Problem loading of Image of CSS by dynamically loading the fxml file?

Similar Questions

• Satellite A200 and Win7 - problem loading the graphics driver

  Hi guys I have a problem with my Satellite A200 (PSAF6A).
  I installed windows 7 just now, now half the time when I start the computer it displays a message on windows encounters a problem loading the graphics drivers and the resolution is terrible. When I restart immediately, most of the time, it loads fine - no message and a good resolution. I tried many driver reinstall but it is always the case.
  Someone knows what's the problem? Is this with windows 7, or do you think the graphics card can be on the road to extinction?

  Thanks for your help, a lot.
  -Chris

  Hello

  It was ok before installing windows 7? I don't think it's a hardware problem. Have you installed the driver for the Toshiba driver page?

• Problem loading an xml file if not placed locally.

  Hey!

  I started a discussion on my capture setting problem and I now reduced it now. It turns out it wasn't settings do not have caught. The swf file takes the fine settings, so this apparently isn't the issue. My problem is that it seems that the file won't loaded .xml. When I have my .xml and .swf file locally on my computer and it works, it works very well. When I place it on my web server the same way, it works fine. However, when someone puts my .swf in embedded on their Web site that the XML will not be loaded by the SWF for a reason any. Here's the AS3 code, load the xml file. He was works well all the way until I started playing with the call of the swf from different sources (web server of my friend in the integrating etc.).

  -loading of the external xml file.

  var urlRequest:URLRequest = new URLRequest ("http://www.website.com/folder/myfile.xml");

  var urlLoader:URLLoader = new URLLoader();

  var myXML:XML = new XML();

  var xmlList:XMLList;

  myXML.ignoreWhitespace = true;

  urlLoader.addEventListener (Event.COMPLETE, fileLoaded);

  urlLoader.load (urlRequest);

  function fileLoaded(event:Event):void {}

  the code to play with the xml file once loaded

  }

  It seems that fileLoaded() is never executed unless the swf runs locally or on my computer or my server or called directly in the browser (like by typing in the web address field). I really can't understand what is wrong. Any suggestion is appreciated!

  try to create a file crossdomain.xml with this information:

  http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">     
  

• C0000218 {registry file failure} the regestry cannot load the hive (file)

  I have XP pro. on a Dell computer. Think that children may have picked up a few difficulties. When trying to boot into safe mode, I get "Stop: c0000218 {Registry file honor} the regestry cannot load the hive (file): \SystemRoot\System32\Config\Software or its log or replacing." It is damaged, missing, or not accessible in writing. »

  There is no disk that came with it, but I have anouther computer with the same windows. I tried to find a way to make a BOOT disk but cannot find a way. Is there a way to solve this problem with the windows disc?

  It's a pretty popular mistake these days and sometimes easy to get running, but you also want to figure out how it happened.  I always suspect Symantec/Norton products with this error, but we'll see.

  If you currently or have already had a whole isntalled Symantec/Norton products, what are the names and versions (if you know).

  Other variants are:

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SECURITY or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing. It is damaged, missing, or not accessible in writing.

  STOP: c0000218 {Registry file failure}
  The registry cannot load the hive (file): \SystemRoot\System32\Config\SYSTEM or its log or replacing. It is damaged, missing, or not accessible in writing.

  I would start with a chkdsk/r since the recovery CD of Console you make (see below) and please answer a few questions...

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system was working fine until this happened: _.

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• blue screen after Ko 2840149, error - "STOP: c0000218 {Registry hive failure} the registry cannot load the hive (file): \systemroot\system32\config\SOFTWARE.

  After I installed security KB2840149 on a 2008 VM w/exchange server that is running on the machine of Hyper-v server 2008 I'm dead in the water w / E-mail down hard.  The virtual computer is in a reboot cycle bluescreening before I can get anywhere.  Tried the last well known - no effect.  Safe mode - so bluescreens.

  BlueScreen info:
  STOP: c0000218 {Registry hive failure}
  The registry cannot load the hive (file):
  \systemroot\system32\config\SOFTWARE
  or its log or alternation.
  It is damaged, missing, or not accessible in writing
  I saw that it was a patch of replacement for a patch that crashed a lot of PCs.  Since there is no history on this patch, I wanted to check in a see what is the best way to fix this on a virtual machine?

  Being not so deep on VM, I wasn't sure if there was a better way. But I just put the virtual machine to load 2008 iso and then made the standard repair for registry problems off the coast of the article below.

  Of http:

  If the Windows registry is slightly or moderately damaged, you may be able to restart the computer in safe mode and use system restore to restore the registry from the computer to the last known good configuration. However, if the Windows registry is seriously damaged, all types of logon will be prevented. Trying to connect to Windows causes the system fails, then restart. In this case, you will need to boot the system into the recovery instead of Windows Console. Once in the Recovery Console, you can use the Startup Repair tool. Startup Repair tool automates common diagnostic and repair of the installations of Windows tasks starts longer.

