Problem creating ePub

Similar Questions

• 12.4.3.1 update volume problems created?

  12.4.3.1 update volume problems created?

  Hello

  I had no problem with the Volume in the latest version of iTunes. Can you give more details about the problem you are having?

  Jim

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  This means that the folder you want to create is blocked because of file permissions. The drive or folder you are trying to create the destination folder is set to read-only, and your username does not have write permissions.

• Problem creating the destination for Lightroom 6 folder

  Just upgraded to Lightroon 6. Now I have a problem creating the destination folder. Already checked the folder permissions. Even tried a new folder nothing helps. A lot of space on the computer.

  Don't know who to turn to next. Is this a problem of individual computer?

  You must use a computer with permissions of administrator account

  Also, do a right click on the installer and select RUN AS ADMINISTRATOR from the popup option window to see if that helps

• How to create ePub available files fixed

  I have just piurchased ID - CS6. My goal in upgrading is thatI am Illustrator / author of books for children and am dying to learn how to create ePub fixed provision for apple files and the Kindle of out of print books. Can you tell me where the best place is to learn how to do this? Thanks in advance!

  Also looking for user groups!

  Ah, well take a look here:

  rel http://www.rorohiko.com/WordPress/manuals/Fixed-layout-EPUB-Assistant-in-InDesign-epubcraw.

  http://www.YouTube.com/watch?v=VNgtx2oUnxU

  http://www.circularsoftware.com/sneak_preview/

• Problem creating hierarchy based on 2 physical dimension tables

  I'm having a problem create 1 dimension logic with a hierarchy of exploration, based on two separate physical dimension tables. The errors I get when navigating in the exploring hierarchy is:
  "Cannot find coverage source logical table to the columns of the logical" &
  "Missing join between the logical tables.
  
  I use OBIEE 10.1.3.4
  Here are the details of what I have set up as:
  
  Physical layer:
  Table DIM_ORG with the dimension columns:
  -dimension_key
  -org_total_code
  -org_total_description
  -org_detail_code
  -org_detail_description
  
  Dimension table DIM_DEPT with columns:
  -dimension_key
  -dept_total_code
  -dept_total_description
  -dept_detail_code
  -dept_detail_description
  
  FACT_SALES table with columns of facts:
  -fk_org
  -fk_dept
  -sum_sales
  
  Physical joins:
  FACT_SALES.fk_org = DIM_ORG_dimension_key
  FACT_SALES.fl_dept = DIM_DEPT.dimension_key
  
  Business model and the mapping of layer:
  I created a logical dimension ORG_DEPT. It contains two sources of logic table (DIM_ORG & DIM_DEPT) and the following logical columns:
  -All departments (mapped to dept_total_code)
  -Organization (mapped to org_detail_description)
  -Organisation number (mapped to org_detail_code)
  -Department (mapped to dept_detail_description)
  -Department Code (mapped to dept_detail_code)
  The logical key of the company is based on the combination of number of organization & Department Code
  
  The hierarchy, I need is: all departments-> organization-> Department so I created the following hierarchy for ORG_DEPT:
  -Total level containing: all departments
  -Organization level containing: company (defined as logical level key) number & Organisation (als defined the key level drill)
  / Department detail level containing: Department (defined as logical level key) Code and the Department (defined as key level drill).
  
  In the LTS of the ORG_DEPT dimension, I've set levels of content for sources:
  DIM_ORG: Level of organization
  DIM_DEPT: Level of detail Department
  The LTS non - joins inner - came against the associated physical tables.
  
  I created a logical fact table (based on the physical fact table) SALES and joined him on the ORG_DEPT logical dimension table.
  In the LTS, level of content for ORG_DEPT is part of the level of retail service. Non - joins inner were aded against related physical tables.
  
  When I create a report in response to test the hierarchy and select only "all departments' I get the value of the returned correct size. When I try to break through to the next level, I get the following ODBC error:
  "Could not find coverage source logical table for logical columns: [all of them]." "Please check more detailed level keys are correctly mapped.
  
  When I create a report in responses and select "Every department" and "Sales", I get the correct result. When I try to break through to the next level, I get a different ODBC error:
  "Lack of join between the logical tables DIM_DEPT and DIM_DEPT: there must be at least a physical link to join between the underlying physical tables.
  
  All suggestions are welcome!
  
  Thank you!

  You have no relationship defined between the Department and org.

  You can either:
  a. create a table of physical dimension with a composite key of org_id & dept_id if there is a relationship defined somewhere, then to obiee model as you have already done, but in the physical layer on the composite key join
  b. model your exisitng as two-dimensional and two hierarchies tables and set up a path of forest favorite between them according to your needs.

  Kind regards

  Robert

• Problems creating a DB on ASM 11.2.0.1 10.2.0.4/11.1.0.7

  Hello
  
  I have some problems creating a DB 10.2.0.4/11.1.0.7 on top of ASM 11.2.0.1 using dbca. I can't get past step 7 when I select the DSO as a storage device.
  
  Here are the steps I did:
  
  -Install a 2 11.2.0.1 with ASM and Clusterware node RAC cluster, it worked well.
  -Set the 'Compatibility DB' 10.1.0.0.0 on in ASM disk groups.
  -Installed and configured a 11.2.0.1 database on this cluster, this has worked.
  -Installed software DB at separate Oracle 10.2.0.1.
  -Updated installation of 10.2 to 10.2.0.4.
  -Installed software DB at separate Oracle 11.1.0.6.
  -Updated installation of 11.1 to 11.1.0.7.
  
  Now, when I run dbca (it produced both of the O_H 10.2 and 11.1) in step 7 in the wizard I select "Select ASM as storage" and then when I press Next, I get this error message:
  
  "DBCA couldn't start the ASM instance is configured on this node. To proceed with the creation of the database using ASM, you need the ASM instance to be operational. You want to re-create the ASM instance on that node? "
  
  In the dbca log file I see "ASM present but is not activated, user mark..."
  
  What should I do to be able to create a DB 10.2 on 11.2 ASM? I also tried to put TNS_ADMIN to the directory of network/admin under the grid infrastructure, however, this does not work eitther, I still get the same problem.
  
  Any ideas what are the measures that I have to do in order to create a 10.2 / 11.1 DB on top of 11.2 Grid Infrastructure?
  
  Thank you

  It seems that the problem is related to the following bug:

  Bug.8288940 (74) TB - CMP 11106 DBCA TRY TO START 11.2 ASM WHICH IS ALREADY in PLACE AND REPORT FAILURE

  After applying the hotfix 8288940 at home 10 g DB, the creation of data base RAC succeeded.

  Hope this helps,

  Lisa Vance

• Hyperlink problem creating layout fixed ePub

  Hi guys, do not know if anyone can help...

  I created an ePub fixed provision from a printed document and everything works perfectly apart from, I can't have hyperlinks to work.

  Initially I would put in place of the hyperlinks on my text that did not work. After a bit of digging around, I found documentation indicating that text hyperlinks do not work and they need to be pulled from an image. In addition, internal (to other pages) links do not work, only links to external URLS - lucky for me - all my required links are to external URLS, however, they appear always at work... anyone have any suggestions as to what I might hurt?

  I'm testing with Redium on Windows 7 and iBooks on iPad Air

  Thanks in advance

  Sincere greetings

  Poll

  Hi, survey,

  I think that you have applied on the image hyperlink and not the frame that is to say, if you select the picture frame you see a hyperlink applied to this topic?

  We export hyperlinks that are applied directly to the image, they should be on container chassis. What is your case? Please confirm.

  Kind regards

  POOJA

• Export InDesign CC problem in epub images

  I have a problem with an epub in InDesign CC 2014. It has images placed in the text and some do not display correctly when the book is exported to epub.

  I have attached a picture to show what's happening. The image is repeated in part at the top and then cut down.

  This is not the case with all the pictures in the book.

  The book is set up with a document of a book containing separate coverage, introduction, content files and each chapter in InDesign.

  Each image was inserted in the text by me setting a return in the document formatted with a style of photo to the center of the image and put a few abova space and below the image and then placing the image of this paragraph mark. I have not formatted the images in any other way, and some had to be reduced to fit on the pages of the book. Most of the images that were brought down show very well, but we have this problem. Another SOM that is installed on the page that they were inserted into the images I have this problem of repetition.

  I have exported the recomposable epub and then I used the standard export ID CC for the epub parameters.

  It seems to me that created for the epub CSS is dealing with images as background images and repeating. I looked in the code for the epub and did not see where this is going well.

  I've done several ePub for the customer even files with the images inserted in the text as this, and other ePub files did not have this error with the images.

  Is someone can you please tell me why this is happening now?

  

  I found the solution to this myself.

  You must set the images in the epub to export in png. The problem goes away.

  I found this as a hint on a forum somewhere else after having done a lot of research. I can't find the link to the forum at the moment, but if I do I'll post it here as well.

  Problem solved and the customer is happy.

• How to create ePUB with full-size images/pages to adjust according to the device?

  Friendly greetings,

  I tried, for almost two months, to convert/create my 7 books that are printed in electronic books; with the first edition had to be Nook, with Kindle on the list. Unfortunately, I am still working on just get the first one published! And I could really use any assistance to get this figured out. My intention was to publish several weeks ago... now my despair must publish before the weather gets too hot and the children are outdoors most of the time... or at least not later than Easter. (: 0)

  First of all, my books are books of photo/poetry for children of all ages. They were all designed in Photoshop, where I also created images full size for the first eBook. I received the specifications of B & N for the different devices of Nook. In the assumption that it would be better to create the largest files, thus allowing smaller size devices to fit the page accordingly to fit and the most important would not encumber a smaller image, I size my pages to 1280px x 1920px at 72 dpi. (now I hear 150 is standard?)

  My text is included in the image that design is an image = a single page. I've included a version only the full text of the poem/story at the end for those who want to set the text or use a voice reader. I obviously all original, but for the publication they were all saved as jpg.

  After a fight and a lot of frustration, I managed to finish the manuscript for Barnes and Noble Nook press Manuscript Editor. My internet is molasses and so much of this has been done in the wee hours of the morning when the rest of the time zone is asleep. I had only a page with a problem, an additional empty line/space was irreparable. I published and it had been completely sloppy to be published, although the preview looked a-okay. Only on the upper left of each image/page 1/6 was visible in the corner of my laptop to PC or Nook of my Tablet Android App. So I desperately waited another 10 hours, hoping that no one would buy my book Meanwhile, so he could be removed from the sale.

  I downloaded a demo of InDesign CC, and after two weeks of not even being able to create a new single document for some reason any twisted, I bought a month membership. So far, I am not entirely convinced of this creative Cloud malarkey together, as much... that, like I said my internet is slow... it took me nearly 20 hours just to download the software. (It is really difficult to provide records, seriously?) After a cat and a phone call that I can, in theory, now use InDesign.

  I created a new Document for Digital Publishing to the above specifications (1280 x 1920 px). I did rectangle the size of the page placeholders and place one image per page. This usually inserted the image to 50% and I have to select 100%, and then move them if necessary to place.

  So my first question is: is it possible to place an image at 100% without having to do this step further resizing? Or is there another way to place the image in the size of the page without any of these other measures that would be too good.

  Well, after placing several pages/images I have also selected each and went to Options of Export Object and checking the rasterization of Custom and "resize to text Flow.  I then exported ePUB trial to see how it would look. On the PC and tablet in landscape mode it was far better than the other, but about oh 1/3 from the bottom of each page was cut. On the Tablet, I turned to portrait and voila full page. Woohoo! But alas, I don't want to limit it.

  is there something I am doing wrong? Did I miss a step or two somewhere so that the complete picture should appear on the page? I feel like I'm about to turn the page on this thing, but he's stuck in the one after that.

  I would greatly appreciate any insight, advice, help anyone can offer. I ran the gauntlet of Barnes and Noble... cough, cough... support and apparently I ask questions that cannot respond to any press corner rep and the forums out there have no idea about InDesign. It's almost like with all fantastic beautiful screens out there today nobody wants to picture books! How National Geographic?

  Thank you very kindly.

