Problem filling tabnavigator with returned data

Similar Questions

• There is a problem of storage with the data path [path to hard] store

  I have two sites connected by using a VPN connection over a WAN link. In each site, I have an esxi with several VMS host and operation of replication device of vSphere (v 5.1.1.0 Build 1079383) in each site. In each site, these is also a vCenter server with the device of RVS registered and logged with the other site. All the virtual machines are configured to replicate to the other site.

  In my initial configuration of the RV (first install) site remote had 2 vNIC used for the management and I figured it was my problem with replication (see kb2040302). So I have changed since my host configuration from the remote site to have that single vnic management (does not solve the problem). I then registered, removed and reinstalled the VR device without change to the problem.

  What is going on:

  1. I am able to configure replication between sites without a problem.

  2. first replication occurs between sites and reports a success.

  3. the remote VM replication to the main site continue to work properly and all is well for the days and continue to work.

  4. the main site of VM replication to the remote site fails on the second and all attempts to reproduce the error. There is a problem of storage with datastore path '[datastorename] '.

  

  I followed the advice of kb2040302 better as I can. But I must confess that I could use some of the more detailed instructions on how and what site should I check the logs. and how to check my configuration management vnic.

  I'm looking for someone provide additional troubleshooting steps with good detail.

  Thank you

  
  

  Resolution:

  The problem was caused by a security setting on the NFS Server data store. VRA could not delete the (hard).

  Specifically, my problem was with authorizations on the Synology NAS under the application of the "file Station.

• Fill ComboBox with XML data

  I would like to fill a ComboBox with data in a simple xml file like this. It's probably quite newbie question, but I couldn't find the answer to the search in this forum and the documentation up to date.
  
  
  < root >
  option 1 < item > < / item >
  option2 < item > < / item >
  Option3 < item > < / item >
  < / root >
  
  
  I would be very grateful if someone tell me how the ComboBox control to retrieve data from XML file. Thank you!

  I found a way to do it. Here is the code I use to populate a ComboBox control with dynamically loaded XML data (the XML content is in the first post).
  I'm sorry that I have opened a topic for this fundamental question. In any case I hope that the thread is useful for someone. If you think that there is something wrong with the code below, please post a reply.

  
  
  http://www.Adobe.com/2006/mxml"creationComplete ="parseXML (); » >

  
  

  public var myXML:XML
  public var myLoader:URLLoader

  function parseXML (): void {}
  myXML = new XML();
  var XML_URL:String = 'content.xml ';
  var myXMLURL:URLRequest = new URLRequest (XML_URL);
  myLoader = new URLLoader (myXMLURL);
  myLoader.addEventListener ("complete", xmlLoaded);
  }

  function xmlLoaded(evtObj:Event):void {}
  myXML = XML (myLoader.data);
  combo.dataProvider = myXML.children ();
  }

  ]]>
  

  
  
  

  
  

• Fill ComboBox with external data

  I have this drop-down list box:
  
  < mx:ComboBox change = "changeEvt (event)" x = "134" y = "48" > "
  < mx:Array >
  < mx:Object label = 'AM' data = 'ALL' / >
  < mx:Object label = "BM" data = "CM" / >
  < mx:Object label = "CM" data = "FROM" / >
  < / mx:Array >
  < / mx:ComboBox >
  
  I would like to do this fill a XML file, for example I import
  
  < empTypes >
  < laborClass lc = 'AM' <>/.
  < laborClass lc = 'BM' <>/.
  < laborClass lc = 'CM' <>/.
  < / empTypes >
  
  .. .in an XMLList, named said "empTypes" what is the syntax I use for this insert in the comboBox? I don't know how to do so that he can enter.
  
  M.

  I changed it to filter1=event.currentTarget.selectedItem.@lc; and that the time seems to work :)

• Fill ComboBoxes with some Date Formats

  Hello, I need to show the day, month and year in three separate ComboBoxes for my project. Is it possible to combine and concentrate all ComboBoxes together?  For example, I want to get all the values for the Date of the birth of three days of combo boxes, month and year.

  Can someone help me please?

