Problem connecting to a certain router with several routers in the region

Similar Questions

• PROBLEM CONNECTING TO SQL 2008 EXPRESS WITH ASP CLASSIC BETWEEN THE WORKSTATIONS ON A PRIVATE NETWORK

  I have created a private network (no internet connection) of four workstations, each running a SQL Express 2008 installation.  All four laptops are running Windows 7 Professional.  I created a homegroup for this private network.  While I don't care sharing of files between the four workstations, I have three of them in order to connect to the SQL 2008 Express database on the fourth mobile through channels of connection in the classic ASP programs.  Each of the four laptops can see others in the network.  I can ping the ip addresses of each to the other without any problem.  When I try to launch the ASP program on three laptop computers that attempt to connect to the SQL database on the fourth, I get the server does not exist or don't access denied error '80004005'.  The same program can also run on the fourth laptop and connects to the SQL database with no problems.  I tried to use SQLOLEDB and SQLNCLI10 provider in the chain of connection on the other three.  This operation fails.  I tried to add the IP address of the computer hosting the database as a Data Source in the connection on the other three string and still fails.  Named pipes and TCP/IP are enabled.  Each laptop can connect to the instance of SQLEXPRESS executed on each, but I need three to be able to connect to the instance of SQL Express running on the fourth.  Any ideas what I can do wrong?  This connection string works fine in the ASP program to connect to the local database on each laptop:

  Connection.Open "PROVIDER = SQLOLEDB; Server = computername\sqlexpress; UID = MyUser; PWD = MyUserPassword; DATABASE = MyDatabase ".

  Nothing seems to work for the chain of connection than the other three laptops to do to connect to this database on the fourth laptop.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Question SCCM - "LANG_LIST a certain locale that does not match the regional settings of the serial number.

  I have a problem with the error 'LANG_LIST a certain locale that does not match the regional settings of the serial number' recurring.

  I'm trying to install Acrobat XI Std silently by SCCM.

  I used the Adobe Customization Wizard to create an STD which include the serial number of the volume that we have with our license purchases. Note that I am in Australia. I use the command line in SCCM for installation as "msiexec /i"AcroStan.msi"TRANSFORMS = /'D & B_AcroStd.mst' SB ' fails silently. If I install on a local computer using an admin command prompt and replacing /qb in the end, I get the above error.

  I have a few things to try to solve, after searching the forums adobe and other forums for the solution. The mst is only trying to install U.S. English & I even went up to use the Editor directly in the Customization Wizard and change some values in the property table for this problem. In the property table, I can confirm that LANG_SEL_DEFAULT = FRA, REGIONAL_LIST = FRA, LANG_LIST = en_US, ProductLanguage = 1033

  Is there a way to check the language specified for the ym serial number?

  Linda

  I contacted customer service and a live chat session. It turns out that the problem is to use a key volume license, you must download the installer from portal licenses on the adobe Web site. Once I downloaded from there, extract the msi file and used the same transformation, the installation worked.

  In other words, other downloads probably won't work for the silent installation of volume but works by Manuel installs. You will need to download it from https://licensing2.adobe.com/

• How to share files and printers between windows xp desktop that is connected to a wireless router with a laptop running windows 7. printer is connected to the desktop computer

  Hi all.  I normally wouldn't have a problem with that, but I must be missing something.  I want to create a home network or small business between my desktop running windows xp pro sp3 and my laptop running windows 7 Home premium.  I want to share files and printers.  My desktop with windows xp computer is connected to a wireless router.  The printer is connected to my desktop as well.  My laptop is wireless with the wireless router.  I tried everything I can think of to get these two devices to the network.  If anyone can help.  Don't forget, my printer is connected to my desktop with windows xp and is connected to my wireless router which is connected to my cable modem.  Internet works fine.  the laptop with windows 7's wireless and internet works fine.  just impossible to get the two see each other or share what anyone.  Thank you.

  With respect to the sharing of printer (s), microsoft has a utility called 'Print Migrator'

  Download & install, create copy, send a copy to the other pc to share its use.

• Problem connecting Wi - Fi networks unsecured with Windows 8

  Hi all!

  I have problems connecting to unsecure networks that require more authentication via browser thr, as networks of the hotel or Starbucks.
  The networks work wirh all other devices I have, but on my laptop with Windows 8, it doesn't.
  I get a "limited" connectivity and I can't sign on the browser page.
  Why is it so? How can I fix?
  Thank you!

  Hi Emme,

  The issue is limited to any particular Web site?

  This problem can occur because of network settings.

