Problem inserting a record. Help, please

Similar Questions

• After the recent Firefox updates prevent links to several websites to operate while it doesn't have this problem with other browsers - help please.

  Since a recent update of Firefox links to several Web sites is no longer working. They used to be fine and I liked Firefox. The problems do not exist with other browsers such as Internet Explorer, Google Chrome. Specifically, on talktalk.co.uk news links do not work, any more than those in 'my account '. On Barclays.co.uk the link to print my statement works no-same on MBNA.com
  There are several solutions proposed around the internet, but all are complex, so far none have worked and I don't see why I should have to make the suggested adjustments. Firefox has been great - now, it is not. The problem seems to be the update. Please help me get my Firefox where it should be.

  AFAICT then who are perfectly normal links on the news page

  The http://www.talktalk.co.uk/ opens if I click the guide Link TV/news on the https://sales.talktalk.co.uk/ page.

  If I right click on a link and use inspect element to open the Inspector then I see that there is an event onclick on the links (annex 'ev' button), so make sure that you are not blocking JavaScript.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• PROBLEM WITH NETBOOK! Help, please

  Hello guys,.

  I'm having a serious problem with my HP mini 210 netbook 1028TU.
  
  I formatted my hard drive to create two different partitions, about a month ago and installed Windows 8 Preview Release from the Microsoft Site
  After 2 weeks of use, once Windows defender detected and quarantined 4 Trojan virus. When I saw that I tried to remove them, while eliminating the netbook suddenly stopped without any BSOD or a message.
  
  I tried to restart, but now it just won't start, nothing happened since the beginning of the start screen. So I did a USB bootable windows7 to reformat the hard drive and do a clean install of windos7 Starter as it was over early. It went well and I deleted the partitions and developments and begin the installation. During Installation when it reaches 35%, he stopped and showed windows cannot be installed. I tried again, but now he hung up while he was showing "the installation program starts.
  
  Now when I start my PC it shows: -.
  
  Your PC needs to be repaired
  and an unexpected error has occurred.

  Error code: 0xc0000034

  In addition, I ran test drive by the bios and it stuck and showed "Replace hard disk 1" in RED
  
  Please guys help me I really need for my netbook

  Fix.

  Removing and reinstalling the drive is a troubleshooting step to determine if your hard disk is damaged.

  Do that first.

  If no joy, then the hard drive will be replaced by a new to make you a netbook to a usable state.

• Driver problem his (code19). Help, please!

  :/

  My problem is that after I had different virus alerts (I assume that the site has been heavily infected) of my anti-virus (avast) my sound is stopped (I treat virus alerts by sending them to the chest). Both speakers and headphones. I started watching the drives in Device Manager and for all readers under "Audio, video and game controllers" they all have a yellow exclamation point in which all have an indicator of: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).
  Have no idea what is happening! Have tried to uninstall and then search for the hardware changes... There is no return to be like it was before. Then I tried to run windows safe mode and roll back to a previous success registries config. Did not help either, so I'm a little stuck on what to do next!

  You will appreciate the advice! Thnx

  BTW: Running on an ADVENT 7084, Windows XP Media Center Edition
  Screenshot:
  I tried the 'Update Driver' option, it only gives a response that it cannot find the drivers available. T_T
  I tried to find the option 'Fix' for sound problems... but they have not
  a version of xp O - o http://support.microsoft.com/gp/no_sound ... I really didn't
  not know what else to do...
  Tried a material one, but it is not available for xp
  http://support.Microsoft.com/GP/hardware_device_problems

  PLEASE PLEASE HELP!
  N.B: I'm not an absolute computer geek! : S

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Problem installing the program. help please.

  Good day everyone,

  I try to install iTunes. Here's the mesg: there is a problem with this installation package. A program required for this install to complete could not be run. Contact your personal support provider or packaging.

  then a new massege appears saying: Installer a insuficient privileges to modify the file C:\Program Files\Quicktime\QTInfo.exe.

  I also try to install firefox, but after I restarted my computer the icon become currupt saying the program was chnge or displaced.
  even in ventrilio, he is a voice chat for online games. It will install, but after, the icon becom currupt or something

  and another problem I had is when I try to uninstall a program a message will appear saying: I have no Annie sufficient to remove or modify this option. but im in my admin account on my laptop.

