problem of analog with PCI-6115 and BNC-2110

Hi, I have an acquisition of data PCI-6115 and BCN-2110 connector card I want to measure continuous analog voltage. Now I can permanently measure the intensity of light laser of photodiodes through channel 1 and get the reference through the 0. Then I can get the harmonic signals by the multichannel lock - DAQmx.vi. However, I also want to simultaneously detect another analog signal in channel of gold voltage 2. The problem is: Channel 2 voltage range is approximately 0.3 mV to 6 mV which is significantly lower than the other channel 2 (0 - 10V), how could put different prescription by channel continuously and simultaneously acquire all data?

I found that Dennis Knutson has provided the solution a year ago, which is listed below:

In the solution, it should be arrays of strings, lines, patterns, but I do not know how to apply it to my case. Is there a suggestion or another solution?

Thank you very much!

You have the autoindexed exit task and is not correct. Try the code below.

Tags: NI Hardware

Similar Questions

Strange problem with analog output PCI 6251 and BNC-2110

I'm controlling current source of third parties using the connectors of analog output on my card PCI 6251 and BNC-2110.

The current source needs an input signal of 0.1V. I tested it using a battery, the potentiometer and the voltmeter, and by manually adjusting the voltage of power current works - current output with control voltage scales according to the specifications and is relatively stable.

The data acquisition card works too - when I connect a voltmeter to the AO0 AO1, the measured voltage corresponds to the target with great precision value.

But when I connect the current source of third AO0 AO1 data acquisition card, the measured output voltage drops and fluctuates. This applies to both channels of the AO.

I wonder what is the problem here. I suspect it could be a matter of the grounding - the current analog control of the source is an entry with two floating terminals differential. I tried to return the switches FS/GS on the BNC-2110, but that makes no difference.

Anyone knows similar behavior? Does anyone have any suggestions?

Why Lightroom CC will not download Nikon D610 photos, the same problem, I got with lightroom 3 and told me that I had to upgrade.

Why Lightroom CC will not download Nikon D610 photos, the same problem, I got with lightroom 3 and said to upgrade?

Make sure you sort the display you are looking at instead of file name recording time. It is in the context menu with a small sign of a to z just below images. Make sure also that you have no active filters.

problems syncing multifunction with PCI-6229

Hi, I use PCI-6229 and LabVIEW 8.0 for synchronized of the thermocouples and voltage measurements. The diagram is attached here. Here are my questions:

(1) with the analog inputs of TC is ranked very first and followed with inputs analog voltage, as shown in the diagram, it works fine. But once the tension AIs are placed first and followed with AIs for thermocouples, thermocouple reading makes no sense, for example telling 25 deg C, the program shows strong fluctuating temperature 10-80 deg C.

(2) the delay time using DAQmx Trigger, here I put the Start.Delay = 2, Start.DelayUnits = ticks. And sampling rate = 1000 Hz for sample clock VI. Then, is equal to 2 X (1/1000 second) delay time = 2ms? If no deadline is set, which is the time between the trigger signal and actural reading? Will it be the time device resolution 50 ns?

All entries would be very appreciated.

Hi Matt11,

(1) the order that you specify strings in your task will affect the order of scanning. In other words, when you add the channels voltage before channels of temperature, the material can enjoy the tension or s channels followed by the string (s) temperature. Since the 6229 is multiplexed, it comes to each channel sequentially switching in a single ADC. In your case, it seems that the tension on the ADC to measure voltage not had time to resolve completely prior to taking the measure of temperature. We refer to this sometimes as ghosts in extreme cases where the value measured on channel b mimics the tension on the channel.

I think that you have found that you can get this by adding the TC task first. You could probably also get the same result by allowing more break-in between channels on your scan list. You can set the time between the channels with a Timing DAQmx property node (you can set the property is the clock frequency convert, which is the opposite of a waiting time). For slow sampling rates, sets DAQmx convert a default clock rate up to a minimum of 1/14 US (on the x 622). If your overall sample rate is less than 1/14 us (about 71 kHz) then you should have room to lower the clock rate to convert more of this if you wish to allow more time to settle between the channels.

I'm a little surprised that you see errors because of it (generally, the problem comes from a signal source of high imepdance measure or when sampling at higher rates), but then again, the temperature measurement would be very sensitive to small voltage fluctuations since you deal with thermocouple voltages at room temperature. Given the order of scanning affects your measure the problem is almost certainly introduced leaving not enough time for the ADC to settle after reading your string tension.

(2) ticks means actually timebase tick rather than the graduations to sample. The minimum is always 2, but this match 2 graduations of 20 MHz (100 ns) time base from which the sample clock (unless you choose otherwise or specify a sampling rate less than 20 MHz / 2 ^ 32), instead of 2 graduations of the 1 kHz sample clock (2 ms). In fact the trigger is probably performed asynchronously at the base of your time, if you are anywhere between the graduations of 1-2 the basis of delay time (50-100 ns) according to the relative phase of the trigger to the time base. If no time limit is set, the default value according to me is still 2 ticks which is the minimum that allows hardware (you can check on your own by reading the property node if you wish).

These points should be compatible between different driver versions, with the exception that DAQmx chose by default convert rate differently in earlier versions of 7.4. Select the conversion rate is a compromise between the settling of deadlines and the channels are sampled how "simultaneously" on the MULTIPLEXED Board. The final result in point 7.4 of DAQmx was a compromise apparently arbitrary add 10 US for the minimum conversion period and use this as the maximum by default between the channels. The user can of course always set the clock to convert to all what best fits their application (in your case, you might want to allow a settlement more between each channel).

