problem install the sdk android to 99% in dreamCS5.5
I tried several times.
but it is not always with the same problem
When downloading at 99%, it alert message below
"The aandroid sdk was downloaded not because there was no internet connection please connect to the internet and try again.
[http://image.ohozaa.com/show.php?id=985690d709ef63e6149af82d25f7b283]
and I fixed aleary with NativeAppCommon.js but it helps in case of 'Android SDK couldn't install'
Thank you very much
PS. There was error of my grammar of the language I'am sorry.
You have run the 11.5.1 updater?
Tags: Dreamweaver
Similar Questions
-
Has anyone managed to install Air SDK 2.0.x on Windows 8 machine? I installed Flash Builder 4.6 very well but when I go to install the SDK in the screen where it asks that if it should integrate with Flash Builder it I cannot type any other path than in c:\users... that is when I type c:\program files (x 86) \Adobe\Flash Builder etc it says it's invalid path. I'm tunning the installer as admin and I tried both GUI and command line options.
I finally solved the problem (!) ...
Displaying the 'workaround' for all those who want to install the AIR SDK in Flash Builder 4.6 on Windows 8. Not sure if this is Windows 8 Preview Release problem and will be fixed in the last change of Windows 8 or design that is there to stay.
It seems AIR SDK installer runs as a Java application. He also appears in Windows 8, the Java runtime is now being sandboxed in C:\Users\
Directory (and below). So when the installer comes to the part where it asks which Flash Builder is installed it does not access the directory C:\Program Files (x 86) \Adobe\Adobe Flash Builder 4.6 etc.. I did the following:
1. I left the application Adobe Flash Builder
2. proposed (not copied) the Flash Builder in Windows Explorer of builder 4.6 of C:\program files (x 86) \adobe\adobe flash to c:\users\joe\adobe flash builder 4.6
3. the Installer SDK Ran. This time, I could point to the Flash Builder in c:\users and integrates very well. Gave me a warning at the end that the plugin could not be updated. Copied these directives (the updated plugin) in Notepad
4. Once completed the copied SDK installer (moved) 4.6 Builder Flash file in the folder c:\users to c:\program files (x 86) where it was originally installed.
5 Ran Flash bulder and followed the instructions copied the plugin update
Ta - da... its works very well!
BTW - I really hope RIM stops using Java for installers, because it is pain...
-
Impossible to install the SDK service experience - timeout to connect to the Package share
According to the installation guide, I tried to download and install the SDK of Services experience using the package share.
However, I always get an error page. After clicking on the Package share link, the browser hangs for a few minutes, the present the following error page:
Try to connect using the 'local' login page does not work.
In the server log, I found that kind of stack traces:
28.09.2011 18:09:02 * ERROR * PackageShareServlet: Package not available Adobe sharing server (connection refused) (PackageShareServlet.java, line 306)
java.net.ConnectException: Connection timed out: connect
at java.net.PlainSocketImpl.socketConnect (Native Method)
at java.net.PlainSocketImpl.doConnect (unknown Source)
at java.net.PlainSocketImpl.connectToAddress (unknown Source)
at java.net.PlainSocketImpl.connect (unknown Source)
at java.net.SocksSocketImpl.connect (unknown Source)
at java.net.Socket.connect (unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect (unknown Source)
at com.day.crx.packaging.impl.EasySSLProtocolSocketFactory.createSocket (EasySSLProtocolSocke tFactory.java:179)
at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
to org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$ HttpConnectionAdapter.op en(MultiThreadedHttpConnectionManager.java:1361)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry (HttpMethodDirector.java:387)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod (HttpMethodDirector.java:17 1)
at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
at com.day.crx.packaging.impl.proxy.ProxyImpl.doGet(ProxyImpl.java:552)
at com.day.crx.packaging.impl.PackageShareServlet.doLogin(PackageShareServlet.java:294)
at com.day.crx.packaging.impl.PackageShareServlet.doGet(PackageShareServlet.java:114)
at com.day.crx.j2ee.CRXHttpServlet.doGet(CRXHttpServlet.java:112)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at com.day.crx.j2ee.CRXHttpServlet.service(CRXHttpServlet.java:94)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at com.day.j2ee.servletengine.ServletRuntimeEnvironment.service (ServletRuntimeEnvironment.ja goes: 228)
at com.day.j2ee.servletengine.RequestDispatcherImpl.doFilter(RequestDispatcherImpl.java:315)
at com.day.j2ee.servletengine.RequestDispatcherImpl.service(RequestDispatcherImpl.java:334)
at com.day.j2ee.servletengine.RequestDispatcherImpl.service(RequestDispatcherImpl.java:378)
at com.day.j2ee.servletengine.ServletHandlerImpl.execute(ServletHandlerImpl.java:346)
to com.day.j2ee.servletengine.HttpListener$ Worker.run (HttpListener.java:610)
at java.lang.Thread.run (unknown Source)
Notice that I use a proxy to access the internet, and I have already configured using the experience server configuration console, in the "day Commons HTTP Client 3.1" as suggested in the literature of the day here http://dev.day.com/content/docs/en/cq/current/administering/package_manager.html#Package%2 0Share % 20Account
How can I check the Server Package share are provided by Adobe is actually alive? Are there any other requirements for the package share work? Find the SDKS required to create applications of ADEP experience in Flash Builder Services elsewhere?
