Problem in the data control range

Similar Questions

• Client interface methods not found in the data control

  Hello

  JDev 11.1.2.4

  I exposed some methods by including them in the client interface of my module of the application. I tested the app module and I can call methods. I refreshed the data control, but I do not see the data control methods. I have several other client application with interface module and I can see the operation. I only have the problem with this module of the application.

  Any ideas?

  Thank you

  Close jdev, delete the folder the model project of the module of the application classes and the classes folder of the project view controller where you want to use the datacontrol, start jdev, recompile the project model (and deploy the lib, if you use the library), recompile the view controller and finally see if you see the methods in the datacontrol.

  Timo

• Problem with the Data Source

  Hello
  
  JDeveloper 11.1.1.6
  
  I am facing some problems associated with data controls. Here's my number; I'm trying to pass a parameter to a taskflow appearing as a region on the my home page. Once I click on an image in my taskflow, I want to pass the id of the image to my main page using contextual events (it worth?). However, I need to create a my bean datacontrol to expose a method in the link which is triggered once I click it. But I can't create my datacontrol because I get this error:
  
  Error: Multiple versions of com/DataControls.dcx appear in your managed project classpath. Check dependencies associated with project: .../model/classes/ and .../Portal/classes/
  
  Any other approach would be nice to hear.
  
  Concerning

  Several versions of com/DataControls.dcx appear in your managed project classpath. Check dependencies associated with project: .../model/classes/ and .../Portal/classes/

  You are actually looking for the project for the DataControls.dcx in the paths specified? Ideally, there should not be a DataControls.dcx in your template project.

• problems with the date picker

  I found some problems with the date picker to make my first presentation of object BPM.
  
  I created a group with a datetimestamp it contains. When I click on it in run mode, it will bring a new tab in the browser. This behavior is different from that of a date picker outside a group where there just a small javascript popup.
  
  Anyway around this problem?
  
  Also, would be nice if could be set by default to the current date. is there a way to who?
  
  For the component "time" it seems impossible to define the default value - at least on the tab object structure.
  
  Thank you

  Try to set the property "DHTML" to control date Yes. This option is under the Properties tab-> the calendar section. This will force it to use the popup javascript on screen instead of opening a new browser window/tab.

  To set a default value for a date/time, you can simply set the value in the constructor of the BPM object in which the property is located.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• How to create the data control to a custom object of sale cloud using web service.

  Hi all

  I'm working on a requirement I need to display the common custom object data and their children object. After the display of the data user will be able to select multiple records by using the check box and then update the State to close.

  So basically, I need to create a table in which the data will fill with the checkboxs and when the user clicks on the button update then I need to update a field in the parent object.

  Any help would be appreciated.

  Thank you

  You must follow the steps below

  1. right click on the template project, select the new option

  2 Select the data control in the left hand side of the tab "All Technologies"

  4 Select "control of data from the Web Service" in the right side panel

  3. Enter the name of the data control (custom name)

  4. provide your WSDL to the URL https://crm-domain.oracleoutsourcing.com/foundationCustExtn/CrmCommonReferenceService?wsdl

  5. click Next, next if all methods to winow than wsdl, mix to the right and click Finish button

  6 refresh "data control" in your right side panel to request

  7 expand control of data and select only control data that you have already given

  8. then you can see the methods that comes from your wsdl.

  9. Select the method and expand it, you will get the return values

  10. drag and drop the return as a table value, you will get the af:table on the page

  11. don't want to operatet this table.

• Why fields view object cannot display in the data control?

  Hello
  Work in jdev 11.1.2.3.0.
  I create two objects from view of the entities under the project module.
  and see the AppModule.xml as follows:
  ..
  < ViewUsage
  Name = "TransAccountVO1".
  ViewObjectName = "Project1. TransAccountVO "/ >"
  < ViewUsage
  Name = "TransAccountBillVO1".
  ViewObjectName = "Project1. TransAccountBillVO "/ >"
  ...
  Under the control of data panel shows these two nodes:
  -TransAccountVO1
  -id
  -name
  ---..
  + Operation
  + Named criteria
  
  -TransAccountBillVO1
  + operations
  + Named criteria,
  
  THE first node is ok, but the second miss (node TransaccountBillVO1) areas.
  Why fields view object cannot display in the data control?
  
  Thanks in advance.

  delete and Add again... the value editable forever.

• Refresh of Page partial update of form before the data control returns the new value

  Hello
  
  I have a set of paintings of master detail based on a single data source (Session Bean encapsulating a web service call). The high-level table (t1) shows data of opportunity, as the low level (t2) poster contacts for a special occasion. When the opportunity is selected in t1, the contacts associated with this opportunity appear in t2. These tables of work as you wish.
  
  I have a read only form (form of the Panel layout) based on a different data control (supported by a Session Bean that calls a LinkedIn API and a table of database using EJB3 entities). LinkedIn Session Bean method takes a parameter which I get from the current row in t2. (#{bindings.relatedContact.currentRow.dataProvider.id}) I put the PartialTriggers as 't2' on the form.
  
  When the page is loaded for the first time, the first line (line A) from table t2 is selected and the display shows the data associated with this line. If I select another line (line B), the Session Bean is called with the value of the id of the newly selected row, but the display will show the associated data from line A. Thereafter, whenever I select a row in t2, bean is called with the new value, but the form displays the data from the selected line previously.
  
  I guess what happens is that the form is refreshed (using stale data in the data control), and then the call to the session bean is made. I checked using thread and print statements. Sleep() in the bean.
  
  Is this a correct behavior and how can I make sure that the call to the bean occurs before the form is updated?
  
  I use JDeveloper version 11.1.2.2.0
  
  Thank you
  Michael

  Hello

  as answered on StackOverflow, the trick is to set the refresh option on the iterator (s) to the second access WS (table 2) of PageDef on ifNeeded. The default setting is delayed, which in your case is not optimal because refresh occurs during rendering response, which is too late for the access of WS. Try "ifNeeded.

  Frank

• create the data control using ejb deployment

  Hi guys
  I am a "newbie" in Jdev 11 g and have the following question. Perhaps his simple, but I need help and someone pointing me in the right direction...
  If the session bean is created by another application, how can it be used to create the data control in another application?
  "ReferenceService"-> application of the referencesrvSessionBean
  -> Applications "forms" contains all jspx pages, etc. How to create a control of data here, to the use of the sessionBean in the other application?
  Help, please!
  :(
  
  Published by: 787883 on October 5, 2010 09:26

  It's very simple, when you are in the application that has your view layer, have to drop-> open and locate the jpr for your EJB project file.
  This will open the project and add it to your application.
  Then you can go in for your project to view preferences and under dependencies set up a relationship between the projects.

• How can I create a query with the data control to the web service?

  I need to create a query with the order of web service data, WSDL, it is query operation, there is a message of parameter with possible query criteria and a return message contains the results. I googled but can't find anything on the query with the web service. I can't find a criterion "named" to the data control of web service as normal data control. Blog of Shay, I saw the topics on the update with the data of web service command. How can I create a query with the data control to the web service? Thank you.

  Hello

  This might help

  * 054.     Search form using control data WS ADF and complex of entry types *.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

• Problem with the DATA types, in a UNION

  Hello
  I m trying to disply a custom message when no data found using the structure below. Unfortunately I ve you have a problem with the data types I im trying to union
  I tried different types of data in the 2nd SELECTION tool but the rest of the problem. Help, please.
  
