Problem connecting to local profile

Original title: profile Local connection problem

Hello

connection problem with a local profile as well domain profile

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Tags: Windows

Similar Questions

  • Problem connecting to user profile.

    We have two users on your laptop. Recently an of can not connect. Message indicates "service user profile Service does not log. User profile cannot be loaded. »

    Help!

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • Windows cannot load the locally stored profile. Possible causes of this error include insufficient __security rights or a damaged local profile. If the problem persists, contact your network administrator. __

    Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If the problem persists, contact your network administrator.
    My documents are 'hidden' also

    xpconfused,
    This article explains how to solve problems with a corrupted profile. Article  After return your results. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Unable to connect because of a damaged local profile

    I try to connect using my administrator ACCESS. and a box comes up saying impossible due to a damaged local profile. It then passes a new ACC with none of my files on it.

    The easy way to recover from this is the following:

    "How to recover damaged Windows XP user profile"
      <>http://support.Microsoft.com/kb/555473 >

    Corrupt profiles are usually accompanied or caused by the corruption of the user's hard drive.  You can also run a disk check with the ' / f ' or ' / r ' option to verify that your hard disk is in good condition

    "How to perform disk error in Windows XP check"
      <>http://support.Microsoft.com/kb/315265 >

    HTH,
    JW

  • I have a problem of limited local connectivity. I'm online but cannot enter certain websites because of this, and my laptop is running slowly.

    connectivity issue local limted

    Hello

    I have a problem of limited local connectivity.

    I'm online but cannot enter certain websites because of this, and my laptop is running slowly.

    to try and reslove this prob. I have: -

    Restored to an earlier date

    Router and the laptop reloaded

    Connected wireless

    and unchecked internet Protocol version 6

    repaired, windows tell me that no problem of the internet are.

    Can someone help before I have to consider the world PC boo hoo

    Hello TillyTwo,

    I suggest looking at the answer of Irfan in this thread that seems to relate to your specific question:

  • I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

    Dear all,

    I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
    This system is joined to the domain and the profile is an Active Directory user.
    Here are the details of the event ID:

    Details

    Product:

    Windows operating system

    Event ID:

    1515

    Source:

    Userenv

    Version:

    5.2

    Symbolic name:

    EVENT_PROFILE_DIR_BACKEDUP

    Message:

    Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects.

    Explanation

    A temporary user profile is loaded because Windows was unable to connect with your local profile.

    A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records.

    Note: Any changes made to the temporary profile is lost once you disconnect.

    User action

    Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

    There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.
    Please, help me to create the same user profile in the system with formatting system.

    Hello

    I suggest you to refer to this link and check if it helps:

    http://support.Microsoft.com/kb/947215

    It will be useful.

  • How can I fix to "corrupt the local profile" on my computer

    Original title: user environment

    Switching on my laptop I get message... corrupt local profile... cannot find the local profile... used temp.profile and all changes when closing down will be lost.

    Then if I try to download say Barclays and then save it in the Favorites folder, then disappears from the Favorites when that I log out, then I'll have to find when opening upward once again!  How can I get rid of this bug?  I tried to return to an earlier date, but laptop does not accept this.

    This is a typical symptom of a corrupt user profile.  It happens from time to time.  When Windows detects a damaged at the time of the logon user profile, he tends to switch to a temporary user profile that has all the privileges of the user of origin, but otherwise, it looks like you connected for the first time as a new user.  Note that this is a * temporary * profile.  All the files that you save on the desktop or in the "My Documents" folder will not survive a logoff.  It is not too difficult to recover from. Tip: If you use "System Restore" restore to an earlier date, start mode (repeatedly tap the F8 key at startup key) safe and run the system, safe mode restore.  Choose one of the following articles:

    "How to recover damaged Windows XP user profile"

    <>http://support.Microsoft.com/kb/555473/en-us >

    "Windows XP problems if your profile is corrupted"

    <>http://support.Microsoft.com/kb/326688/en-us >

    "How to copy data from a damaged to a new user profile in Windows XP user profile"

    <>http://support.Microsoft.com/kb/811151/en-us >

    Corruption of user profiles is almost always accompanied, if not caused, the Corruption of system files.  So after recovery, it's a good idea to perform a check disk (chkdsk) complete with the "/ R" or "repair/recover' option.  Note that the audit will take place at the next restart before Windows load fully, can take more than a few hours and can not be interrupted.  Sometimes the drive verification procedure can fix this problem with no further action necessary.

