Problem of base color Panel

Similar Questions

• Cannot change the base color by typing the values

  I tried RGB CMYK and Hex and I can't change the base color of red. The only way I've been able to make changes are with the sliders or the wheel. Have I missed a button or a step somewhere?
  I type the numbers in the boxes below the colors and nothing happens.

  Hello
  Yes, currently the Panel values/color sliders are all or nothing. We are aware of the problem and are working to fix it. Thanks for your patience!
  Saami

• My color Panel thinks it knows better than me. : r

  Hiya there!

  This could turn into a bug report, I don't know. I really hope that I have not asked a question to repeat.

  For some time I use Photoshop CC thingy color Panel perfectly well with my good 2010 ol ' Bamboo Wacom tablet... but on all 5-6 change of color that I do with the stylus (maybe more often, it's frustrating often), the color will snap back to the original color, I already had, or I think it snaps to a different color is along a path where my cursor may travel before coming to a stop. I have not really well, evaluated according to me, but it's a little erratic.

  Fortunately, he does not have it with my mouse, but he do when my stylus pressure is less than some sort of threshold... I think so. If I start to drop on the pressure, even if I keep technically a click when searching for this color I want up and down the Tint slider, which makes any component snap by little I didn't have color. , But it would make sense then why the mouse never fails: it has two speeds of pressure: 0 to maximum.

  I recently changed the "tip feel" my pen stylus via the preferences of bamboo, but when I changed them back again to see if this is what caused the problem, it doesn't seem to make a difference. Any way I have it.

  I have also upgraded to Windows 7 to 10 32 Bit and also changed the resolution on my monitor, but I really doubt it would be the source of the problem.

  I have 2 Coolorus as replacement of a dandy, but it takes a while to start, and there are some "sticky lag" when using the stylus, make it harder for more fine adjustments on the wheel itself, but I digress.

  Anyway, does anyone have an idea how to fix this?

  
  See you soon,.

  Jon

  The only time where he should align, it's when the web colors is enabled. But then you'd see obvious color instead of a gradient changes.

  Have you tried to update the video driver, driver of the Tablet? If this does not help, try to reset the preferences. Ctrl alt shift at the same time as Photoshop starts.

• How Illustrator choose the base color when creating a new group of colors?

  I'm just curious on all selection and the creation of the Group color process.

  

  On the above document, I have 5 rectangles of the same size, filled with 5 different colours. If I type Cmd + A to select all, then go into the swatches Panel and click on "New color group", I got the color group marked as G1 in the image above.

  If I want the colors appear in the same order (G2 in the picture), making the left most red color as the base color, I must first create an empty group, and then add each sequence color myself.

  So I wonder how Illustrator decides what color take it as the base color?

  I think that it is the angle of the color first, and then S B or vice versa.

  Stacking order is not serious.

  But why is this important to know?

• Problem with the swatches Panel

  There is a problem with my Swatches Panel.

  When I select an object that can be colored in the page, such as a box, I choose a color for it in the swatches Panel. but, the little icon top left of this Panel that normally indicates if the color is applied to the fill or line, is empty. I can click on the arrows swap fill and stroke, near the icon and the fill and stroke will swap; but the icon is empty... just gray.

  Indicators of background and outline in the Panel of colors and the toolbar but displays correctly, however.

  The swatches Panel is displayed correctly when logged in another account.

  I'm on a Mac and tried to screw up the "idcs5_Swatches Panel.mxi" and "idcs5_Swatch Library Panel.mxi" files or not available.

  Is there another file I should try screw up? Could this be a conflict with another program?

  Thank you!

  Have you tried to screw up your general preferences?  Link here...

• HP LaserJet 100 colorMFP M175n: PROBLEMS of PRINTING COLOR

  Every time I print a document in color I get a trail massif color left on the paper and should choose to print 2 or more pages, the pages get darker. When I select 'black' there is no problem.

  Help please

  John

  Hi @john9745 ,

  I see that you are having problems printing in color. You get a trail of color on the page. I'd love to help you.

  I have provided a document to run a cleaning, calibration, and printing reports to determine which toner is causing this issue. Solving print quality problems.

  How is the printer connected? (USB, Ethernet, WiFi)

  You use Genuine HP Toner?
  What are the levels of toner?

  What were the results of the Diagnostics page and the page of print quality?

  You can attach a sample of the pages if you wish.

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• Problem with printer color ink large format 7500 has

  Having a problem with the color cartage 920XL

  I tried to print several photos of 4 x 6, where the first is fine and 1/2 way through the other, it starts to print only red

  installed 3 new cartridges, printer head cleaning color, alignment and began to print 4 x 6 photos and the same thing happened.

