Problem of Data Mover

Similar Questions

• Failed to load movies Netflix in Media Center message appears to indicate there was a problem of data recovery. Check the works of your internet connection and try again.

  Original title: cannot load Netflix movies in Media Center

  Netflix photo click on the message appears indicating a problem of data recovery.  Check the works of your internet connection and try again.

  Hi Barbarasimonetti,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: You can follow the steps described in the article below

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  http://support.Microsoft.com/kb/972496

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Install PT8.53 with Linux problem: unable connect in Bootstrap Mode of Data Mover

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  I've been setting up PeopleTools 8,53 Instance database. Because the Wizard installation problem, I created PeopleTools 8,53 Database Instance PT853 manually. I have run the following scripts:

  (1) utlspace.sql

  (2) dbowner.sql

  (3) psadmin.sql

  (4) psroles.sql

  (5) connect.sql

  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance. I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853

  Connection type: default database

  "TCP/IP Protocol".

  Host: 192.168.196.102

  Port: 1521

  Listener: LISTENER

  Protocol: TCP/IP

  Host: 192.168.196.102

  Port: 1521

  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same as below:

  NET Service Name: PT853

  Protocol: TCP/IP

  The host of the database Machine name: 192.168.196.102

  Port: 1521

  Name of the Basic Service: PT853

  Connection type: default database

  I test the connection using 'SYSADM' and it is successful as well. This means that Windows XP database Client can connect with the server database Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover cannot connect in Bootstrap Mode using "SYSADM". Its details are below:

  Configuration manager:

  Type of database: Oracle

  The database name: PT853

  User ID: SYSADM

  Connect ID: people

  Connect password: people

  Data Mover:

  Type of database: Oracle

  User ID: SYSADM

  Password: SYSADM

  When connect in Bootstrap Mode of Data Mover, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  Based on my understanding, in the Oracle database, the Data Mover Bootstrap mode connection requires a PSDBOWNER table with a 'Database name PT853 and UserID SYSADM' entry.

  The problem is that the PSDBOWNER table doesn't have a line after that I run 5 scripts above. I am looking at runs 5 scripts one by one as below:

  (1) running the utlspace.sql script creates spaces of table 2 (PSTEMP, PSDEFAULT). This script can not create 2 storage spaces. So, I created 2 tablespaces manually.

  (2) running the psdbowner.sql script creates the PSDBOWNER table. This script creates the PSDBOWNER table successfully, but the last line by pressing "connect system/manager", had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (3) running the psroles.sql script created the roles PSUSER and PSADMIN. This script runs successfully without error.

  (4) running the psadmin.sql script creates ownerID SYSADM and ownerID password SYSADM. When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (5) running the connect.sql script creates connectID 'people' and connect password "people." This script runs successfully without error.

  My questions are:

  First of all, in the database Oracle Linux 5 server machine, when I created the instance of database PT853 using DBCA, on the management of the password for the user 'system', I unlocked it and change his password for 'system '. It causes the scripts 'psdbowner.sql' and 'psadmin.sql' got the error "username and password"? If so, how to fix?

  Second, after you run 5 scripts above, why there is no line in the table for Data Mover Bootstrap PSDBOWNER to open a session? How to solve this problem?

  Thirdly, can I just insert a line 'PT853 SYSADM' into the table PSDBOWNER for Data Mover Bootstrap to open a session?

  Thanks in advance.

  By default, the password of the population is peop1e.

  Once more, you shouldn't do anything 'manually' on the database, scripts do everything for you. Unless something is wrong.

  > When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  I really wonder why ignore the error. This meant everything that your system password is not responsible, but something else that you set when creating the database. Never happens to you to check the script before you run it and change it if necessary?

  Nicolas.

• Connection Data Mover & Appdesigner problem

  Hello
  
  Enter below the error message mentioned in connection in Data Mover & Appdesigner
  
  "The database is free 8.51. The PeopleTools running require databases during the liberation of 8.52. ».
  
  This error message occurred after completing a 6-15-1 task: filling the Tables in the PeopleSoft database.
  
  Server details:
  
  Peoplesoft FSCM 9.1 Feature Pack 2 version request: V29133-01
  PeopleTools 8.52.11: Patch 14513380
  Oracle DB version: 11.2.0.1.0 - Production
  File/Batch/DB server: 2008
  
  Please advice.
  
  Kind regards
  Vikas
  
  Published by: 973585 on December 14, 2012 22:39

  As Nicolas says you need a short walk over to your PT8.51 database PT8.52.11 of preforms. Rel852n.SQL running is only a first step.
  As described in Chapter 7 finalization of database configuration of the Setup Guide of 8.52 PeopleTools to upgrade your PeopleTools to 8.52.11.