Best regards

Cable RTSI with PCI 6034 and 6602. Test validation of LabVIEW code.

Hi all

Please could someone take a look at my code (LabVIEW 8.5) and tell me if it does what I hope it is? (!)

My goal:

To connect to analog to a PCI-6034 and data of angular encoder to a PCI-6602 tensions. I want my tension and angle data to synchronize.

My approach:

Both cards are connected with a RTSI cable and configured in MAX. One of the counters on the 6602 is set up like a clock. I think I use this clock to make sure that my angles and tensions are synchronized. I want to read in a load of data from two sources, treat it, and repeat.

The synchronization set is a little new to me - the code execution, but right now, I'm not sure if I get the sychronisation I need. Please what could someone comment if this sounds right or give me any advice for the improvement?

Thank you!

Ian

Sorry Ian,

This code was a bit thrown together then you might need to forget it. The table of construction was incorrect, and I don't quite know how it got there.

The output of the counter in the middle of your task is not doing anything. You can remove this, and as long as you had a single start task depends on the other that you already do and share all the same settings of the clock, which should start the task at the same time and keep it synchronized to readings.

On top of that my tip for better start synchronization would be to use a hardware trigger to start tasks. the start is so dependent on a hardware clock and not software.

Kind regards

asynchronous IO with PCIe-6535e and DAQ - mx

Hi people:

I am trying to explicitly define and use either async or sync I/O using a PCIe-6535e DIO with DAQ - mx card. Nowhere in the acquisition of data-mx vi can I find the adjustment means either async or sync I/O. Does anyone know of an explicit vi reference say examples that I missed when this is discussed and or fix.

Also, assuming that I learn how to set the ack/write to the map mode, which defines the functionality and the strobe effect of the PFI pin which act as out of my data / data in banner? I can see that things like width pulse, delay etc. can be defined, but how to define? Or do I have to declare another channel with DAQ - mx and these control me manually. I tried, without real success.

For example, it would be really useful to do.

PFx pin _________-----------___________

xxxxxxxxxxxx XXXXXX (0xe7) line0:7

For the data from the card.

and

xxxxxxxxxxxxx xxxxxxxxxxxx (0xCA) line0:7

PFx pin ___________-----_______________

For the data of the car. In this case I'd be strobe the PFx in my FPGA.

I'm a bit confused as DAQ - mx does not seem to give me the command that I need to set the e/s mode, and I can't find any explicit

mention as to who, or how to properly synchronize the features of the PFI pin with my data from my vi.

Thank you.

Andrew

Hi Josh:

After discussions with our technical help academic rep, he suggested I oversample data and incorporate the pulse in the data. I did a little twist on the idea and I have attached a vi test I did. This creates just what I need. It'll work. I got def like other options, but it's good enough for now. If I had a devil FPGA I could move the world, and I can't do the code kludgy as that I joined. I would be interested in def in what other solutions that you or someone else could lead to the hearing.

Thank you.

Andrew

PXI-6250 and BNC-2110 to 5V relay?

I try to use the PXI-6250 by BNC-2110 relay 5V. Please advise if this is possible and how.

Thank you

Liming

Hello liming,

It is certainly possible, but there are some limitations. Are there current requirements for the 5V relay. If it is low current, you should have no problem controlling the relay with one of your PFI lines (they are located in the Terminal screw of the BNC-2110).

Question related to the entrance with pci 6221 and SCC 68 analog

I use 6221 PCI and SCC 68 analog read of voltage between the terminals of the drain and the source of a transistor. The drain is at 0 Volt and source is connected to 5 volts via a 100 k resistor. The transistor is used as a follower of the source, and therefore the output is measured at the source of the Terminal. When I measure the voltage by using oscilloscope, I see clearly the change of output as a result of change of voltage of the door. But, when I try to acquire the same by using labview, I see nothing. I tried to change the signal to the CSR, NRSE, but nothing works. Seems to be that something related to differences in impedance. Can you please advice me on this issue? Thanks in advance

Hi rsd111,

I understand that you measure a circuit similar to this ( http://en.wikipedia.org/wiki/Common_drain)

I also get that you use an external power supply with GND connected to the Drain and - 5V connected to the Source with a 100 k resistor.

You should be able to measure the tension between D and S setup a differential measurement and connection Ai0 + D and Ai0 - s, in fact you can youse Ain you prefer.

You should be able to do the same measure also at configuration NRSE linking Ai0 AiSense at the Source and drain.

The Board's input impedance is greater than 10GOhm, it must behave as the oscilloscope in pairing mode high-impedance DC.

6221 specifications: http://digital.ni.com/manuals.nsf/websearch/8117DF4C5A29C95C862573020061023B

Nice day.

Problem with PCI device and network controller

Hi, I have problems with drivers, I tried several but does not work. I have a laptop HP 2000 with windows 7 Ultimate 64-bit. These are the properties of hardware retail:

Network controller

PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
PCI\VEN_10EC & DEV_8176 & CC_028000
PCI\VEN_10EC & DEV_8176 & CC_0280

PCI device

PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC & REV_01
PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC
PCI\VEN_10EC & DEV_5209 & CC_FF0000
PCI\VEN_10EC & DEV_5209 & CC_FF00

Help, please

Thank you

Hello:

You need these drivers:

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102008-1&cc=us&DLC=en&LC=en&OS=4063&product=5093394&sw_lang=

are there problems of compatibility with the V6 and Norton 360 as there were in the past?

