Problem finding tables of project and the repository working interface

Similar Questions

• project and the strange behavior of FPGA v

  I had a strange problem with my main project and the FPGA inside screws.

  It seems than a recent revision/replacement of a part of the code (replaced subVIs with the latest revisions with different names) prompted the VI to load screws unused when I save it.

  The story gets more strange because I can create a totally blank FPGA VI within the project and it still load the same SubVIs when I save it.

  I can save repeatly the VI and the same (now nonexistent) subVIs will be charged each time before the economy can complete

  The SubVIs are not displayed in the VI hierarchy and are no longer in the project at all - but are always loaded by a VI that does no resemblance or relationship to the original VI.

  Is my project completely broken?

  If Yes is there a way to fix without starting from scratch ?

  Thanks for any help in advance

  Dan

  you have a screw under the fpga target who could still make reference to the missing subvis? If the project think that you still have a dependency on these missing subvis, they will appear (with a warning that I think) to under the item "dependencies" of the target fpga. When you save a vi in the context of fpga, labview support the other screws in the same target to ensure they are still valid and up to date of the accounting information. If you have any other screws which are still divided on disc (even if they set up on top of the load), you will have to wait until they take whenever you save the vi in question.

• Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  The family of products Acrobat 9.x passed in mid-2013 "end of Support".
  Using Acrobat 9 of MS Project via PDFMaker stops with Office 2007.
  To 2013 Office support, you must use Acrobat XI (11.0.1) or newer.

  A good reference:
  https://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

  Acrobat Pro and Standard DC are what are currently available for purchase.

  Be well...

• Presario cq61: I have athe same problem I'm presario cq61 and the error is 55067138lunch

  I have athe same problem I'm presario cq61 and the error is 55067138

  @hatchethouse

  Enter: 40945118

  Kind regards

  DP - K

• Table of clusters and the cluster is a bar counter, how can I change the color individually?

  Table of clusters and the cluster is a bar counter, how do I change the color of the bar individual meter for each element of the array?  I just realized that you cannot change the properties of an element of the array without changing everything.  For scale, I had to make digital for each graduation of the scale indicators so that each measure meter in the table in the cluster has individual scales.  I also had to do some calculations for each barmeter to display the correct proportions of 0 to 100% on the scale.  Now, I'm stumped on the color of the bar counter.  Basically, if the value exceeds a set value, the meter bar should turn red.  It must be in a table to be infinitely scalable.

  Thank you

  Matt

  And yet anothr approach...

  Right click on the bar of > Options to fill > maximum fill.

  

  The fill color of the same color as the background color, then make the background color transparent.

  Drop a box of color BEHIND the bar and the size correctly.

  He has this strange background 3D with flat bar, but what the Hey, his relatives. If its important a custom color box.

  Ben

• Having a problem with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular.

  I recently tried to remove malware on my Vista based laptop Toshiba.

  
  

  I recently tried to remove malware on my Vista based laptop Toshiba. Malwarebytes helped, but I still have problems with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular. I tried to download from a copy of the USB stick to a clean computer, but he still refuses to load telling me to check my internet connection, which is fine for general use. Please help I get crazy and do not forget that I am a pure layman - thank you if you can help - Kidso

  I found that the best place to ask this type of question is here: -.

  http://forums.ComputerActive.co.UK/forumdisplay.php?f=20

  There are some very good people out there who helped me (successfully) on 2 occasions.

  Good luck.

  I'll be interested to know how you go.

• I hit a button on the accident and lost my bar with my open projects and the bar to maximize reduce it and close the program, I don't know what buttons to press to get back them

  Just like the post said.  I accidentally fat fingers and when I did I lost my navigation bar that has my open projects and the outline view bar that allows you to minimize, maximize, and close Adobe.  Any help yall could give would be great.

  Press the F button to change the workspace or the Tab key to leave the rear panels.

• Problem with styles of framework and the paragraph of text

  I have a book with a number of documents in it. In one of the documents, there is a problem with blocks of text and paragraph styles. When I create a new text frame, text in it and apply a paragraph style, the style does not apply correctly. Elements of applied and others do not. For example, bullets and numbered lists apply but italic, and font size are not. It only happens with new blocks of text, and the oldest work very well.

  This does not happen in other documents, just one.

  The book is properly synchronized and synchronization options include all options.

  Check your panels styles, paragraph, character and the object with nothing selected. If there is an already established style name, and I think that it would be in the Panel character styles, that's your problem.

  Bob

• Problems with sorting of columns and the number of lines in the report

  Hello
  
  I'm having a problem with sorting of columns and the number of lines displayed in a report.
  