Thank you
Cosma Colanicchia
Aspects, it was probably due to a temporary Package sharing unavailability, as we had some problems a few weeks ago with our server.
Access to the Package of the ADEP share, there are 2 possible login screens:
(a) login screen the package share
It comes from the Package share server and means that the server is up, running and accessible (possibly behind well-configured proxy).
(b) login screen the product
This screen will be displayed after a connection to the Server Package share has expired (not available) or denied (bad proxy server configuration).
-
So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get. Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.
Well, I found the solution, just in case anyone has the same problem. Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.
-
Install the SDK & CLI as a regular user
Hi people)
Is possible to install the SDK or CLI without root access? Of course, Linux))
Intended to investigate, preferable to install it in the chroot env or user limits. I'm scared and a lot of people can say same, install the software of the 3 - th parity on direct, work system.
Force root installation dependent license restrictions? Alternatively, I have read carefully the manual?
With best wishes - Jenifer
I don't know.
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
Laptop of HP ENVY 15 TS: problems installing the audio driver
Hi all
My product is the HP ENVY 15 TS laptop.
Product number: E7Z34UA #ABA
OS: 8.1 64-bit Windows
A few days ago, I opened my laptop to find that there is no sound coming from the speakers at all. I was completely baffled because the audio was working perfectly fine before, even after the upgrade to Windows 8.1. I tried several solutions posted on other forums, such as install other drivers and uninstall the IDT High Definition Audio Driver and then scan for hardware changes. Now, however, when you try to update the driver IDT, it says that a peripheral attatched to the system does not work. What should I do?
I've provided screenshots of things that appear when trying to solve this problem.
Hello skyeisthelimit. I understand there is no sound emitted by the mobile phone. According to the description, I think that the question is focused on software. However, I won't remove the defective hardware of my mind. You have attempted a few troubleshooting, which is excellent. I'll provide some troubleshooting facilities (some steps you already completed). Please follow troubleshooting all in order, I suggest:
First of all, there are some tutorial of Microsoft Assistant that solves the problems of sound in Windows 8.1. Please follow the wizard until it is finished. You can locate this wizard here: http://windows.microsoft.com/en-CA/windows/no-sound-help#no-sound=windows-8 & v1h = win8tab1 & v2h = win7tab1 & v3h = winvistatab1 & v4h = winxptab1
Then, follow the troubleshooting, indicate in this document from HP: http://support.hp.com/us-en/document/c03257712
Finally, you will be asked to reinstall the updated drivers. Please install it: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1 & cc = us & dlc = in & lc = on & os = 4158 & product = 5450018 & sw_lang =
Assuming that the problem is not resolved, the next step is to refresh of Windows 8. This will force the computer to return to Windows 8. It will also clean the computer, to a certain extent (it is not as powerful as a recovery). For more information about how to update Windows, please see this document from Microsoft: http://windows.microsoft.com/en-CA/windows-8/restore-refresh-reset-pc
If the operating system update does not resolve the problem, reinstall the operating system is the next step. Make sure that you back up all your data beforehand.
For more information on how to effectively back up your computer, please this document of reference: http://h10010.www1.hp.com/ewfrf/wc/document?cc=us & lc = on & dlc = in & docname = c03270359
For more information about how to perform a system restore, please reference this document: http://support.hp.com/us-en/document/c03489643
Please answer with the results of your troubleshooting. I'm only here to help!
Mario
-
Satellite A660/07U - problem install the nVidia for Win 7 64 bit driver
A660/07U Windows 7 64 bit
At first, I need to install this driver because apparently it will solve a problem with the current driver that is causing the computer freezes when booting with an external monitor as main display.
I downloaded the Setup file of driver from the Toshiba web site and it's extraction ok but when I run the program it just then immediately quits without installing drivers.
The Device Manager in windows seems not help either, because when I point to the extracted files it tells me that I already have the drivers, even if my current version of the driver is a lower number than the one downloaded.