When I tried upgrading to a newer version, a number of my functions of Norton 360 would not work and I got a pop-up message indicating that there is some sort of compatibility issue. I got eventually back to V4.

No there aren't any 'problems' with Norton. Norton has released a fix for compatibility for Firefox 6 last Tuesday, a few hours after Firefox 6 is out.

http://community.Norton.com/T5/Norton-360/update-available-Firefox-6-0-compatibility-patch/TD-p/512484

Satellite P300D - 12L - problem of microphone with Yahoo messenger and Skype

Hi again!

I use Windows Vista 64 SP2 and I have a problem with the microphone, if I use Yahoo messenger, Skype.
If I want someone to talk to, no one can hear me, or I don't hear from him. There is no difference whether I use Internet or wireless cable. I get the message "wifi weak signal" or something.
I have to mention the fact that, among all attempts made so far once worked, but just once. Im going to crazy. Can someone help me please?

Thanks in advance

Microphone internal generally on Toshiba laptops work correctly with different messengers, especially with Skype.
I checked on several laptops and did not notice a single problem.

So I guess there must be a problem with the audio settings.
Did you install own OS or the Toshiba Recovery for 64-bit image?
Audio driver is installed correctly?
Have you tested with headphones?

Compaq Presario desktop XP-problems connecting / came with the settings and files of the previous owner

My Director ex-chorale of the Church and his wife (was his computer) moved to Minnesota and gave me this Compaq Tower and the monitor speakers. She cleaned me all of hers off the coast. Well, she didn't. She switched to the network connection and modem. I'm low on memory. Help support & the beginning, Compaq support and connections says "unable to connect to the server." I have fast Internet with Comcast cable. His modem is Gegere or something and the network connection is RealTek 97 Fast family and mine is Arris (modem). Specifications of the computer:

XP Edition family c. 2002 SP3

Compaq Presario Intel inside Celeron (R)

CPU 2.53 GHz

248 MB of RAM

CD player works but the DVD player does not open. Connection is so slow that it takes 5-10 minutes to open anything. IE8 gets constantly "stops responding." Just like Firefox. When you try to close a window or stop start, end the program box comes back and comes back again and again.

Went to start-help & support-Compaq help and did some tests. For Audio, etc. get: "Exception in DisplayRunMap.runmap.

Only had this computer for 2 weeks and did nothing to save. Can reinstall Norton Security Suite for Comcast and my Microsoft Professional 2007 from a cd. Thought to do the system recovery. This OS came with Compaq and recovery CD system recovery option and there is F - 10 System Recovery on initialize toward the top. Are they the same? I first have to install Windows XP on a bunch of CD? Can't make a DVD if the drive does not open. The button is loose and nothing happens.

I am 63 and security social disability so can not afford a new computer, or to hire a technician. Help, please!

When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number.

The 'F10' and Compaq system recovery of Windows XP system recovery are the same thing. You don't need to create "HP recovery discs" before making a recovery, but you may need these disks at a later date. If a set of disks has already been created, you will not be able to create a second series and you may need to buy a game from a third-party vendor. With the complete model number name and/or product will allow us to direct you to a place to buy these records, if necessary.

Please click the White Star of KUDOS to show your appreciation

Problem dark videoconference with WinLive Messenger and LifeCam VX-3000

My LifeCam VX-3000 webcam cannot support a video call in Windows Live Messenger. I can text back OK, and sound and motion video work very well when I check the audio/video settings. When I try a video connection, the system hangs on my end... the other party may accept the call but my end still ringing and the video image is frozen... There is no sound during this video call attempt. The system is XP Home SP3... all security is up to date. I use a 6 Mbit internet service. I did a complete uninstall of Windows Live Essentials, re-installed components and get the same result. This Setup worked fine until a week ago. This problem would have started at the time, I installed and started using MagicJack, but I tried to uninstall Magic Jack and the result is the same. Maybe another change is that Windows Live Messenger has offered an upgrade to a newer version that was made. I'm looking for some ideas on any peripheral or software conflicts and methods to isolate or resolve them.

Hello

Method 1.
First of all I ask you to re - install the Microsoft Life Cam software and drivers from the link below and then check out.
http://www.Microsoft.com/hardware/download/download.aspx?category=ice

Method 2.
If the problem persists, perform a clean boot to find any conflicting with the Windows Live Messenger application.
For more inoformation on boot, refer to the article below.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: Don't forget to set the computer to start normal, as mentioned in the above article.

Also update the chipset drivers and check. You may need to contact the manufacturer of the computer for that.

I hope this helps.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Hi I have a problem of xml with xsd validation and insert into the table...

