problem installing video card

Similar Questions

• 4 GB EVGA GEFORCE GT SC 740: problems about installing video card

  Installed this today and can not get all colors other than blue and yellow. Games seems to work except the colors well. Any suggestions?

  Thank you

  No problem.

  You must run HP and Windows updates to ensure that your software and drivers are up to date.  Also, here's the latest nVidia driver for the video card.  You must download and install it.  You must click on search to display drivers.

  This is the Troubleshooting section for the monitor.  Read the guides to see if one of them is related to your problem.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion 2341sl g6: Pentecost problem drivers video card

  Good evening
  I have windows 7 ultimate, and I formatted the pc just so that I had to reinstall all drivers.
  But I have a problem: I can't find the correct driver for my graphics "AMD Radeon HD 7600 m Series. If I go into Device Manager, I see that the video card, there is a warning message that says: "the device has reported a problem and is no longer supported. (Code 43). "I have a HP Pavilion 2341sl g6.
  Thank you.

  Go to Device Manager.

  Click to expand the category graphics cards.

  If the driver is correctly installed, you will see both

  Intel HD Graphics

  AMD Radeon 7600 M or series 7670M graphics card listed there.

  If you see those, then you are right.  It is not a driver problem.

• HP 250 G3 - J4T62EA: problem with video card

  Hi, today I bought a Free back of HP 250 G3 - J4T62EA version. I installed Windows 7 64 bit and the drivers located on the HP website. I am facing a problem with my video card in the video display. In the video window, in any program, top of the video seems to move at a different speed, resulting an image of scrumbled. Is it a software or a hardware problem? The id of the map is:

  PCI\VEN_8086 & DEV_0A16 & SUBSYS_2211103C & REV_0B
  PCI\VEN_8086 & DEV_0A16 & SUBSYS_2211103C
  PCI\VEN_8086 & DEV_0A16 & CC_030000
  PCI\VEN_8086 & DEV_0A16 & CC_0300

  Fingers crossed for a solution )

  After you have installed windows 8.1 all does work smoothly, no problems at all!

• problem upgrading video cards H8-1234

  I just bought a new Radeon R9 270 for my HP H8-1234 (I also got a 600w PSU to run it).

  When I tried to install all this that I had was a screen empty. I reinstalled the original video card and it worked fine.

  I've seen a few similar posts on these cards, but not all solutions are here. What do you guys recommend? Should I just found another type of card? Is there another which offers similar performance that will work with this system?

  Hello

  I looked at some video card PowerColor HD7870 and they were ready UEFI.  Your PC is not loan UEFI.

  The UEFI Sapphire documentation clarifiies video card compatibility. Consider the following text:

  «The SAPPHIRE HD...» UEFI edition/UEFI loans products are compatible with motherboards that are consistent with the specification UEFI 2.3.1 or later. It is also compatible with motherboards that did not feature UEFI. Motherboards containing an earlier version of UEFI must be updated to the latest version or have the off option to UEFI, otherwise, the graphics card will start in legacy mode, or in some cases no start at all. Please refer to your manual for the motherboard for the BIOS update instruction".

  Looking for a ready video card no UEFI.

• HP Slimline problem with video card?

  Hello

  I got a Slimline s3020n for a few years and have never had a problem with it. A few days ago when I turned it on there is no picture on the monitor except the box that is displayed when you turn it on and it says: "no signal". I plugged into another computer to the screen to see if the monitor was the problem and it worked fine. I swapped the hard drive thinking that might work, but still had the same problem. All lights turn on and it seems that everything works (hard drive, fans) which leads me to think, maybe it's a problem with the video card. My question is if you have advice on what could be the problem and I think that the video card is integrated into the motherboard, so I have to replace the whole motherboard to fix this. Thank you.

