Play65 doesn't ' work why?

Similar Questions

• Why transfer doesn't work?

  Hey, guys! Hoping someone here can help me. I am the proud owner of a Macbook (early 2015) of the retina, and I love it. I want to say that it was no problem, but I Can not - transfer does not work!

  I logged in iCloud by using the same Apple ID on my iPhone (iPhone 6 s, iOS 9.3.3) and when I log in Messages on my Mac, I keep seeing in the left panel under 'Preferences' that my account is inactive. Whenever I try to send a message to someone, the name comes in red and I'm invited to sign it - except when I hit the sign in button, I'm actually still signed in and the account is activated! I take a glance settings iMessage on my iPhone and noticed that there is no option for transmission of Message text, so it was not possible to activate this feature.

  I called Apple Support and they also found it strange that he did not work, they find more strange was that "I had all the ingredients, but it does not work" - which means, I am connected with the same ID, my number appears in the preferences of Message on my Mac, I signed with my identifier Apple to use iMessage on my iPhone... it's weird. The next day, I noticed that some aspects of the transfer procedure worked.

  Every time I open Safari on my iPhone, it appears in the Dock on my Mac and vice versa. It goes the same for mail. I also noticed under "phone settings" on my iPhone, I had the opportunity to receive calls on my devices to iCloud, which listed my Macbook. I thought: 'very well! an improvement! "Later, I invited to enter a PIN code of my Mac on my iPhone and voila! Transfer text messages was there, I entered the code and then prayed. Back to the start box, Messages on my Mac refused to work. I kept getting the same problem as above. I must point out that Safari, Mail and phone were still working through transfer.

  Today, I noticed nothing work - no mail, no phone and no Safari by transfer. The option to respond to calls on other iCloud devices have also disappeared.

  When I contacted Apple, I was put with a counselor... but I have not heard yet return. He was also puzzled over there (but very useful). The impression I get from Apple, this is a problem at the level of the device. I'm not so convinced, I'm thinking it was to do with my account on the end of Apple (perhaps the Server/service level?). To my knowledge, Apple Support and specialist have not looked into this.

  Here is what I tried:

  1. Turning iMessage/Facetime on my iPhone on and outside.
  2. Signature on my Apple ID for iMessage and Facetime and then signing back in.
  3. Disconnection and signature in Messages and Facetime on my mac.
  4. Signing in and out of the iCloud on my iPhone and Mac.
  5. Restart both devices when they are disconnected from the internet.
  6. Tried the signature using the App password. (did not work)
  7. Off the two-step verification. (that is, one more time)
  8. Signature on all of my Apple ID account by using only my email domain iCloud.
  9. IPhone restored like new.
  10. Recovery of the Internet on Macbook.
  11. Checked my iPhone automatically sets the time zone.
  12. To ensure that the region iMessage/Facetime and iPhone/Mac were the same (United States)
      1. I must emphasize that the region of my ID Apple is set to Barbados (where I'm from) so that I can use my local iTunes/App Store purchases credit card but I don't see how or even why it would affect the transfer procedure
  13. At the request of the Senior Adviser, I called my provider wireless (flow Barbados) to understand if they support the text Message Forwarding (they didn't know what I was talking about, first, that they said no encryption, it wasn't like call forwarding, and then when I explained to them, they said they were not sure and contact Apple even once).
  14. I don't know if this has nothing to do with it, but I find my iPhone refuses to connect to my MacBook via bluetooth after mating, my MacBook would say connected and my iPhone say not connected, and finally he would be dismissed. But sometimes it does not work when I use the Handoff... weird apps. Also, I can't seem to get AirDrop works, does not detect my devices between them. Just said that I would mention this in case it helps.

  Honestly, this has me has raged for a few days now and I'm really at a loss as to what I should do.

  Any ideas or suggestions? Whatever that either would be appreciated.

  UPDATE: transfer of telephone, Mail and Safari doesn't work again... still no luck with Messages.

  I have a few updates with screenshots, hope they help.

  So, I get this message when I connect using the same Apple ID on iMessage on my iPhone and iCloud/Messages on my Mac.

  

  When I signed, what happened. I was able to sign properly.

  

  As you can see here, my ID Apple is connected and my number is recognized. Note, it continues to tell me that iMessage inactive (red underlined).

  

  When I try to send a message to myself (even with other known users iMessage), this is what is happening.

  

  For some reason, the recipient turns into this red box, where is my Apple ID is the box and I am being asked to activate my account of iMessage. When I click the activate option, I see that I am connected and the ID is activated.

  This continues to baffle me.

• Why ctrl + shift + t doesn't work anymore?

  Why ctrl + shift + t doesn't work anymore?