  Help, please

  I just bought 3 920 new (no large capacity) and was going to try a 3rd time but whated to here from you

  Thanks Mike

  Hi SchneiMB,

  Try the following solutions in the order presented to resolve the issue. When one of the solutions solves the problem, there is no need to continue troubleshooting.

  Troubleshooting print quality problems

• How can I add lut to the lists in the new color Panel

  Is it possible to customize the list of read?  Release n the new 2015 CC, I wish I could add resembles the dropdown lists that appear in the color Panel.

  I have a lot of looks in different formats that I downloaded on my PC.  I know that I can navigate to them from the color Panel, but I would like to permanently add to the drop-down list so I can choose quickly between them.

  Is there a way to do this?  I tried to copy and paste the downloaded files in the same folder that the looks that are already listed.  This adds the new looks to the LUT under Basic Correction entry list, but not the list of Look under Creative, and it would be nice to make them appear under both.

  In addition, it would be even better to also remove lut that I won't use.

  I hope this question makes sense!

  addition of LUT Lumetri color? Adobe community

• How can I change the base color in the work of Recolor settings?

  How can I change the base color in the work of Recolor settings? I know that this seems a silly thing but I really need to figure this point and I have read and went through the manual and the forum for help, without result. Help, please.

  Click the color you want in the "new color" column. Then click the base color next to the list of color harmonies, which will change then, but the harmonies of color will depend on your desired color.

• Color Panel

  I am more able to access my color Panel in InDesign CS 5.5. It is just grayed out. I can switch to the sliders, but can't access it either. No idea why this is happening?

  Change your preferences

• The color Panel offers only cursors in grayscale

  I followed one of the Deke turtorials, and included using the color Panel. When I went to the window/color, I've only available gray slider. The others are all grayed out. I don't think I changed anything which would have had an impact on this, but I don't know.

  Suggestions for other available file cursors?

  Barry

  At the time you access this Panel, you have a channel current color, or maybe a layer mask?  Make sure that you click the icon on the left (that is, to make the image color the current focus of operations) in the layer of the image in your LAYERS Panel.

  -Christmas

• How to set the STL as "Color Panel" method of collection of default?

  I prefer HSB for picking colors, if I'm in CMYK or RGB, but my choice does not stick. I'm changing it back to HSB. Is it possible to force the STL to be default in the color Panel?

  Thank you.

  Unfortunately, no.

  He always wants to go back to the color mode of the document. Nothing you can do about it.

• problem with the color picker tool

  Hi there we use Fireworks CS3 and seem to have problems with the color picker tool.
  
  When we hover over a color and select it, we do not get the same color. Sometimes, we choose a blue color and it translates into a green.
  
  Also when we have a color for example chabouni and reduce the color so something lighter, he returned to the Carter.
  
  Can anyone suggest what might be the problem.
  
  This has only started happening recently and nothing major has been installed or removed from Fireworks.
  
  See you soon
  LTA

  Hi Alex,

  Im not sure if you said today or not.

  "Your a chamption!

  Thanks for your help, it works perfectly now.

  I must have accidentally clicked on the nod to the colors for the Web.

  Cheeers
  Malcolm

• Lumetri Color Panel not showing fixed base

  Hello

  I updated PremiereCC to date and take advantage of the color of lumetri, but suddenly the basis of correction of the Panel part does not appear even if it is checked. Ive updated, closed Panel and opened, checked and unchecked the pane, undocked the Panel and make the full screen.  When I click on the bar of "Basic Correction" real in the Lumetri Panel, he describes the options for probably a millisecond but him disappear.

  I don't know what the problem is, is there a way to reset the panels as you can reset tools in other adobe programs? Or maybe clear my cache?

  Best,

  Parker

  [transferred to Premiere Pro]

  two suggestions of "another thread with a similar problem" had to "solo mode - in lumetri color dropdown Panel ' and the other was to"restart the computer and launch the first while resetting preferences.

  What happens when you hold the control by clicking on (but I suspect that you have Mac - if command) - I hold control while clicking on, all the panels lumetri open (or close). Not that this will solve your problem, but strange that your other options lumetri are open and will remain open, but your basic correction is closed and remains closed. Holding control while clicking on not done anything to any of the lumetri options?

• Problems with css-designer panel

  Cannot display properties selectors/CSS - just gives me a grey area empty. When I click in the grey, dreamweaver crashes.

  Does anyone have similar problems and can help?
  Thanks in advance!

  (OS X 10) 7 5. (/ macPro)

  I found a solution that worked for me.

  I removed all the fonts Adobe CC installed out of my library folder: fonts and just left in the base fonts Apple as Arial, Courier etc... Launched Dreamweaver CC and the designer CSS panel work. I don't know exactly what font it is, or creates the conflict. All I know is it works fine now.