  -Chris

  Chris,

  Your PC has built-in video on the motherboard.  If it is simply a matter of graphic, a low profile card could be added to the system.   However, you can view the following link - depending on when you purchased your product - you may qualify for an extended warranty - the problem, he describes sounds similar to what you mentioned.  I found this on the page of the product of the s3020n, btw.

  http://support.HP.com/us-en/document/c01514044

  -dm (an employee of HP, but the time and the comments here are my own, not my employer)

• REALLY weird Y570 screen problem. Video card problem?

  So I have a lenovo y570, and during random times of the day, my screen ends up looking like this.

  http://img845.imageshack.us/img845/4519/weirdscreen.PNG

  Now, once that I clic click on the screen, scroll upwards or downwards or refresh the page, the image disappears, so this isn't a serious problem, its all just annoying. I have already updated the video card driver and uninstalled mcafee (who got rid of other problems that I had), but this problem still remains. Any suggestions?

  Hi Thaibo,

  weird display can be caused by a bug in the browser Google Chrome .

  Please try a different browser e.g. Firefox or IE.

  Zehn

• computer does not start after installing video card

  I, m new here so please bear with me.  I have a PC HP Pavilion Media Center TV (m7434n) I'm trying to replace the video card (Nvidia GeForce 6200SE with Turbo Cache) in. I am trying to replace it with a Nvidia EVGA 8400GS. I delete all the nvidia drivers, make sure that the pci-e card is used in the implementation. I have then to remove the old card and install a new one. When I try to start the computer, fans turn on but that's all.  There is nothing on the monitor.  The computer does not start. I replaced the power supply bestec 300 watts with a new antec brand 430 watt power supply.  When I reinstalled the old video card, the computer starts ok. I tried to replace the video card with an ATI Radeon HD5550 too and it's the same thing (the computer would not start), reinstall the old card and it starts up fine. Any help would be greatly appreciated.

  Gary,

  You may have a compatibility issue with the ATI HD 5550 and 2006 PC model.  I've seen other posts where ATI 5xxx video card did not work in older HP PCs.

  When you are referring to the installation of the older video card do you mean going back to the integrated video card?  Moving the video cable to the card installed?

  Install the NVIDIA 8400GS and connect the video cable. Now follow the instructions for clear the CMOS.

• find Mo for the installed video card

  I followed the instructions given when I searched on the net. Go to the control panel and find an icon that has "customization" that there is zero with this specific formulation?... I know how to find the 'specifications' of what has been installed for the MS and windows, I'm running. But obviously do not understand what "video card" is slot, do not know how the terminology of "message window"... It is currently:

  MS Win XP

  Home

  Version 2002

  SVC Pak 3

  Intel (R)

  Celeron (R) CPU 2 .80GHz

  2.80Ghx, 992 MB of Ram

  Physical address extension

  MSWindows + P home Ed

  Version 5.1 Copyright 2007 MS

  (build 2600xpsp_sp3_9fe.101209 - pak 1646:serve 3)

  Intel

  Chip type: SiS661

  DAC: internal

  MEM: 32 MB

  Adapter String Miraee

  BIOS: 2.02.00

  Now that's what I found... not quite in 'the lay terms' for me to well understand where is the MB video card? I missed something? Y at - it 128 MB?... or...?

  Thanks for your time on this

  I followed the instructions given when I searched on the net. Go to the control panel and find an icon that has "customization" that there is zero with this specific formulation?... I know how to find the 'specifications' of what has been installed for the MS and windows, I'm running. But obviously do not understand what "video card" is slot, do not know how the terminology of "message window"... It is currently:

  MS Win XP

  Home

  Version 2002

  SVC Pak 3

  Intel (R)

  Celeron (R) CPU 2 .80GHz

  2.80Ghx, 992 MB of Ram

  Physical address extension

  MSWindows + P home Ed

  Version 5.1 Copyright 2007 MS

  (build 2600xpsp_sp3_9fe.101209 - pak 1646:serve 3)

  Intel

  Chip type: SiS661

  DAC: internal

  MEM: 32 MB

  Adapter String Miraee

  BIOS: 2.02.00

  Now that's what I found... not quite in 'the lay terms' for me to well understand where is the MB video card? I missed something? Y at - it 128 MB?... or...?