  I still don't understand that you have downloaded FSCM 9.1 Feature Pack 2: V29133-01 and that is comes to 8.51.
  I installed it a month ago and the same installation file was delivered to PT8.52.

  Rather than upgrade your current database to PT8.52.11, I would say to download FSCM 9.1 Feature Pack 2: V29133-01 new and recreate your database.
  Why do I say that?
  Because you clearly have an incorrect download and also missing patches that come preinstalled with FP2 review recut for this purpose.
  Download FSCM 9.1 Feature Pack 2: V29133-01 and recreate your database, this way you ensure that your installation has FP2 and all patches up to FP2 preinstalled. This will save you a lot of time...

  Halin

  Published by: Hakan Biroglu on December 16, 2012 14:17

• Upgrade question when on task 2-13-8: running the utility rename Data Mover

  Currently of the problems when you try to perform this task in the wizard to change.  When Assistants change automatically runs the engine program of Application UPG_REN_DMS, that fills the Data Mover rename script.  We eventually found an error.  We really do not understand why this is happening.  We also tried to launch the application in mode of two levels and still get the same error message.

  Upgrade of renaming process started: 2015-05-13 - 09.28.31.000000 (18030,8)

  The D:\peoplesoft_update\output\HCM91to92_PI9_AppOnlyxml_HCUPG1_InitialPass\\rnupgrcdfld.dms file open failed: no such file or directory. (2 633) UPG_RENAMES. Utilities.OnExecute name: openLog statement PCPC:1231: 27

  Called from: UPG_RENAMES. Utilities.OnExecute name: DeleteFile statement: 73

  Called from: UPG_REN_DMS. PRINCIPAL. GBL.default.1900 - 01 - 01.CleanUp2.OnExecute statement: 2

  Game number of messages: 2

  Number of messages: 633

  Reason for the message: the file %1 failed: %2. (2 633)

  Treat 30055 ABENDED to step UPG_REN_DMS. PRINCIPAL. CleanUp2 (PeopleCode) - RC = 8 (108 524)

  Game number of messages: 108

  Number of messages: 524

  Reason for the message: treat 30055 ABENDED to step UPG_REN_DMS. PRINCIPAL. CleanUp2 (PeopleCode) - RC = 8 (108 524)

  Process %s ABENDED to %s.%s.%s (step %s) - RC = %s

  The AE UPR_REN_DMS generates the rnupgrcdfld.dms with data imported from version 9.2 on a previous step. It seems that EI is not able to find the D:\peoplesoft_update\output\HCM91to92_PI9_AppOnlyxml_HCUPG1_InitialPass\\ directory. Please make sure that the directory of output on the tools-> Options - general tab do not have a double slash reverse and also make sure that the directory exists. Please post another reply after the control if you are still not able to execute the step.

• Data Mover, lack of PeopleSoft HCM system database - shows only DMO

  I install HCM 9.2 with PT 8.53 on Windows Server 2008 R2.

  Here's what I've done so far for the installation:

  Binary database Oracle - 64-bit

  Oracle client - 32-bit

  Oracle Database patch (I applied Patch 18940194: ORACLE 11 G 11.2.0.3 PATCH 32 BUG for WINDOWS (64-BIT AMD64 AND INTEL EM64))

  JDK

  WebLogic

  Tuxedo (restart the computer after the installation of Tuxedo)

  PeopleTools 8.53

  Patch PeopleTools (I applied Patch 18495092: PT 8.53.13 PRODUCT PATCH)-minimum 8.53.02 required for HCM9.2

  Install the software of PeopleSoft - HCM 9.2 application

  Configure Configuration Manager

  Install the database

  -CREATEDB10. SQL (as sysdba)

  -UTLSPACE. SQL (as sysdba)

  -DBOWNER. SQL (as sysdba)

  -HCDDL. SQL (as sysdba)

  -PSROLES. SQL (as a manager/system)

  -PSADMIN. SQL (as a manager/system)

  -CONNECT. SQL (as a manager/system) * specify people/peop1e for the username and password login ID

  Now, I'm at the stage where I run Data Mover "Database Setup".  The question is, I don't see the "PeopleSoft HCM SYS to database - US English" option.  I returned and checked my HCM application 9.2 install logs and everything has been installed successfully.  Why is this lack?  Why do I see only the database of demonstration of HCM?  Did I miss a step?  When to update the database to reflect the PT 8.53.13 patch?  At what point can I run HCINSSYS. DMS?

  

  I discovered he is a documented Bug.  Oracle says that when we click on the option button 'System', appears "PeopleSoft HCM Demo Database - US English" but it was typo and it's really the PeopleSoft HCM system database.

  On MOS, see: list of Application Peoplesoft in DB installation appears not HCM HR database

  What points you:

  Bug 16636276 - DCW SAYS DEMO WHEN TRYING to INSTALL the SYSTEM DATABASE

  has been created to solve the problem

• Install PT8.53 with Linux question: connection process Data Mover and application designer

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture.

  Server database is the database Oracle 11 GR 1 material.

  Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually by using starter PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  
  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.

  I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same, and the connection is successful as well. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  This means that Windows XP can connect to Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover and application designer cannot open a session in PT853 Instance of database in the Linux Server machine. Its details are below:

  Configuration manager:
  Type of database: Oracle
  The database name: PT853
  User ID: SYSADM
  Connect ID: people
  Connect password: people

  Data Mover:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  Application Designer:
  Type of database: Oracle
  User ID: SYSADM
  Password: SYSADM

  When connect Data Mover and application designer, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  According to my understanding, process connection Data Mover and the application designer requires 3 tables in SQL Server: PSOPRDEFN, PSACCESSPRFL, PSSTATUS. I'm not sure the process of connecting to the Oracle database. I checked the database PT853 instance in Linux, and there is only one table "PSDBOWNER" created by the scripts.

  My question is:

  Can any folk tell me the connection process Data Mover and Oracle database application designer? Requires only one table "PSDBOWNER"?

  Thank you.

  Oh my, many mistakes action here. If PSDBOWNER doesn't have a line, it must be solved at the time that the error came out. The replacement by SYSADM first why? Why is complaining already existing SYSADM? Most likely, you HAVE created manually, where you shouldn't.

  Again and again the same story. And again, sorry to say but you should take the basics of Linux training, Oracle training bases and sorry to be hard but reading training as well to read correctly the Peopletools Installation Guide where all required steps are really described in details.

  I don't think anyone can help you across the network in this respect,

  Nicolas.

• Cannot log on to the application designer using id PS while able to connect in data mover.

  Hello
  
  I install peopletool 8.50 (HRMS). I ran successfully all the sql scripts. Run the script DMS as well for the demo database.
  
  When I try to log in the designer of the application using PS/PS I get the following error...
  File: Error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 404 - ORA-01017: name of user and password invalid. connection refused
  
  while I am able to connect in data mover on Starter bracelet. Can someone help me pls?

  Using Oracle 11 g?

  This could be your problem, SEC_CASE_SENSITIVE_LOGON:
  http://bloggingaboutoracleapplications.org/PeopleTools-and-Oracle-11g-installation-issues/

• (createvw.dms) stuck for a long time while running data mover

  Hi all
  
  First of all, thank you to all our friends in what have been great in answering all of our questions and help us do our work effectively.
  
  My question:
  
  1. we had installed Peoplesoft HRMS successfully for purposes of demonstration, which works very well.
  2. we followed the same sequence of steps to install Peoplesoft FSCM 9.1 to another Windows 2003 server. We had followed the steps as stated in
  [http://milburytech.blogspot.in/]
  3. we have been checking the logs at regular intervals for errors and comparing with the log files, the HRMS Setup logs, but did not find significant errors.
  4 data mover has worked for more than 16 hours now and has been blocked to "view (s) remaining: 119 creation held AUC_SCR_CHT_VW.
  
  My query:
  
  1 can we kill the data mover and run it once more to continue on the display component to create?
  2. in case if she-error, can we continue without the view 119 remaining being created?
  3. it causes problems (in particular, access associated (as one of my other nationalities, said that they had faced the same question last month and they spontaneous able to connect to the application (as SYSADM) Designer after that they tried to ignore the creation of panoramas).)
  
  
  
  
  
  Kind regards
  Vikram

  Hello

  A stucks Data Mover on the aspect of creating strange view, but it could easily be killed without any problem. Just re - open DMS mode bootstrap and the missing steps:

  REPLACE_VIEW *;
  CREATE_TEMP_TABLE *;
  

  Nicolas.

  PS: SYSADM is a database user and has no right to connect to AppDesigner.

  Published by: Gasparotto N 2 February 2012 09:50

• Data move error

  Hello
  
  Installation of a peoplesoft HRMS 9.1 demo peopletools 8.51.
  
  Mover continues to stop at Spanish language install - restarted the script, but still put the question. Other languages have managed.
  
  
  On the road: Fri Jun 10 10:15:21 2011
  Release of Data Mover: 8.51
  Database: HRMS (ENG)
  Error: Error execute SQL to DROP TABLE GPIT_FPCCOD_LNG
  Input file: F:\PT851\data\hcespa.db (ENG)
  Search current GPIT_FPCCOD_LNG... Please wait
  Found GPIT_FPCCOD_LNG
  Import GPIT_FPCCOD_LNG
  Import GPIT_FPCCOD_LNG 0
  File: Data error MoverSQL. Stmt #: Position error 0: Return 0: 1001 - ORA-01001: invalid cursor ORA-06512: at "SYS." DBMS_STATS", line 13056 ORA-06512: at"SYS." DBMS_STATS", line 13076 ORA-06512: at line 1
  Failed SQL stmt:RECSTATS PS_GPIT_FPCCOD_LNG BASS
  Error: Execute SQL error for %UpdateStats(PS_GPIT_FPCCOD_LNG)
  Error: Name of folder to import GPIT_FPCCOD_LNG
  End: Fri Jun 10 10:15:48 2011
  Unsuccessful end
  
  How I have difficulty or change the SQL to work around this problem? Base language is English. System is running on Oracle 10 g-windows 2003
  
  Thanks for your help

  Yes.

  Nicolas.

• One diskgroup to another data movement

  DB version: 10 gr 2, 11 2 GR
  operating system: Solaris
  2 node RAC
  
  
  Someone here had to move data from one diskgroup to another?
  If you did, why it was done and how did you do?

  J.Kiechle wrote:
  DB version: 10 gr 2, 11 2 GR
  operating system: Solaris
  2 node RAC

  Someone here had to move data from one diskgroup to another?
  If you did, why it was done and how did you do?

  Explain the problem and therefore move the data.

  As for 'move' data at the level of the DSO, while the CAR is running and don't even know... Here are the basic steps:
  (a) you add the new disks (which will be the 'new' diskgroup) to the existing diskgroup
  (b) you drop all 'old' disks in the existing diskgroup
  (c) you start a consolidation process (this will be rewinding the data from 'old' disks on the 'new' records)
  (d) once consolidation is completed, the "old" records will be removed the existing diskgroup

  Thus the name of diskgrpoup remains the same - but the diskgroup is composed of a whole new set of disks. The 'old' discs are now unused and can be used to create a new another diskgroup.

• VP1 can not connect in data mover

  Hello
  in tools 8.50 on Win 2003, Oracle 10g DB.
  VP1 can not connect. Syadm can connect to Data Mover.
  People can connect via sqlplus.
  
  any idea?
  It must be a problem of role.
  Thank you.

  What kind of application? VP1 is FSCM, CRM and ELM, PS for HCM, PTDEMO for the database of the system Peopletools.
  What is the error message also?

  Nicolas.

• p6157c NVIDIA 9100 problem watching a movies / games

  Problem viewing / games, graphics distorted / audio unsynchronized (especially when video / game is the size of the screen)

  I downloaded the latest drivers and still have problems to display movies and games. I have Windows 7 Professional 64 bit.

  Help, please

  It seems the download worked from the fix.

  Recently, however, I noticed that the problems with the display of movies / games corresponds directly with the heat of my processor. I have new intend grease the processor / module to allow diffuse heat better and maybe get a better cooler fan. Apparently, the processor idle in order to avoid overheating, causing my video to deform.

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Netflix in WMC «there was a problem of data recovery...» »

  I installed the latest round of updates (Ultimate) of Windows Vista and it apparently burst Netflix in WMC.  Now, I get the error:

  "There was a problem of data recovery. Make sure your internet connection is working and try again. »

  Internet works on the machine.  I reinstalled Silverlight (v4) and Netflix for WIndows Media Center.

  How to diagnose and repair the problem?

  Thank you!

  Keith...

  Sorry for the delay, but I've been busy (in my free time) trying to get this to work.

  I gave up trying to resuscitate MCE and installed a brand new Windows Vista Ultimate Edition with Service Pack 2.  After apply all WIndows patches and installation of Silverlight, I have the "Netflix" element in MCE.  He invites me to install, what I'm doing.  However, every time I start MCE and go to Netflix, he tells me to do reinstall - no login screen.

  I tried all the "mcupdate" article and then supported your steps above, but no go.

  I did this twice, so it wasn't just a fluke.  Apparently, the part of Netflix to MCE is not detect the plug-in that it installed.

  Any thoughts on what to do then?

  Thank you again...

  Keith...

  Later: I ran "mcupdate" after the steps you suggested, and now Netflix is gone again!

  Later: same problem on my other computer running MCE and Vista.  I don't want to mess up this computer so I left as what.

  Later: opening of a new post on problems become Netflix to work with a clean install.