  If you want your users to select date, month and year of your 3 comboboxes?  If so, you can use the following syntax and access the properties of the 3 comboboxes selectedLabel:

  Import fl.data.DataProvider;

  import flash.events.Event;

  var month is ["jan", "feb", "mar", "Apr", '' may '', "jun", "Jul", "aug", "sep", "oct", "nov", "December"];.

  var dp:DataProvider = new DataProvider (monthA);

  monthCB.dataProvider = dp;

  var dataA:Array = [];

  setDatesF (31);

  function setDatesF(n:int):void {}

  for (var i: int = 1; i<=n; i++)="">

  dataA.push (i);

  }

  DP = new DataProvider (dataA);

  dateCB.dataProvider = dp;

  }

  var yearA:Array = [];

  for (var i: int = 1900; I)<2100; i++)="">

  yearA.push (i);

  }

  DP = new DataProvider (year);

  yearCB.dataProvider = dp;

  monthCB.addEventListener (Event.CHANGE, monthF);

  function monthF(e:Event):void {}

  var d: Date = new Date (yearCB.selectedLabel, 1 + monthA.indexOf (monthCB.selectedLabel), 0);

  setDatesF (d.date);

  }

• [Explanation necessary] Clears the listview data and fill it again with new data

  Hello

  I correctly filled a listview in c ++, data analysed and does interesting things with it. However, I am drunk stumbling, unable to find a way delete and repopulate my display of the list...

  Question 1:

   

  1. How can after I insert data in the list view, I clear the list data and run again the same method (init) who populated the list view with the data in the first place?

  Here are the docs that I referenced and I don't understand how to implement the methods in my code.

  QList - clear() method

  https://developer.BlackBerry.com/Cascades/reference/QList.html#clear

  Using the data access Code, example
                            data_access/using_data_source

  GroupDataModel - Clear()

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__groupdatamodel.html#clear

  CODE
  
  Here is my code - filling of the display of the list of C++ and display of data in a ListView.

  MyApp.cpp

  MyApp::MyApp(bb::cascades::Application *app)
  : QObject(app){
      // create scene document from main.qml asset
          // set parent to created document to ensure it exists for the whole application lifetime
          QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
              AbstractPane *root = qml->createRootObject();
              qml->setContextProperty("yoyo",this);
              //grab references
              list_view = root->findChild("listView");
  
              // set created root object as a scene
              app->setScene(root);
  
              mNetworkAccessManager = new QNetworkAccessManager(this);
              bool result = connect(mNetworkAccessManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(requestFinished(QNetworkReply*)));
  
               Q_ASSERT(result);
               Q_UNUSED(result);                 json = new QFile("data/file.json");
  }
  
  void MyApp::init(){
      QNetworkRequest request = QNetworkRequest();
       // i call some service here
       mNetworkAccessManager->get(request);
  }
  
  void MyApp::requestFinished(QNetworkReply *reply){
      qDebug() << reply->error();
      qDebug() << reply->errorString();
      if (reply->error() == QNetworkReply::NoError) {
          qDebug() << "No error";
  
                  QByteArray data = reply->readAll();
  
                  if (!json->open(QIODevice::ReadWrite)) {
                      qDebug() << "Failed to open file";
                      return;
                  }
                  json->write(data);
  
          bb::data::JsonDataAccess jda;
          QVariantMap results = jda.loadFromBuffer(data).toMap();
                  QVariantList lst = jda.loadFromBuffer(data).toList();
              GroupDataModel *m = new GroupDataModel();
                     m->insertList(lst);
                     m->setGrouping(ItemGrouping::None);
                     if(list_view) list_view->setDataModel(m);
  
      }else{
          showDialog("Boo",reply->errorString());
      }
  }
  

  MyApp.hpp

  // Tabbed pane project template
  #ifndef MyApp_HPP_
  #define MyApp_HPP_
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  namespace bb {
  namespace cascades {
  class Application;
  }
  }
  namespace bb {
  namespace data {
  class Application;
  }
  }
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class MyApp: public QObject {
  Q_OBJECT
  public:
      MyApp(bb::cascades::Application *app);
      virtual ~MyApp() {
      }
      Q_INVOKABLE
      void init();
  private slots:
      void requestFinished(QNetworkReply *reply);
  private:
      QNetworkAccessManager *mNetworkAccessManager;
      QNetworkRequest *request;
      QFile *json;
      bb::cascades::ListView *list_view;
  };
  
  #endif /* MyApp_HPP_ */
  

  hand. QML

  import bb.cascades 1.0
  
  Page{
  Container {
                          background: Color.White
                          ListView {
                              id: listView
                              preferredHeight: maxHeight
                              objectName: "listView"
                              listItemComponents: [
                                  ListItemComponent {
                                      type: "item"
                                      Container {
                                          Container {
                                              Label {
                                                  text: ListItemData.id
                                              }
                                          }
  
                                      }
                                  }
                              ]
                              onTriggered: {
                                  console.log("selected_index: " + indexPath)
                              }
                              horizontalAlignment: HorizontalAlignment.Center
                              verticalAlignment: VerticalAlignment.Center
                          }
  
  }
  }
  

  Question 2:

  How reference to the ListView object with the name "listView" in different parts of the MyApp.cpp file? Is there anything else I should add to the header file to make the accessible listView?