I use this function to validate the XML with xsd, but it gives-31000 error related to xdb
and I also try to recover data from the xml file, but it is fetching nullability of him.
while I was trying to recover data after removing the tablenamespace, url and other additional field or can tell
from a simple xml file than it is to get him.
Please help me with this!
FUNCTION to CREATE or REPLACE ALI$ XML_VALID (P_xml IN xmltype
P_xsd IN xmltype)
RETURN NUMBER
is

l_status NUMBER;
l_xml xmltype.
l_xsd XMLTYPE.
l_v_schemaURL VARCHAR2 (256): = "NewBusinessApplication.xsd";
schema_doesnt_exist exception;
pragma exception_init (schema_doesnt_exist,-31000);
BEGIN
l_xsd: = p_xsd;
Start
DBMS_XMLSCHEMA.deleteSchema (l_v_schemaURL, dbms_xmlSchema.DELETE_CASCADE_FORCE);
exception
When schema_doesnt_exist then
null;
end;
DBMS_XMLSCHEMA. REGISTERSCHEMA)
schemaurl = > l_v_schemaURL
, schemadoc = > l_xsd
local = > TRUE
, genTypes = > FALSE
, genbean = > FALSE
, genTables = > FALSE
);
l_xml: = p_xml;
If l_xml.isSchemaValid () = 1 then
dbms_output.put_line ("' scheme is valid");
l_status: = 1;
RETURN l_status;
on the other
l_xml.schemaValidate ();
l_status: = 0;
RETURN l_status;
end if;
END;
-call to above function
DECLARE
l_xml xmltype: = xmltype (' <? xml version = "1.0" encoding = "UTF - 8"? >)
"" < NewBusinessApplication xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance"
"" xsi: schemaLocation = "http://www.example.org NewBusinessApplication.xsd.
xmlns ="http://www.example.org" > ".
< TransactionHeader >
< TR_REF_NO > 000009812681 < / TR_REF_NO >
< EFF_DT > 20140703094140.572 [-4:US / Eastern] < / EFF_DT >
< SRC_SYS_CD dmnSRC_SYSTEM = "TSS" > Support of TV system < / SRC_SYS_CD >
< / TransactionHeader >
< ApplicationRq >
< ApplInfo >
< APPLNO > A00018L < / APPLNO >
< MED_NONMED dmnMED_NONMED = "M" > medical < / MED_NONMED >
< APPL_DT > 20140714 < / APPL_DT >
< EFF_DT > 20140714 < / EFF_DT >
< APPL_RECV_DT > 20140714 < / APPL_RECV_DT >
< / ApplInfo >
< AgentInfo >
<! – repeat the nodes below for more than one agent - >
<>Agent
< AGT_CD > AGN0000001 < / AGT_CD >
James < FIRSTNAME > < / NAME >
< NAME > Whorphin < / LASTNAME >
BKK1010090009 < AGT-LICNO > < / AGT-LICNO >
the Warriors < TEAM > < / TEAM >
Suriya Thapa < TEAMLEADER > < / TEAMLEADER >
BKK909988999 < TEAMLEADER-LICNO > < / TEAMLEADER LICNO >
< / agent >
< / AgentInfo >
< InsuredInfo >
< dmnPERS_NAMEPREFIX PREFIX-TH = "XX" > Dr. < / PREFIX-TH >
XXXXXXX < FIRSTNAME-TH > < / FIRSTNAME-TH >
XXXXXX < MIDNAME-TH > < / MIDNAME-TH >
XXXXXX < LASTNAME-TH > < / LASTNAME-TH >
XXXXXX < FORMERNAME > < / FORMERNAME >
< PREFIX-dmnPERS_NAMEPREFIX-EN = "XX" > Dr. < / PREFIX-EN >
YYYYYY < FIRSTNAME-EN > < / FIRSTNAME-EN >
YYYYYY < MIDNAME-EN > < / MIDNAME-FR >
YYYYYY < LASTNAME-EN > < / LASTNAME-EN >
< BIRTH_DT > 19800101 < / BIRTH_DT >
< 33 YEARS > < / AGE >
< dmnPERNSEXCD = "XX" SEX > male < / TYPE >
< DmnPERC_MAR_STAT_CD MARITAL_STATUS = "XX" > single < / MARITAL_STATUS >
< dmnRACE = "XX" RACE > ZZZ < / RACE >
< dmnRELIGION RELIGION = "H" > HINDU < / RELIGION >
< dmnNATIONALITY NATIONALITY = an' TH' > THAI < / NATIONALITY >
< dmnIDTYPE ID-TYPE = "TI" > Thai National ID < / ID-TYPE >
> ID < AJMPK0001J < / ID >
< ID-XPIR_DT > 20200101 < / ID-XPIR_DT >
< dmnOCCUP_CD OCCUPATION = "XX" / >
< OCCUP_CLASS dmnOCCUP_CLASS_CD = 'XX' / >
< ANNUAL_INCOME > 100000 < / ANNUAL_INCOME >
< HEIGHT > 175 < / HEIGHT >
< WEIGHT > 80 < / WEIGHT >
< / InsuredInfo >
< ProposerInfo >
< dmnPERS_NAMEPREFIX PREFIX-TH = "XX" > Dr. < / PREFIX-TH >
XXXXXXX < FIRSTNAME-TH > < / FIRSTNAME-TH >
XXXXXX < MIDNAME-TH > < / MIDNAME-TH >
XXXXXX < LASTNAME-TH > < / LASTNAME-TH >
XXXXXX < FORMERNAME > < / FORMERNAME >
< PREFIX-dmnPERS_NAMEPREFIX-EN = "XX" > Dr. < / PREFIX-EN >
YYYYYY < FIRSTNAME-EN > < / FIRSTNAME-EN >
YYYYYY < MIDNAME-EN > < / MIDNAME-FR >
YYYYYY < LASTNAME-EN > < / LASTNAME-EN >
< BIRTH_DT > 19800101 < / BIRTH_DT >
< 33 YEARS > < / AGE >
< dmnPERNSEXCD = "XX" SEX > male < / TYPE >
< DmnPERC_MAR_STAT_CD MARITAL_STATUS = "XX" > single < / MARITAL_STATUS >
< dmnRACE = "XX" RACE > ZZZ < / RACE >
< dmnRELIGION RELIGION = "H" > HINDU < / RELIGION >
< dmnNATIONALITY NATIONALITY = an' TH' > THAI < / NATIONALITY >
< dmnIDTYPE ID_TYPE = "TI" > Thai National ID < / ID_TYPE >