  The problem is solved in the next Firefox 26.0 and not 25.0/25.0.1

  For playback as Bugzilla is not a discussion forum.

  Bug 858975 - Shortcut key for Inspector is conflicting with shortcut key for undo close tab
  

• Why my home button doesn't work sometimes?

  Why my home button doesn't work sometimes? I have to click several times to activate it. I have an ipad 1 month 12.9 pro. Very frustrating. Thanks for any help.

  You can use a virtual Home button. To enable it, go to settings > general > accessibility and scroll down until you see AssistiveTouch *. You want that lights up.

• Why the rejection of multiple photos doesn't work anymore when you change pictures?

  Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!

  Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.

  Have you tested, if the problem occurs only in an Aperture library or libraries opening?

  Create a new Aperture library to test and see rejection, so it works.

  If it does not work in a new library either, I got trash Aperture preferences.

  In preferences file is now in the container folder in the user's library.

  Try this:

  • Leave the opening runs.
  • Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
  • and the ~/Library/Preferences/com.apple.Aperture.plist file

  Your user library can still be hidden. To reveal the hidden user library:

  • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
  • Select your folder user/home (with the House icon in the side bar of the Finder)
  • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
  • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
  • Open your folder, then the library folder, then the containers.
  • Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
  • Delete ~/Library/Preferences/com.apple.Aperture.plist as well.

  Now, restart the Mac, start Aperture and try see your book.  If all goes well, delete the folder on the desktop.

  Re: Viewer has been reduced mode Photobook

• ATH.exe doesn't work anymore, why?

  ATH.exe doesn't work anymore, why?

  Hello

  ATH.exe is a device Apple driver, so you must check with Apple Support
  for the device you are using. As an iPad, iPod or whatever. Also ask
  in their forums.

  Apple - Support
  http://www.Apple.com/support/

  Apple - Support - Apple Support Contact
  http://www.Apple.com/support/contact/

  Apple - Support Community - Forums
  https://discussions.Apple.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Lightroom: Why edit in External Editor who worked doesn't work now?

  Lightroom: Why edit in External Editor who worked doesn't work now?

  In what sense do editing in the external editor not working? What happens when you try?

  Which editor are you trying to reach?

  People will not be able to help you unless you have a good idea of what is happening.

  HAL

• Why my Healing Brush tool doesn't work anymore?

  Why my Healing Brush tool doesn't work anymore?

  Try to reset the tool

  Control-click the icon for the tool in the options bar

  Check the screenshot for reference below

  

  Thank you

• HP 14-r206nv: light wireless led doesn't work do not

  I have a very minor issue that don't mind operating of the laptop, but I'm curious to know why it does not work, because I know that before reinstalling windows it worked normally.

  Well well, to the point now. After a hard drive failure and replacement, Windows 8.1 are installed again and each driver has been installed and works well. The only thing that doesn't work is the led light button wireless (F12). The button is working correctly, activation and deactivation of the Wi - fi, but not the led. It lights, neither white nor red, it is always disabled.

  The model of the wireless card is Realtek RTL8723BE.

  I installed the drivers from the HP site.

  Version of the driver for the wireless card is 2013.8.915.2014

  The version of the wireless button driver is 1.1.7.1

  I tried the latest drivers for the card (an optional windows updates finds) implemented to date for this and the wireless button (if I try update driver in Device Manager, it installs a new) but nothing has changed for good so I decided to go back to what the official site suggests and post here.

  Hi @v1184,

  Thank you for your inquiry.

  I understand that you had a hard drive failure and he had to be replaced, you did. You reinstalled Windows 8.1 and all drivers are up to date.  The only problem you are having is that the wireless button light does not illuminate, but it does not work.

  You tried to update the wireless driver button, but has not changed, so you returned back to the recommended HP driver.  As the wireless button does not work it is not the driver, however, it could be that the light burned. The other possibility would be that when you replaced the hard drive, the connection has been dislodged or disconnected and must be reconnected.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on ' Thumbs Up ' below is a great way to say thank you!

• Qosmio F30 doesn't work anymore - white screen

  Good evening.

  I seriously need help with a problem with my qosmio F30.
  For some unforeseen reason, he decided to stop working and I am struggling to think of any reason why.

  He is able to enter the laptop itself and when you press the power button the surrounding blue light also, however, that's all, that's all that happens. The cooling fan comes after 30 seconds as planned, but the lights on the front do not indicate the hard drive, kicking in, or actually the any lights on the front, other than the power.

  All I get is a blank black screen. I use my neighbors pc right now which is annoying and I could seriously do with a Board of experts on ho to fix this problem because it is now out of its warranty

  Kind regards

  Hello!

  Just a simple question: you see an image on the monitor of extenral? I ask this question because theoretically the internal monitor may be defective.