  Thanks for your time on this

  Download and run install Belarc Advisor and look under the device device/display of the video section. What is the video card listed as (maybe not the memory here.)

  Seems that it is probably an integrated video card and probably share memory with the system - which means that is likely to be located in the BIOS. If you go into THE system BIOS (before any operating system is loaded) you may be able to see and control this part.

  Just look up, the best hypothesis, you set side 32 MB (megabytes) for video memory 1024 MB (megabytes) or 1 GB (gigabyte) memory system.  Two things lead me to this...

  MEM: 32 MB and the total number of 992MB RAM.  If you add 32 MB to 992 MB, you get the 1024Mo - or 1 GB or total system RAM.

  In any case - this is not a game machine.

• Windows 7 hangs with the hardware problem, possibly video card

  We currently live hourly breaks down our Windows 7 ultimate (64 bit) desktop system.  Whenever Windows 7 restarts, it informs us that Windows 7 crashed because of a "hardware problem/question.
  We spent the last week using Memtest to test each individual memory stick (8 GB total RAM, 4 individual memory 2 GB sticks), as well as each of the individual memory on the motherboard slots.  Tests total were about 24-36 hours (not all at once, of course.)  Memtest found no errors.
  We are therefore now move to the video card.  Anyway is the same way and diagnostic test the video card (something similar to the test of memory)...?
  Sense, is there any software diagnostic tool that can be downloaded — like Memtest - to test its video card...?
  Thanks in advance for answers!
  * original title - card video problem *.

  Hello

  Utilities usually just video card testing their performance and General compatibility with Windows
  and the programs they are running. For the test that deals specifically with crash, BSOD and other
  questions, it would be best to contact the video card manufacturer support and check with their forums.

  Motherboard (and system manufacturers) also have troubleshooting utilities, if they will help you
  to access it.

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  ------------------------------------------------

  Check this thread for J Stuart W response which has some utilities that might help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/random-black-screen-on-Windows-startup/ac0e0e3d-C6A2-4c35-9a69-81cfc446831f

  ------------------------------------------------

  This, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  These utilities can read the Minidump and another error collection files if you need to see what
  in them there. If this BSOD report see the below troubleshooting tool and report those or other issues
  here for further troubleshooting assistance.

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ============================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 answers.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can help with other errors you might find.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problems installing video controller on M40X-233

  I have a Toshiba Satellite M40X-233 and have the following problem: after purchase, I went on this site to get the latest drivers for my laptop. Installed everything ok except the video controller. After installation of this one (Intel controller), he asked I want to reboot the machine and then could not connect, there wasn't enough resources to load the connection profile. I could only fix the problem by loading mode without failure and unistalling the #$% & pilot. After that, I tried to install the old drivers that came with the laptop, but the behavior is the same... So now I uninstalled and that you don't have any video controller, which is really bad, but well, at least I can work... everyone has the same problem? How to correct?

  Kind regards

  Carlos

  Hello

  First of all what I want to know, is why you updated your drivers after buying a new laptop? In my opinion the new book must work properly and it is not necessary to update anything.
  Second, the graphics card, you can check in the Device Manager.
  What you should know. But I also checked this information on this device one that laptop has a Mobile Intel 915GM Express Chipset AlvisoGM graphics card. In this case, you need a graphic driver Intel.

  On this site you will find a driver needed.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Problem with video card satellite A500-1GH (I think...)

  Hello

  I'm having a problem with my A500-1GH. Randomly the screen goes black and then recovers by showing a message "display driver stopped responding and was retrieved successfully." My graphics card is Nvidia GeForce 330. I read many things, but all reviews were old - since the beginning of the year and nobody has solved this problem then. Do you know if there is now a solution for this?