  Try the following and see if it helps.

  Method 1:

  I suggest you to run this utility from the following troubleshooting and check if it helps.

  Network troubleshooting:

  Open the network troubleshooter utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), saving troubleshooting network in the search box, touching or clicking on settings, and then type or identify and fix network problems.

  Resolution of the problems of Internet connections:

  Open the troubleshooter of Internet connections by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click Internet connections.

  Troubleshooting network adapter:

  Open the network adapter troubleshooting utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click on the network map.

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. press "Windows + R" key on the keyboard to open the run window.

  b. type ncpa.cpl, and then press ENTER.

  c. right click on your wireless network connection, then click Properties.

  d. click the wireless networks tab.

  e. under preferred networks, click your wireless network, and then click Properties.

  f. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Refer to the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  Notes:

  Reset the settings of Internet Explorer feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope that the information provided is useful.

• deployment of a BPM Application large Oracle with several projects of the user interface

  Hello world
  I'm working on a large application with Oracle BPM 11.1.1.5.0.
  
  I use JDeveoper 11.1.1.5.0 to build the application.
  The application has many tasks user with a lot of the UI (one for each task of the user).
  
  My problem is, whenever I make a small change in the project, I need to deploy this, which includes a master project and five or six projects UI (for now) for tasks of the user.
  As demand grows, I'm sure that this will certainly become a problem.
  
  So my question is if I do this the good sense? or should there be a more effective way?
  
  Thanks in advance
  
  Published by: luke on April 17, 2012 12:16 AM

  Hi Luke
  1. as a general rule, there is NO need to have a user interface project for an individual task. As initiator, approver, reviewer, LegalApprover etc etc, you have like 10 tasks (.task files). You can have just a single project of TaskForms UI and have taskDetails.jspx generated for each of these tasks. This is appropriately.

  2. any Application workflow must have only 2 deployers. Deploy resources are for real Workflow stuff that will have the main BPEL or process, BPM, human tasks etc. Basically, everything that goes into the workflow project. And another official of the deployment is that the REST of things means that the UI TaskForms project and other project support as useful projects, WebServices, EJB projects (if you have Web services). All this will be deployed as a SINGLE EAR.

  Lets take an example JDeveloper IDE point of view.
  1. application Name: SalesOrderApp
  2 workflow project name: SalesProcess (he is a a project jdeveloper project SOA or BPM Project type and has all human tasks, bpels, process bpm, rules etc.).
  3 interface user Project: SalesTaskForms (it is a form generated automatically for the first task you choose. Then for the rest of the tasks you can use this same project, to generate jspx for all others. WORK files. VIEW documents online on how to do it. I'll see if I can compile this list of URLS for you).
  3. support the EJB projects: MyEJBProject1 (some EJB project that connects to some specific to your back-end database project)
  4. support another Service EJB project: MyExtServiceProject1 (as another project EJB that uses data from an external source)
  5. some WebService project: SalesCreditCardValidationWebService (some WebService project to be deployed as. WAR file that performs a service).

  Try to apply the Concepts of SOA for each Service your application needs. Instead of putting all the EJBs and everying in one giant project, try to split their need logically commercial/sage and geenrate separate projects so that they can maintain as it is to other projects and other applications.

  Anyway, coming back, in the example above, you should have deployment just 2: 1 is the JAR file of SCA in the Workflow and another complete of the EAR file.
  (a) for the workflow project, right-click and generate a deployment profile to deploy all the workflow and NOT on the other projects of the user interface.
  (b) for each project individual genereate a profile of deployment such as MyEJBProj1, MyEJBProj2, MyWebService1, etc etc.
  (c) for TaskForms project, generate a deployment as SalesTaskForms profile. It is a WAR file.
  (d) at the level of the Application, create a new profile of deployment of the EAR type and now assemble all the projects in this EAR, with the exception of the Workflow project.

  First of all, you deploy file JAR of SCA of the Workflow. You need to redeploy this again only when you make changes to the workflow, humantasks etc etc.
  Deploy the full blown EAR file that has all the stuff (EJB JARs, TaskForm WARs, WebService wars etc.).

  At any time, you change your code taskforms or redeploy a java, ejb, EAR file.

  You should have a POT and an EAR to deploy at the end of the day. Infact this is how it should go into UAT, and production. They may not have many pots, multiple wars deployed. The reason why we have separated Workflow SCA Jar file is, because the workflow will not change frequently. And also older versions of SOA/BPM (before 11.5 FP) have a huge disadvantage. Whenever we deploy a workflow project, it will make existing processes VITIATED, unless you deploy a different version. This isn't a problem anymore for 11.5 + FP (Feature Pack applied). Therefore, be careful when you redeploy workflow project.