  If the outside monitor doesn t work too I think that it s that a hardware malfunction and you should go to an authorized service provider. Technicians can check the laptop's motherboard or the CPU may be defective.
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye

• used ACER Aspire 5100 which has windows vista Home premium with service pack 2. It has technology MOBILE AMD Turion 64 x 2 usb ports doesn't work don't, webcam and CD/DVD drive now does not.

  I bought the laptop to a pawn shop and waiting for a few minor problems, but not this one.

  It began with the webcam doesn't work does not correctly, but works. After Device Manager running that it has detected a Xerox Pro scanner, not built in webcam which i see in front of me. I tried everything with no success, but this isn't the only problem there is... more

  After I realized that the cam is not working, all 3 USB ports leaving recognize anything and all the devices connected by a mouse flexible wireless microphone on a memory stick 4 GB, could not be recognized. All were then tested in two other PC with these things being recognized and installed on the PC.

  I have updated after him saying driver not installed, only to be told driver is already up-to-date, but will still not be recognized.

  Now the CD/DVD does not work and is not even detected in scan. says the drivers are not present or that is disconnected. I did nothing else than to go in circles are doing the same thing over and over again.

  Is there a worm or bug or something wrong freeking I know and how do I solve this problem?

  I like most of the features of vista, but if it's the doo doo a bit I have to put up with... I want XP less back pain...

  Once again can not locate or install programs or drivers to operate the integrated webcam

  All USB ports defective 3 and CD/DVD is no longer functional or even detected in laptop... HELP ME PLEASE

  Hi Laurent,.

  1. did uninstall you the USB ports on the Device Manager and reinstalled as mentioned in the previous post?

  Please see the following thread link:

  my USB say this device not yet recognized the worsks device in the other laptop why?

  Uninstall all USB device manager entries and check.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  2. have you tried to uninstall the webcam?

  If this is not the case, try to uninstall the webcam in Device Manager and install the latest version of the drivers from the following Acer site.

  Acer Driver Downloads

  On the problem of DVD player, you can try the steps in the following article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope this information is useful.

• Aero peek doesn't work do not

  Aero peek doesn't work! When I put my mouse on the taskbar at the bottom of my computer, it shows just the words and not the smaller window icon. When I go to the properties of the taskbar, it is gray and I can't enable or disable it. I read some of the other issues people here and I didn't know that Office 2007 can be part of the problem. I have Office 2010 could this be the problem? This air look was one of the features that Windows boasted of and now it does not work? I'm not happy about it and nobody seems to have a solution for it! Why not??? I want answers please.

  You must have the Aero Glass theme enabled to use Aero Peek. Right-click on your desktop, click Customize > select Windows Aero under Aero themes.

  Please see the following thread for additional solutions:

  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/39108d91-B455-472c-B144-3e9138e196a7

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Dreamweaver CS4 doesn't work anymore?

  I have Dreamweaver CS4. I used it for a long time in my old computer without any problem.

  Yesterday I installed it in a new computer with Windows 10. But he said: "this serial number is no longer you will allow to use this product.

  ????????????????????????????

  What is c?

  I have the original DVD. Until a few weeks ago, I have used in my business. Why doesn't work anymore?

  You can try the solutions in the following docs based on your operating system?

  Error: "License has stopped working". Mac OS

  Error: "License has stopped working". Windows

  I move your post to a more appropriate forum for the experts here to help you.

• Downloaded cloud of CS of the trial, the trial has expired but did not continue, the time to be happy with CS5.5. Now my Acrobat doesn't work, decided to reload all the software, while downloading, an error appears: exit all applications: SafariCloudHisto

  Downloaded cloud of CS of the trial, the trial has expired but did not continue, the time to be happy with CS5.5. Now my Acrobat doesn't work, decided to reload all the software, while downloading, an error appears: exit all applications: SafariCloudHisto, why can I not proceed with the download, quit all programs that are restarted, everything always the same message. Any thoughts there?

  See the link below:

  https://helpx.Adobe.com/Acrobat/KB/install-prompt-close-safarinotificati.html

• Interpolation: copy / paste doesn't work is not on a particular Tween properties

  Hello

  I do very simple tweens with 'new' (non-conventional) method.

  I want the object to move only after a while so I'll try to reproduce the starting position to a keyframe later but, for some reason, it doesn't work on my project while working on a test file.

  I have copy and paste properties of the first image to another key image, but it is not applied at all.

  1 = the starting position

  2 = keyframe with properties stuck but the position is still the same (between 1 and 3)

  3 = end position

  Any reason why it wouldn't work. Thank you.

  Solved!

  I added some ease before trying to move keyframes and this is why it does not work.

  Thanks for your tip Kglad!