  I don't know what to do, I tried almost everything I know, even make F8, I tried to use: last known good config or repair your computer.

  Please help me, I can't install anything in my laptop.

  Thanks... x)

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  Kindly forward your question in the correct Forum for Vista programs on the link above.

  See you soon. Mick Murphy - Microsoft partner

• Stops PC to bsod, do not understand the real problem... Help, please!

  If this is happening to way to since a long time already. I get a different couple of bsod while playing star wars the old Republic or the black flag AC. Yet while playing other games (simcity 5, sims 3) it works smoothly and acts like nothings wrong...

  The accidents seem to happen at random times, sometimes it runs for hours, sometimes 5 minutes...

  Sometimes he jumps just blue screens and restarts just immediately or said my monitor cannot find a signal.

  Blue screens of death, that I'm getting are:

  

  My specs:

  motherboard: Asrock Extreme3, sAM3 + ATX 970.

  CPU: AMD Athlon II X 4 640 3.00 GHz Quad-Core, 2 Mb, 95W sAM3.

  GPU: NVIDIA GeForce GTX 650 Ti.

  RAM: DDR3 1333-4 GB 1333 MHz CL9 value ICIDU 1x4Go

  2 RAM: DDR3 8 GB (no idea what brand, lost the receit..)

  Power supply: Cooler Master Elite Power 400 WATTS 70% efficiency.

  SD: SanDisk 64 GB SATA III - SATA 6 GB/s Standard.

  HARD drive: Western Digital Blue 1 TB, 3.5-inch, 7200 RPM, 64MB SATA III

  DVD player: Samsung DVR DL 23 x SATA black OEM
  Case: Cooler Master Elite 310 Midi - Tower ATX no PSU black

  running 3 screens to 4320 X 900 resolution (1440 X 900 each):

  1 PKB MAE191W

  2 acer V196 WL

  3 acer V196 WL

  Things I've tried:

  • For a long time I thought it was the game, so of course reinstalled this first.
  • reinstalled Windows.
  • removed and reinstalled the latest driver of everything in. Device Manager
  • Update JAVA.
  • tests for overheat problems CPU GPU. (Nothing found)
  • clean the inside of the pc, make sure everything is in place and reinstall RAM.
  • the purchase of a new gpu.
  • purchase new RAM (of course tested without the former).
  • games on one screen.

  None of these things helped unfortunately. I was wondering if maybe the power supply is too small, but I do not know how to test it. Cleaning and reinstallation of the RAM also seem to disappear for a few days, but it's only the first time.

  Please help me what it really bums out me and do not know how to go from here.

  OK, so I think this can be very useful in this situation: http://answers.microsoft.com/en-us/windows/forum/all/windows-7-freezes-blue-screen/6f409f24-f165-45a9-87ad-c78c7bbbe57d

  Also, it seems that your CPU has problems of operating more than 60 degrees. Are all the other time in regular operation ranges?
  You can try reapplying thermal paste or check if your CPU cooler does its job.

  Captain_WD.

• BlackBerry sudden Z10 and serious problem with Z10 NEED HELP Please

  I have a z10, one of the first who came out in Toronto (if it is one)
  (difference), a few hours ago, I fell into a serious and sudden
  problem.

  I was able to swipe left and right between the pages of apps, even fall down
  Since the Summit, but I cannot open anything, not even not making a call or settings
  Options.

  Any time I try, for a fraction of a second, it looks like its about load
  something then nothing. (image slides to the right quickly and goes back
  each attempt)

  So I first did a reset, same problem, so I did a battery pull (15 minutes) and the problem is.

  I tried via USB to do a backup on blackberry Manager and maybe do a
  Re - install everything, but when I was invited to the password
  my camera on my PC, it told me that it was (I use a wrong password
  This blackberry on my computer 4-7 days a week, twice a day sometimes for an
  year and I have never miss typed my password, nor have I changed it)

  After trying everything to make sure that the first letter was maybe upper/lower
  cases, even my other possible phone password, nothing worked...

  On the 5th unsuccessful attempt my phone prompted me to type "blackberry", which
  I did, then I typed my password on my phone that I type in about 15 times
  one day because I put my phone in a lock in 5 minutes and has always said that he was wrong... I'm no attempt of 9/10 on and lost
  for options.