AJMPK0001J < ID_NUMBER > < / ID_NUMBER >
< ID_XPIR_DT > 20200101 < / ID_XPIR_DT >
< dmnOCCUP_CD OCCUPATION = "XX" / >
< OCCUP_CLASS dmnOCCUP_CLASS_CD = 'XX' / >
< ANNUAL_INCOME > 100000 < / ANNUAL_INCOME >
< / ProposerInfo >
< ContactInfo >
< AddressInfo >
<! – repeat the nodes below for each address type - >
< address >
< dmnADDR_ADDRTYPE ADDRTYPE = "01" > home < / ADDRTYPE >
< PRIMARY_CONTACT > 0 < / PRIMARY_CONTACT >
< / address >
< address >
< dmnADDR_ADDRTYPE ADDRTYPE "02" = > Office < / ADDRTYPE >
< PRIMARY_CONTACT > 1 < / PRIMARY_CONTACT >
< / address >
< / AddressInfo >
< PhoneInfo >
<! – repeat the nodes below for each type of phone - >
< Phone >
< dmnADRP_PHONETYPE PHONETYPE "01" = > Mobile < / PHONETYPE >
< PHONENUM > 9887666789 < / PHONENUM >
< PRIMARY_CONTACT > 1 < / PRIMARY_CONTACT >
< / Phone >
< Phone >
< dmnADRP_PHONETYPE PHONETYPE "02" = > home < / PHONETYPE >
< PHONENUM > 9887666789 < / PHONENUM >
< PRIMARY_CONTACT > 0 < / PRIMARY_CONTACT >
< / Phone >
< / PhoneInfo >
< EmailInfo >
<! – repeat the nodes below for each type of email - >
< email >
< EMAILTYPE dmnADRO_EMAILTYPE = "01" > e-mail1 < / EMAILTYPE >
< EMAILDATA > [email protected] < / EMAILDATA >
< PRIMARY_CONTACT > 0 < / PRIMARY_CONTACT >
< / email >
< email >
< EMAILTYPE dmnADRO_EMAILTYPE "02" = > Email2 < / EMAILTYPE >
< EMAILDATA > [email protected] < / EMAILDATA >
< PRIMARY_CONTACT > 1 < / PRIMARY_CONTACT >
< / email >
< / EmailInfo >
< / ContactInfo >
< PolicyInfo >
STG102 < BASE-PLAN_CD > < / BASE-PLAN_CD >
< BASE-PLAN_NM > Smart term 10 gold < / BASE-PLAN_NM >
< MODEOFPAYMENT dmnZZFREQUENCY = "M" > monthly < / MODEOFPAYMENT >
< BASE - ITS > 100000.00 < / BASE - SA >
< BASE-PREMIUM > 12000.00 < / BASE-PREMIUM >
< BASE-MODALPREMIUM > 1000.00 < / BASE-MODALPREMIUM >
< AYFP > 13200.00 < / AYFP >
< RiderInfo >
< rider >
RIDER < CODE > ME < / RIDER-CODE >
Medical costs < RIDER-NAME > < / RIDER-NAME >
< RIDER - HIS 20000.00 > < / RIDER - SA >
< RIDER-PREMIUM > 600.00 < / RIDER-PREMIUM >
< RIDER-MODALPREMIUM > 50.00 < / RIDER-MODALPREMIUM >
< / rider >
< rider >
RIDER HAB < CODE > < / RIDER-CODE >
< NAME-RIDER > Admission hospitalization < / RIDER-NAME >
< RIDER - HIS 20000.00 > < / RIDER - SA >
< RIDER-PREMIUM > 600.00 < / RIDER-PREMIUM >
< RIDER-MODALPREMIUM > 50.00 < / RIDER-MODALPREMIUM >
< / rider >
< / RiderInfo >
< / PolicyInfo >
< PaymentInfo >
< borde >
< TMP_RECEIPT_NO > TEMP0001 < / TMP_RECEIPT_NO >
< TOTAL_PYMT_AMT > 13200.00 < / TOTAL_PYMT_AMT >
<! – repeat the nodes below for payment through several channels - >
< payment >
< dmnPAYRTYPE PAYER "01" = > secured < / PAYER >
credit card < dmnPaymentType PYMT TYPE = "01" > < / PYMT-TYPE >
< PYMT-AMT > 13200.00 < / PYMT-AMT >
< PYMT-Channel >
credit <>card
Visa < dmnCardType CARD-TYPE = "01" > < / CARD-TYPE >
< BADGE - N ° > 9890989098909877 < / CARD-NOT >
< HOLDERNAME-CARD > RICKY WHORPHIN < / CARD-HOLDERNAME >
< BANKNM-CARD > Standard Chartered Bank < / MAP-BANKNM >
< MAP SHOWED > 08/14 < / CARD-SHOW >
< MAP-AUTHCODE / >
< CARD-AUTHDATE / >
< / credit card >
< / PYMT-Channel >
< / payment >
< payment >
< dmnPAYRTYPE PAYER "01" = > secured < / PAYER >
< dmnPaymentType PYMT-TYPE = '02' > account < / PYMT-TYPE >
< PYMT-AMT > 13200.00 < / PYMT-AMT >
< PYMT-Channel >
< Bank >
< BANK CODE / >
< BANK BRANCH / >
< BANK-ACCNO / >
< BANK-ACCNAME / >
< / Bank >
< / PYMT-Channel >
< / payment >
< payment >
< dmnPAYRTYPE PAYER "01" = > secured < / PAYER >
< dmnPaymentType PYMT TYPE = "03" > check < / PYMT-TYPE >
< PYMT-AMT > 13200.00 < / PYMT-AMT >
< PYMT-Channel >
< check >
< CHQ - n / >
< CHQ-DATE / >
< CHQ-ISSUEBANK / >
< / cheque >
< / PYMT-Channel >
< / payment >
< / shell >
< RenewalPayment >
< dmnPAYRTYPE PAYER "01" = > secured < / PAYER >
< DDCHANNEL dmnPaymentType "01" = > SDC < / DDCHANNEL >
< DDCDetails >
Visa < dmnCardType CARD-TYPE = "01" > < / CARD-TYPE >
< BADGE - N ° > 9890989098909877 < / CARD-NOT >
< HOLDERNAME-CARD > RICKY WHORPHIN < / CARD-HOLDERNAME >
< BANKNM-CARD > Standard Chartered Bank < / MAP-BANKNM >
< MAP SHOWED > 08/14 < / CARD-SHOW >
< / DDCDetails >
< DDADetails >
< dmnBNK_TYP_CD BANK-ACCTYPE = "01" > save < / BANK-ACCTYPE >
< BANK-ACCNO / >
< BANK-ACCNAME / >
< BANK BRANCH / >
< / DDADetails >
< / RenewalPayment >
< / PaymentInfo >
< BeneficiaryInfo >

