Problem of access to the first database created on Vista computer

Similar Questions

• With problems of backup of the files on my Windows Vista computer

  original title: backup of files

  Should I back up my files because my laptop needs to be repaired and my manufacturer says they will delete all my files when they fix it. Can I do it myself with a plug-in or should I have a professional to do? I don't know I can even do that because even if the power led lights up the screen remains white and it beeps constantly.

  Hello

  If the screen remains blank and you have the error beep codes that normally indicate a hardware problem, I suggest you take it to a professional to get your data before handing over to manufacturers of laptop for repair.

  There is information below in this answer as to how you can recover your data if you are comfortable with the process of making

  but it involves opening the laptop

  For your information:

  to ensure that the beep codes mean you need to know what is the bios of your laptop and then read it as the links below average error codes

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.computerhope.com/beep.htm

  Read this on the record of your data:

  as you can not start your machine due to a suspected hardware problem you can use a linux-based cd to recover data when there is a problem with your hardware that a linux cd must still use to operate because it uses your laptop hardware to operate: card mother etc.

  To save the data:

  1 remove the hard drive from the laptop and it slave in another computer

  2 buy or borrow a USB disk drive hard case laptop insert in it, then connect the speaker to another computer

  Use anyway to try to read the data on this portable hard drive from another computer

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• How can I disable the first elements adobe from my computer crashed

  How can I disable the first elements adobe from my computer crashed

  Hi Franks,

  This probably should have been posted in the Premiere Elements forum, as this forum is a place of social discussion.

  However, you can simply install Premiere Elements of the new computer and activate it. If not, then you will need to contact Adobe customer service and use the 'chat' option - they will help reset your activation:

  Contact the customer service

  I hope this helps!

  Mike

• problem with access to the records of oracle on windows 7?

  I use windows 7 and after that I installed oracle 11g in my PC, I created a database (DBCA). After that I tried to open my file (SPFILE) server named SPFILEORCL settings. ORA
  located in oracle\product\11.1.0\db_1\database... But when I try to open the file it gives me a prompt window ("access denied"), and the only way I could open it is thanks to my administrator account.
  
  My question: it means that it is better to do my job and coding on oracle through the administrator account? or it's always better to use my limited user account, although it does not access to all records of oracle? What is the Advisor for a better future use of the product?
  
  Note: I use 64-bit oracle 11g release 1 on Windows 7 ultimate 64 bit
  
  
  Published by: user12238193 on December 6, 2009 01:39

  user12238193,

  The spfile is a binary file - edit the file with Notepad/Wordpad or another text editor will corrupt the file. Use the ALTER SYSTEM command to change the values in the spfile. If you want to use a text editor, create a the spfile init.ora, open the file init.ora (in the database folder), change the file init.ora with a text editor, close the database, rename the spfile, the startup of the database. You can then create a new spfile from pfile (init.ora).

  The following command will create a the current spfile init.ora:
  CREATE PFILE FROM SPFILE;

  Once Oracle is installed, you should be able to use your limited account. The instance of database (Windows service) must default to run with permissions of the SYSTEM account, so you will always be able to modify the spfile with ALTER SYSTEM command when logged in with your limited account.

  UAC (User Access Control) in Windows 7 seems to work a little better than the same functionality in Windows Vista, and if this feature is enabled, even an account to the local administrator group does not work with permissions of administrator permanently. This means that you will not use the limited account to prevent the unexpected drive - by spyware infections.

  Charles Hooper
  Co-author of "Expert Oracle practices: Oracle Database Administration of the Oak Table.
  http://hoopercharles.WordPress.com/
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

• Problem: Only tracks from the first album of my first artist will play

  OK, I just got the Sport Clip MP3 player this Christmas... a 'red'... holds 4 GB.
  (1000 songs). I am trying to charge about 25% as many files as one.

  This post is about my SECOND problem with this device:

  So I have a group of music CD that I recently ripped

  pieces chosen and I am now trying to load and listen to them
  on this new MP3 player.

  I ripped the tracks about 3 to 6 months, using Win - 7 and the
  Microsoft "Windows Media Player".

  [I copied MP3 files of your sample provided by the player on my laptop
  (for analysis and guard) and then delete those files from the
  drive... they resided in the "Music" folder it. ]

  Then, as I did with SUCCESS for my old small MP3 player
  (called an 'Eclipse'), I just did a GUI-copy (by press Ctrl-A)
  series of directories and then "glued" (with Ctrl-V key) those in
  now empty the folder of music on the MP3 player. It took everything a
  While (he said 287 files have been copied) and they pass got there very well.

  OK, but now only the files of the alphabettically artist-FIRST,.
  that is to say Bob Dylan tunes, seem to play! However, I checked all the others
  files of 8 or 10 artists are also residents.

  Photo of Bob Dylan from the (first) album cover look fine (this magic
  worked)... to see the photo album and titles appear very well in the
  small graphics window.

