Portege R500 - Slim port Replicator II: dual monitor DVI & RGB all

Similar Questions

• Portege R500: Slim Port Replicator II - headphones not working not

  Hello

  I have gor Portege R500 with Vista preinstalled Enterprise.
  It's maybe just me in dense (!) but I can't get the headphone jack to work when it is in the Replicator (and the Replicator does not have such a plug).
  The headphone jack works well when it is off the Replicator and the speakers connected it work very well also...

  I have played with the settings in vista and still can't make it work - any ideas?

  m

  Hello

  You must first check the Toshiba drivers for the last sounddrivers download page. Download and check if the problem occurs again. If not, everything is OK, but if not then come back and we'll talk more about your problem.

  Welcome them

• Portege R500 - Slim port replicator monitor external activation question

  Hello
  I use a Toshiba Portege R500i and a thin replicator II

  I have the extensions mobile tosh running and set to activate the external monitor only on the dock. This works very well if the machine is open and connected, BUT if the machine is closed and will then sleep, I dock, turn it on, the mouse and the keyboard light upwards and the screen does not turn on. If blindly, I type my password, the screen is activated. Also, if I opened the laptop and log in to the external display is enabled.

  How can I get the screen to activate without logging in?

  your
  Bob

  Hmm.
  I think first of all you must update the Mobile Extension of TOSHIBA.
  Then, you must make sure that in the "TOSHIBA Mobile Extension" "Service of change of display" is checked and the release of 'the view' has the value 'Different internal/external of the Image' in the tab 'change of display Service.

  In addition the display driver update.

  I'm not very well if it will be a solution but it s m without a doubt worth a try!

• Portege A600-133 - Slim Port Replicator III does not entirely

  Hello...

  I just got a Slim Port Replicator III (model PA3681E-2PRP) and annexed a number of devices (a VGA monitor, a USB keyboard and a USB mouse), according to the user manual.

  The unit, however, does well with my laptop (a Portege A600-133). Specifically, the laptop battery does not, the devices are not recognized and docking led remains off. However, the laptop turns on and off of the port replicator power switch, and the ethernet port also works very well.

  Clues?

  Thank you!

  Dimitris

  Hello
  I also had problems with the Portege A600 and Slim Port Replikator, when I just connect, works all good! Maybe it's too you, when you try to connect to the port Slim R. you: with your hands the laptop with Slim Port R. extra press together in the Air about where the connector is, one when she makes "Clack" and then a right is connected!
  Sorry for my English

• Portege R600 cannot detect Toshiba Slim Port Replicator II PA3603U-1PRP

  Hi all

  My Toshiba laptop is Toshiba Portege R600 D260 with Toshiba PA3603U - 1PRP Slim Port Replicator II (REF: PA3603U-1PRP), the problem is "PA3603U-1PRP Toshiba Slim Port Replicator II can't detect the USB Port.

  I wonder that PA3603U-1PRP Toshiba Slim Port Replicator II is not suitable for Toshiba Portege R600 - D260.
  Please help me,
  My Skype: hau.vancong

  According to the specification of the laptop, with this notebook, you must use Toshiba Replicator Slim of ports with PA3681E-1PRP part number III.

• Portege R700: Speed Port Replicator HI + USB Vista questions

  Good afternoon

  I am having trouble with 4-5 new R500-1hd (311th short number), the number could be higher, but users could not have reported it.
  If the laptop is disconnected from the HI Speed Port Replicator 2, it off very well and the laptop can be used, but when the laptop is brought back it does not recognize the mouse or the keyboard. The device does not appear as an "unknown device" in Device Manager, but just does not at all appear.

  A new problem that has arisen is again when the machine is off station USB devices install\work not unless they are connected on port SATA\USB, once again the machine failed to detect at all. Even when devices are picked up, it may take in any case of 30-60 seconds before the work of the mouse and the keyboard.

  These are corporate images deployed through WDS and the problem is very intermittent.
  A reset is applied each time the device will be detected.

  I had a couple of flying machines and finished the stretch prior to the computer with Windows 7, computer image portable devices all work fine with or without the docking station and can be used instantly.

  Isn't anyone has an idea how I can fix this problem?

  Concerning

  Kris

  Hello

  As far as I know speed Port Replicator HI new supports the USB 3.0 standard.
  I found the USB driver on the European driver Toshiba for the USB 3.0 feature page.