< recipient >
Joint < dmnBENE_RELT_CD RELATIONSHIP = "01" > < / RELATIONSHIP >
XXXX < FIRSTNAME > < / NAME >
XXXXX < MIDNAME > < / MIDNAME >
XXXX < NAME > < / LASTNAME >
< PERCENT > 50 < / PERCENTAGE >
< BIRTH_DT > 19800101 < / BIRTH_DT >
< dmnPERNSEXCD SEX = "XX" > female < / TYPE >
< NATLIDNO > TH000001 < / NATLIDNO >
< / recipients >
< recipient >
< dmnBENE_RELT_CD RELATIONSHIP "02" = > child < / RELATIONSHIP >
XXXX < FIRSTNAME > < / NAME >
XXXXX < MIDNAME > < / MIDNAME >
XXXX < NAME > < / LASTNAME >
< PERCENT > 50 < / PERCENTAGE >
< BIRTH_DT > 19800101 < / BIRTH_DT >
< dmnPERNSEXCD = "XX" SEX > male < / TYPE >
< NATLIDNO > TH000002 < / NATLIDNO >
< / recipients >
< / BeneficiaryInfo >
< survey >
< HealthDeclaration >
< question >
Q001 < QUESTION_ID > < / QUESTION_ID >
< dmnZZYESNO_NUM RESPONSE = "N" > n < / ANSWER >
< / question >
< question >
Q002 < QUESTION_ID > < / QUESTION_ID >
< dmnZZYESNO_NUM RESPONSE = "N" > n < / ANSWER >
< / question >
< question >
Q003 < QUESTION_ID > < / QUESTION_ID >
< dmnZZYESNO_NUM RESPONSE = "N" > n < / ANSWER >
< / question >
< question >
Q004 < QUESTION_ID > < / QUESTION_ID >
< dmnZZYESNO_NUM RESPONSE = "N" > n < / ANSWER >
< / question >
< question >
Q005 < QUESTION_ID > < / QUESTION_ID >
< dmnZZYESNO_NUM RESPONSE = "N" > n < / ANSWER >
< / question >
< / HealthDeclaration >
< / questionnaire >
< / ApplicationRq >
< ApplicationRs >
<-reason for the rejection / >
< / ApplicationRs >
< / NewBusinessApplication >
');
l_xsd xmltype: = xmltype (' <? xml version = "1.0" encoding = "windows-1252"? >)
"< xsd: Schema container ="http://www.w3.org/2001/XMLSchema"xmlns ="http://www.example.org"
targetNamespace ="http://www.example.org" elementFormDefault = "qualified" > "
< xsd: element name = "NewBusinessApplication" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "TransactionHeader" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "TR_REF_NO" type = "xsd: Integer" / >
< xsd: element name = "EFF_DT" type = "xsd: String" / >
< xsd: element name = "SRC_SYS_CD" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnSRC_SYSTEM" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ApplicationRq" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "ApplInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "APPLNO" type = "xsd: String" / >
< xsd: element name = "MED_NONMED" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnMED_NONMED" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "APPL_DT" type = "xsd: Integer" / >
< xsd: element name = "EFF_DT" type = "xsd: Integer" / >
< xsd: element name = "APPL_RECV_DT" type = "xsd: Integer" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "AgentInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "The Agent" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "AGT_CD" type = "xsd: String" / >
< xsd: element name = "FIRSTNAME" type = "xsd: String" / >
< xsd: element name = "NAME" type = "xsd: String" / >
< xsd: element name = "AGT-LICNO" type = "xsd: String" / >
< xsd: element name = "TEAM" type = "xsd: String" / >
< xsd: element name = "TEAMLEADER" type = "xsd: String" / >
< xsd: element name = "TEAMLEADER-LICNO" type = "xsd: String" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "InsuredInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = 'PREFIX-TH' >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPERS_NAMEPREFIX" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "NAME-TH" type = "xsd: String" / >
< xsd: element name = "MIDNAME-TH" type = "xsd: String" / >
< xsd: element name = "LASTNAME-TH" type = "xsd: String" / >
< xsd: element name = "FORMERNAME" type = "xsd: String" / >
< xsd: element name = "PREFIX-FR" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPERS_NAMEPREFIX-EN" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "NAME-IN" type = "xsd: String" / >
< xsd: element name = "MIDNAME-EN" type = "xsd: String" / >
< xsd: element name = "LASTNAME-IN" type = "xsd: String" / >
< xsd: element name = "BIRTH_DT" type = "xsd: Integer" / >
< xsd: element name = "ÂGE" type = "xsd: Integer" / >
< xsd: element name = "GENDER" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPERNSEXCD" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "MARITAL_STATUS" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPERC_MAR_STAT_CD" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "RACE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnRACE" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "RELIGION" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnRELIGION" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "NATIONALITY" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnNATIONALITY" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ID-TYPE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnIDTYPE" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ID" type = "xsd: String" / >
< xsd: element name = "ID-XPIR_DT" type = "xsd: Integer" / >
< xsd: element name = "OCCUPATION" >
< xsd: complexType >
< xsd: attribute name = "dmnOCCUP_CD" type = "xsd: String" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "OCCUP_CLASS" >
< xsd: complexType >
< xsd: attribute name = "dmnOCCUP_CLASS_CD" type = "xsd: String" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ANNUAL_INCOME" type = "xsd: Integer" / >
< xsd: element name = "HEIGHT" type = "xsd: Integer" / >
< xsd: element name = "WEIGHT" type = "xsd: Integer" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ProposerInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = 'PREFIX-TH' >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPERS_NAMEPREFIX" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "NAME-TH" type = "xsd: String" / >
< xsd: element name = "MIDNAME-TH" type = "xsd: String" / >
< xsd: element name = "LASTNAME-TH" type = "xsd: String" / >
< xsd: element name = "FORMERNAME" type = "xsd: String" / >
< xsd: element name = "PREFIX-FR" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPERS_NAMEPREFIX-EN" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "NAME-IN" type = "xsd: String" / >
< xsd: element name = "MIDNAME-EN" type = "xsd: String" / >
< xsd: element name = "LASTNAME-IN" type = "xsd: String" / >
< xsd: element name = "BIRTH_DT" type = "xsd: Integer" / >
< xsd: element name = "ÂGE" type = "xsd: Integer" / >
< xsd: element name = "GENDER" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPERNSEXCD" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "MARITAL_STATUS" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPERC_MAR_STAT_CD" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "RACE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnRACE" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "RELIGION" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnRELIGION" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "NATIONALITY" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnNATIONALITY" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ID_TYPE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnIDTYPE" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ID_NUMBER" type = "xsd: String" / >
< xsd: element name = "ID_XPIR_DT" type = "xsd: Integer" / >
< xsd: element name = "OCCUPATION" >
< xsd: complexType >
< xsd: attribute name = "dmnOCCUP_CD" type = "xsd: String" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "OCCUP_CLASS" >