    "How to perform disk error in Windows XP check"

    <>http://support.Microsoft.com/kb/315265/en-us >

    HTH,

    JW

  • message "windows cannot load the locally stored profile. Insufficient rights or a local profile damaged

    Loading registry

    have it on my computer, docs, most missing desktop icons.  message "windows cannot load the locally stored profile.  Insufficient rights or damaged local profile. "Managed to go to the C drive and locate the photos and docs.  give me an option to connect you with one identifier temporary but everything disappears when I restart. Is there anything I can do or take it to a computer expert.

    Any guidance would be appreciated.

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, read the information below:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • Problem connecting wifi blackBerry Smartphones on 8900

    Hi guys,.

    Just bought my bb which is an amazing piece of kit. I am a customer of uk on O2, a payday that you use the data service, but have a contract with o2, I downloaded my settings of them and DIRECT email services work fine.

    but im having a problem accessing any service through my home wifi network, I tried to remove security and and allowing all traffic to the bb with no luck. apparently the o2 can't help. My bb recognize the network and connects to him and I get a green "sky24083", but I get a gray line instead of a tick. I searched the forums, but nothing seems to work. any help would be greatly appreciated. A reading of diagnostic wi - fi

    A Wi - Fi connection

    Current profile: SKY24083

    SSID: SKY24083

    AP MAC address: 00:1E:74:B9: *: *.

    Security type: open

    Association: success

    Authentication: success

    Local IP address: 192.168.0.4

    Signal level:-46 dBm

    Data connection speed: 54 Mbps

    Status: Acquired network

    Authentication failure reason:

    Network type: 802. 11 b / g

    Network channels: 6

    Encryption in pairs: no

    Group Cipher: no

    Gateway address: 192.168.0.1

    DHCP: success

    Primary DNS: 192.168.0.1

    Secondary DNS: 0.0.0.0

    Suffix DNS: Home

    Subnet mask: 255.255.255.0

    Server's domain suffix:

    Certificate: Not Applicable

    Software token: not Applicable

    Auth L3:

    VPN

    Current profile:

    Address of the hub:

    Contact: n/a

    Authentication: n/a

    Secure the device IP:

    Status: VPN profile is not found.

    Hub address: n/a

    Hub IP:

    Primary DNS:

    Secondary DNS:

    DNS suffix:

    Set the subnet mask:

    Restart:

    The life of the session:

    Re-login to:

    Failed connection attempts: 0

    Certificate:

    Software token:

    BlackBerry infrastructure

    Address:

    The IP protocol used:

    Connection: error

    Router authentication: N/A

    Authentication server: N/A

    Last Contact to:

    I only did the actions in the thread I posted.  I don't know about the removal of books.  Take out the battery and do a reset solved my problem.

  • Problems connecting to help connect any and the Ipsec VPN Client

    I have problems connecting with the VPN client connect no matter what.  I can connect with the Ipsec VPN client in Windows 7 32 bit.

    Here is my latest config running.