  But I can't navigate to a subfolder of the records of any other artist so everything that
  I listen to are the tracks from the first album of Bob Dylan (for example 5 songs)!

  [These exact steps works very well on my plu 'Eclipse' $20 $ MP3 player.]

  So, any ideas on what could be "broken"? This product is ready for
  Prime time? (I think I saw an ad for it on your site, dated from)
  11 months ago... February, 2014). I just bought this thing
  before beginning last December, 2014 at BestBuy.

  All ideas welcome. Help, please!

  TIA...

  OK, what I said in the previous answer, while true, is NOT what the problem was.

  The problem was that the unit do NOT have the latest firmware in there!

  We have that probably all assume that a device purchased just before Christmas (approximately one month)

  would have the latest firmware in it.  But who are not necessarily the case.

  The last/most recent firmware RIGHT NOW (in January 2015) is version 1.22.

  So I would advise anyone who purchases the Sport Clip to CHECK and see what it

  review is currently in the unit, and if it's less than that, your FIRST step

  is to update!

  To check this, simply navigate to 'Settings' > 'System Settings' > 'Info' and examine

  the number of 'Version '.  (Think I have this right.!)

  Once updated, now when you load your music files, you have the best chance all

  will work as it is supposed to.  [I said 'best chance' because there may be still other bugs.]

  ===========

  My proof of this:

  (1) Firstly, I attached the MP3 player to my computer and DELETED all the

  songs that I had loaded into his 'Music' folder

  (2) then, I followed the procedure to update the firmware, as shown on this Web site.

  (3) Finally, I topped up my MP3 files, still in their 'sub-repertoire-tree' format, in

  the 'Music' of the device file, exactly as I had done earlier.

  Yes, everything works NOW as expected... I can now listen to every album of

  all the artists.

  Hope this helps someone else who has had problems!

• WVC210 DYDNS AND PROBLEMS WITH ACCESS TO THE WEB

  I have 2 Configuration for WVC210 cameras on dydns of deleted I can't see them on the web. I can access via the local network using the ip address and port or the dyndns name and port. The router has listed as a virtual server and I even put one of them is like DNZ (outside the firewall of the router), the port check tools show a port opened from a remote location. And I can ping. But I can't connect to the camera. Also, I was able to view a WVC54GCA camera with the same configuration. Any ideas?

  I can get both of these cameras no problem... just not able to connect but the login box comes right to the top as soon as I hit him enter after you put the URL...

• Problems of access to the files of user account after the change of password

  I forgot the password of a user rarely used account, so I changed the password as an administrator.

  I can now get access to the account, but the only problem is that all files seem to be empty.

  Is it possible that I can get access to the original files?

  Hi Carol and John Winter,

  1. What are the files you are trying to access?
  2. how exactly you are trying to access these files?
  3 is confined to a specific folder?
   
  Check what is the file size by following the steps mentioned below:
  1. right click on the folder and click Properties.
  2. check if the file size is 0, if it is 0, this means that the folder is empty.
   
  It can also be a problem with permissions.
   
  Check out the following link and check.
  What are the permissions?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions
   
  Hope this information helps.

• Secure access to the local database of HTML5

  Hello

  I have a client who is the main concern is safety. I look at using local databases webworks and html5 to store sensitive data. I would like to know if the local databases are encrypted with the key signature application? If I were to write a native java application so I know that I can directly access the SQLite api and specify encryption. However with the html5 databases it seems not be the option.

  I if I understand correctly, the local databases are implemented with Google Gears on OS 5 and SQLite for OS 6 and more. I need a solution that works for both. I prefer not to use custom js extensions, but if it's my only option.

  Does anyone have information about this?

  Encryption must be done through the extension. The implementation of SQLite on the smartphone supports encryption, but does not include the HTML5 specification for the database.

• I have a problem with access to the C drive.

  Original title: lost access to the C: drive...

  When I was a noob after installing a new HARD drive, I have written an autorun.inf file to my C: drive to make it look cool (you know, give it a cool name, and change the icon). I was not allowed to save .inf in the root files, so I decided to open the properties and tinkering with security... when I turned on my computer later, I now do not have access to the c drive, and cannot do anything administrative (including rear safety switching)

  Please, please help!

  Hello

  Method 1:

  You can enable integrated admin and restore the system.

  Step 1:

  To activate the built-in Administrator account, follow these steps:

  a.Click theStart button, then type cmd in the Search box.
  In the list of research results, right click on cmdand then click run as administrator.

  b.At the command prompt, typenet user administrator / Active: Yesand then press ENTER.

  net user administrator , c.Type and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.

  Type exitand press ENTER. Disconnect from the current user account.

  Step 2:

  System restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Method 2:

  If the problem persists, perform a repair installation (upgrade on the spot).

  Check out the following link to do the same thing:
  http://support.Microsoft.com/kb/2255099

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  Reference:

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  It will be useful.