  (a) start your Windows Vista or Windows Server 2008 DVD
  (b) on the first Setup screen click Next
  (c) in the lower left corner of the screen, choose "repair your computer".
  (d) on the System Recovery Options screen, select your Windows installation and then click Next
  (e) click on "Command prompt".
  (f) go to X:\sources\recovery > startrep.exe
  (g) this will take some time but will look at any registry related issues.

• The registry cannot load the hive (file): \systemroot\system32\conig\software or its log or replacing. It is damaged, missing, or not accessible in writing.

  My laptop does not start all of a sudden upward - it crosses the safe mode screen, acts as if it is loading windows (display the windows screen) then becomes to empty, followed by a very quick flash of the message on a blue screen: "the registry cannot load the hive (file): \systemroot\system32\config\software or its log or replacing."  It is damaged, missing, or not accessible in writing. "Then, he repeats the cycle.

  I looked towards the top of the error on the Microsoft Knowledge base, and the hotfix request using the recovery disk, I.  I wonder how I can get the interactive help on laptop computer file so that I can run so that it fixes the problem... (http://support.microsoft.com/kb/307545).

  Advice, that someone could give me so that I can at least get started again windows go down all the important data before reinstalling Windows would be much appreciated.

  Thank you

  Chris

  Hey Chris,

  Thank you for visiting the Windows Xp forum

  I was wondering if you run a retail or OEM of Windows version. If you are using an OEM version of windows, you will need to use the recovery options you have from the manufacturer of your computer. If you run a commercial version, feel free to follow the article in the knowledge base you have found.

  http://support.Microsoft.com/kb/307545 how to recover a corrupted registry

  I was also wondering if you have another computer to work? If so and you feel comfortable or know someone who can remove the hard drive from the computer and connect it to another computer. You can view the disk hard kit to join. Once the hard drive is connected, you can go in my computer and copy all the files to another hard disk.

  Georgio
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Stop: 0xc0000218 {registry file failure} the registry cannot load the hive (file): \SystemRoot\System32\Config\Software is damaged, missing, or not accessible in writing.

  Original title: blue screen.

  My computer won't start even in safe mode... c000218 (failure of a registry file)

  Cannot load the hive (file): \systemroot\system32\config\SOFTWARE is damaged, missing, or not accessible in writing

  Hi rookiegeek,

  You did it of any material changes or software on the machine prior to this problem?

  The three possible causes of the problem are:

  (a) failure.

  corruption of file b) & defective hardware.

  (c) the problem can occur on shutdown.

  You can follow this link & check if the problem persists.

  Registry troubleshooting steps for advanced users

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When upgrading to Windows XP SP3, Windows 7, it loads the temporary files, and then I got an error message saying "the install.wim file does not exist.

  When the upgrade of xpsp3 for win 7 it loads the temporary files and 1 min in step 2? "" departure ": an error message appears that says install.wim file does not exist?

  original title: problem installing win 7

  Hello

  You can't upgrade Windows XP to Windows 7.

  Windows 7 upgrade paths

  This document describes the upgrade paths that are supported and not supported for editions of the Windows® operating system 7.

  Unsupported upgrade scenarios

  • Upgrade to Windows 7 from the following operating systems is not supported:
  • RTM of Windows 95, Windows 98, Windows Me, Windows XP, Windows Vista®, Windows Vista Starter, Windows 7 M3, Windows 7 beta, RC of Windows 7 or Windows 7 IDS
  • Windows NT® Server 4.0, Windows 2000 Server, Windows Server® 2003, Windows Server 2008 or Windows Server 2008 R2
  • Upgrades on place of several architectures (for example, x 86 to x 64) are not supported.
  • Place of cross-language upgrades (for example, en - us en - us) are not supported.
  • Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.
  • Upgrades from Windows Vista to Windows N, Windows K, Windows KN or Windows E are not supported.
  • Upgrades on place of type Cross-compiling (for example, the fre to chk) are not supported.
  • Pre-release in place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.

  Supported upgrade scenarios

  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  Enterprise	Enterprise
  Home Basic	Home Basic
  Home Premium	Home Premium
  Professional	Professional
  Starter (x 86 only)	Starter (x 86)
  Ultimate	Ultimate

  Home Basic	Home Premium, professional, ultimate edition
  Home Premium	Professional, ultimate edition
  Professional	Ultimate
  Starter	Home Premium, professional, ultimate edition

• SE error message: "the registry cannot load the hive (file) \systemroot\system32\config\software"when try to start on the original copy of Windows XP. "

  Original title: you're smarter then me. Help, please

  My windows xP home edition has crashed on my HP Pavilion a620n. Initially, I was able to get by using the original cd of the publishing house. Then it crashed again. Rebooted and pressed F8 and typed in my administrator id. This time, a cam of the screen saying that it was an ID of invaled. Re-checkeded my Id and it was OK. Put in my cd original and installed on a different partition. Problem is that I forgot to do a dual boot. Now I have two sessions of windows xp on the same partition. Am able to switch between them, but really need the original. When I click on the origianl happens with the registry cannot load the hive (file) \systemroot\system32\config\software.

  Is it possible to fix this?