    Thank you for taking the time to read this.

    passwd encrypted W/KqlBn3sSTvaD0T

    no names

    name 192.168.1.117 kylewooddesk kyle description

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 192.168.1.1 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address dhcp setroute

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    boot system Disk0: / asa822 - k8.bin

    passive FTP mode

    DNS lookup field inside

    DNS domain-lookup outside

    DNS server-group DefaultDNS

    domain wood.local

    permit same-security-traffic intra-interface

    object-group service rdp tcp

    access rdp Description

    EQ port 3389 object

    outside_access_in list extended access permit tcp any interface outside eq 3389

    outside_access_in list extended access permit tcp any interface outside eq 8080

    outside_access_in list extended access permit tcp any interface outside eq 3334

    outside_access_in to access extended list ip 192.168.5.0 allow 255.255.255.240 192.168.1.0 255.255.255.0

    woodgroup_splitTunnelAcl list standard access allowed host 192.168.1.117

    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

    outside_access_in_1 list extended access permit tcp any host 192.168.1.117 eq 3389

    woodgroup_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0

    inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.240

    inside_nat0_outbound_1 to access extended list ip 192.168.5.0 allow 255.255.255.240 all

    inside_test list extended access permit icmp any host 192.168.1.117

    no pager

    Enable logging

    timestamp of the record

    asdm of logging of information

    Debugging trace record

    Within 1500 MTU

    Outside 1500 MTU

    mask pool local Kyle 192.168.5.1 - 192.168.5.10 IP 255.255.255.0

    IP local pool vpnpool 192.168.1.220 - 192.168.1.230

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm - 631.bin

    don't allow no asdm history

    ARP timeout 14400

    Global (inside) 1 interface

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound_1

    NAT (inside) 1 0.0.0.0 0.0.0.0

    public static interface 3389 (indoor, outdoor) 192.168.1.117 tcp 3389 netmask 255.255.255.255 dns

    public static tcp (indoor, outdoor) interface 8080 192.168.1.117 8080 netmask 255.255.255.255

    public static tcp (indoor, outdoor) interface 3334 192.168.1.86 3334 netmask 255.255.255.255

    static (inside, upside down) 75.65.238.40 192.168.1.117 netmask 255.255.255.255

    Access-group outside_access_in in interface outside

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-registration DfltAccessPolicy

    WebVPN

    the files enable exploration

    activate the entry in the file

    enable http proxy

    Enable URL-entry

    SVC request no svc default

    AAA authentication http LOCAL console

    Enable http server

    http 192.168.1.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    crypto isakmp identity address

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet 192.168.1.0 255.255.255.0 inside

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    dhcpd dns 8.8.8.8 8.8.4.4

    dhcpd lease 3000

    !

    dhcpd address 192.168.1.100 - 192.168.1.130 inside

    dhcpd allow inside

    !

    a basic threat threat detection

    host of statistical threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    allow outside

    SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image

    enable SVC

    internal sslwood group policy

    attributes of the strategy of group sslwood

    VPN-tunnel-Protocol svc webvpn

    WebVPN

    list of URLS no

    internal group woodgroup strategy

    woodgroup group policy attributes

    value of server DNS 8.8.8.8 8.8.4.4

    Protocol-tunnel-VPN IPSec

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list woodgroup_splitTunnelAcl_1

    mrkylewood encrypted Q4339wmn1ourxj9X privilege 15 password username

    username mrkylewood attributes

    VPN-group-policy sslwood

    VPN - connections 3

    VPN-tunnel-Protocol svc webvpn

    value of group-lock sslwood

    WebVPN

    SVC request no webvpn default

    tunnel-group woodgroup type remote access

    tunnel-group woodgroup General attributes

    address pool Kyle

    Group Policy - by default-woodgroup

    tunnel-group woodgroup ipsec-attributes

    pre-shared key *.

    type tunnel-group sslwood remote access

    tunnel-group sslwood General-attributes

    address pool Kyle

    authentication-server-group (inside) LOCAL

    authentication-server-group (outside LOCAL)

    Group Policy - by default-sslwood

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the netbios

    inspect the rsh

    inspect the rtsp

    inspect the skinny

    inspect esmtp

    inspect sqlnet

    inspect sunrpc

    inspect the tftp

    inspect the sip

    inspect xdmcp

    Review the ip options

    type of policy-card inspect dns MY_DNS_INSPECT_MAP

    parameters

    !

    global service-policy global_policy

    context of prompt hostname

    call-home

    Profile of CiscoTAC-1

    no active account

    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

    email address of destination [email protected] / * /

    http https://tools.cisco.com/its/service/...es/DDCEService destination address

    destination-mode http transport

    Subscribe to alert-group diagnosis

    Subscribe to alert-group environment

    Subscribe to alert-group monthly periodic inventory

    monthly periodicals to subscribe to alert-group configuration

    daily periodic subscribe to alert-group telemetry

    Cryptochecksum:6fa8db79bcf695080cbdc1159b409360

    : end

    asawood (config) #.