  The laptop is brand new (respectively the windows is brand new) and the drivers and bios are up-to-date.

  Thanks in advance :)

  Hello

  Yes, it is a known problem with the vga driver in this forum. Already, you said it yourself, nobody has solved this problem :( I can just recommend you try to install a vga from nvidia.com driver. In my case, I have NVIDIA Gt 230 M, driver update has solved.

• There was a problem installing this card material Ralink Turbo wireless LAN, that an error occurred during the installation of the device. The system cannot find the specified file.

  Opus system Windows XP Edition SP3 eddition family

  I tried to install two NICs - Netgear RangeMax Wireless - N USB 2.0 adapt WN111v2 and PCI Ralink Startech 555WG 801,11 g Wireless PCI Adapter Card. In both applications on the end of the installation I received the message that installation failed.

  I downloaded all the latest drivers, disabled antiwirus program and firewall, I called the software factory. Nothink helped. Everything is pointing to problem windows install the drivers.

  For installation of Netgear USB wireless adapter WN111v2 - after installing software you plug wirelles adapter to the USB port and start the final driver configuration. After that I get message "installation of the client software has failed. Restart your computer and run Setup again.

  Can you help me?

  Hello
  
  Step 1: Adding to the suggestion of A70M1C, you can also check if the problem persists in the clean boot state.
  Reference: http://support.microsoft.com/kb/310353
  
  

  Step 2: Also check if you can find any error message in the event viewer and send back the same.

  Reference:
  http://support.Microsoft.com/kb/308427
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Problem with video card only detect audio TV (no passthrough) via EDID

  See this old marked question 'Answered' when it was clearly not: http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/problem-outputting-51-surround-sound-via-tv-to-a/2edeb051-46d8-4428-81d9-23782ad12543

  Here are once again this issue: http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/unable-to-configure-hdmi-multi-channel-audio-only/dad9204b-0855-4cda-95c7-c586ac6a2503

  This question has been around for three years without any company, address. In a common home theater setup, I have my geforce 650 connected to my TV via HDMI, and my TV is used as a relay to my receiver via an optical connection 5.1.

  Now, if I use my Xbox 360 in exactly the same setup, I can simply force the 360 to output 5.1 despite being inherently stereo TV sound. However, Windows (with the geForce card) only detects the audio setup of your TV EDID and allow only native stereo output.

  The fix to play media using a third-party player (think VLC) to manually select audio output; However, this does not have any other way to get audio, such as games or internet streaming.

  A simple option to choose out of I want advanced would be greatly useful in sound options instead of force to choose only a possibly erroneous detection.

  Thank you.

  Hello Zach,

  I suggest you to report your application in the Windows's community of Experts for assistance on this issue.

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/87.aspx

  It will be useful.

• Problem upgrading the h8-1409 HP Envy video card problem

  Hello.

  I just bought this machine and it has a good processor and ram good, but it comes with a card missing video (HD7570).  I want to upgrade the video card at one of the best maps I have of my old machines (Gigabyte GTX 660 ti and an Evga GTS 250).  When I install one of these cards but, I get no video output.  I can hear the initialization of the system and the hard drive works, so everything seems fine here.

  This machine comes with a 460W power supply, which should be enough to run one of these cards, but no go.  In order to exclude food, I tried on a secondary market, OCZ 600W PSU, but got the same result.  Two cards work in my old machine, so I know that the cards are good.

  The specifications of the main Board are here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03132942

  As far as I know, it should work.  Is there something I'm missing?

  Thank you very much.

  Hello

  Only use one video card in your PC and make sure that it is installed in the PCI-E x 16 slot.

  Boot in the bios (ESC and F10) and go to security topics. Try each of the topics and search a secure Boot Configuration.  If it exists, then see if Secure Boot is disabled.  A poster said that secure boot disabling enabled the installed video card. I have not tried this on a HP active UEFI motherboard but I know that it isn't a problem with another mother UEFI card that I use.  Your mileage may vary.