  Question 3:

  What happens when you call the clear() method? How the data model is affected? How the user interface is affected? What happens in memory?

  Question 4:

  How do you verify that the data in the list has been deleted so that you can go ahead and fills again with new data? What is the cheque that I perform?

  I would also like to know how you manage multiple views of lists and data sources in your applications. Best practices or ideas?

  Thank you
  

  I was able to clear the listview with the following code, if anyone is interested.

  listView.dataModel = null
  

  The dataModel must be set to "null".

• How to fill the DataGird with the data returned by the php page?

  Hi, I'm new to Flex, I try to fill DataGrid with data from PHP, my code is

  < mx:HTTPService

  id=" personRequest = URL "result ="getPerson (event)" http://localhost/searchPerson.php " useProxy = ' fake "method =" " POST "

  showBusyCursor ="

  true "resultFormat =" " E4X " >

  < /.

  MX:HTTPService >

  < mx:DataGrid

  id=" searchResult " " dataProvider =" {? what to paste here? } }" y="30"

  >

  < / mx:DataGrid >

  .....

  private

  function getPerson(evt:ResultEvent):Sub { }

  var res: XMLList = evt.result... Dane as XMLList;

  search results =

  new (Res) XMLListCollection;

  }

  ....

  output of PHP

  < person >

  < dane >

  < name > CBA < / name >

  < Street > XLXXLX < / street >

  < / dane >

  < dane >

  < name > DEF < / name >

  < Street > CIWU < / street >

  < / dane >

  < / person >

  If I set the dataProvider as search results "" it doesn't work. I have probably set all collection ArrayCollection as a dataprovider, but I don't know how to convert my XMLListCollection for her.

  Could someone help me complete Datagrid with

  name | Streer

  ABC, XLXXLX

  DEF, CIWU

  Best regards

  Mariusz

  
  
  
  
  
  
  
  
  
  

  After the datagrid control, you post the above code.

• It is no longer possible to fill in the field "year" (Dutch: "jaar" with a date "1600" or an earlier version.)

  I used to fill in the field "jaar" with the date of origin of a piece of classical music. Many years before 1600 original parts. I spent many hours to fill the years because I have som 35000 tracks in my library. 2015 they was tgo is no longer possible to fill a date prior to 1600. Even worse: all already filled dates are missing.

  I ask reinstall the opportunity.

  lvhout wrote:

  I used to fill in the field "jaar" with the date of origin of a piece of classical music. Many years before 1600 original parts. I spent many hours to fill the years because I have som 35000 tracks in my library. 2015 they was tgo is no longer possible to fill a date prior to 1600. Even worse: all already filled dates are missing.

  I ask reinstall the opportunity.

  Lvhout,

  You seem to be the first person to notice him, but I just tried with iTunes 12.3.2 and found the same problem.

  You can send comments directly to Apple at this link:

  http://www.Apple.com/feedback/itunesapp.html

• Problem with field date

  Hello
  I have problems with the dates. I have a datagid which fills the XML values. Some examples of dates in the xml document.
  (1) 2008-08 - 05T 00: 00:00Z
  2) 2008 - 07-22 T 00: 00:00Z
  (3) 2008-08 - 04T 23: 00:00Z
  4) 2008 - 07-11 T 11: 18:20Z
  
  I have the function that is called when an element is clicked on the data grid. This function is supposed to take the above date and the date of the datefield in a summary Panel. I continued to get xmllist@23232 to date conversion error if I tried to bind the property of selectDate datefield in dataGrid value.
  
  I've seen examples of datefield defined using a date object. So I stored the date above in a string. Screens of the string data fine only thing is a the componenet (T) of time as well. So I split the string using the string to split the function and the use of "T" as a separator. The problem is the 2nd and 4th dates in the above examples worked well and display perfectly in the datefield.
  
  The 1st and 3rd dates however wrongly displayed. I've posted the table stored items from split, which found that the date of the first one 2008-08 - 05T 00: 00:00Z rose in 2008-08-06 instead of on 2008-08-05
  and for 2008-08 - 04T 23: 00:00Z rode in on 2008-08-05 instead of 2008-08-04. I checked the string that was storing the data grid data and who has been properly storing the value.
  
  any suggestions?
  
  see you soon
  Aerts
  

  sorted,
  lacked a bit of caffeine. I had another string of storing a value different date and because of my stupidity, I tried to parse this string and get the two different dates.

  see you soon
  Aerts

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• Problem when creating a report with a date of schduled

  When I tried to create a report with a schedule (any option except now) I get the error 'Date of the first report occur must be after or equal to the current date", unless I have use a date of 01-10-2012 or later in the first report occurs on the field.  Current date is 2012-08-23.