  Please if anyone can give me any suggestions, or even how do I back up my phone
  and now, or I have a previous backup of whipe form 4 months ago that I
  I wouldn't come back in the worst cases.

  Thanks in advance for your help

  Well... If you are in 9 out of 10 here and you don't mind not to restore your device, then enter the password again once and then the device should enter the device wipe mode. That will reset your device to factory setting and then you can start fresh by reloading your backup made the earlier

• IPsec VPN site to site between router problem Cisco ASA. Help, please

  Hello community,

  I'm stuck in configuring VPN site to site between ASA (OS 9.1) and router Cisco IOS (IOS 15, 2 - 4.M4)

  Attachment is router configuration and ASA. I also include the router debug output.

  It seems that the two parties must isakmp missmatch configuration, but I have already disabled the KeepAlive parameters. I also turn off PFS setting on both sides. But it does not work. I have no idea on this problem.

  Please help me. Any help appreciated.

  Thank you

   
   

  I didn't look any further, but this may be a reason:

   crypto map mymap 1 ipsec-isakmp dynamic dyn1 

  The dynamic CM must always be the last sequence in a card encryption:

   no crypto map mymap 1 ipsec-isakmp dynamic dyn1 crypto map mymap 65000 ipsec-isakmp dynamic dyn1

  Try this first, then we can look further.

• Problem with export! Help, please

  Hello

  I am currently working on my new project in Redcode 4.5 k shoot and I got in big trouble export my movie.

  I tried to export the movie to the H.264 format / HDTV 1080 p 25f and there was NO noise or a sound terrible when I looked the exported movie!

  Can it be a problem that I copied a number of sequenzes varius in a sequence? I did it because I wanted to have a sequence where I can put the pieces together.

  Maybe that's the problem!

  Please help me!

  M

  Guten Tag,

  Am fantastischen an meinem neuen Projekt und beim Exportieren ist folgendes aufgetreten problem:

  ICH Versuche in first Photo aus einer zu exportieren sequence das mit dem Vorgabe Format H.264: HDTV 1080 p 25f dann erhalte ich einen Film mit entweder Bel your oder mit einem hohen Pfeiffen.

  DAS Filmmateriao das ich wurde auf einer bearbeite redone Redcode Codec quality 4.5 k.

  Kann're breast dass der nicht ist weil ich fertig einzelne possible export sequences kopiert habe und einer neuerstellten sequence zusammengefügt habe, eine quasi sequence as scenes standing habe um sie fertig sleeps aus the other scenes-sequences zusammenzustellen.

  Ware toll wenn someone could help!

  Danke

  M

  Hello! Welcome to the forums here at Adobe!

  As long as you can hear the sound when you play through your final sequence, you should have no problems to export as long as your audio options are correctly set in your export Panel. Nesting of the sequences that you have described is a very common task and will not at all affect your audio files.

  Make sure that your "Export the Audio" checkbox is checked in the window of your export. If this isn't the case, then that would explain your problems. If it is checked, then there may be something more deep as the cause, in which case it would be helpful if you could post us screenshots of your table of sound mixing and the head section of your audio tracks in the timeline panel.

  Also make sure that you're using Adobe PrPro 5.5 and that you have all the updates correct, including the RED importer, as the new RED files do not work in older versions of first. If files were shot on the RED Epic, sound doesn't work at all in native file (known bug) first and so you will have to use program Cine - X RED to export audio files to make separately and synchronize with your video. However, you would never get audio in your timeline at all, and so I think you would have noticed this problem before that you have to export, so I think that's not your problem.

  Good luck and report what you find with your export settings!

• window size problem... Help, please!

  I'm new to flex and have encountered a problem.

  I want to give a value for the coordinate x of a special group. Here's the code: -.

  resize

  sizeThermostatPanelPercentage (75, 100);

  If (! _resizeSinglePanelAlreadyOccured) {}

  singlePanel.x = (thermostatPanel.width *. 77);

  _resizeSinglePanelAlreadyOccured = true;

  }

  This code is this difficulty width on the left side panel. As if the width of the Panel is 900. The coordinate x of this Panel starts to 693. But, I want to start the coordinate x on the right side. IE, for example say: -.

  singlePanel.x = (windowSize.width *-10);

  But, of course, it does not work. Please let me know what name to declare the windowSize.