< xsd: complexType >
< xsd: attribute name = "dmnOCCUP_CLASS_CD" type = "xsd: String" / >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ANNUAL_INCOME" type = "xsd: Integer" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ContactInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "AddressInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "Address" maxOccurs = "unbounded" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "ADDRTYPE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnADDR_ADDRTYPE" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "PRIMARY_CONTACT" type = "xsd: Integer" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "PhoneInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "Phone" maxOccurs = "unbounded" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "PHONETYPE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnADRP_PHONETYPE" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "PHONENUM" type = "xsd: Integer" / >
< xsd: element name = "PRIMARY_CONTACT" type = "xsd: Integer" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "EmailInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "Email" maxOccurs = "unbounded" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "EMAILTYPE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnADRO_EMAILTYPE" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "EMAILDATA" type = "xsd: String" / >
< xsd: element name = "PRIMARY_CONTACT" type = "xsd: Integer" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "PolicyInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "BASE-PLAN_CD" type = "xsd: String" / >
< xsd: element name = "BASE-PLAN_NM" type = "xsd: String" / >
< xsd: element name = "MODEOFPAYMENT" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnZZFREQUENCY" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "BASE - SA" type = "xsd: float" / >
< xsd: element name = "BASE-PREMIUM" type = "xsd: float" / >
< xsd: element name = "BASE-MODALPREMIUM" type = "xsd: float" / >
< xsd: element name = "AYFP" type = "xsd: float" / >
< xsd: element name = "RiderInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "Rider" maxOccurs = "unbounded" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "RIDER-CODE" type = "xsd: String" / >
< xsd: element name = "RIDER-NAME" type = "xsd: String" / >
< xsd: element name = "RIDER - SA" type = "xsd: float" / >
< xsd: element name = "RIDER-PREMIUM" type = "xsd: float" / >
< xsd: element name = "RIDER-MODALPREMIUM" type = "xsd: float" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "PaymentInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "Bordered" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "TMP_RECEIPT_NO" type = "xsd: String" / >
< xsd: element name = "TOTAL_PYMT_AMT" type = "xsd: float" / >
< xsd: element name = "Payment" maxOccurs = "unbounded" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "PAYER" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPAYRTYPE" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "TYPE PYMT" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPaymentType" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "PYMT-AMT" type = "xsd: float" / >
< xsd: element name = "PYMT-Channel" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "CreditCard" minOccurs = "0" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "CARD TYPE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnCardType" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "CARD-NO" type = "xsd: Integer" / >
< xsd: element name = "CARD-HOLDERNAME" type = "xsd: String" / >
< xsd: element name = "CARD-BANKNM" type = "xsd: String" / >
< xsd: element name = "CARD-DISPLAYED" type = "xsd: String" / >
< xsd: element name = "CARD-AUTHCODE" / >
< xsd: element name = "CARD-AUTHDATE" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Bank" minOccurs = "0" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "BANK CODE" / >
< xsd: element name = "BANK-BRANCH" / >
< xsd: element name = "BANK-ACCNO" / >
< xsd: element name = "BANK-ACCNAME" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Cheque" minOccurs = "0" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "CHQ - NO" / >
< xsd: element name = "CHQ-DATE" / >
< xsd: element name = "CHQ-ISSUEBANK" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "RenewalPayment" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "PAYER" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPAYRTYPE" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "DDCHANNEL" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPaymentType" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "DDCDetails" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "CARD TYPE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnCardType" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "CARD-NO" type = "xsd: Integer" / >
< xsd: element name = "CARD-HOLDERNAME" type = "xsd: String" / >
< xsd: element name = "CARD-BANKNM" type = "xsd: String" / >
< xsd: element name = "CARD-DISPLAYED" type = "xsd: String" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "DDADetails" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "BANK-ACCTYPE" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnBNK_TYP_CD" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "BANK-ACCNO" / >
< xsd: element name = "BANK-ACCNAME" / >
< xsd: element name = "BANK-BRANCH" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "BeneficiaryInfo" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "Recipient" maxOccurs = "unbounded" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "RELATIONSHIP" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnBENE_RELT_CD" type = "xsd: Integer" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "FIRSTNAME" type = "xsd: String" / >
< xsd: element name = "MIDNAME" type = "xsd: String" / >
< xsd: element name = "NAME" type = "xsd: String" / >
< xsd: element name = "PERCENTAGE" type = "xsd: Integer" / >
< xsd: element name = "BIRTH_DT" type = "xsd: Integer" / >
< xsd: element name = "GENDER" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnPERNSEXCD" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "NATLIDNO" type = "xsd: String" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "Questionnaire" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "HealthDeclaration" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "Issue" maxOccurs = "unbounded" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "QUESTION_ID" type = "xsd: String" / >
< xsd: element name = "ANSWER" >
< xsd: complexType >
< xsd:simpleContent >
< xsd:extension base = "XSD: String" >
< xsd: attribute name = "dmnZZYESNO_NUM" type = "xsd: String" / >
< / xsd:extension >
< / xsd:simpleContent >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< xsd: element name = "ApplicationRs" >
< xsd: complexType >
< xsd: SEQUENCE >
< xsd: element name = "Reason for rejection" / >
< / xsd: SEQUENCE >
< / xsd: complexType >
< / xsd: element >
< / xsd: SEQUENCE >
< xsd: attribute name = "xsi" type = "xsd: String" / >
< xsd: attribute name = "schemaLocation" type = "xsd: String" / >
< / xsd: complexType >
< / xsd: element >
< / xsd: Schema >
');
BEGIN
dbms_output.put_line (Ali$ XML_VALID (l_xml, l_xsd));
END;

