problem in loading thumbnails Viewer

Similar Questions

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• I still need help with a thumbnail view in video files Real Player XP sp 3

  I still need help with thumbnail view in video files Real Player XP sp 3-Help! Help! Help!

  You will need to contact the support of Real Player, since the problem occurred with their program.

• How can I change the thumbnail size when you view the contents of a folder in Thumbnails view?

  None

  Rustic17,

  You can work with the unrolling of view in windows Explorer. However, if you mean specifically change the size ONLY in the thumbnail view, and then I found an article in which people have found a solution.

  Change the size of the thumbnail and quality under XP

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• AVI files created with only fraps capture movie online no thumbnail view

  have vista prem all the service packs and years until ago never had a problem same true old avi files allways showed thumbnail view but after reinstalling windows this year something strange media player 11 customer would play my videos but keep playing in the back ground even after clicking this box at top right to dismiss the media player that has not closed it was going on for a long time It was the first problem more no thumb nails now I have realplayer to play both music / divx player videos just to play the types of test files a few times Flash flash mp4 don't thumbs realplayer videos flash show the thumbnails, but not flash mp4 videos I have a flash drive, he plays as much as I want to pull up and watch isn't a problem here.  other players in support of windows vista movie maker Centre Photo Gallery of nero player photo viewer 7 do not use it a lot just love mp4 videos when fire videos on disc, I noticed last time I did a sort of what mite be wrong with my system on the nail of the thumb and videos avi file in windows Explorer with who can have an intelligence to share... will add this note a few videos due AVI see the thumb nail view... just not my those more returned to the folder as in player media of record fraps I added this file, he showed the thumbs nails it ok for the of works very well...

  have vista prem all the service packs and years until ago never had a problem even true old avi files allways showed overview thumbnail but after reinstalling windows this year something strange customer of media player 9 would play my videos but keep playing in the back ground even after clicking this box at top right to dismiss the media player that has not closed it was going on for a long time It was the first problem more no thumb nails now I have realplayer to play both music / divx player videos just to play the types of test files a few times Flash flash mp4 don't thumbs realplayer videos flash show the thumbnails, but not flash mp4 videos I have a flash drive, he plays as much as I want to pull up and watch isn't a problem here.  other players in support of windows vista movie maker Centre Photo Gallery of nero player photo viewer 7 do not use it a lot just love mp4 videos when fire videos on disc, I noticed last time I did a sort of what mite be wrong with my system on the nail of the thumb and videos avi file in windows Explorer with who can have to share intelligence...

  ==============================================================
  The following article might be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  If you want to display the content of the downloadable
  regfixes... just save to your desktop, unzip (or simply drag
  the file on the zip file and drop it on your desktop)
  and open with Notepad.

• INS-08106] unexpected error occurred loading the view 'GridPlugPlayInfoUI '.

  Hello

  I got the error message during the installation of Oracle 11 g software R2 Database Grid on Oracle Linux 6.4 OS using vnc viewer below.

  "INS-08106] unexpected error occurred loading"GridPlugPlayInfoUI"associated State"GridPlugPlayInfoUI"view."

  Please let me know how to overcome this error and continue the installation.

  Contents of the error log file:

  java.lang.NullPointerException

  at oracle.sysman.oii.oiin.OiinNetOps.addNICInfo(OiinNetOps.java:144)

  at oracle.sysman.oii.oiin.OiinNetOps.computeNICList(OiinNetOps.java:109)

  to oracle.sysman.oii.oiin.OiinNetOps. < init > (OiinNetOps.java:76)

  at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:90)

  at oracle.sysman.oii.oiix.OiixNetOps.getFullHostName(OiixNetOps.java:49)

  at oracle.install.library.util.MachineInfo.getFullHostName(MachineInfo.java:109)

  at oracle.install.library.db.RAC92Info.is92RACPresent(RAC92Info.java:115)

  at oracle.install.ivw.crs.view.InstallTypeGUI.onEvent(InstallTypeGUI.java:120)

  at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)

  to oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$ 001 (AbstractGraphicalFlowExecutor.java:39)

  to oracle.install.commons.flow.AbstractGraphicalFlowExecutor$ 1.call(AbstractGraphicalFlowExecutor.java:99)

  to oracle.install.commons.flow.AbstractGraphicalFlowExecutor$ 1.call(AbstractGraphicalFlowExecutor.java:98)

  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:269)

  at java.util.concurrent.FutureTask.run(FutureTask.java:123)

  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)

  at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

  -# Begin Stacktrace # -.

  ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:458

  oracle.install.commons.flow.FlowException: [INS-08106] unexpected error occurred loading the view 'GridPlugPlayInfoUI' associated State 'GridPlugPlayInfoUI '.

  at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:510)

  to oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$ 001 (AbstractGraphicalFlowExecutor.java:39)

  to oracle.install.commons.flow.AbstractGraphicalFlowExecutor$ 1.call(AbstractGraphicalFlowExecutor.java:99)

  to oracle.install.commons.flow.AbstractGraphicalFlowExecutor$ 1.call(AbstractGraphicalFlowExecutor.java:98)

  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:269)

  at java.util.concurrent.FutureTask.run(FutureTask.java:123)

  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)

  at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

  Caused by: java.lang.NullPointerException

  at oracle.install.library.crs.CRSInfo.getDefaultIPAddressForGNSVIP(CRSInfo.java:584)

  at oracle.install.ivw.crs.view.GridPlugPlayInfoUI.onEvent(GridPlugPlayInfoUI.java:373)

  at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)

  ... 12 more

  -# End Stacktrace # -.

  You should not use a static IP address

  Yet once you install 11.2.0.1 on Linux 6.x, who is not a certified combination - so expect problems with the installation and/or use of the software. Is there a reason that you can't use 12cR1?

  HTH
  Srini

• Cannot enlarge the thumbnail view in my analysis of file

  The thumbnail views are 10 across the page.  You will have to show all my scans of large miniature views.

  (1) download and install the free Win XP PowerToy TweakUI.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows XP downloads
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP
  (Search for TweakUI featured downloads tab)

  When the program is installed, open it and go to...
  Explorer / thumbnails... to change the quality and
  maximum size of 256 pixels.

  (2) If you download and install Windows Live Photo
  Gallery... He has a slider that allows the size of the thumb
  adjusted tbe nails.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Live Photo Gallery 2011
  http://explore.live.com/Windows-Live-Essentials-Photo-Gallery-get-started
  (There are other apps when you)
  install... uncheck those you don't want to)

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Image of the hand in the thumbnail view

  One of our files is displayed with an image of the hand in the thumbnail view, and in the details, view has a dark area at the bottom of the image in folder of files.  What does that mean?

  One of our files is displayed with an image of the hand in the thumbnail view, and in the details, view has a dark area at the bottom of the image in folder of files.  What does that mean?

  It seems that if you want something like the "Family Photos" folder in this image: http://www22.verizon.com/NROneRetail/NR/rdonlyres/E54BDDF6-5BB6-4A60-93C7-F2F0785D56BD/0/XPSharePhotoFolder.jpg

  This icon indicates that the folder has been shared (for example, it is available on your network).  The "dark area" in the Details view is the same, it is more difficult to see because the icon is so small.

  If you do not want to share the file (and thus the files in the folder), right click, select Properties, click the sharing tab and check the box "do not share this folder.

  Note: Windows XP has a "Simple file sharing" mode that is enabled by default in XP Pro and is the only mode available in XP Home.  In XP Pro, you can turn off this mode.  The 'Sharing' tab is a little different depending on whether you are in the mode.  For Simple file sharing, clear the checkbox "Share this folder on the network" instead of the above option button.

  The sharing tab, Simple file sharing enabled: http://tech.ifelix.net/images004/file018.gif
  Tab sharing, Simple file sharing NOT enabled: http://tech.ifelix.net/images004/file004.gif

• How to display a thumbnail view of pictures? My vista does not list the thumbnails in the dropdown display menu.

  How to display a thumbnail view of pictures?  When I open the folder what I see is a generic panoramic picture rather than individual images.  My vista does not list the thumbnails in the dropdown display menu.  Before updating the Windows I used to be able to see thumbnails of my photos views when I opened the files with images inside.

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

• Windows7-how can I get my photos to allow me to move the individual to the neighbourhoods, in a file, picture when they are in a thumbnail view? __

  Windows7-how can I get my photos to allow me to move the individual to the neighbourhoods, in a file, picture when they are in a thumbnail view?
  XP has allowed this and then handed over to the correct order seen again in list format

  Thank you for visiting the Microsoft answers community.

  You can organize is more manually the files in the folders - Windows 7 change is design, but if you think this is something that you want changed, please submit your suggestion on the Microsoft Connect site for your comments.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Z10 how to move music from thumbnail view to display the list

  In the application of music in the main library, how do you change the music of thumbnail view with album art and the name arranged in a grid, in a classic, if possible list view?

  NCtrans wrote:
  In the application of music in the main library, how do you change the music of thumbnail view with album art and the name arranged in a grid, in a classic, if possible list view?

  I checked every where I could think of, and I can't find any way to do this

• Problem with load LOV value reset

  12.1.3 ADF

  I am facing a problem with load LOV set to reset.

  I have a page in waterfall surrounded by af LOV: PanelFormLayout. Also do some validation on the data entered by the user when clicked on submit. If the validation fails, an alert will appear on the validation failed and user will stay on the same page.