  Thank you!

  Hello

  Is that what you want?

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/MX/containers/TitleWind ow.html? filter_flex = 4.1 & filter_flashplayer = 10.1 & filter_air = 2

  Johnny

• My laptop shows that it must close due to a problem qith a GUI, help please

  What is a GUI?  Can be solved by a simple download?

  Hello Billhartland

  GUI: Grahpical User Interface!
  I don't understand, perhaps more detailed information about the error can help me get through the problem
  1A this error occurred when you were playing a video game
  2-when you watch a video?
  3. or occurs when windows xp connects?
  also, maybe it's a problem of congestion, you can clean them by using many third-party tools, CCleaner is the recommended!
  Thank you
  Ashok
  Microsoft

• AV.exe and problems that result. Help, please!

  Out of nowhere, I was struck by the av.exe virus, and he made sure I couldn't open any .exe files. I did some research and found out how to change my registry to resolve this problem, and my programs open now.

  Many of the icons on my desktop and start menu are still empty, but the .exe has been reassociated. How to bring back the icons?

  I don't know if there is anything else I should do and if the virus is still there. Norton said he got rid of av.exe, but how can I be sure?

  And also, this virus affected all files outside the .exe?

  See if this article helps you:

  How do I rebuild the icon Cache in Vista

  The virus did not affect the real. Just register, EXE files.  He probably touched nothing else, the purpose of this little piece of beef handy is to extort money on your part, not to ruin your computer.

  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com - KVOA television, Tucson, AZ.

  Live Hot Licks - www.badnewsbluesband.com

• I HAVE WIN 7 64-BIT, MOZILLA FIREFOX IS MY BROWSER HASVING PROBLEMS WITH JAVA CAN HELP PLEASE

  I HAVE WINDOWS 7 64 BIT LAP TOP, I'M WITH MOZILLA FIRE FOX AS MY BROWSER, HAVING PROBLEMS WITH JAVA... WHICH SHOULD I USE? ALSO CAN I HAVE THE WINDOWS PHOTO VIEWER TO OPEN FILES

  First; There, please do not type in uppercase.  It is considered rude and make your post less readable.

  The version of Java to use depends on the browser.  Firefox is a 32-bit browser therefore uses the 32-bit version of Java.
  Internet Explorer, for example, has a 32-bit and 64-bit version in Windows 7, the two versions of Java may apply depending on whether you are using.

  The Windows Photo Viewer can open different types of graphic files, what is the problem?

• ThinkPad x121e SD card reader problem... Help, please...

  Hello people.

  I have a problem with my thinkpad x121e. There is a SD card reader slot, but it seems that it does not work. I have a SanDisk SDHC card that I use with my digital SLR camera. When I put the card into the slot in the drive on my laptop there is no no reaction or effect that IE nothing happens. The laptop does not read. In my laptop manual it says that it can read the SD, SDHC etc. I correctly place the card into the slot in the drive...

  Anyone know what is the problem and how to solve? Who is a manufacturer fault? I bought the laptop about 2-3 months ago. The slot of the card reader, never used just tried now and found that there is a problem in it.

  Could someone help me?

  Thank you.

  Hello

  Maybe install this card reader driver will solve the problem:

  Name: card reader driver Realtek for Windows 7 (32-bit and 64-bit), Vista (32-bit and 64-bit), XP - ThinkPad

  Version: 6.1.7601.82 out the: December 27, 2011

  Link: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013697

  Kind regards

  Aryeh Goretsky

• Problem of microphone. Help, please

  Hi all

  My microphone of my X - 61 Tablet does not turn off. (Located under the screen).
  Is related to the volume control for no reason.
  The only solution I found is to mute the speakers, but this is a lame solution.
  I've updated the audio drivers and the result is that it is already up to date.
  I tried to disable the driver from the control panel but the microphone is on.

  Thank you all for your time and your help.

  Thank you!!
  I didi this way:
  Panel of-> sound-> reading-> (select your active speakers)-> properties-> tab-> mute Microphone levels levels
  I have fixed my problem of microphone by following the steps above.  My microphone works as it is supposed to.
  Control Panel-> sound: