problem of answering machine after update from z3 to lollipop

Similar Questions

• Problem of GPS location after updating to IOS 10

  Anyone have problems with GPS location problem after update from IOS10?

  I drove Baltimore DC Regan airport, I tried with apple and Google map yesterday map, location was far from the highway, he could not determine where we are, we were on the road, but he kept us showing that we were on a local road to the highway.  Could not find 90% of time on my road.  Finally, I have to use my phone to brother with IOS9, we were fortunate that it has not updated to the most recent IOS 10.

  I wonder if anyone has the same problem after the update.

  Hello yinchiu85,

  I understand that your iPhone seems to have a hard time determining its location precisely. Fortunately, there are a number of steps you can take to help improve the accuracy of the information.
  

  Improve the accuracy of GPS

  GPS accuracy depends on the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. To improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
  • Keep a clear vision in several directions. Walls, vehicle roofs, buildings of great height, mountains and other obstacles can block the line of sight to GPS satellites. In this case, your device uses Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  If your iPhone is still unable to pinpoint your position, the next step would be to restore location Services.
  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  On privacy and location in iOS Services 8 and later versions
  https://support.Apple.com/en-us/HT203033

• Problem in reboot loop after updates.

  I have windows XP on an Asus A8V-E-SE motherboard has developed a problem in reboot loop after updates.  It will not go in safe mode either.  Stop at a display of the driver.  I used the recovery console using the XP cd and you can see the update directories in the systemroot folder.  I followed the instructions in the forum to uninstall every update by accessing commands back to the subdirectory spuninst update and then run "Batch spuninst.txt.  I get a bunch of 'access denied' messages for each of them (varies in amount of "access denied" messages by everyone but consistent for each.)  It's not like the batch uninstall for the update does not work.  I tried to uninstall all updates yesterday 10/02/10 (I had 10) even with the "access denied" messages, but it still will not initialize properly.  No way to move the access denied message?

  See the RESPONSE (by Kevin Hau) message in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• nik software/filters have gone after update from version 2015cc photoshop?

  nik software/filters have gone after update from version 2015cc photoshop?

  Hello

  Must copy CC 2014 Photoshop plugin folder and replace the file in Photoshop CC 2015.

  In windows, please go to C:\Program Adobe Photoshop CC 2014. Copy the plugin folder

  and paste the folder inside the Photoshop CC 2015

  In Mac, please go to application. There will be a folder of Photoshop CC 2014 inside it will be a plugin folder and copy it and replace the same folder in Photoshop CC 2015.

  Let us know if this helps

  Thank you

• How can I get Acrobat Pro XI after update from DC

  How can I get Acrobat Pro XI after update from DC

  From:

  Acrobat DC uninstalled Acrobat XI | How to get Acrobat XI

  If you have a creative cloud subscription, which includes Acrobat Pro, you automatically get a free upgrade to Acrobat Pro DC. Before installing Acrobat DC, CC desktop application must uninstall any previous version of Acrobat. Having several versions installed can lead to errors and software conflicts. Follow the steps below to reinstall Acrobat Pro XI.

  It's great, that you're still all of your old versions. Most of the people don't. You are the exception. Not the rule.

• I can't delete cookies after update from version 9.0.1, also the opening, I have 2 new cookie files that disappear at the close of FF.

  I have uninstalled/reinstalled 9.0.1, is the same thing. Check my profile, cookies.sqlite is if FF is closed or uninstalled. When installed and opened, I have 2 new files, wal - cookies.sqlite and cookies.sqlite - shm, as well as of cookies.sqlite. Is this the reason why I can't delete cookies? Also, I and enabled AdBlock Plus and the navigation of private life. After update, I can't post anything in support of FF (this is my 4th attempt, Safari finally used to post) and files under Tools, as clear history are accessible, I shouldn't have a history to remove.

  (1st edition)
  Ok. I reinstalled FF 9.0.1 Safari, but not directly from Mozilla. I used CNet, now things work as they should. I have no cookies listed, except those I want. Private browsing does not work correctly. However, I still have these 2 additional cookie files; -wal-shm.

  (2nd edition)
  I spoke too soon. After accessing sites that I frequent, the 'ad' cookies are back (adbright, realmedia, 247realmedia) and cookies from the site are eliminated, only not here, spent. Now I can't connect to anything and am back to Safari to access the Support Forum of FF. Have I not a bug? Someone please help, I'm desperate, I hate IE, Safari, Chrome, etc. They have neither the level of ad and pop elimination - up that Firefox has; and they don't have the level of customization that Firefox has. 2 additional cookie - wal-shm files, are always there when FF is open and disappeared again the closure of FF. One last thing, I noticed, I have a request of support for Chrome file in my library. The cookie file Chrome could interfere with the FF cookies? I do not think, I have Safari, as well, and no browser has ever interfaced with each other before.

  (3rd edition)
  I have uninstalled/reinstalled FF, all my modules and also tried to delete the cookies.sqlite document in the FF profile file, nothing happens. I counted, there are 14 sites listed in preferences > privacy > pane show Cookies (no pun intended) and they are all sites of "ad". These sites are also listed as sites blocked in Adblock Plus. Until a person pick up, I give up, I don't know what else to do. He there was that the only time that cookies were gone pane show Cookies, every other time I have uninstalled/reinstalled anything, they were still there. So, until someone can help me, I'm stuck. The only thing I did is removed altogether-profile file. It's the last thing I want to do, unless I can save my favorites somewhere to return after reinstalling. If this is not corrected in the next few days, I can just try, too.