Restart made no difference.
Any ideas/suggestions?
Thanks in advance
Hello
It is a series of laptop Toshiba to THE.
Where did you download the driver?Usually, you must choose the driver from this page:
http://www.MyToshiba.com.au/support/notebooks/satellite/A660/psaw3a-07u00r/download?OS=25I recommend you to download and try to install it once more
-
Problems installing the software and updates
I ran Microsoft Fixit as some updates and the printer software will not install. As a result, "one or more components of Windows Update are configured incorrectly". I run XP on Dell 7 years. He seems to have lost the installation files. Can anyone help please? I can re - install the original XP disc?
I ran Microsoft Fixit as some updates and the printer software will not install. As a result, "one or more components of Windows Update are configured incorrectly". I run XP on Dell 7 years. He seems to have lost the installation files. Can anyone help please? I can re - install the original XP disc?
You can do a fresh install if you feel that this is necessary.
You can try to go through this list as well...
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.htmlThose who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.Defragment
How to defragment your hard drives* will take timeCleaning the components of update on your Windows XP computer
While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update:
How to reset the Windows Update components?Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
-
Laptop of HP ENVY 15 TS: problems installing the audio driver (High Definition Audio device)
Hi all
My product is the HP ENVY 15 TS laptop.
Product number: E3B65PA #AR6
OS: 8.1 64-bit Windows
A few days ago, I upgraded my windows to windows 8 to 8.1 windows and found that no noise from HDTV when hook up my HDMI cable however video is perfectly fine. I was completely baffled because the audio was working perfectly fine before the upgrade to Windows 8.1. I tried several solutions posted on other forums, such as install other drivers and uninstall the IDT High Definition Audio Driver and then scan for hardware changes. I checked the HDMI cable and it works very well with the other laptop.
Device Manager is needle 2 device:
High definition audio device (yellow own showing)
IDT High Definition Audio CODEC
When I open the properties of the audio device high definition, that is to show:
This device cannot start (code 10)
{Operation failed}
The requested operation failed.If anyone knows how to solve the problem, please help me
Thanks in advance
Hello:
Audio driver IDT (portable speakers) seems to work very well.
The problem is probably with the Intel graphics driver that controls the HDMI audio.
My recommendation would be to install the latest Intel graphics driver from the link below and see if that fixes the problem.
-
my system is HP, 32-bit windows vista home permium
I have a problem installing service pack 2
Hello
reading this on your error code 0 x 80070490
http://support.Microsoft.com/kb/958044
also read this and you may need to repost in the sub forums
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
or repost in the Windows Update forum link below
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem
I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »
I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse
HelloThe drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.Step 1.You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
I would also recommend to check if there are Windows updates for this device.Step 2.Here is the link to download the latest drivers.
http://www.Microsoft.com/hardware/download/download.aspx?category=MK
Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.For more information see the links below.Automatically get recommended drivers and updates for your hardware
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problemsI hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Problems installing the Service pack for X 64 based system KB976932
Mr. And or assistants of Ms. Microsoft,.
I have a problem described below, maybe you have suggestions as to what I should do about this problem: whenever I try to install KB947821 fails, an error code 80080005 it fails each time, I tried all the trouble shooters, attempted a repair via Control Panel according to the instructions, downloaded a # installed Windows6. 1-KB947821-v10 - x 64, turned off the spyware, antivirus etc... They all failed again on each attempt. I have a large space and running a quad fast enough to base all in great shape, but I can't get it to install. Is this something I really need or not, it would be better to update to that right? Which could suggest that I do to solve this problem? Thanks Boyd Knight * address email is removed from the privacy *.The most reliable and fastest way to install Windows 7 SP1 is to install manually
Try downloading SP1:
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c3202ce6-4056-4059-8A1B-3a9b77cdfdda
To download Windows 7 32 bit: Windows6. 1 KB976932 - X 86 .exe 537,8 MB
To download the Windows 7 64-bit: Windows6. 1 KB976932 - X 64 903,2 MB .exe
Download, * except * and install the Service Pack with no security (antivirus/security suite) software installed, & close non-essential all the process in the Task Manager.
Steps to take before installing Windows 7 Service Pack 1
How to increase your chances to install Service Pack 1 successfully.
-
Just try installing the SDK makes me crazy
A few months ago the QNX Momentics 10.2 I downloaded was working fine until suddenly, the pacemaker stopped working. I gave up sorta trying to develop my App. recently, I decided to pick it up again, but I have so much to download files (I know that my internet is sometimes quite sloppy but...)
