Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

Similar Questions

• I constantly problems while browsing with Google yahoo simply grab my research and won't let me come back to google. I have tried everything I can think

  This happening on my macbook pro and my I mack. Also on my PC but only on firefox.

  Hi TheJohnParr, to your Thunderbird (e-mail client) problem, I you suggest have another question for this, and we could concentrate on your Firefox search engine problem in this thread.

  You can view, disable and usually remove extensions on page modules. Either:

  • Command + shift + a
  • Tools menu > Modules

  In the left column, click Extensions. Then, when in doubt, turn off.

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

  Moreover, the address bar works a bit different in the search boxes (homepage search box or the search box toolbar). If you enter a single word without spaces in the address bar (for example, hobbit or mozilla.org) then Firefox should first check with your provider if there is a known server name. Sometimes, these queries are diverted by your service provider to show you search results. By comparing your search in the address bar and the search box, you can see if it comes to the question.

• Problem blackBerry Smartphones with ID of Blackberry Internet Service/BB Storm 2 9550 error messages

  
  

  Verizon?

  Have you tried to connect to your account from the PC BIS?

  https://bis.na.BlackBerry.com/HTML?brand=VZW&locale=en

• Should I have the Network Access Protection Agent Service to start automatically on Windows 8?

  Hello!

  While I was looking for a completely different setting in Control Panel in Windows 8, I came across the center of the Action settings and noticed that the Agent of network access Protection service is not running. I open the computer management snap-in and noticed that the service is configured by default must be started manually. I looked for more information on the internet but I wasn't able to find a detailed explanation about his goal for a personal computer. The only explanation I found applied only to Windows Server.

  Is it really necessary to configure this service to start automatically on a home network, or can it be just left set to start manually? What is its use on Windows 8? Is this just in case the computer needs to access a network of business domain?

  I am running Windows 8 Pro 64-bit edition on an Acer Aspire 5552-5898 connected most of the time in my network domestic, although usually I connect to public networks. My computer is not configured to connect to a domain on a corporate network, not even using VPN. When I access my e-mail from this computer company account, I first need to authenticate with a code provided by RSA device before I can connect to Outlook (OWA).

  See you soon!

  Carlos

  Hi Cspork,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  As I understand it, in the center of the Action the officer of Access Protection settings network service does not work.

  The network access Protection agent service collects and manages health information for client computers on a network. The information collected by the NAP agent are used to ensure that the client computer has the required software and settings. If a client computer is not compatible with the health policy, it can be equipped with restricted network access until their configuration is updated. Depending on the configuration of health policies, client computers may be automatically refreshed allowing users to quickly regain full network access without having to manually update the computer.

  The service can be left to be set to start manually.

  It is especially where the computer needs to access a network of business domain.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

  Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

  Hi heat110,
   
  -What is the brand and model of the router you are using?
   
  -You "Network Magic" software installed on your computer?
   
  Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
   
  Follow these steps to do the same thing:
   
  a. Click Start. Click run. Type Services.msc and press ENTER.
   
  (b) in the Services window, search for Pure Networks Platform service.
   
  c. right-click on the service and click on restart.
   
  d. restart the computer and check if you have got rid of the error message.
   
  Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.

• Try to uninstall Pure Networks Network Magic, platform Assistant works, how can I get rid of it, can not find in my system

  Have left nmrsrc.dll and 2 files nmspce2.dll.  Tried to delete it tells me that they are protected and hidden, do not know how to display them, nothing doesn't show in Add/Remove programs and windows search can not find them.

  PFure networks Platform Wizard keeps saying it has encountered a problem and needs to close, have removed the remaining files, but cannot get rid of these two.  What should do?

  Hello

  To view the files in XP follow these steps:

  a. in desktop screen click Start, then Control Panel, Panel Options.

  b. click on the view tab and check the box "see the hidden files and folders" and press OK.

  c. you will now be able to see all files and folders hidden on your computer. You can do a right click on the hidden folder and uncheck the hidden box and apply the changes to display it.

  See this article on how to uninstall Network magic: http://www.purenetworks.com/support/faq/13.html

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=104&VW=1&articleid=21926

  If you cannot uninstall the program, contact support for Network Magic team.

  Thank you very much for trying to help, find the files I had to remove, they do not delete found files in Mode safe and they deleted properly.  When I cliked show hidden and program files did not see them, Safe Mode works perfectly.  Good job!

• the pure networks platform service is not running

  I can't use my wireless card no matter what and this message

  You (or did you) a version of Network Magic installed?  Generally, the complete message would be:

  The Pure Networks Platform Service is not running
  Pure Networks Platform Service must run in order for Network Magic to function. If you have manually stopped or disabled the Pure Network Platform service, restart now.
  [2 links]

  See this FAQ: http://www.purenetworks.com/support/faq/195.html (the site can be slow to load)

  The Microsoft Windows Installer Cleanup utility is no longer available from Microsoft, apparently because it sometimes more removed he was supposed to.  You can always get it, however, here: http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  If you use the Windows Installer Cleanup utility, make a first Restore Point (or back up the registry with C:\windows\erunt).

  If you feel uncomfortable using CIP, download and use For free Revo Uninstaller to uninstall the same applications listed in the FAQ

  Personally, I'd skip step 3 "download Network Magic."  There is really no need for this application and, as you saw, it can cause problems.

• Error: "Pure Networks Platform service must leave" to start Windows XP.

  Original title: How can I fix Pure Networks Platform Service switch initially to the top.

  Using the window XP Pro when I start the computer I get a warning that Pure Networks Platform service must stop smoking.

  This product whenever I start the computer.

  How can I fix this problem myself.

  Hi KyleWilliams30655,

  You can follow this link & check if the problem persists:

  "The Pure Networks Platform Service is not running"

  However, skip the step 1 from the above link instead of as uninstall the following software from Add / Remove Programs:

  Cisco Network Magic

  Network Magic

  Pure Networks platform

  Speed meter Pro

  Hope the helps of information.

• 3rd party antivirus and antispyware not detected by Network Magic

  I have Norton Internet Security and PC tool Spyware doctor installed on my laptop.  The operating system is Vista 7 Home premium. 2 alerts magic network indicate that my programs antivirus and antispyware are disabled. These alerts refer to programs that come with the operating system.  It does not detect my software 3rd party programs that are running without any reported problems. Is there a fix in a way these alerts.

  Thank you.

• Network Magic with a Linksys WAG54G2

  I am trying to disable the network lock so I can uninstall Network Magic 5.5.9118.2 - Pure0. I can't do though, as he says that it cannot configure Network Lock on my router.

  My modem/router is a Linksys WAG54G2 (1.00.16 firmware version). I heard that it does not fully support Network Magic but I was able to turn on the last night the program of locking and security wireless network. What can I do now?

  Correction of the problem. Stop and restart the service of the platform solves the problem.

• Problem Driver network Dell Latitude E5570 with MDT

  We received a lot of laptops Dell Latitude E5570. I want to install a picture on them, using MDT. I downloaded the file CAB for Windows 7, A02 08/03/16. Added to the output of the drivers on MDT as usual, then updated the deployment share.

  When you try to start the installation, I get an error in the wizard. Connect to the deployment share could not be established. The following network device has not been installed, PCIVEN_8086 & DEV_156F & SUBSYS_06DF1028 & REV_21

  I tried download the drivers for the network card on the Intel site and their import. This time, I can access the task sequence list. There's nothing wrong with the first part of the installation. When it comes to complete the installation, I get the same error of Assistant on the network device.

  Any suggestions would be welcome

  I finally got mine work. Drivers is must always use a combination of the taxi driver from Dell and Intel driver. If the version 3 of the TAXI driver who has been published will solve the problem?

  I try to import the driver directly from intel first as well as the cab file and see if it works. This is the link I used: downloadcenter.intel.com/.../Intel-Ethernet-Adapters-Connections-CD

  In the end, I think that my question was due to the SSD and the fact that I tried to start Win 7 x 86.

  After reading a couple of different forums, it seems new SSD require UEFi start to run, which is not supported in Windows 7 x 86. I tried an image with Win 7 x 64 and it worked the first time.

• Problems of network with 715W

  For months (seems like years?) I had to power cycle regularly my printer, the PC and the modem/router to restore network connectivity.  More recently (now) connectivity is dead, even until I can't connect using a USB cable.  If I try to print a page of test via a USB port, it goes through the motions, pulling a page from the paper tray, abruptly resets and get the blank page on the output tray.  I tried without success with several resets of the router, different channels, power levels, etc.

  Anyubody other similar problems?  Of course, I had also just replace my black and purchased 2 new black cartridge and a color cartridge to avoid missing (victimized by this one at Christmas while they were not in stock!)

  After spending over an hour on the phone with Dell, call of the Canada, getting bounced to half a dozen different representatives in the United States and then back to the Canada even once, he ended it would cost more than a little troubleshooting only so buy a new printer (not DELL).  I managed to get a RA number to be able to return the cartridges, that I just bought.