• problem to connect to the VM database

  Hello
  
  I have a host of windows 7 with vmware 8 and a comment running oracle linux version 6 Update 2 for system
  x86_64 (64-bit). I installed 11 GR 2 database on this subject. The installation went even though it is OK and the database is in place and
  connect very well within the system of comments. The problem is that it does not connect to any part of the outside
  the comments system. An attempt to connect results in TNS-12535: TNS:operation has expired. Even the results of tnsping
  in the same error.
  
  It's results of tnsping from a customer who is not the host or guest. This client can ping the ip
  192.168.1.62.
  
  C:\ > tnsping test
  
  AMT Ping Utility for 32-bit Windows: Release 8.1.7.0.0 - Production on 20 June 20
  12 19:03:45
  
  (c) Copyright 1997 Oracle Corporation. All rights reserved.
  
  Try to contact (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.62) (PORT = 1521))
  TNS-12535: TNS:operation expired
  
  
  The guest system can ping the computers inside the network, and other systems can ping the guest and the host
  systems without any problem. The listener and the database are all the comments system.
  
  The entire communication is inside the firewall, the local network, so the firewall isn't a problem here.
  The only solution I've seen on the internet is to remove the /etc/resolv.conf file (does not work) or use
  NAT networking for the virtual machine. We use networks bridged with static IP for machinery of the host and the guest
  and it seems that others have used the bridged network also.
  
  Is there an obligation to use NAT to make this work? Is there a setting that makes the connection to the guest
  database system possible?
  
  Thank you to everyone who is trying to solve this problem.

  Take a look at EdStevens and other answers on this similar topic
  >
  You probably did not open port 1521 of the firewall (iptables) of linux comments box.
  >
  Re: Connectivity between Local OS(windows 7) and Vm OS(Enterprise Linux)

  Or this link
  http://AWADs.NET/WP/2012/02/21/how-to-connect-to-Oracle-database-on-a-guest-VM-from-the-host/

  If you are looking for 'oracle 11g vm tnsping', you will find a lot of visits.

• Unexplained problem with PF_TRANSFER_RECT in the first

  It is transferred from after effects SDK forum, since I couldn't help there:

  http://forums.Adobe.com/message/4456832

  I am trying to perform a simple operation using AE SDK for effect in first:

  Create a new world (mask) and fill it with the color and alpha, then mix it with a composite mode selected images.

  I did works in After Effects. It uses WorldTransformSuite1 transfer_rect, which is not supported by first. However, his counterpart, PF_TRANSFER_RECT is supposed to be supported.

  The first results, be it to YUV or RGB, are really almost at random according to the color that I select. Sometimes I get a blue cast throughout the image regardless of alpha channel, sometimes, I get the mutated alpha channel, even though I have the rgb_only flag set to true, sometimes just apparently nothing happens at all.

  The mask is drawn correctly. If I simply copy output worldwide, all right. Clearly, this is the PF_TRANSFER_RECT who is to blame for inappropriate transfer.

  Can someone help me? I tried to debug this thing, but I can't seem to find a meaning in the behavior.

  The legend of PF_TRANSFER_RECT is pretty generic:

       ERR(PF_TRANSFER_RECT(                          in_data->quality,
                           PF_MF_Alpha_STRAIGHT,
                            in_data->field,
                            &output->extent_hint,          // rectangle
                            &mask,                    // source world
                            &composite_mode,          // comp mode
                            &mask_world,               // mask world
                            0,                         // dest_x
                            0,                         // dest_y
                            &temp) );                    //dst world
  

  Temp is already filled with & params [PLUGIN_LAYER]--> u.ld

  mask_world is defined as the world of mask for mask and PF_MaskFlag_NONE flag.

  I struggle with it for a week, and I'm totally frustrated.

  Hi walczakb,

  I went ahead and posted a reply in your AE SDK original forum thread.

  Zac

• problem with access on the main stage

  Hi, how guys I hope you fine

  Here is my problem

  I have the fla called "game.fla" file and there are a lot of images in the main stage, I want to spend

  class called "admin" in the library but how?

  I tried to this

  parent.gotoAndStop (39);

  but it doesn.t work I do not know why

  and this is the error message

  C:\Users\win7\Desktop\game1\admin1. As line 902 1061: call to a Stop method maybe not defined through a reference with static type flash.display:DisplayObjectContainer.

  right ok, I remember now

  one solution is to replace

  parent.gotoAndPlay)

  with

  MovieClip (parent) .gotoAndPlay (39)

• Windows 7 connection error "the security on the server database has not a computer account for this workstation trust relationship"

  Could someone help me by giving the solution on this error message:
  "THE SECURITY ON THE SERVER DATABASE DOESN'T HAVE A COMPUTER ACCOUNT FOR THIS WORKSTATION TRUST RELATIONSHIP"

  http://TechNet.Microsoft.com/en-us/library/ee849847 (WS.10) .aspx