  Thank you
  Ravi Jegga

• During the closure of 2 windows (with several tabs), restore the system does restore properly the tabs in the window of the second. Is this a bug in the new update / all ideas to fix?

  I regularly use 2 windows with multiple tabs of each and session restore would work to bring them all back, but after this last updated the second window restores correctly, with the first non-visible tab on top (only in the menu drop-down) and now the button add a tab on the left (instead of right). Add a button to the tab is not really as far as concerns the other than it indicates other problems with the tabs in the 2nd window. No no not the 1st tab visible is frustrating, because I can't move or also easily navigate. Also, the tabs on the top of the 2nd window which are visible is no longer have the 'x' to close visible, except when this tab is selected. I'm assuming that it is a problem with the new version/update, since this is the first time I encountered the problem, and I closed and restored Firefox several times to make sure it was a recurring problem and not a one-time problem. Any ideas on how to fix would be welcome (except maybe cramming my tabs on a window or it suck XD).

  Thank you for your help. None of your suggested solutions worked, but having just updated to 10.0.2 seems to have solved the problem.

• Querying a file with several records in the only positional line

  Hello
  
  I'm trying to interview a positional file with reading. It works very well with single single-line record. But how to solve the problem when there are multiple records with the single line? How to delimit records?

  Hello

  It's a little difficult to achieve...

  In your xsd translator remove this attribute * nxsd:cellSeparatedBy = "${eol}."

  and replace with this * nxsd:arrayTerminatedBy = "${eof}."

  It worked for me. Let me know if you need a more complete example.

  See you soon,.
  Vlad

  * Give points - this is the right label to reward an answering machine (5 - useful; 10 - correct) points for their position if they answer your question. If you think it's useful, please consider points *.

• Appeal with several parameters of the URL

  Hello!
  
  I'm unable to call a procedure by URL with several parameter, a parameter is passed to the following example, the syntax would be like spending several parameters?
  
  # OWNER #. PK_UTIL. PKB_TXT? En_param1 = xxx
  
  How to include the second parameter? I tried several and could not happen.
  
  Thank you
  
  Márcio Goncalez

  This isn't really a question of APEX but more close mod_plsql or the apex listener I think?

  Have you tried?

  # OWNER #. PK_UTIL. PKB_TXT? En_param1 = xxx & En_param2 = yyy

  James

• problem update to bind a member with an attribute using the rule of load

  Hi - I'm trying to update an existing Member with another attribute of the dimension of the attribute by using a load rule. In the properties to build the dimension, I have the name of the selected member where it says size. Underneath, I field Type, here, I have the dimension of the selected and then attribute below I have the number 0, to match with the child member, I'm trying to update for.
  
  I am able to validate the rule, no problem, but when I run the update plan, my attributes for this member does not update. This happens to all of my attributes.
  
  I'm on Essbase 7.0.
  
  
  Thank you

  You should (at least) two columns in your rule of load. The first column with the names of members of the basic members you want to associate attributes to and in the second column of the attribute member name.
  If the dimension build properties for the first column, you set the name of the dimension and type of build level or generation (I suggest level) and set the number of levels. (Do not forget the dimension properties build to build level or you will get an error)
  The second column, select the dimension then go down and select the dimension of the attribute that is associated with this dimension of the base

  For example for the Basic sample, you may have a line that looks like

  100-10 can

  For the first column, you would select Dimension = product, value of Type level = 0
  The second column would Dimension = product Type = attribute dimension Pkg Type

  In the dimension settings, make sure product is set to build level and can associate attributes and allows you to change the link.

• With the help of D7000 with other routers on the network

  I'm trying to connect my router D7000 with other routers on my network

  None of these options allow to my D7000 router be considered a WAN device on my other router.

  Why not allow it? Are there problems with the firmware?

  I've now solved the problem on my own without Netgear support

  The problems have been resolved

• Daisy chaining with other routers and the common IP range EA6500 V2

  I have a local network of...

  • a modem
  • a gateway connected to the modem computer/server
  • has a modem-router connected to the gateway/server via the port of the gateway/internet
    (gateway/a two server NETWORK interface card)
  • a and B modem router wireless connected to the router via the gateway/router internet port B
  • both A and B using the same set of IP addresses, 192.168.0.XXX

  Now I want to do the same thing with my Linksys EA6500 V2 I did with router B, I want to connect the Linksys router has via gateway/internet port on Linksys.  In addition, I want the Linksys router to use the DHCP server on the gateway server / as everyone is on the local network and, of course, I want to use the series of IP addresses, 192.168.0.XXX.