and please do not confused, you don't need to answer if I do not any sense.

BUT I STILL HAVE ONE LAST QUESTION

do you know how to use namespaces in the exctractvalue().

I'm not "troubled", just frustrated that you don't seem to understand what I've explained so far.

Why do you insist on the use of extractvalue? Don't use extractvalue, it is deprecated, use XMLTABLE instead.

If you feel compelled to use extractvalue of certain grounds, just the curiosity to seek it in the documentation, you can find the syntax to use the namespaces:

http://docs.Oracle.com/CD/E11882_01/server.112/e41084/functions061.htm#SQLRF06173

in your last code, you first insert the XML and extract data from it. I can do it too, but it's not my requirement. I'm supposed to read the first xml (if it is valid) as I do in my code using the table function and make the continuation of the procedure.

Look, I'll ask you one last time:

What problem are you having? What prevents you from first reading, certain values before inserting, as you need. Just use the same query XMLTABLE that I showed in my example, except you will not query the table, but directly from the XMLType variable:

PASSAGE v_xml

COLUMNS...

Problems of Muse with iPad/iPhone and opera

Hello

I'm working on a website in Muse and exper amiencing a few problems that I hope fulsomeone can help with that. Namely, both an iPad and an iPhone the site is alignment left (instead of Center) a tdit foremove is notof tiles / develop 100% browser width because it is configured for this purpose. You view the site at www.graficus.com/beta_wti ac

Covernally on the rtopside, when the site is opened using the browser Opera, I get a pop-up message on most of the pages indicating "some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. "I do not get this message other eyebrows ersand pages visually seems correct.

All tho ughts?

One last question... is possible to have the center the white content area expand vertically automatically to keep the background fill from shright above the footer area of a page, without having to put in place several masks (as ha Ivdone e) for various page lenGTH?

Appreciate any help! Thank you!!

I checked the site and it seems that you have understood the issues mentioned here. If still the same problems, please let me know.

Thank you

Sanjit

problem of analog with PCI-6115 and BNC-2110

Similar Questions

Maybe you are looking for