  This report displays the data correct, but if I try to sort on a column when I click on the column heading in the report returns no line... I need to click on the "go" button to refresh the report (with the column sorted now) in to display the data.
  
  Similarly, I display only 15 lines per page. If I try to view the lines 16-30, 31-45, etc., that it returns no line until I click on the 'go' button to refresh again.
  
  Has anyone else had (and overcome) the same problem?
  
  Thank you
  
  Joseph

  Joseph,

  2 questions:

  1) are you using the elements referenced by the report page to filter etc.. ? If so, you're failing values of these when the loading of the page?
  (2) are you using PPR page through the results?

  If so, it could be a problem with the different types of session state, as Anton Nielsen blogged about here:
  http://c2anton.blogspot.com/2008/12/Oracle-Application-Express-Apex-three.html

  If so, you can use calculations or processes to set element values in session state persistent during page rendering, as Anton mentions. In this way, when you use PPR page values will be available in session state and your report should work fine.

  Anthony.

• installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  installed a keyboard and wireless mouse and the mouse works fine, but the keyboard types the wrong keys! Any ideas? Thank you

  Wired or wireless - is usually not serious unless the wireless can get more interference.  If the keyboard is close to the receiver which is connected to the computer and you get the strikes hurt - my suggestion is to try first the keyboard on another computer.

  To do this, * not * require you to install specific drivers.  Simply unplug the combo of a computer and in the other and see if the keyboard works correctly.  Then, you can troubleshoot from there.

• Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Problem with directinput in dxdiag and the launch of the games

  I recently started having problems with launch of some games.  Two games, at present, are 'Black hawk down' and 'Dead space '.  When I run Dxdiag I get a direct entry access error.  If I click on 'no' in the pop-up window that dxdiag errors access to direct entry, my dxdiag crashes with report error to microsoft.  I think the two are connected.  I have reinstalled/updated all the drivers of sound, graphics and system nothing helps.  When I try to do the webinstall of directx, I get the message that it has not updated.  All devices works fine.

  Any help would be appreciated and thanks in advance for any help offered.

  Lee

  Home Win XP - SP3 - completely up to date, Phenom II x 4 3.1 GHz, 4 GB ram, radeon hd5670 1 GB, onboard sound.

  Managed to find out what was causing the problem.  I have a USB stick electric meter reader.  It blocks somehow the directinput do some games unplayable and the origin of the problem of dxdiag.  If anyone has a similar problem then I suggest to each of your devices USB, one at a time, unplug and see if the problem goes away. If you think that my answers are useful please vote and mark as a possible answer. Thank you.

• Problem with FWSM and the same L3 interface switch

  I have two 6513 s with a 802. 1 q trunk linking them. Each switch is redundant Sup720s running in native mode, worm IOS 12.2 (18) SXF (that they were running out of SXD3). A FWSM (ver 2.3 (3), routed mode, unique context) is in each switch, Setup in failover mode.

  I can't get a PC in a virtual LAN that has the defined layer 3 interface on the switch with the active FWSM in this document, to communicate with the devices 'behind' the FWSM. If I move the configuration of layer 3 to this vlan to the other 6513, everything works fine.

  The MSFCs are inside the firewall, they have a configured layer 3 interface in the same vlan as the FWSM 'inside' interface. Several "same security level" interfaces are defined on the FWSM and used to protect the farms. I use OSPF on the MSFCs and FWSM and the routing table is correct.

  The FWSM generates connections to the attempts made by the PC with interface layer 3 defined on the same switch as the active FWSM very well, so this isn't a problem with FWSM ACL.

  A ping of the FWSM "inside" interface from a PC with the defined layer 3 interface on the same switch as the active FWSM fails, although debug icmp trace on the FWSM demand and response shows. A the packet capture, using the NAM-2, only shows the request packets. I captured on the vlan common and FWSM port channel interface bottom of basket.

  Just to add to the confusion, if I capture in the same places, but do the ping of a PC which is in a VLAN with the interface of layer 3 defined in the 6513 which does not contain the active FWSM, that works very well, I see the request and response on the capture of vlan common, but only on demand on the capture of the port channel.

  This problem has been there since the beginning of this implementation and has not changed with IOS and FWSM software upgrades. I had this experience with all the VLANS that I tried to define the interface of layer 3 to on the switch with the active FWSM. I turned on MLS.

  If anyone has experienced this and solved, or knows what is happening, I would be grateful for any ideas.

  Thank you.

  Keith

  Keith, are you running etherchannel distributed on of your 6513?