  I recommend that you install this!

  Thanks for posting comments after trying that

• Portege R500 - no image on the external monitor

  Hello everyone

  There is no image on the external monitor on my Portege R500 with Win XP SP3.
  The screen seems to receive the signal, but the screen remains black.

  Anyone know a solution for this problem?
  Sorry for my bad English.

  Thank you.
  Daniel

  Hello

  How have you tried to exit from display on an external monitor?
  Usually, you use the FN + F5 key combination.
  This allows you to switch between the two screens; laptop + external display.

  I had a problem to view a video on the external monitor because the video is already running. You must switch to the external display until you start the movie, etc.

• Tecra A9 and express port replicator - two external monitors

  Hello

  I have a Toshiba Tecra A9 laptop and a Toshiba express port replicator, the Replicator has two outputs DVI & VGA, but I just can't seam to allow them both to use my funds rather than 1 desktop computer screens and the screen of the laptop.

  Is this possible?

  See you soon

  Ash.

  As far as I know that something like this is not possible. The video signal may not be spited and sent to two video output ports. If you want to use two external monitors, you need an additional video source as Toshiba Dynadock or another solution.

• The main screen becomes secondary in a Setup dual monitor (DVI-HDMI)

  Original title: WINDOWS PROGRAMMERS: problem with OS Windows7 not being not able change the numbers of identifiers when using multiple screens and HDMI

  To be clear... This problem is with the Win7 OS - no video card GUI that allow to change number ID display on multiple monitors.

  Problem with several screens and the use of HDMI cables substituent and #1 assuming that for its corresponding display view identifier.

  Not always ID desired.

  But there is no way to change this.

  EXAMPLE:

  Monitor is configured as primary display (ID #1) using a DVI cable

  Then I connect my SONY Bravia or my LG HDTV displays using HDMI cables, the new screen automatically takes over as the display identifier #1 and the monitor becomes identifier #2.

  -This introduces to the identifiers is not something I want, need or want to deal with every time I use several displays. And it creates problems.

  There is NO way to correct or modify the identifiers.

  Please provide a FIX as soon as possible if you have an ounce of concern for the customer service.

  The solution can be as simple as:

  GO to THE control panel - appearance and customization - display - change display settings:

  Right CLICK... on one of the displays in the window to the left of "Detect" / "identify."

  Then the OPTION 'Change display login' with a list of relevant identifier numbers according to the number of multiple connected screens.

  Click 'apply '.

  CLICK ON 'OK '.

  and Voila! View identifiers are defined.

  WINDOWS:

  We, your customers, look forward to the difficulty of Windows update that contains this fix a lot expected and necessary.

  Thanks in advance for your collaboration and concerns about our satisfaction and ease of use than the loyal customers of your software.

  Feel free to send me the BETA version of the patch when his complete: * e-mail address is removed from the privacy *.

  Hi Jean-Pierre.

  Thank you for all the information related to the issue.

  This problem may occur if the display of the configuration settings dual monitor retain the configuration. Possible reasons could be installed on the computer outdated display driver.

  1. What is the brand and model of the computer or the graphics card?
  2. Are you using double display card? Sometimes changing the display settings for the display cards might solve the problem.

  First of all, if you have a display of the map or media panel installed on the computer, go to the control panel and change the setting under multiple display change. Assign the identity number according to the status monitor, then check if it retains the configuration when you restart the computer.

  Additionally, make sure that you have installed the latest version of the display driver for Windows 7 from the website of the manufacturer of the computer. Sometimes, if the driver is not being updated, the setting may not keep the entire installation. See the link to know how to update the driver on Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please keep us informed.

• Portege R500 - USB ports no longer for 35 to 60 seconds after standby

  When my R500 (running Vista Business) wakes in sleep mode, Vista is ready to be used within 7 seconds approximately. It would be great, except that the USB ports and the function Bluetooth wake for another 25 to 50 seconds.

  I use a USB or Bluetooth mouse and I find that this long delay start spoiling the otherwise excellent user experience.

  Has anyone noticed the same problem, or did someone knows a solution?

  You use a USB or Bluetooth mouse?

  Try updating the chipset drivers. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, an update of the BIOS could also solve the problem. Try it!