  What I tried to do is to disable DHCP on the Linksys service, but nothing seems to change once the changes are activated.  I look in the Local network settings and see all the old default 192.168.1.1 for the router address and so on.  I also tried to change the address of the router manually an address of 192.168.0.x and was immediately cut off this subnet.  I tried the renewal of my Windows client computer and couldn't do that either.  And as my client could not change its own address 192.168.1.X, I couldn't reach the router to the address that I gave him.

  How can I set up this router so that it uses the DHCP server on the gateway/server computer, including acquiring its own address in the same series.  Or at least set up so that it uses the same series of address than the rest of the LAN and no longer functions as a separate subnet?

  It seemed that all I had to do to set up router B to connect this way was to disable the DHCP server and everything fell into place, no problem.  Is this all I need to do here?  Am I supposed to restart or something?  I'm tired of guessing and trial and error.

  All tips or hints would be appreciated.

  You have to give the EA6500 a router static IP address in the same subnet as your network, but not in the DHCP range.

  Follow the instructions for 'LAN to LAN' Cascading in the link below:

  In waterfall or connect a Linksys router to another router

  Thing to keep in mind when cascading a router:

  1. Change the IP address of the secondary router to something like 192.168.1.254 so its on the same network, but is not in conflict with the main router
  2. Make sure that the DHCP service is disabled on the secondary router
  3. Make sure that nothing is ever connected to the internet port of the secondary router
  4. Differentiate the wireless SSID by location (Ex: downstairs) and the channel

• Variable setting wrong with dynamic action for the region of report

  Hello

  I can't setting a variable. Here are the details of connection:

  Connection information:

  TCARMY workspace

  User Apex_dev

  Password dev_apex

  Application 88542

  Page 11

  If you run the page 11 and just click on submit, there will be two rows. If you click on one, the modal region won't say no data found. If you click on the button submit once again, the value is passed if you click on it now, the results arrive. If you click on the second row, it still shows the value of the first row. If you click on submit again after clicking on the second line, then it is displayed correctly. It seems that the value is set to submit it. I want this to work when clicked, and then for the sql to run with the value that is in this variable when clicks on the element. There is a bit of javascript page level and dynamic action. Something is not right to the installation.

  The modal window should popup and run the sql at that time with the variable data and view the two columns. And if the user clicks on the second row, it would display the data in the row.

  
  Thank you

  Tim

  TC-army wrote:

  If you run the page 11 and just click on submit, there will be two rows. If you click on one, the modal region won't say no data found. If you click on the button submit once again, the value is passed if you click on it now, the results arrive. If you click on the second row, it still shows the value of the first row. If you click on submit again after clicking on the second line, then it is displayed correctly. It seems that the value is set to submit it. I want this to work when clicked, and then for the sql to run with the value that is in this variable when clicks on the element. There is a bit of javascript page level and dynamic action. Something is not right to the installation.

  What has not been set up right, it's that the element of P11_NAICNUMD parameter was not specified in the source attribute of Page to go to the region, modal Discount. The current value in the browser page, therefore, was not defined in session state when the report has been updated by the dynamic action. When

• Problems connecting an older Acer laptop with Windows XP using a dlink router

  I recently bought a new router dlink (N 300 Router wireless) and installed on my Dell desktop computer that is running Windows 7 Home Premium, desktop as well as my Sony Vaio laptop which runs the same OS connects fine to the internet. When I try to connect to the Acer laptop it does not connect to the internet, when I try to 'Fix' the wireless connection, he says he can't fix it. It allows to connect very well with older dlink router but I had to replace it, the new router says it's compatible with Windows XP. Does anyone else have this problem?

  Hi Bluemoongal,

  If you try to connect the Windows XP laptop to the wireless router, follow the steps described in this document...

• Unable to connect to a wireless router with my laptop

  I bought a laptop on 12/26/08 and now I have technical difficulties with regard to the internet wirelessly, via the LAN connection it s ok and wireless radar can see all available networks, but cannot communicate with them.

  It starts and then say that it s a unverified network and just say connect but don't make any progress, and the internet is still not functional

  I m using the router without wire of 7mg eircom and is placed outside the door of the room of my bed with full strength.

  It would be interesting to know what laptop you have.

  Have you tried to update the driver WLAN? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Have you tested the connection without security as a hidden SSID, MAC address filtering and so far? Try this.