• Problems when views containing subqueries and the parentheses of engineering reverse

  I am running questions when using Data Modeler to reverse engineer Oracle views.  A problem occurs if the SQL view contains a subquery, one more question if the SQL view contains parentheses more than necessary.  Unwanted results include: views not valid, the main request being removed from view, leaving just the subquery, the schema name be stripped from the SQL and produces an error when testing the query and the view SQL completely deleted/ignored.

  Thanks in advance for your suggestions.

  Environment:

  Version 4.0.2.840 SQL Developer Data Modeler, build 840

  Running on Windows 7 Professional SP1

  Oracle Database 11.2.0.4, running on Oracle Exadata

  Steps to reproduce:

  1. the installer for the test:

  Create table 1A. for points of view

  CREATE TABLE test

  (col1 VARCHAR2 (10))

  Col2 NUMBER

  col3 DATE

  );

  1B. create a view with a subquery and parentheses "extra".

  VIEW to CREATE or REPLACE test1a

  AS

  (SELECT * FROM biuser2.test WHERE the col3 =)

  (SELECT MAX (test.col3) FROM biuser2.test

  )

  );

  1 create a view with a subquery, without the parentheses 'extra '.

  VIEW to CREATE or REPLACE test1b

  AS

  SELECT * FROM biuser2.test WHERE the col3 =

  (SELECT MAX (test.col3) FROM biuser2.test

  )

  ;

  1. create a view by specifying different column names, followed by parentheses 'extra '.

  VIEW to CREATE or REPLACE test2a (vcol31, vcol32, vcol33)

  AS

  (SELECT col1, col2, col3 FROM biuser2.test

  );

  1. create a view by specifying the names of different columns, without the parentheses 'extra '.

  VIEW to CREATE or REPLACE test2b (vcol31, vcol32, vcol33)

  AS

  SELECT col1, col2, col3 FROM biuser2.test

  ;

  2. run Data Modeler (stand alone, although the built-in SQL Data Modeler developer seems to work the same)

  Import of data, including the test table and all dictionary the views of trial 4.

  Any import, all 4 views have yellow triangle! icon indicating the points of view that must be analyzed, Parse old views of Style.

  3. right click and select "Parse of old views of Style" for each of the 4 views.

  Status of views are now:

  TEST1A: red triangle! icon

  TEST1B: disabled icon

  TEST2A: still has the yellow triangle! icon

  TEST2B: disabled icon

  TEST1A 4A.

  Right-click, selected Validate views has no effect.

  Examine the properties TEST1A

  Examine the query Query Builder

  Warning window will appear: parse error: could not parse the SQL query. Invalid SELECT statement. Unexpected token ') "in line 2, pos 7

  Click ok, the displayed query is:

  SELECT MAX (test.col3) OF biuser2.test

  )

  )

  Result of 'test the query.

  SQL:

  SELECT MAX (test.col3) OF biuser2.test

  )

  ^

  )

  Error at line 2, column 6:

  ORA-00933: SQL not correctly completed command.

  TEST1B 4 b.

  Examine the properties TEST1B

  Examine the query Query Builder

  displayed query is:

  SELECT

  TEST. COL1,

  TEST. COL2,

  TEST. COL3

  Of

  TEST

  WHERE

  TEST. COL3 =

  (

  SELECT

  MAX (TEST.) COL3)

  Of

  TEST

  )

  Results of 'test the query:

  SQL:

  SELECT TEST. COL1,

  TEST. COL2,

  TEST. COL3

  OF THE TEST

  ^

  WHERE TEST. COL3 = (SELECT Max (TEST.) (COL3) TEST)

  Error on line 4, column 5:

  ORA-00942: table or view does not exist

  Preferences for the Data Modeler: DDL: include the defined schema in DDL

  Note that BIUSER2 schema name was stripped from the SQL

  4 c. TEST2A

  Examine the TEST2A properties

  Look at the generator query of query

  No SQL appears

  Results of 'test the query:

  Nothing, if you use "test application" of the display properties window.

  Query executed successfully, so by clicking the green checkmark in the query designer window

  4 d. TEST2B

  Examine the properties TEST2B

  Look at the generator query of query

  displayed query is:

  SELECT

  TEST. COL1,

  TEST. COL2,

  TEST. COL3

  Of

  TEST

  Results of 'test the query:

  SQL:

  SELECT TEST. COL1,

  TEST. COL2,

  TEST. COL3

  OF THE TEST

  ^

  Error on line 4, column 5:

  ORA-00942: table or view does not exist

  Hello

  It seems that the problems with validate selected views and Parse old views of Style both TEST1A and TEST2A occur as a result of the view being defined with the SELECT initial placed in brackets.