  I think I solved my problem. I activated the safemode, then activated each Add on, one at a time, reboot FF between each activation. I don't have the add-on TACO. I hope this is the end. Thank you for your response. I appreciate it.

  Little puzzle, this particular post was not the first in which I posted this question. However, it is the only one that I thought was actually posted on the forum. The first two attempts, I thought had not displayed. Today, there are all the posts with the same problem. So, I really thank Mozilla for their patience and all the people who have taken the time to read this and the other two positions. I apologize for the repeated messages. I really didn't know that they had been posted because I couldn't find their afterwords to edit with my attempts to fix this problem.

• RUNDLL error after update from lenovo

  After installation, updates from Lenovo update I always get "rundll" error when I start the system with the message: there was a problem starting C:\Program the specified module could not be found.

  I have new E531 with Windows 8, and after that the updates of Windows was all right.

  Please help me with this problem.

  Thank you

  I found the solution, the problem is with the last update

  http://forums.Lenovo.com/T5/ThinkVantage-Technologies/Lenovo-settings-dependency-package-1-2-0-21-do...

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.

• Problem with the gallery after update 2.3 music

  Hello

  Recently updated my XperiaX10i (French version, not operator sim locked). No problem with the update itself and the phone seems to work fine.

  But, the music gallery has first not detected music files already in the sd card 32 GB (no problem for photos, videos or other files), and does not so load in the library. I had to download them all again through Media Go and now the library shows them, but album covers are not more in the album list as in version 2.1, which was very convenient for the selection, however the sleeves appear in the background during playback of a track: this looks more like a bug than anything else.

  I am also missing the first Quick Launch bar application for Wifi, Bluetooth, GPS, sync and the brightness of the screen, it seems that the launch of all these features to go into the settings file now.

  In conclusion, I hardly see what exactly improved on this phone since version 2.1. except maybe the speed and the quality of the screen display.

  Update from 1.6 to 2.1 was a total revolution in comparison.

  Power control widget is always there

  

• PXE - E53: no boot after update from Dell file

  In recent weeks, I have a new inspiron 5999. yesterday, there was an update from dell and the computer restarted I had a black with screen

  Intel UNDI, PXE - 2.1 (build 083) Copyright (C) 1997-2000 Intel Corporation
  This product is covered 459 by one or more of the following patentsL US5, 307, US5, 434, 872, US5, 732, 094, US6, 570, 884, US6, 115, 776 and US6, 327, 625
  ADR MAC CLIENT: 18 03 73 11 F9 00 GUID 44454C4C-4700-1034-8035-B8C04F4E5131 PXE - E53: no boot file name given
  PXE - M0F: Exit PXE ROM.
  Reboot and select proper boot device
   
  What should I do now and what should I do to avoid this problem in the future?

  Go to the startup F2, boot sequence option, select UEFI, apply, exit and should start normally. I got this Dell and it worked for me. Good luck to both of you!

• Printers won´t works after update from HP!

  Hello!

  New here and the Sweden so please forgive me for my bad English ;-)

  My dad has a computer with several different printers attached to it. He did some advertising in his office work, such that it has a big HP printer (111 something), printer of a brother, a Dymo LabelMaker and a C822 OKI color printer. The computer is a HP Pavilion that the guy in the computer shop assembled for him. Works in Windows 7, it is converted to XP because some of our programs require it.

  So, the problem is that last week updated HP (or not, because I think that the green bar stopped in the middle) something on his computer. After that, none of the printers worked!!! I have re-installed the Dymo and managed to do that work again. No problem. Done the same with the brother. Works like a charm. Downloaded the latest firmware for the OKI C822 and tried to print a web page. No problem. But then we opened a document in Microsoft Publisher 2007, which is the program that my father always use, and he has done this for the past two years. The won´t printer print nothing! A large yellow rectangle appears in the lower right corner, saying that "the printer cannot print the document" blah, blah. And the display on the printer even doesn´t the light upwards, it just says: ready to print. Nothing more. Please, help me with a solution... I tried a system restore on the eve of the update of hp, but the computer didn t want to go this way. Anyone... ?

  That s true!

• error after update from skillbuilder modal plugin 1.10 to 2.0 page

  All,

  Ive this problem after upgrading from 1.10 to 2.0 skillbuilder.

  In my apex 4.2 application I have been using the modal popup 1.10 plugin skillbuilder but now I've upgraded to 2.0 and windows pop up display property pages show just partially as inframe but I already have my security Embedded in the value = allow

  I also tried category = component/effect/running etc.

  What could be the problem here?

  Thanks in advance.

  It worked after re-installing... great

• Tecra S1 - problems with the touchpad after update BIOS to 2.50

  Hello
  After the BIOS-update to version 2.5, the touchpad does nothing. From the docking station, the l' option option mouse PS2 works without any problem. Starting late, the touchpad no longer works. Normally - before the update - the touchpad began its work immediately after starting not rooted.
  What can I do to reactivate the touchpad?
  Juvenay clevain

  Hello

  Are you sure that your touchpad was not disabled?

  I mean the FN + F9 key combination to activate and disable the touchpad.

  This is why you should check this first.

  On the other hand a 3rd mouse driver part could affect the functionality of touchpad too.

  In my opinion, you should try to reinstall the driver for the touchpad and test it without connected part 3 mouse.

  Good luck

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar