Problem of destination

Similar Questions

• H8 - 1237c try to use recovery disks that comes in can I format drive c

  I just got in my HP recovery disks. My problem is when I start it, it tells me that the hard drive is not the same as the original. But the problem is destined, I had the hard drive of the diving and it won't let me continue with the recovery. I want to format the C drive everything and reinstall the system disks supplied in ideas that it is their a way to do this through the command prompt?

  Thanks for your help

  [Personal information]

  Hello! This could give a try.

  Dokie!

  http://how-to-erase-hard-drive.com/

• Long numbering on UC540

  Hello

  Here I meet a problem a little solo on a UC540, when the boyfriend he has elapsed while 12 to 15 seconds before the first ring. My outgoing dial plan is correct, the 0 is defined pour out via the SIP then Kylian Standard than 9 out only on the Standard, after comparison it turns the output via the standard is 3 times faster than the output via the SIP. I so contact my provider SIP (OpenIP) pour check with them setting up if everything was OK and d ' after them no, so I turn to you pour whether he didn't no of staff of the United Nations list somewhere in the UC540 that would manage this function of time.»

  PS: even with a # at the end the numbering this does not change the time.

  Thank you

  Hello

  I do not know the OpenIP configs but your concern reflects a problem of destination-model.

  By default, you have this:

  Dial-peer voice voip 1002

  corlist outgoing connexianslst

  Description * outgoing g729 *.

  translation-profile outgoing xxxxxxx_out

  destination-model 0 t

  codec voice-class 2

  session protocol sipv2

  session target sip-Server

  DTMF-relay rtp - nte

  No vad

  This model destination with the T to fin attends a time-out for send the dialed digits.

  So do not wait for the timeout, created a new dial-peer with United Nations translation model that corresponds to 'faster' the 10 entered digits:

  destination-style 0...

  Hervé

• Error VDR 2246

  Hello everyone

  I have an error when I want to create a backup

  error: cannot access destination/SCSI-0: 1 /, error-2246 (destination index not found)

  I searched and found this questions:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1015901

  http://communities.VMware.com/thread/230153?start=0 & tstart = 0

  -Solitare certified Expert: data recovery error Vmware-2241 (index of Destination invalid/damaged)

  but these solutions could not help me,

  When I run and integrity checking, I have this report:

  16/06/2013 17:45:16: from integrity check

  16/06/2013 17:45:16: destination/SCSI-0: 1...

  16/06/2013 17:46:22: from complete integrity check

  16/06/2013 17:47:04: problem reading destination, error-2241 (index of Destination invalid/damaged)

  16/06/2013 17:47:04: destination "/ SCSI-0:1 /" will be locked until the integrity check successful.

  16/06/2013-5:47:04 PM: 1 task errors

  16/06/2013 17:47:04: duration: 00:01:48

  can anyone help?

  AakashJ : Sorry I deleted the logs and I don't have them now

  Finally I deleted the backups and the second VHD (backup destination) and once again added a new hard drive, editing it and format, then everything is ok, and backup and restore works now

• InDesign CS4 bookmarks can cause the same name?

  Hello

  I am a new user of Indesign CS4 and have recently created a 388 pages in PDF with bookmarks entered using the bookmarks of Indesign Panel.  However, in the PDF, I find that if a bookmark in a chapter has the same name as one bookmark in another chapter, then clicking on the first bookmark takes you to the page indicated the second - as if somehow to create the second bookmark has "substituted" the page of the first reference.

  I me assuming that bookmarks have their own unique ID and what to say, with a bookmark called "Economic factors" in Chapter 1, and a bookmark bearing the same name in Chapter 2, would agree.  However, in the PDF I created from Indesign, this isn't the case.

  Please can someone advise?  I'm doing something wrong?

  Best regards

  Sarah

  I played and I'm able to reproduce your results in certain circumstances. I think it is a bug, and it's there in CS5, too.

  I also found a workaround, but there will be a LOT of work in a doc where you already have created bookmarks. As I said, this happens in certain circumstances in my tests, especially when you highlight the text and create the new bookmark and accept the name of the bookmark in the highlighted text. Even change the name of the selected text does not appear to make a difference, at the time of creation or thereafter. On the other hand, so simply, you place the cursor to the location of the text and make a new bookmark, the default name will bookmark N (N is a sequence number) and you can change it to what you want.

  I made two sets of bookmarks nested covering different pages and names them ALL identically. They all work correctly, if my guess is that the bookmark resumes the name of highlighted text, but a number of generic sequence of a plain insertion point and everything is picked up sticks. If you take the same name you no longer have an identifier unique, and that leads to the same problem of destination, but I want to emphasize this is just a guess.

  So that this works, you must recreate the bookmark. You cannot rename.

  I filed a bug on this.

• Problem with my file in the SupportVIs directory found deployment package and not the Destination directory specified

  I have a little problem with a package of teststand.  I wrote a few screws to provide a wrapper around a custom DLL to provide the error handling. These screws use the following call library functions as indicated below.

  

  After installing my application, some of my screws are my DLL custom in the correct destination directory and other parts that are in the Directory Support screw which creates the deployment. The problem is that the DLL must be installed in a specific directory, because it uses the other files that are in this place-related directories.

  Currently I work around this problem by running the installer, and then manually delete the DLL to the folder of the SupportVIs dirctory.

  Does anyone have any suggestions on how to fix this?.

  

  

  Hey,.

  So, what seems to happen, is that your VI sees that DLL as a dependency and wants to keep with her VI.  I can't find a way to the deployment tool to do what you ask, however, here are two ideas that could solve your problem in other words.

  Do you need to have your DLL in the precise place?  If this is not the case, why not in your VI on your call library function, check specify a path on the chart.  Then, on your diagram, you generate a path relative to the location of the VI.  In this way, it's okay if your DLL is located in the support of screw

  Another idea would be after that installation is created, you can create a batch file that runs the installation and then automatically delete the DLL support VI place.

• Problem of 'send file' destination Scan C5180

  I don't know if this is the right forum, but I 'he's beginning here and someone can tell me if another court is more appropriate.

  Background:  I have a laptop company I use to work from home.   I don't have administrative privileges on the laptop, so I can't install the center of HP solutions on it (I don't think).   I have my C5180 directly plugged into the laptop, and I can print correctly.

  Problem:  Because I have no HP Solution Center on my laptop, to launch a scan, I have to start it from the device itself.  But only the display options are: Scan and reprint and scan to memory card

  What I've tried so far:

  • I have connected the device to my PC and went to scan for... Installation program.
  • I added 'send file' to the Destinations of front panel and 'send file' now appear on the Panel.
  • I turned on the connection to my laptop and tried to scan with this destination.
    • Error message: No network connection, refer to the documentation of network
  • I cancelled and now the front panel Destination no longer display 'send file' option, even when I plug it in my PC.

  My Questions:

  1. If it is directly connected to my laptop, why it cannot scan a file?
  2. Why won't the front panel additional Destinations?
  3. How can I make this work so that I can scan to a file on my laptop, without having to install the HP Solution Center (which I believe requires administrator privileges)

  Hi Loretta,.

  Destination analysis lists come from the computer, it is connected in real time. None of the destinations is stored on the printer. and the solution Center sends the scan destination list to the printer. So it switching from the PC to the laptop will not give you these options.

  To scan, however, go to control panel and open Scanners and cameras. This should generally have a scanner for your printer icon. If you double-click it, it will open a wizard, that helps, you can scan your PC.

  Go back for clarification.

• Problem too Long way destination - Item not found to rename folders

  I searched an answer in the world to this question and it seems that none of the '' correction '' that people have had success with worked for me, so I write my own question in the hope that someone can help me, and in turn anyone who stumbles on this problem will find this thread and be helped as well.

  My OS is Windows 7 Home Premium SP1

  Here's the problem:
  For a few months now, I was not able to make a new folder and rename it with windows Explorer (I have to go to the command prompt and do it this way)
  It gave me errors "Destination path too Long", despite the path doesn't exceed NOT the limit of 260 characters. Even if I rename the folder '1' or 'a' it gives the error. I have files that were created before the problem that are fine, but they can't really be renamed with windows Explorer.

  It also gives me the 'path of destination too long' error when you move files in other folders, thus making the Organization of difficult cases.

  I tried to uninstall the update "kb980408" as other threads have said... and it did nothing for me. I tried to delete the reg files as indicated on multiple threads to try to solve the problem that some people had success with... I have not the case.

  I ran chkdsk, several malware scans and viruses which did nothing.

  I had not initially installed SP1, so I tried to see if it changed anything. He did. Instead of the "destination path too long" error, I then go "object not found" when you try to rename a file or move a folder to another folder. If I hit "try again" on this box, then it would actually rename the folder or move the folder successfully. Well, not being able to live with the stupid error that appears when I want to simply create and rename a folder, I searched for a way to get rid of THIS problem that brought me to remove these registry keys once more. After reboot, back to the error "destination path too long" and not rename/move the files once more.

  Anyone had any experience with this problem and you can guide me in a solution that does not involve a clean install?

  Hello

  Read the following article, it helped me to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/destination-path-too-long/7ff8d0d0-84F3-4d13-B2FD-f742a38731c5

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/c6bf8dad-eb04-4818-Ab19-6c46854dd146

  http://www.bryantwebconsulting.com/blog/index.cfm/2012/1/19/getting-around-Windows-7-destination-path-too-long-error-when-deleting-files

  http://forums.techguy.org/Windows-7/911476-solved-destination-path-too-long.html

  Make sure you try all the steps.

• External device problem - "YOU NEED of PERMISSION to PERFORM THIS ADMINISTRATIVE TASK" & after I click 'YES' it says "DESTINATION FOLDER ACCESS IS DENIED."

  Original title: external device problem

  Whenever I connect any external devices like pen drive & sdcard, I can't write anything in them, that they are not protected in writing! But I can copy things from them, but I can not cut & paste anything on their part in my system. I can only copy & paste. Whenever I try to write anything he says 'YOU NEED of PERMISSION to PERFORM THIS ADMINISTRATIVE TASK' & after I click 'YES' it says "DESTINATION FOLDER ACCESS IS DENIED." When I tried to format these devices, he says "YOU do not HAVE ENOUGH PERMISSION to PERFORM THIS OPERATION".

  Please help me!

  Sriram salvation,

  Have you tried the suggestions in the previous answer?

  I suggest you to disable the antivirus application and check the status of the issue. Refer to the following steps:

  a: you should see an icon for your Antivirus program in the taskbar notification area. It is usually at the bottom right of your desktop.

  b. click the third-party security software, you will see a pop up.

  (c) in this pop and select the option to disable, click on it.

  d. now third-party security software will be disabled.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please let us know if you need assistance.

• There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  This means that the folder you want to create is blocked because of file permissions. The drive or folder you are trying to create the destination folder is set to read-only, and your username does not have write permissions.

• Problem creating the destination for Lightroom 6 folder

  Just upgraded to Lightroon 6. Now I have a problem creating the destination folder. Already checked the folder permissions. Even tried a new folder nothing helps. A lot of space on the computer.

  Don't know who to turn to next. Is this a problem of individual computer?

  You must use a computer with permissions of administrator account

  Also, do a right click on the installer and select RUN AS ADMINISTRATOR from the popup option window to see if that helps

• Installation of the Photoshot 13 elements. error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I have 1.38 TB of free space and total control

  I try to install photoshop elements 13, that I bought and downloaded from Amazon. When I try to install it I get the following error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder. I administrar 1.38 TB of free space and total control.

  Charles please do not remove the installation files in the Program Files directory.  I recommend to extract the installation to your downloads folder or your desktop files.  Once installation files are extracted, you can then run the installation program to install Photoshop elements 13.

• Problem with function Set Destination

  I am adding bookmarks to subheadings in a pdf document in Adobe Pro XI and am having a problem with the function of the Destination defined in a specific case. I am attaching a video that shows the issue clearly, but I'll explain below as well in case some people have difficulties to display the video.