    You also need to add the following:

    WebVPN

    tunnel-group-list activate

    output

    tunnel-group sslwood webvpn-attributes

    activation of the Group sslwood alias

    Let us know if it works.

  • People mistake app: we are going to have problems connecting to Facebook

    My Facebook is synchronized with the people app (using the Microsoft account), but now it only shows my friends list and unable to connect to the new Facebook or my profile (error: we are going to have problems connecting to Facebook). I checked all check the Live (https://profile.live.com/services/connect?sourceid=fb) profile and my network is complete connection.


    I tried to uninstall/reinstall the people app, run AppsDiagnostic, go to the Local account, delete/reissue Facebook account with my MS account, update the latest version of the app and sync App licenses on setting store updates, but nothing changes!

    That's happened? How can I solve this problem?

    Please help me!

    Hello

    Welcome to the Microsoft Community Forums.

    Looks like you got an error message "we are going to have problems connecting to Facebook" people app.

    Since you did all the steps, we will perform refresh on the computer to see if there is a problem with the settings of the application.

    Create installation media to perform the update:

    How to create an installation media for a PC refresh or reset

    http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

    Perform Update and see if it helps.

    a: press the logo Windows + O to open the search box.

    b: now, type refresh your PC , and then press ENTER.

    c: Now click on Get Started under Refresh your PC without affecting your files.

    d: Now click on Next.

    Note: updating of Windows 8 will remove all third-party applications installed, and it resets all default Microsoft applications.

    Reference:

    How to restore, refresh or reset your PC

    http://Windows.Microsoft.com/is-is/Windows-8/restore-refresh-reset-PC

    Hope this information helps. Get back to us with the status so that we can help you.

  • Problems connecting to a site I never had problems before

    Hello
    I don't know if my current problem is related to the LENGTH of the questions that I posted earlier today. This morning I logged on a website as usual, but tonight, I have a problem connecting to. When I can I connect, I can not use the services. First of all, I have a new page greeted me that I've never seen before.

    Another thing, should I say that I don't have the latest FF browser when I click on help == > Feedback. Today, I downloaded the latest version 19.0.2.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    If clearing cookies doesn't work, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.

    Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other files to present as cookie cookies.sqlite - journal in the profile folder of Firefox in the case where the cookies.sqlite file has been corrupted.

    You can use this button to go to the Firefox profile folder:

    • Help > troubleshooting information > profile directory: see file

  • problems connecting to gmail and other sites (unles in inprivate mode?)

    Hello

    I have problems connecting to gmail (unless in private mode?)

    I had a similar problem with www.kvraudio.com and I removed the cookie manually.

    I removed the cookie from gmail (I think), but it did not help. There are a few cookies from google, but I'm not messing things.

    So far, I like firefox but I need to be able to "connect to sites" without their "brought back me to the login page" each time

    Can you help me?

    If clearing cookies doesn't help, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.

    Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite - journal and cookies.txt, if they exist, in the profile folder in case the cookies.sqlite file has been corrupted.

  • The user profile Service service failed to connect. User profile cannot be loaded

    I go through the motions of an administrator account and everything seems to work but when I try to use it the first time I get a message error "the service user profile Service could not connect. User profile cannot be loaded. When I look, there is no user under users profile. Some error logs says "access denied." How to operate?

    Hello

    ·         You have made no changes to the computer until the problem occurred?

    I suggest you follow the steps in the link below to solve the problem you are experiencing.

    http://support.Microsoft.com/kb/947215

  • Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

    "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

    Profile of user could not be added

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

Maybe you are looking for