  Let me know if you can recreate it and if or when there is a fix.

  Hi Tim,.

  We have fixed the problem now. Could you please check that you are able to schedule a report now with start date of today?

  Thank you

  The OnPlus team

• Passport problems of blackBerry with date and time on the passport of Blackberry

  Hello!
  I have problems with my passport for Blackberry.
  For the couple in a day time, it changes itself. So my hub doesn't work, I get no new messages, I can't send messages! The last time I did correct settings did not help. If everything is correct or hub or messages do not work. I tried to make different adjustments, tried to restart the hub, tried to restart the phone. but it does not work. I really need your help because I can't use my phone and nobody can connect with me.
  I didn't drop the phone. I know that these problems are related to the date and time because since the first problem with hub and messages has occurred, I saw that the date and time were bad, changed to correct and everything went well. I don't understand why he doesn't now. Can you tell me what to do?
  OS 10.3.2.2836
  1 January, I received this phone and it worked allright until some of the OS updates, can't tell which exactly because I have auto update.

  For those who have the same problem: I deleted the contact of my mother on the phone. I deleted the messages displayed as January 27, then I added my mother to local contacts and new messages started coming

• Problem with Capture Date &amp; time change

  I just became aware of a problem with the Date of Capture use to is very strange. Initially, a brief explanation of the import workflow I'm used with jpeg image 6 iPhone since Lightroom Mobile was presented. The images appear in the section of times iPhone app Photo, and from there I transfer to a collection in Lightroom Mobile. Once the collection syncs to Lightroom on my Mac (running latest El Capitan), they sort by capture time and I make choices and rename images. I have a naming preset that adds automatically the date to all the images. Recently, I noticed that some of these images, but not all, have been appointed with the wrong date. I had traveled without my computer - only my iPad, and it was a month before the images have been synced on my Mac it was very obvious that the dates were incorrect. The problem may have expressed earlier, but if the date was off by a day or two he would not have been as sensitive.

  The problem occurs when I take pictures with the app in time of MomentLens company. I use the application because it is designed to work with instant attachment lenses and the case of the Moment (which makes no difference in time to capture problem).

  
  

  Once that the images are added to LR Mobile news for images show good capture date and time. That's when they images sync for LR (latest version) that the problem occurs. And this is not a problem of LR Mobile, such as changes of date and hour occur if images of the iPad are added to LR without using mobile LR (from the iPad to Mac with AirDrop). Looking at the EXIF metadata Panel in LR, images taken with the iPhone camera app show three dates: Date time Original Date time digitized and Date time - all the which three are the same. Show only pictures taken with the application of the time Date time, but it's the same as in the iPhone Photo app and in LR Mobile capture time. However, when I show info on imagine in Lightroom, the time that appears to capture the time is the time that the image has been synchronized (if it came at LR Mobile) or the time that the image has been added to the iPad over wifi. It is also the time that is added to the preselection of naming. Note that if I send a picture directly from the iPhone to the Mac with AirDrop the date and time is correct.

  For the life of me, I can't understand this anomaly. I did thorough Imaging tests, and it happens only with the application of the time - other camera apps do not exhibit this problem. Interestingly, LR recognizes both the time Soft, which is reported under EXIF on the range of software and the lenses of the Moment when it is used with the iPhone the Moment case.

  If anyone has any ideas I'd be pleased to entrance. Thank you

  The link to the file is Dropbox - Photo of the Moment

  I have just confirmed with Exiftool that the sample file does not EXIF:DateTimeOriginal, although it does not contain EXIF:DateTime.

  You can send the following to the current time, the EXIF 2.3 specification:

  

  

• How to fill a field of date with today's date when the signature field is signed?

  How to fill a field of date with today's date when the signature field is signed? In the LCD, I insert a signature field and a date field, what parameters in these two fields are necessary to make this work? Is the date field, the value calculated? I tried different JS suggestions I found, but none work. In the form, I named the signature ClaimSignature field and the date in the ClaimSigDate field.

  The thought of her with a little help. In the script editor window, I selected the postSign event and added the following JS:

  Form1.Page1.ClaimSignature::postSign - (JavaScript, client)

  var date = new Date();

  var day = date.getDate ();

  var month = date.getMonth () + 1;

  var monthstring = (month, 10?) ('0' + month: month)

  year var = date.getFullYear ();

  var = year DateString + '-' + monthString + '-' + (day< 10="" "0"="" +="" day="" :="">

  ClsimSigDate.rawValue = dateString;

  I hope this helps someone else save time.