Problem in display

Similar Questions

• I have problems to display the Korean characters.

  My Mozilla will display the Korean characters until last week, but now it displays them in the form of the squares with a very small number. I tried all sorts of encodings, but they are not always shown. I am sure that my computers has the support of the East for languages, it properly displays files Korean but in all my browsers (Mozilla, Explorer and Chrome), suddenly, Korean characters are displayed as squares.

  I will be grateful to those who can solve my problem, ' cuz display of Korean language is really important to me.

  I have Mozilla 20 Beta.

  The sounds that you have a problem with the font that is used to display Korean characters if this is the case in all browsers.
  
  You may need to reinstall this font.

  Other East Asian as the Chinese and Japanese languages do still work?

  • http://en.Wikipedia.org/wiki/Help:Multilingual_support_ % 28East_Asian % 29
  • http://www.alanwood.NET/Unicode/unicode_samples.html
  • http://www.Typetester.org/

• my computer recently crashed and when I tried to use photoshop, then I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  Update or restore your graphics driver.

• Apple Store refuses to solve my problem of display iPhone 6s

  Hi all!

  I had a bad Apple Genius bar experience. They refused to solve my problem with my iPhone 6 s screen. There are black dots (dust, debris) on the upper left corner next to the "secret" key. I have already replace display once and twice got replacement unit. But the problem is still there. (looks like a problem of design with 6 s) This time I went to apple store and they refused to do anything by saying that we have already done what we could. Now, he must live with this problem.

  My apple care (1 year) one ends in November 2016. I'm still entitled to receive support from Apple, but they will not solve the problem (maybe there is no solution because of the poor design of 6 s).

  I don't know what to do. Could you guys suggest me a way?

  Thank you!

  Best regards

  Arslan

  You can let apple know how to use their feedback channel http://www.apple.com/feedback/iphone.html

• Problems by displaying the name of the site in the header tab.

  In the header displays the word "Connection" instead of the site, although the site is already open.

  If the extension of FoxLingo is the cause of the problems then you must disable or uninstall this extension until the developer has released an update that fixes it.

  You can also temporarily downgrade to the 2.7.3 previous version.

  • FoxLingo: https://addons.mozilla.org/firefox/addon/foxlingo-translator-dictionary/versions/2.7.3

• P10 554: problems with display power management

  It is not possible to reactivate the display (mouse movements, pressing certain keys, pressing the key) when it is turned off by the power management system. The motherboard has already been replaced by a service representative Toshiba, I even reinstalled the system, but the problem persists. The behavior is not reproducible. Sometimes it works, sometimes it doesn't.

  Anyone out there have the same problem? Is this a configuration problem or may be a hardware defect? It is already a known issue?

  Any ideas appreciated.

  Thanks in advance
  Karl Jost

  Hi Karl

  It is not easy to say, but it is possible that there is some malfunction of the equipment. In my opinion the last try to check this is to reinstall the operating system. If the problem persists there are certainly a hardware problem.

  Good bye

• Problem with display of scatterplot

  Hello

  In the joint Test TCP host read three peaks New (events) .vi I try to view a data file in a series of point clouds trace. The data is read in a global, then functional shape based on the selection of the axis and displayed.

  Each parcel allows you to choose the x and is the axis in a menu drop-down. I spent a lot of time troubleshooting the following software bug: everything I do, the program keeps displaying the old data and Econometrics again.

  The program is part of a larger application, where new data are constantly fed to the scatterplots and displayed with the old data.

  I'd appreciate your this application troubleshooting assistance. Thank you.

  Best regards

  Peter

  Oops. I think I answered before I had my coffee. You're right about the shift registers. Back to the problem at hand: the clear Plot.VI indeed work properly when used on a simplified code? For example, the VI does not erase a conspiracy when nothing else is happening in addition to tracing and then erase? Keep in mind, that we cannot really run your code, because're missing us several VI as the clear Plot.vi.

• Y560: Problem of display Windows 8 drivers

  So, recently I installed Windows 8, and apart from a few small problems, can't do the drivers for my HD5730 work! Right now, my battery drains like his on the AMD display card, but only the Intel HD Graphics. So I can not play games or change the graphics.

  Someone at - it a HD 5730 driver?

  Hi Boramk,

  Please see this thread Y560 win 8...

  http://forums.Lenovo.com/T5/Windows-8/Windows-8-on-IdeaPad-Y560/m-p/541909/highlight/true#M45

  Good luck... Zehn

• problems with display screen & icon after installing an update

  Since a update for windows install everything on the screen, icons, screen etc are extra-large and normal pages do not enter normal views for example in internet explore like on face book or any what page of the normal display mode that fits into the screen doesn't work, everything is improved, it has nothing to do with the zoom feature. And the icons on the screen are also very large, how to set this back to normal? I searched everywhere and can not find answers! Help, please!