  In case it is necessary: my laptop using Window 7 64 bit Pro, InDesign CC is 64-bit and my 10.1 Android tablet. I can view the EPUB files in the corners for PC and Nook for Android. I also have a Kindle, LumiRead and various other applications on the tablet. I also have someone get a glimpse of the finished epub, if needed, on a Mac, iPad, or Android phone... even if I don't have not one of these. Don't know who has a corner I can look good. Thanks again.

  Q: is it possible to place an image at 100% without having to do this step further resizing?

  Here I think you want your images to fit within size full page automatically. For this, you can try the following steps:

  1. create a new doc

  2. menu Goto object, and then choose image mount options

  3. Select adjust automatically and fitting drowdown, select "adjust the content to the frame. See the screenshot below:

  

  After that, your images should adjust automatically in full page placeholder images. Please let me know if this does not work or if the problem you are experiencing is different and I did not understand your problem correctly.

  Kind regards

  POOJA

• Manual crimper create ePub files broken?

  Hi all

  I use ADE in order to test how my ePub files are rendered in different programs. To do this, I manually change the contents of the ePub files, compress, rename them, and then throw in ADE and stanza.

  So far I've failed once again in creating an ePub file that ADE renders correctly. I first thought the small changes in the file broken content, but the simple process to rename an .epub to .zip, decompression, re - compress (without modification) and rename then back to .epub product files ADE could not read: "the document seems to have minor errors that it may display incorrectly". For compression, I used the default method on Mac and WinRAR on a PC. Both of these methods did not work for ADE, but they did for Stanza.

  Somehow compress manually created files which are slightly different from the original ePub-files, but not so radically different that they violate in all readers; just ADE, it seems. Does anyone know what is causing this, and how can I solve this problem?

  The most common cause here, is that you have compressed the files of MIME type.  Spec, it must be first in the file and must be decompressed.

  I don't know how to do this with GUI tools, but you can find an explanation on the forums of the IDPF

• Problem creating an event in Final cut Pro

  Hello

  I am running Final Cut Pro 10.2.3.

  I created a new library, but when I imported my videos, then in a folder called "smart Collections".

  This folder has never appeared before.

  When I tried to create a new event, the clips remained in smart Collections folder.

  I couldn't tell the program to duplicate clips in the new event.

  What is going on?

  I deleted the new library and started again.

  I deleted the new library, restart Final Cut Pro.

  The problem persisted.

  Help, please.

  Guy

  When you create a library, an event is created as well as smart collections featured med goes into the event and can also go in smart collections. You can't have a library without an event which takes place in the media. Maybe you can post a screenshot of what appears in your browser.

• (BUG) Problem creating events of the calendar in the past (IOS 9.3.1)

  Recently, I get such a problem:

  1. I opened a last date in the calendar default ios

  2. create an event:

  -put the name of the event 'Accident '.

  -day 17 April 2016

  -start time 16:00 (end time 17:00)

  -all other attributes - default:

  calendar by default (have also 1 calendar personalized in a list)

  No rehearsal, no trigger time, no participating, call back in 30 minutes

  * a tried also the attributes of different event with the same effect. Didn't help not also choose my google calendar. tried several times)

  3. Press 'Add '.

  wait: event created, appears on that date and remains

  get: event appears and disappears in about 1 second

  What could be? Can help you with this? What IOS Bug?

  Creation of future events - no problem

  Settings - Mail, Contacts - synchronization scroll to calendars - events - How back does go - you may need to reset it to take account of the date that you set the old event from

• Problem creating recover DVD - Equium L350

  Please help, I just bought a L350 laptop and cannot create a recovery DVD.
  The writing of the DVD begins, and after 10-15 minutes the fails and I get the following message:

  The following question ccured while recoding data on the disk. A power calibration area error.
  Please, check if the disc is scratched or dirty, if so, please try again with a new disc. (error code: 0e01b5-26-00037304)

  Hello

  You get the power calibration error?
  Well, this error appears if the disk s lens may not calibrate properly in place.
  Above all, it occurs due to a mechanical problem s drive and in most cases, the CD/DVD drive must be replaced.

  On the other hand, the goal could not calibrate correctly using not compatible and not support CDs or DVDs.

  Have you tried burning different media from different manufacturers?
  If this is not the case, try this!

  Good luck