  I logged a bug about this.

  Regarding the result of your Test request, you should be able to get this works using a connection that uses your username biuser2.

  When the Test Query window, you must set the login field at the top of this window to your biuser2 connection.

  In the case of TEST2A, it has "successfully" carried out an empty SQL string!

  David

• How to organize the project and the files associated with the Premier Pro

  I tried to hold the input and output files to the Premier Pro (body) to optimize PC speed and keep different projects in separate folders.

  To optimize speed, I try to balance the I/O to the body on different drives. I'm editing on a dedicated PC i7 - 3930K, OS W7, 32 GB of RAM, with 2 SSD and 7200 4 discs arranged in 2 RAID 0.  A SSD (C drive) contains the files program, Documents, Photos and Audio.  The other 3 are used to store the video media.  The second SSD is used for the Cache and editing intermediate files. A RAID contains the video and audio Source, the other RAID files, export files.  I try to balance the input/output between readers.

  To organize files, I try to place each project with its related assets in a separate file.  In Production Premium CS6, default organization of the C:\Documents\Adobe\6.0 projects.  I'm confused because when I put Destination project in the project manager to another location, it always end up in the default location.  To change the location of the project, I find that it is initially allocated to the default, then I manually move it to another folder.  After you restart the body I open a project in the new folder.  Even though I have been editing for many years, I do not edit full time, so I need to refresh my knowledge for the fair distribution of the files such as the Scratch disks...

  To make life interesting, different programs spread differently.  Mocha, the project folder and the default output to the same location.  I found Mocha has a project and output destination allocation of menus that once I put them in different places always end up together.  I was advised to change the location of the moka project as I do with the body, but nothing has changed.  Speed and coordination PC file locations is a challenge.

  I have reviewed the training locations in the body.  Please direct me to the training to refresh my understanding on how correctly assets and distribution projects in the organization.  I also want to understand all the terms and possible menu assignments, if training is available.  A video presentation is preferred.

  The 'libraries', never use integrated in Windows. Those who are buried on the C drive in a rat hole of a tree of files to implement for backup and everything. Really, quite a stupid implemented well. And having the documents on your system drive is very well... doesn't really matter, those not need for speed of access. Put YOUR assets, such as pictures, images, graphics and stuff, in the folders that you create on the drives for them to the best "work" for you.

  So anything I have listed (quite well off of the page of this Tweaker) interferes, or interfaces with Microsoft stupidity wonderful intentions. One just go to the configuration of the places one wants to work as you want for better performance. It is STRONGLY recommended that in these various drives you set up folder trees that are easy to understand AND easy to use for the implementation of backup programs. The Tweaker has rather detailed suggestions tell for the settings of the cache for the Windows system files, which drive page size parameters to use. Those are the only things we change concerning the functioning of the system, and MS is only available for users to use. What readers and how much drive space you want to * system * using the cache? Your choice.

  PrPro has its own set of cache, database, project, and preview file default locations, so that the program won't work if nobody use it knows how to correctly set things upward. These default values are the folders system/users/blah/blah/blah/blah blah... not particularly easy to access for backup configurations, cleaning, that sort of thing, and not JUST because Adobe prefers you use those. In fact, they recommend that YOU set for the best working speed. The default values are all system-car and ensure the performance of the slug-bug.

  When you go to edit-> Preferences dialog box, you will find a number of these things assorted options for which you want to put them. The project settings dialog box is for each project, and it is where tell you him to put THAT prproj main project file & some other assets. It is generally recommended that you put each project in its own folder on a folder tree of files to the disc that you put your project files on.

  Note... all the different bits of the project files, database, cache and preview files have both read & write processes under constant operation. These things need quick access, usually put one shown previously one or two of them to a drive with SATAII internal best matches, or a 4/5 RAID 0/5 array disk.

  Images (media) and rendering (final exports) are mostly one-way moves. Images is primarily a read-only, and export operation is mainly a single write operation. So those who can live on slightly slower connections to the need to obtain. As to say the very fast 128 GB USB3.0 flash drive PNY I acquired in the user suggestions a couple. I tested it, and 1080 p images and exports can be handled by that without slowing down everything else... but ONLY one of these. Either images or exports, NOT both! Few people have found that say that an external SSD with images on a USB3.0 connection is usable in the things their system and speeds but spread across these disks in read/write to access tasks on several pipelines. Some have tried and found that their USB bus is also used for other internal disc or other connections, and so they had no gain speed or slow things down. Test... test.

  Neil