Problem installing NOR-488. 2 for windows 7
Facing some installation issues that need your support.
Tried to install NOR-488. 2 for windows 7 and there is a window
pop up. See attachment.
CAN advice there at - it a patch of window to fix this?
Thank you
Mike.T
Managed to solve the problem.
I have uninstall all programs of NOR (Please make sure that all traces of programs OR is deleted).
Website below can help guide by removing all programs of NOR.
http://digital.NI.com/public.nsf/allkb/B4BF3B96988453B98625728100009670
Then I proceed to the installation of the last worm NOR-488. 2 3.1, followed by the installation of the hardware (card GPIB).
Finally the Labview 7.1.
Now test to see if my old labview software and hardware can operate smoothly in windows 7...
Thanks for the support!
Tags: NI Hardware
Similar Questions
-
So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get. Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.
Well, I found the solution, just in case anyone has the same problem. Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.
-
After you install service pack 2 for windows vista
After installing service pack 2 for windows vista on my HP laptop, I started having a few problems. First off the computer would not go beyond the Welcome screen because he showed that an update was the installation (step 1 of 3:0 % etc.) and the computer reboots before finish. It kept the case whenever I started upward, even on safe mode. I tried to restore, but it would never be completed and nothing else would work. Now I can't go beyond the microsoft loading screen because it shows a black flat screen with no cursor. I can't enter safe mode. Help, please. Safe mode only shows the start screen but won't start so I can't access the control panel and tried to boot to the last known successful startup but it failed.
Hello
Try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
Or you can repost you this link in the Windows Update Forum.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
See you soon.
-
How to install Service Pack 1 for Windows Vista?
Please can someone help me on how to install service pack 1 for vista. I have tried almost everything, but no matter what I try it givng custody me of error codes. When I tried with automatic updates, it says download 0% done but no matter how long I leave it still says 0% done. I want it only on cos I bought the game and it does not load and when I checked for solutions it says I have to install service pack 1, which is impossible.when I won't to updates, it shows me it's there but it won't install it. I also tried tried to install with 5 independent languages, I think it was called and said, but when he got to the end I got another error code my computer came 7201 laptop computer and put aside this 1 problem everything works fine also I just bought this for £79.99 fom a 2nd hand shop have I got it for a bargain or I haven't paid on the side im guessing it is a good deal but I know very few calculates and im not big on their use
original title: VISTA SERVICE PACK 1 PROBSHello
wrong forum for your question
and when repost you it give error code when you use the stand-alone SP1 download
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
or repost in the Windows Update forum link below
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
can not install the crossword puzzle for Windows 95/98 & egames
I have an older verision of crossword egame & penis I can't install the cd on my system the tell were made for windows 95/98
Hello
Thanks for posting your question in the Microsoft Community Forum.
From the information, you can not install Crusaders games & puzzle for Windows 95/98 on the Windows 7 computer using a disk.
It would be useful that you can answer the question to help you best.
What exactly happens when you try to install these games? You receive messages or error codes?
This can happen due to compatibility problems with these games on Windows 7.
You try to install and run the game using Windows 98 or 95 compatibility modes and check if it helps.
For more information, see the articles:
Make older programs in this version of Windows
What is program compatibility?
Hope the helps of information.
Let us know if you need help with Windows related issues. We will be happy to help you.
-
I want to install service pack 3 for Windows XP home, but it is said to back up the system first. How do I do that
Hello
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717How to use the backup utility to back up files and folders in Windows XP
http://support.Microsoft.com/kb/308422Thank you -
I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490
I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.
Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1
Hello
Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:
Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates
Note: Make sure you back up your data before you perform a repair of Windows installation.
Hope this information helps. Back to us for assistance.
-
Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?
Hi, Mksethompson,
What is your model of computer?
Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."
http://support.Microsoft.com/kb/968279
Dell issue
http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx
-
WindowsUpdate_80070663
Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663 if anyone can help me I would appreciate
Hi Juan CarlosPatlan,.
Windows Vista has only two service packs. You'll find the troubleshooting steps in the links below useful.
Reset the Windows Update components
Troubleshooting of Windows Update (same steps for Vista)
If you are unable to install the updates, provide the following information:
- The full version of Windows you have installed
- KB # the update fails
- The troubleshooting steps you have tried
-
I am trying to install a program not for Windows 7 it will install on my Windows 7 computer?
I am trying to install a 2 CD disc set on my windows 7 op system, but installing im program is for windows 98, ME, 2000, XP. I'm able to put this program on my computer? Any suggestions are appreciated.
Thank you
Kirk
See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.
Windows 7 Compatibility Center
Check if your application software or hardware is on the list
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Software:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software
You can also try to run the program in compatibility mode
You can find more information on compatibility modes in the articles below:
http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:
Run in Windows XP Mode requires:
(1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).
Windows XP Mode and Windows Virtual PC
http://www.Microsoft.com/Windows/Virtual-PC/default.aspx
Windows XP Mode now accessible to more than PC
Get started with Windows Virtual PC
http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx
http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/
Windows 7 - upgrade Express features:
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade
-
Can I install CS3 design premium for windows 10?
Can I install CS3 design premium for windows 10?
Not supported, but you can try
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
I need to install the full version for windows adobe photoshop CS6. I have the CC in 2 computers. I need the CS6 for the third. I have the license. Where can I find it in the adobe download website?
Hi ilankelson,
Please see below the download link for the CS6 Applications.
Download Creative Suite 6 applications
Let us know if that helps.
Kind regards
~ Mohit
-
What is the link to install Acrobat 8 pro for Windows 7?
I downloaded and installed Acrobat 8 pro for Windows 7. But it does not accept my Acrobat 8 for Mac password.
Customer service said that it's maybe because I have a version upgrade. I was told "to activate the link."
Help, please. Thank you.
You cannot use the serial number for Acrobat 8 Mac on any Acrobat Windows product. In addition, Acrobat 8 is not compatible Windows 7.
-
She strives to update several applications and updates fail to download. My computer is connected to the internet. I realized that this design premium cs5 suite will not work with windows 8, so I installed them with compatibility for windows 7. Is this the reason why they will not be updated?
Have you tried to install the updates manually using a direct link to Adobe?
For example:
Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5: thank you
Maybe you are looking for
-
I don't know all the details except that it's an old p/c, running old software.He disobeys any time
-
How to connect Cam to video for Satellite L655D?
My daughter has a Toshiba Satellite L655D and wants to get video footage, that she turned on a Sony DCR-HC51 camcorder on his system. The camera supports the DV iLink s400 with a 4 pin firewire IEEE1394 connector. Computer laptop but does not seem to
-
How parallellize a loop with arrays?
Hello Trying to improve the performance of a program I want to parallellize a loop. This loop uses a vi that returns an array, and I guess it can be of different lengths to each iteration. The current solution is a classic CONCATENATE via shift regis
-
My apologies if this has been asked before, but I have a few questions on setup of my new switch and network. I've never worked with before switches, so it's quite a learning experience. The image above shows the current provision of my network. Here
-
MGCP FXO does not register with CUCM on VG204XM
I have a VG204XM running MGCP with CUCM 10.5. When the port is changed and reset him CUCM config push down to the VG204XM there is an error (it is identical to the Bug CSCtr78616 reported on a router 28xx in 2011) In the newspapers, I see that, once