  I understand how to create a bookmark for a subtitle, and I understand how to use Set Destination to ensure that, when the user clicks on the bookmark in the Panel, the subtitle is displayed at the top of the screen.

  However, I ran into a problem. Some of my subtitles are run subtitles, which means that subtitles are part of the first line of the paragraph (this is common in the APA and some other editorial styles). When the running subtitle begins the last paragraph of a page and is towards the bottom of the page, the function of the Destination value does not work. Specifically, when I set the destination of such a chapter, when the user clicks on the bookmark in the Panel, it sends the user to the page after the bookmark. Is the closest I can come to get the subtitles to appear at the top of the page to set the location to the previous sentence, but this is obviously inaccurate. I work in professional contexts in which the bookmark should appear at the top or the documents of my clients will sometimes not be accepted for publication.

  Does anyone have an idea how to get these subtitles appear on the first line at the top of the page?

  Don't forget to turn off the continuous vision before you set bookmarks. Acrobat makes no sense "line active" for a link and links to the number of current page shown in the toolbar.

• Problem change an internal hyperlink to the new destination

  I work with a document (77 pages) created originally to InDesign CS5.5 on a Mac.  I'm now working with her on InDesign CS6 on a Mac OS 10.7.4.

  I need to update the destination of many of the existing hypertext links in the summary document title.

  One of the problems is that the hyperlinks does not show that the document contains all the hyperlinks existing in the links Panel, which is strange.  When I export the document as an interactive PDF, the table of contents is linked to internal pages.

  Here are the steps I took:

  • I pointed out the existing text (hyperlink) in the title of the summary document
  • Choose new hyperlink Destination-> Type-> Page.
  • Select the Page #.
  • Sets the zoom value.
  • Save the document.
  • Export interactive PDF.

  The link does not update to the new page # I selected.

  I don't have the ability to create a new hyperlink, since it is grayed out.

  I exported as an IDML and repeated all the steps.  No difference.

  Any ideas what I am doing wrong?

  Kathryn

  If you create a Table of contents using the table of contents function, this operation automatically creates a hyperlink and the destination is defined when the table of contents. These hyperlinks do not show in the hyperlinks Panel, like the links created manually. You will not be able to reallocate the destination in Indesign. The TOC links are visible in Acrobat by selecting the Connector tool, and then modify the destination, but not recommended for the many changes of destination. Where the content has been moved to different pages ID and manual changes to the table of contents, the destinations of these hyperlinks are probably not correct. You can delete all the external hyperlinks and regenerate a table of contents with the new link and created destinations and see if that fixes the problem.

• Problem Setup message destinations

  Hi people,
  
  I just started to play with the flex data services a bit and tried the sample chat application that Aug can be found on the Labs site - it is called "Simple Application of cat. However, I came across a comment on the problem quickly covers the configuration of the channels and the dewstinations in the services.xml file - xx. It doesn't seem to work, the runtime compiler always sheet ma, that the destination does not exist, in fact he did, and Yes, it's the right configuration file...
  
  So, alone with my pain, I decided to rework everywhere, uninstalled everything and started from scratch. This time I choose install the SDS as a JRun server instance, since I use an instance of j2ee coldfusion on the same machine. Now, I don't get the compile error more, and the app shows me how the message format ist, he is about to send. However, the message is not on a second instance of the same application.
  
  Even more worryingly what do I need to package flex-admin? It doesn't seem to be able to configure anything, it? It is for monitoring only? Could not find any documentation on this subject, unfortunately. However, since the installation of the scale, the flash-flex-admin UI displays all the data. in the facility before, he did at least...
  
  Help, anyone?
  

  Thanks for the tip, I'll try that soon.

  but in the mrantine I realized what the real problem was...
  I used the jrun installation that comes with the coldfusion installation package. When finally, I rode the flex-error log files, I discovered, that the messagebroker servlet could not be instantiated due to an older version of jre (who came with cf!). However, I installed the latest version and since - everything works as expected :)

  Thanks again,
  Thomas