-Download the main installer file took me that so many times I almost gave up. Kudos to my z30 who managed to download reloading again and again when it fails.
-However, I'm trying to update the Simulator and the API levels etc. from the program itself. Somehow, files are ALWAYS corrupted and the program somehow realize that then he just keeps trying to run the corrupt ZIP, unsuccessfully of course.
-I know this because I see that the file stopped downloading at about 30-40 MB.
Sorry for the rant. So my real question is:
1. How can I download the SDK files manually to update? I tried this other method (http://supportforums.blackberry.com/t5/Native-Development/Cascades-SDK-update-fails-An-error-occurre... ), but I couldn't find the files needed to step 7.
2. How do to locate half downloaded file from my system (where is its location) and perhaps I can just try installation again? I tried just clearing my Temp files. But it still does not... don't always seem to download a fresh copy (from what I see?)
3. What can I do else?
To apologize for sounding so angsty. It's really get into me, as this seems to be a simple but intractable question. I see messages dating back to months ago and again, it seems not yet to be resolved...
Please help thanks!
BTW, this is the error message I get:
There was an error updating SDK. Press the Details button to review the error. SDK Install or Update Operation operation failed: An error occurred while installing the items An error occurred while installing the items session context was:(profile=DefaultProfile, phase=org.eclipse.equinox.internal.p2.engine.phases.Install, operand=null --> [R]bbndk.win32.simulator.10.2.0.1155 1.0.0, action=com.qnx.tools.ide.sdk.manager.core.actions.SdkManagerInstallAction). error in opening zip file error in opening zip file An error occurred while installing the items session context was:(profile=DefaultProfile, phase=org.eclipse.equinox.internal.p2.engine.phases.Install, operand=null --> [R]bbndk.win32.simulator.10.2.0.1155 1.0.0, action=com.qnx.tools.ide.sdk.manager.core.actions.SdkManagerInstallAction). error in opening zip file error in opening zip file
Update files are downloaded on
p2/org.eclipse.equinox.p2.core/cache/. Close the NDK, delete the files in this directory and try the update again If you have a different network, you can download you could install the NDK and update there and then copy this computer to your installation directory.
-
Problems installing the Java tools
I'm new to Java development, and I have a problem with the basic tools in place. I am running Windows XP, installed Java (TM) SE Development Kit 6 Update 17 and tried several versions of Eclipse. Installed Eclipse version 3.5.1 then downloaded JDE plugin for Eclipse 1.0.0.67 but when I ty to install it I get a message saying that it is not compatible with the version of Eclipse installed (it seems to Eclipse 3.4.1, which isn't available currentlly). If I simply continue with the installation of the plug-in, I seem to get some of the BlackBerry menu items in the Eclipse program but it won't let me install the d. I tried to use the option software upgrades to help Eclipse, but it will not allow a link to the BlackBerry website. It says I'm missing some elements. Any suggestions?
After doing some research I realized that the separate JDE downloads are stand-alone applications. I think that my problems have been solved. Thank you.
-
Can someone help me with this problem?
In my OS installation my screen freezes and I can't even move the cursor or the mouse pointer. I tried to install Windows XP, 7 and even 8.0 but the same problem that I have encountered. I searched the internet and I tried to install the operating system with my old HDD. Installation is complete and I think my Western Digital drive HARD Blue 500 GB, you have the problem. But I really want to use because my old HDD is only 320. How can I fix? Please help me. Thank you.Boot from your old drive hard, install the WD Diag utility and test the 500 GB drive. Another option is to use another computer to install the WD software and temporarily connect the 500 GB WD Blue to this computer.
J W Stuart: http://www.pagestart.com
Maybe you are looking for
-
How to create dynamically sorting table?
For example, I have a table with 2 columns: 'Name', 'value x; and 1 table with columns 'name' value 'y' (which is based on the value of x + a formula). What I want to achieve is to get table2 sorted whenever I change value in table1. The "Filter/Sort
-
Hello I'm learning clusters and unbundle by function name using a structure of matter. For some reason, my lead of the cluster is broken and he says the error is of the wrong data type, but I'm multiplication by a scalar, I do not understand why the
-
by filling program or show / hide control enum or ring options
Hey guys,. So my problem is that I have a list of songs I want to something like an enum or control of the ring, the user will have to click an option, and something will happen to each selection. the program will be a lot of pages where the enum/rin
-
How to remove the Bing redirect virus?
How to remove the Bing redirect virus?
-
I am going through the help pages, but do not receive a lot of help. I used the window network, set up several times and it doesn't give me a single connection and even will not create a second try. It's 1394 connection. I click Repair and he says: "