  Values LOV child get back their null or empty when you click on the "submit" button. It works as expected when the validation failed and the user has navigated to the next page. But if validation fails, the user stays on the same page and child LOV connection reset to NULL or emptyvalue. For this reason, NPE error occurs when the user attempts submit again and have to select again the child value LOV.

  Is it possible to keep the child LOV value even after submitting a form?

  Page code:

  < af:panelBox text = "Product Details" id = "pb4" >

  < af:panelFormLayout id = labelWidth "180px" = "pfl4" >

  < af:selectOneChoice value = "#{bindings." ProdType.inputValue}.

  label = "#{bindings." Required to ProdType.label'} = 'true '.

  requiredMessageDetail = "product Type cannot be NULL. Please select a value.

  shortDesc = "Select the Type of product" id = "soc1' autoSubmit = 'true '.

  showRequired = "true" contentStyle = "width: 150.0px".

  Binding = "#{viewScope.provBean.prodType} '"

  valueChangeListener = "#{viewScope.provBean.prodTypeVCL}" >

  < f: selectItems value = "#{bindings." ProdType.items}"id ="si1"/ >

  < f: validator binding = "#{bindings." ProdType.validator} "/ >"

  "< af:target execute="@this "make ="soc2"/ >

  < / af:selectOneChoice >

  < af:selectOneChoice value = "#{bindings." ProdVer.inputValue}.

  label = "#{bindings." Required to ProdVer.label'} = 'true '.

  requiredMessageDetail = 'Product Version cannot be NULL. Please select a value.

  shortDesc = 'Select Product Version' id = 'soc2 '.

  Disabled = ' #{bindings. " ProdVer.inputValue == null} ".

  contentStyle = "width: 150.0px" showRequired = "true".

  Binding = "#{viewScope.provBean.prodVer}" >

  < f: selectItems value = "#{bindings." ProdVer.items}"id ="si2"/ >

  < f: validator binding = "#{bindings." ProdVer.validator} "/ >"

  < / af:selectOneChoice >

  < / af:panelFormLayout >

  < / af:panelBox >

  Timo thanks for your response.

  Child LOV I created is an attribute of transient and resolved the problem by setting the property of passivation to true.

• Thumbnail view

  Is Adobe Acrobat Reader for iPad support view miniature as an alternatIve to the view of the list? It is would be good if we have one.

  Thank you

  Hey kresna_s,

  We're sorry, but right now the thumbnail view is not supported in Reader for iPad.

  You may fill out the feature request for the same thing:

  Feature request/Bug Report Form

  Kind regards

  Ana Maria

• Thumbnail view of a TableView populated by an ObservableList

  Hello

  I'm inhabiting a TableView dynamically with objects in an ObservableList.  I want to score a few lines with different colors according to their content and want to display the lines marked in a thumbnail view of the TableView.  Essentially, the idea is to do something like the impressive app Beyond Compare is in the upper left window (see http://www.scootersoftware.com/images/TextCompare.png). Click on the thumbnail would be basically scroll your tableview to this location.  The square on the thumbnail represents the data that is displayed on the screen and are sized in proportion with how long the TableView is and how many lines can be displayed on the screen at this time here.

  Maybe I can bind a ListView to the same ObservableList who is populating the TableView, but just show a picture (thin colored line) for each line of the TableView which was marked.  Any ideas on how I could make something like that?

  Thank you

  Yes, so I watched it again and that doesn't even come close to answer what you were asking. I was looking at the bottom of the image (which resembles a version filtered main screen) rather than the thumbnail at the top.

  For the thumbnail, I think I'd try a VBox filled with thin horizontal rectangles. Something like:

  final VBox thumbnail = new VBox();
  thumbnail.setPrefWidth(50);
  table.getItems().addListener(new ListChangeListener() {
       public void onChanged(Change change) {
            buildThumbnail(table, thumbnail);
       }
  });
  buildThumbnail(table, thumbnail);
  // ...
  private void buildThumbnail(Table table, VBox thumbnail) {
       thumbnail.getChildren().clear();
       int index = 0 ;
       for (T item : table.getItems()) {
            Rectangle rect = new Rectangle();
            rect.setHeight(2);
            rect.widthProperty().bind(thumbnail.widthProperty().subtract(2));
            if ( itemShouldBeHighlighted()) {
                 rect.setFill(Color.RED);
            } else {
                 rect.setFill(Color.WHITE);
            }
            final int itemIndex = index ;
            rect.setOnMouseClicked(new EventHandler() {
                 @Override
                 public void handle(MouseEvent event) {
                      table.scrollTo(itemIndex);
                 }
            });
            thumbnail.getChildren().add(rect);
            index++;
       }