSIBLE MAXBYTES/1024/1024/1024 from dba_temp_files where nom_tablespace = "TEMP1";

  FILE_NAME MAXBYTES NOM_TABLESPACE AUT BYTES/1024/1024/1024/1024/1024/1024

  /DB/CMS1/temp/cms1_temp1_03.dbf TEMP1

  TEMP1 /DB/CMS1/Temp/cms1_temp1_02.dbf.09765625 YES 2

  TEMP1 /DB/CMS1/Temp/cms1_temp1_01.dbf.09765625 YES 2

  The data file still exists.

  Then I tried this...

  SQL > alter the temporary database file ' / db/cms1/temp/cms1_temp1_03.dbf' drop, including data files;

  ERROR on line 1:

  ORA-25152: TEMPFILE cannot be deleted at this time

  Any suggestion of expertise would be of great help.

  Thanks in advance.

  1. create a new tablespace temp.

  2. change all the tablespace temp temporary by default for all users of the new tablespace temp.

  3. check the former temp tablespace is no longer used by v $ SORT_USAGE:

  4 drop the tablespace old temp by drop tablespace temp1, including content and data files.

• Problems to remove the script tags.

  I do not use the browser to run Adobe Story, but the desktop version of my iMac.  Command-Double-click works, but once all the 30 times.  Does anyone else have this problem remove labels from a script?

  There are other ways to remove the tags in a script

  The Panel marking:

  -Open the sequencer Panel in view Menu

  -Click the button change. Here you have the possibility to delete a tag-individual items or to remove anything from the scene.

  On the file menu

  -Open the file - menu marking

  Here you will find the options to remove tags added all/manually/automatically added.