  Then I called my provider I had problems last week with my network which I think might be related.  After about 15 minutes with them, they found where a framework had been modified caused place ended my problems.  Even if they are not 'officially' supporting printers, he worked through the configuration with me and you have my printer works again 100%.

• Network problems intermittent management with more than 1 works ESXi

  Hello

  I had problems since installation with our 2 x ESXi 5.5 nodes running on a Dell VRTX system.

  If I had to run 1 ESXi nodes on its own, it works perfectly, no problems what so ever, but as soon as I start the 2nd node they network for the management network connectivity problems.  However any virtual machine that you are running on them have no problem at all.

  The easiest way for me to check it comes to ping the management network and it will be on one of the nodes timeout, then it will randomly and knitting on this node but timeout on the other, they will never return a ping at the same time.

  
  If anyone has experienced this before? I fight to see if there is a problem with the installation on the ESXi hosts, the network Dell VRTX or our NetGear switch.

  I tried a lot of solutions and been through the different pages of VMware KB but can't seem to find something that suits him.

  The network Dell 8 physical ports are all in one LAG with 2 nodes added, I tried the distinct lag, but that made no difference, I am focusing now on if it is a parameter of VMware to see where that gets me.

  That's how the two nodes are configured.

  

  Solved!

  Finally, I spotted the problem, and VMware technical support fixed it for me.

  The MAC address of each management network was the same!, for some reason, the host of the 2nd got the MAC address of a NIC to host the premiere, don't know how its possible but VMware support restored all of the network settings from scratch and it picked up the correct MAC and works.

  Thank you all for your suggestions.

• Problems of network with Ubuntu 10.04

  Hello

  I've been running vmware on Ubuntu 9.04 for a while with no problems (host Ubuntu 64-bit with 2 guests, 1 32-bit Ubuntu and Ubuntu 1 64-bit).

  I've recently updated my Ubuntu to 10.04 and ran into problems with vmware, I followed the instructions here (http://www.marcosorfila.com/site/?p=380) and managed to get Ubuntu works with VMware 2.0.2 and my guests are here. Everything starts fine, except that I got the Firefox issue with the console. To work around this problem, I can connect to the console using my computer laptop windows and Internet Explorer, so I'm happy on this front

  My network uses NAT and it worked well with older versions. If I connect to the console on two comments I ping the host or guest, but for some reason, my host cannot see my guests. I spent the last 3 days, google search and I can't find anything to indicate how to solve this problem. The two guests are versions of server with no windowing capability and I normally rely on ssh access from the host, but it does not work either.

  My host is using a wireless internet network interface and this includes the IP 192.168.1.3, subnet of VMware is on 192.168.194.x

  Can anyone offer any advice to get access to my guests from the host?

  Thank you

  Klunk

  I managed to find a solution to this. I need to use a patch different than I used initially. Details can be found here.

  http://UbuntuForums.org/showthread.php?t=1473373&highlight=VMware+ping

• problems of network with Vmware workstation 6.5.0

  version of Workstation 6.5.0 - 118166

  I have two virtual machines W2003R2 and W2008r2 in a physical host with Windows XP Edition family.

  The network configuration is in Bridge mode the two.

  No dynamic IP for both.

  Physical PC1

  W2003R2: W2008R2

  IP: 172.17.0.1 IP: 172.17.0.2

  Mask: 255.255.0.0 mask: 255.255.0.0

  No gateways.

  DNS: 172.17.0.205 DNS: 172.17.0.205

  And a virtual W2003R2 on another physical machine.

  Physics PC2

  W2003R2: (is a domain controller)

  IP: 172.17.0.205

  Mask: 255.255.0.0

  No gateways.

  DNS: 172.17.0.205

  Two physical machines have connectivity, no problem, Pc1 and PC2.

  Virtual machines have two connectivity with DC IP 172.17.0.205 and also DC for two machines, nslookups works OK.

  There is no ping between machines on the physical PC1 comments, well not exactly I have ping of W2008 in W2003 but not for W2008 W2003, there is no firewall and no antivirus, no, default configuration, I tried to uninstall W2008 and install the other W2003 and no results, so there is no problem of OS Windows.

  I'm trying to change the configuration of the network, tried to bridge, host, nat, custom, I tried vmware workstation version 6.0 and 6.5.3 and don't find any solution.

  Any ideas?

  Is there any antivirus running on the guest operating system?

  [

  | http://linuxgurus.wordpress.com]