  You have installed the laptop with the Toshiba recovery disc or disc of Microsoft?

• Can you help me with a configuration of dual monitor DVI?

  I went through a few weeks of effort with it and seeking a

  final solution... I have an i7 Mini - 2012 model.  Two identical

  Acer S241HL LED monitors.  I need the same video display DVI on both

  screens.  A single monitor, close proximity to the Mini... about 1-2 feet...

  The other over a distance of 25 feet.

  It worked with a HDMI > DVI adapter to a Tripp Lite DVI splitter

  For more than a year... then became intermittent.  I tried a different separator,

  an Auralek - it worked fine about a week and then stopped.  Looks like

  dispatchers to stop sending any signal wake-up is necessary after a

  period of time where the computer or monitors have been turned off and then

  No video signal on the power of return.    Have tested all cables,

  recycled, reset everything that can be reset etc... with Mini and

  monitors...  Have had the same problem using Thunderbolt > DVI adapter.

  BTW, this works ok using a MiniDisplayPort > splitter VGA, but I want to

  Resolution DVI.

  Bottom line, is there a known reliable separator or any other approach

  It is relatively bulletproof to achieve...?  I found a

  another device by Sewell who is basically a different dispatcher amplified-

  who says someone worked "better" than the Tripp Lite...

  It appears on diagnostic tests, there is nothing wrong with the

  On the Mini HDMI port. Both monitors work fine individually

  When it is connected directly to the port DVI btw.

  I hope someone can help.

  Thank you!

  Mike

  VGA must have resolutions more than DVI, what ground had VGA?

• Port Replicator Slim 2 - resolution wide screen

  Hello

  Consider buying a Slim Port Replicator 2 for my Portege R500.
  I have two questions about the Replicator:

  The maximum specified. resolution is 1600 x 1200. I want to connect a monitor with a resolution of 1680 x 1050. Will this work?

  I'm using linux and I'm worried if there is some kind of windows driver only required to operate the Replicator?

  Hello

  I m not port replicator expert but to my knowledge the Slim Port Replicator 2 supports 1 x RGB (monitor), 1 x DVI port (video) that allows a resolution of 1600 x 1200 max.

  As mentioned the DVI port supports 1600x1200px max and other higher resolution is not possible.
  But maybe you'll be able to choose your favorite of the 1680 x 1050 resolution using RGB (monitor) port

  Best regards

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Portege R500 - configure the parser on the Port Replicator

  The system is Portege R500 with a port replicator Port MS Vista running. Port replicator has a Philips 19 "LCD monitor

  System has BEEN configured so that when the system was in the duplicator monitor 19 "inches would be active and system monitor is inactive.

  But, a few days before the following events occur, when the system is in the port replicator and its turned on screen (the one with the mobile progress indicator) Windows startup is displayed on the Port Replicator monitor, then the screen turns white and displays them on the screen on the monitor system, after entering the desktop on the monitor system.

  I live in a remote area, so I can't pop in the store of the local computer to ask for help.

  I would appreciate someone to give me some guidance as to where it configures the port replicator monitor configuration. I looked at the section Configuration screen Control Panel but it seems to be the performance of two monitors, it appears not to address the peculiarities of a laptop computer with a port replicator configuration

  Thank you

  Hello

  I have no Portege R500 but I ve used external monitor connected to my Tecra duplicator.
  Can you please tell me how you have configured previously?

  What is your external monitor set as primary monitor?

• Portégé R600-102 - Port Replicator connection DVI on Slim 2 problem

  I'm setting up a work environment to double screen.

  I have connected my Toshiba Slim Port Replicator 2 (PA3603E-1PRP) to my monitor LG (M197WD) cable DVI - D single-link and Belkin (P35952ed) to another monitor via a standard VGA cable.

  Although the second monitor works fine, the display on the DVI connection turns off intermittently and returns after a few seconds.

  I am running Win XP on Toshiba Portege R600-102.

  Any ideas how to solve this problem?

  Elpadre

  Hello

  As far as I know that the TOSHIBA Mobile Extension software should be updated to the State.
  Real software version is 3.87.00.

  Go to the Toshiba European page and update this!
  Also, please make sure that the BIOS is up-to-date as well!

  The use of both VGA and DVI ports should be possible since the R600 are supported by this feature.