  Thanks, it was a great help

• Windows.Old - Can I load the entire file at once my computer is restored with it's info earlier?

  original title: Windows to restore the old windows.old file

  Hi all. I recently had to reinstall my os after that sp1 problems (thanks a lot to Microsoft) I now have a windows.old folder with all of my old saved stuff. Question is, can I load the entire file at once my computer is restored with it's info earlier? Pls let me know. Thanks in advance

  Hello

  None

  You can not load the whole file

  Windows.Old is not to restore your computer

  You can only recover data from the windows.old folder

  programs need to be reinstalled from the original media

  Read about the windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

• Customer HFM 11.1.2.2 error - "cannot continue - unable to load the resource file.

  Version: 11.1.2.2.306

  Desktop Client (11.1.2.2) installed and when I try to open the client I get an error message saying

  "Cannot continue - unable to load the resource file.

  Note: I have uninstall and installed once more, still the same error and I tried to install 11.2.2.000, 11.1.2.2.306 customers HFM, still useless

  Please suggest

  He worked installing Client HFM 11.1.2.2.306 64bits, previous, we tried 32 bit that, reason why the origin of this problem. Now resolved.

• I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  Photoshop CS5 is only compatible with Camera Raw to version 6.7. Photoshop CS5 is is no longer updated by Adobe. The best way to have the latest version of Photoshop is to his scribe for the package of creative photography of cloud. This would have the latest version of Photoshop and Lightroom. You will receive updates of these two programs through the creative cloud.

  If you don't want to upgrade your Photoshop you can download and use the DNG Converter last to create digital copies of (DNG) negatives of your raw images. You would be able to use these files with the software you already have. But you won't receive updates for the software you are currently using. Your new device photo, the 70 d, requires camera Raw 8.2 which is only compatible with Photoshop CS6. Camera Raw 9.2 is only compatible with Photoshop CC 2015, which is only available through the creative cloud. You might want to consider the purchase of 14 Photoshop elements as a complementary program to what you use.

• I have Canon Powershot G3X and cannot load the raw files in PSE13. Is a patch available?

  I have a Canon PowerShot G3X and cannot load the raw files in PSE13. A fix is available for this unit yet?

  Hi William,.

  Canon Powershot G3X supported by Camera raw version 9.1.1 and the latest camera 9.1 available with PSE 13.

  Devices supported by Camera Raw

  In the meantime, you can use the 9.1.1 DNG Converter to convert your raw images to DNG and then use it with PES 13.

  Windows

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.1.1

  Mac

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.1.1

  Let us know if it helps.

  ~ Mohit

• Could not load the .zip file in the media internal binary

  Hi all

  We are facing a problem in the application migrated to atg10.2 where Bcc we are not able to download the .zip in media-internal-binary file extensions.

  I went through the documentation that says it can be used for the .gif, .jpeg extensions, but we were able to use this feature in 9.2.

  So is it possible to customize it and allow zip files in the media internal binary?

  Thank you

  OK so got the mapping for this view and now able to load the zip file.

  The mapping of the view is AmPValImageExtensions. You must add the extension .zip inside with .gif, .jpeg.

• load the xml file into a database to help table of travel point

  Hello

  Someone help me please with a possible approach. I have an interface for APEX users where users can download a file xml in apex table wwv_flow_files using the element to browse with a button "submit". Now, after loading the xml file in the wwv_flow_files table. I need to read and load the xml data into a table sample_tbl. I'm using the version of Oracle APEX 4.0 and Oracle 10 g R2 database. Here is an example of XML file to load. Please help me possible suggestions.

  <? XML version = "1.0" encoding = "UTF-8"? >

  < dataroot generated =... >

  < MySample >

  < KeyId > 1234 < / KeyId >

  eddskc < KeyName > < / KeyName >

  < scheduleDate > 2013-06-16T 00: 00:00 < / ScheduleDate >

  < StartTime > 2013-06-16T 08: 00:00 < / StartTime >

  < EndTime > 2013-06-16T 08:30:00 < / EndTime >

  < / MySample >

  < MySample >

  < KeyId > 5678 < / KeyId >

  jppdf < KeyName > < / KeyName >

  < scheduleDate > 2013-05-19T 00: 00:00 < / ScheduleDate >

  < StartTime > 2013-05-19T 08: 00:00 < / StartTime >

  < EndTime > 2013-05-19T 08:30:00 < / EndTime >

  < / MySample >

  < / dataroot >

  Thanks in advance.

  Thank you

  Orton

  orton607 wrote:

  My sample_tbl has a start_time field and its data type DATE.

  Good.  Be sure to always store dates as the DATE.

  The application (in this case, APEX) needs to format the date date type in the appropriate human-readable format.

  The problem with the incoming data is the 't'.  You will need to convert a space using REPLACE() in the framework so that your SELECT statement

  From there on, conversion to the DATE data type is simply

  to_date( replace( start_time_str, 'T', ' '), 'YYYY-MM-DD HH24:MI:SS') as start_time
  

  And, just in case where, the conversion of DATE for the desired format:

  to_char( start_time, 'MM/DD/YYYY HH12:MI:SS AM')
  

  Although, I'm 'hours' as being left-padded with zeros... Am I looking for how / if you can get rid of the zero prefix (0).