  Hello

  Right click on desktop - customize - display settings - top left adjust font size (DPI)

  Right click on desktop - customize - display settings - Set resolution.

  Your system also has a magnifier built in which could be a problem - it can also often be programmed to work
  on mouse/keyboards.

  How to turn on the Magnifier On or Off in Vista
  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  To see if your mouse/touchpad is set to Magnify use Control Panel - mouse.

  ================================================

  You can also try restoring the system to a point before it happened or try to uninstall the update.

  Control Panel - Windows Update - lower left Installed Updates - uninstall

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problem with display properties.

  Original title: internet explorer 8, windows xp, hdmi connection works. Cannot get parameters with two screens no. 1 and 2 more.

  I sent this problem recently, I got a response that has not fixed the problem as I don't think that they read my question properly. I sent a reply thank you and said what is the current problem.

  I get the same email back me time and time again.

  PROBLEM. When I go to view/settings. I no longer get the icon with two blue screens, numbered 1 and 2. If I did, I could fix my problem.

  Instead, I get a box entitled display properties, which deals with the screen resolution and color quality.

  where is my box with two blue screens went, how do for her?

  Thank you for any input,

  Jerry.

  Hi Jerry,

  I'm sorry for the inconvenience that has happened. I will certainly help the question of fixing.

  I may need a few more details to better understand the issue.

  1. What is the number of brands and models of computer?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to update the latest display drivers on the manufacturer's Web site and check if it helps.

  Method 2:
  If the problem is not resolved, you can try to create a new user account and check if you are faced with the same question.

  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  If the problem is resolved in the new user account, you may have corrupted user profile. See link below for troubleshooting a corrupted profile.

  How to copy data from a corrupted to a new profile in Windows XP user profile: http://support.Microsoft.com/kb/811151

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problem: cannot display the ink levels

  I can't view the ink levels.  Customer support can't help.  Use the Windows 7 operating system

  Have 'obsolete' HP PSC 1410 All in One

  Always had HP Solution center which I did more.  IT seems that there was an update of software and no tab displays ink levels.  I printed sheet test that was worthless.

  Customer support says that they have no support or the pilot of this old machine.  I have my original disks, but my computer will not allow him to run because he has XP

  Please let me know if there is a way that I can see my ink levels or to get around this problem

  Thank you!!!

  If you have not already installed for this printer, and then try to download and install the latest drivers for the PSC 1410 all-in-one on the HP site.

  These can be found here. There is also a document located here, with information on how to check this model of printer ink levels.

  If you have already had a previous driver for this printer is installed, you will need to uninstall the old software and install the latest version.

  Let me know if you are able to view ink levels with software installed from this package.

• Support troubleshooting problem to display PC laptop HP G42-415DX

  Hello, I have a HP G42 - 415DX Notebook PC with Windows 7 64 bit.

  I have no display of the image on the screen and need help to understand where the problem lies.

  I updated the Bios and installed all corresponding updates.

  I reinstalled the graphics driver on the HP drivers section.

  I showed a flashlight on the screen to see if it was just the light back, but there is still no image, the scrfeen looks like it's turned off.

  I have the VGA output is plugged in and it works fine. I hit F4 and is currently on the computer only, even if the image of the screen is just all the external screen.

  Is there a troubleshooting method to see if it's something on the motherboard as the graphics card or the monitor itself without buying it? Or am I just a bit stuck guessing and hoping that it works?

  Appreciate any help

  Thank you

  M

  Welcome to the HP, MG forum.

  Our own Distinguished Professor HaggisCat addressed this type of issue and explains what could happen in the Post below.  This can help with the diagnosis on your own system.

  Display on the laptop monitor displays briefly, then disappears at startup

  Excerpt of the Post, HaggisCat comments:

  The external screen works with Windows, which means that the video card and motherboard are very good. The laptop screen has disappeared, the backlight (s), the controller or the cable is defective. A part or the combination can cause a black screen.

   

  Because you can't see anything with the light from the flash on the screen, the cable has failed or the screen itself needs to be replaced.

   

  If you put a new screen and it still does not work then replace the inverter and if you still get nothing, the cable is the last thing that this will cause.

   

  Sorry, sometimes the only way to diagnose a problem's substitution, but before you go out and buy new parts, I always suggest that you take it to a reliable repair shop to get a second opinion.

  ====================================================================================

  You've done a lot, if not everything, what can be done on the software side.

  More information about display problems:

  Common issues with the screens

  =====================================================================================

  Good luck!  I hope this helps.

• Problem Manager display Dell adding aplications

  Hello world

  First of all, please excuse my bad English.

  l have purchased a Dell U2413 monitor.