  SELECT HOSP_NAME 'HOSPITAL' DOC_SUR 'NAME', 'NAME' DOC_NAME, d.DOC_ID ID, diagnosis
  H., DOCTOR d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1
  
  UNION ALL
  
  SELECT TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), 0
  OF THE DOUBLE
  If NOT EXISTS (HOSP_NAME 'HOSPITAL' 'NAME' 'NAME' DOC_NAME DOC_SUR, d.DOC_ID ID, diagnosis
  OF ΝΟΣΟΚΟΜΕΙΟ h, ΙΑΤΡΟΣ d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1);
  
  
  ORA-01790: expression must have same type of data, matching expression
  01790 00000 - "expression must have the same type of data, matching expression.

  DOC_SUR 'NAME' DOC_NAME 'NAME', ID d.DOC_ID, HOSP_NAME "HOSPITAL", diagnosis

  What is the data type for these columns

  To_char('test'), to_char ('test'), to_char ('test'), to_char ('test'), 0

  What you're doing here 'test' is already a character. Why do you use TO_CHAR?

• Cannot find the data control to the Web Service in the Menu

  Hello
  
  I try to call a web service in the ADF. To do this, I want to create a web service data command
  
  If I understand correctly, if I right click on the template project, I see the data control from the Web Service under layer Business > Web Services. (as indicated in 2.1 Sec-http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html#WsProxyPojoControl)
  
  However, I am not able to find this entry in there.
  
  I tried the following things:
  
  I tried with Jdev 10.1.3.5, 10.1.3.4 and 10.1.3.1
  I tried to select all available models of technology to create applications
  -Any model
  -Web Application [JSF, EJB, Toplink]
  -Web Application [JSF, ADF]
  -Web Application [JSF, EJB
  -Web Application [JSF, Struts, ADF]... .and everthing else...
  
  I still don't see the web service proxy.
  
  Then I opened the ADFToystore sample application, and I could see the service data Web controls here!... .that mean my jdev is not defective... something else is missing.
  
  So, I tried to see what libraries are selected... I saw that a library named 'Web Service Data Control' are there in the project, which is not there in the model applications project that I created. So I added this library to the project, but it still does not work...
  Next, I added all THE libraries I have seen in the libraries in the project properties section... still no luck
  
  I don't know I'm missing something basic. Can someone please help.
  
  Rgds,
  Amit

  Hi Amit,

  try to set the filter above in New Gallery to filter by: all Technologies

  Kind regards

  Branislav

• Problems with the date in the procedure on Oracle 11 g

  Hi gurus,
  
  I have some problems with the date under Oracle 11 g format.
  
  Let me explain the situation:
  
  When I start such a request
  Select to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'))
  of sys.dual
  
  I had as a result 2009 under the number.
  
  When I do the same thing in a procedure of a package like this
  
  my_year: = to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'));
  
  the my_year variable contains the value 9 instead of 2009.
  
  Can someone explain to me what goes wrong?
  
  I just tested with the evolution of the variable nls_date_format of environment for the session and the database is complete without success.
  
  Kind regards
  Björn

  Yes, it has everything to do with your environment settings.

  SQL> set serveroutput on;
  SQL>
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01-MAR-98
  
  PL/SQL procedure successfully completed.
  
  SQL> alter session set nls_date_format = 'dd.mm.yyyy hh24:mi:ss'
    2  /
  
  Session altered.
  
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01.03.1998 07:00:00
  
  PL/SQL procedure successfully completed.
  

• ADF 11 g: create with the data control problem: Please help

  Hello
  
  In my application, I tried to create a customized data controller.
  
  I created a Java class results and a bean ResultsBean class.
  Then I selected class results-> right click-> data controller to create.
  The Results.xml is created
  Everything is going well so far.
  
  Then I updated the details of class Bean in Results.xml and tried to re-create the data controller but did ResultsBean.xml ' t formed.
  
  
  In other words ResultsBean have not associated with outcome data controller.
  Please help on this.
  
  Version of the ADF: Studio Edition Version 11.1.1.3.0
  Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
  
  Thanks and greetings
  Maryline Roussel

  Yes you use generics to the JDeveloper type, how the JDeveloper Assistant know the ResultBean is used to return an ArrayList value?