  I need to assign diferent color monitor/profiles predefined modes for diferent not color managed Applications
  because if I Don t do that, in management applications of non-(windows, autocad, 3dmax...) colors, all the colors appeared extremely saturated.

  For example: assign sRGB to 3dStudioMax and Adobe RGB to Lightroom.

  The problem is that I have installed Dell display manager and I can´t add applications to the list in automatic mode. When I drag nothing happens.

  I Don t know if I m right with that and if I have to deal with Dell Display Manager.

  My RS is windows 8.1.

  Thank you very much.

  Best regards

  Javi

  Spain

  jgilayesa,

  This could be because you are running with higher privileges than the file you are trying to "suppression" of DDM DDM. So if you start the DDM by using "Run as administrator option checked", each application that you are trying to add to the DDM must have administrator rights. Windows does not lower privileged applications send messages to those higher when UAC (User Access Control) is completely secure. Start the DDM as a normal application, without administrator privileges, and you should be ok.

• Light HP ProBook 4540 problems s display

  Product name: HP ProBook s 4540

  : Product number product number: H5J01EA #ACQ

  And I am currently using Windows 8.1 Pro 64-bit

  A few weeks, my computer was on and I left it to go do other things... when I got home, display exploded automatically as I put to do after unused 30minutes. So I moved the mouse so he can come back... However, when she came back, the contrast of the display was really very bright (to the point where I could barely see/read anything and it hurts my eyes). I ended up having to close, and then turn on the computer again to return to normal.

  At the time, I thought it was a one-time phenomenon... but now it happened more consistently and I'm not sure what to do about it. Should the screen replace? The computer is only 7 months old so I hope its nothing too serious!  Help, please!

  Hello Nineteen92,

  I understand that you view guard goes really bright and you are looking to solve. I think that an update came and he is not sitting correctly with your operating system. I will advise you a window system restore back to a point in time before when the problem happened the first time. If you look at and follow the steps in the HP Support document: use Microsoft System Restore (Windows 8) you should be able to resolve your issue with the brightness.

  I believe that the foregoing may solve your problem. Thanks for posting your question on the Forums of HP. Have a great day!

• Oracle ADF: Problem with display with component LOV selectManyChoice/CheckBox values

  Hi all

  I use Oracle JDeveloper 11.1.1.7. I want to use the selectManyChoice component in my requirement. When you use the same thing, I have observed that selectMany components as a component of selectManyChoice/selectManyCheckBox are not filling LOV VO values in drop-down list. Instead it displays the value VO destination attribute values.

  For example,.

  I have EmpVO and DeptVO. Now, I want to join LOV "DepartmentId" attribute of EmpVO using DeptVO as sourceVO. After this operation, if I drag and attribute DepartmentId of Drop EmpVO as consisting of selectOneChoice , when running, we will be able to see DepartmentName from drop down list I chose DepartmentName as attribute and departmentId as ListAttribute in LOV.

  To create the SelectManyChoice link, if I drag and drop the EmpVO instance to the page, we can find SelectManyChoice option under the "Multiple Sélection" option. As soon as the SelectManyChoice option, we will be able to see the window of EditListingBinding as shown below where we are asked to map baseAttr and displayattribute for this component. This means that he has not considered LOV which we show you. To view Department name in the drop-down list, we can select departmentVO instance 'Source database', while in the Base and display attribute we can map the DepartmentId and departmentName. By doing this, we can achieve my schenario for display in the menu dropdown. The problem is that this element of will will bind with DepartmentVOIterator and no matter what I select component selectMany, I take and wherever I need to set the value on the target attribute programmatically.

  

  Is there a declarative way to display the selectMany component that uses LOV as a source in the view of value in drop-down list? Please suggest.

  Thanks in advance.

  Praveen.

  Hi William,.

  Thank you for your response. one who shared is related to the display of values such as MultiSelect component. But my requirement is to have combination of InputText and SelectManyChoice so that the user will have two entry key in place. So whenever we enter the code value in InputText, the corresponding value in the SelectManyChoice box should be checked [some]. This combination both annd InputText SelectManyChoice I need to create a component.

  I created the component as described below.

  I created DeclarativeComponent which is having an InputText and component SelectManyChoice. Component of SelectManyChoice I'm filling ViewObject value programmatically. On the selection of any value in the drop-down list SelectManyChoice value changeListener I get selected value and conversion Stringg and affecting InputText to show the selected value. Also in reverse ie. case, whenever I enter the correct value in the InputText, valueChangeEvent, I am taking and convert these values to the list and setting the value property of SelectManyChoice in order to make the selection.

  And to make this component as a single component, I used contentStyle = ' width: 0px "to hide the box InputText of SelectManyChoice as shown below.

  

  Thank you, regards,

  Praveen.