STARTUP REPAIR RARE PLEASE HELP

Similar Questions

• What should I do if my windows does not start, and the Startup Repair is not help at all

  So today, I went and when I turned on my computer from sleep mode, it was perfectly fine.  I was watching a video, surf on internet and MSN messenger when my computer froze all of a sudden.  I waited for release, but it didn't.  Given that I could not turn off the computer either, I had no choice but to disconnect it from the computer.  However, later, when I tried to restart, the screen would go black after the black loading screen.  Subsequently, it would just restart and startup repair would begin.  I tried to restore Systen and ran several times startup repair.  In addition, it does not even boot mode safe.  Here are the details of the problem for the Startup Repair:
   
  Problem event name: Startup repairV2

  Signature of the problem 01: AutoFailover

  Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

  Prob Sig 03:5

  Prob GIS 04:393220

  Prob Sig 05: NoRootCause

  Prob Sig 06: NoRootCause

  Prob GIS 07:0

  Prob GIS 08: 1

  Prob Sig 09: SystemRestore

  
  Prob GIS 10:0

  OS version: 6.0.6001.2.1.0.256.1
  Local ID: 1033

  Please help me find a way to restart the computer without having to reinstall Windows because I don't have a back-uped none of my files, so I would lose everything...

   
  Thank you
  Jeremy

  Hello

  ·         How have you tried to do system restore?

  I recommend you to restore system using a Windows Vista DVD.

  Here's how:

  To open the Options menu system recovery using a system repair disc or a Windows Vista installation disc

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows Vista installation disc or a system repair disc previously.

  To use this method, you need to restart (boot) your computer using the disk.
  1 insert the disc.
  2. restart your computer using the power button on the computer.
  3. If you are prompted, press any key to start Windows from the installation disc.
  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.

  4. choose your language settings, and then click Next.
  5. If you are using the Windows installation disc, click on repair your computer.
  6. Select the Windows installation you want to repair, and then click Next.
  7. in the System Recovery Options menu, click a tool to open it.

• Adobe Acrobat 9.0 Pro hangs at startup: runtime error - please help

  I have CS4 from Adobe installed on my Windows 7 PC. In addition, I have Adobe Reader XI and InDesign installed 6. If I remember correctly, after that I installed Adobe Reader XI, I uninstalled the version of the player that came with CS4.

  So here's my problem: when I try to download a PDF file that was sent to me in an email or open one that already exists on my computer, in this case:

  Runtime error!

  Program: C...

  The application requested execution to terminate in an unusual way.

  When I click OK, I get this:

  Adobe Acrobat 9.0 has stopped working.

  If I try Adobe Acrobat 9.0 Pro in my Start menu, the same thing happens.

  It makes no sense for me because

  1. I don't have the knowledge to understand this. I don't know what is the duration.
  2. Before a computer collapse a few months ago and a complete reinstallation of everything that these programs all works beautifully.
  3. I do not understand why, when I try to open a PDF file by e-mail, they open automatically in Adobe Reader XI rather than Adobe Acrobat. The general idea that people is not being in a position open and view PDFs sent, of which they were sent, which is what the reader is for and generally do not change them, that's what Adobe Acrobat is for?
  4. If, instead of trying to open the PDF files by e-mail, I save them on my computer, I can launch Adobe Reader XI and open within the program without any problem. It's OK, if I just need to view the PDF file, but I have to be able to edit a PDF file also, so I need to get Adobe Acrobat 9.0 to work.

  Relocation of Adobe Acrobat 9.0 Pro help? Is it possible to reinstall only from the program installation diskettes or have to reinstall CS4 entirely?

  I can't open Adobe Acrobat 9.0 at all, for all the solutions that must be made when the program is opened are not possible.

  I would really appreciate the help.

  SOLVED!

  Reset Internet Explorer did not work, reinstall Acrobat 9.0 Pro didn't work, but change a fact registry key.

  Here is where I found the solution:

  Error Microsoft Visual C++ Runtime Library, opening files PDF - Microsoft Community

  Here is the message in question, but until you try it, read my post below:

  Hello

  This is known problem with Acrobat for several versions now, current fix from Adobe is just to update their software: http://kb2.adobe.com/cps/404/kb404597.html

  The problem is with the data of application given erroneous instructions.

  "The affected user has a folder Application Data redirected and so the path to the network that contains the Application data uses a UNC path that begins with \. "This UNC path causes Acrobat 9.0 and Adobe Reader 9.0 incorrectly analyzes the Application data path and give the error message.

  A possible Solution would be to go into the registry. Left click type 'regedit' and right-click and run the program with "run as Administrator". Go to Hkey_Current_User\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders and make sure see where pointing "AppData". If it is oriented towards 'data %UserProfile%/Application' change it to point to '% UserProfile%/AppData/Roaming '.

  BUT, be careful of one thing: this poster seems to have used accidentally oblique when he should have used backslashes. Look at the last line of his post where he advises ' if it points to "%UserProfile%/Application Data" change to point to '% UserProfile%/AppData/Roaming'. '. You can find, or at least I did, that this key has a backslash, not a slash, so change what I found: "%UserProfile%\Application Data" "% UserProfile%\AppData\Roaming" worked and now Acrobat 9.0 works very well.

• Earlier to let windows 7 update itself, now system won't boot & Startup Repair windows don't fix it either, help please?

  said the system offline?

  http://Windows.Microsoft.com/en-AU/Windows7/Startup-Repair-frequently-asked-questions

  What happens if startup repair is unable to solve my problem?

  If the repairs are not successful, you will see a summary of the problem and links to contact for support information. Your computer manufacturer may include additional support information. For more information, see What are the system recovery options in Windows 7?

• Windows Vista repair boot loop - please help.

  Hello

  I had trouble with my laptop startup and having the dreaded loop of the Startup Repair. It started last night and I did everything I could to get it to allow me to connect on the long desk, enough to get my files, but there all come without result. I am now on my attempt 67th to get startup repair and desperately need help. My only problem is, is I have not backed up my files both needs so I can't do a full restore of the PC. Call me stupid, because I already know that I am.

  I already tried the three security modes, the last good configuration known and all the rest on the list of F8, but also contact Toshiba support, but none of them has nothing to help me. I did the whole thing from the CHKDSK, but she came back everything was clean, much like the Startup Repair tool says that there is 1 origin but he can't find not and comes up with the error code 0x0. I do not have a re-temperament of OS disc either and nor do I live near a "Geek Squad" of any kind. In addition, I can't restore my computer to an earlier point.

  I am at my wits end and very close to burst into tears because I can't get my laptop to work and I think my only option I have left is to do a complete restore of the PC, and I REALLY don't want to do that. My life is on my computer and I feel so stupid for it backs do not. This will definitely a lesson to be learned.

  My computer is a model of Toshiba Satellite L355D with windows SP2 and Vistax32bit.

  Please help me, and if this issue is resolved, then, I will be eternally grateful.

  Thank you for your time,

  MissSakura

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Computer won't startup, startup repair doesn't work & stuck in loading programs, safe mode please wait.

  Nothing seems to help.  Need suggestions! Startup Repair seems to just repeat the bar back for more than an hour, tried safe mode, but no option after I come home... says please wait and hangs on the programs loading...  ANY suggestion is appreciated!  Thank you! Windows Vista

  Hi MARSHAFAYE,

  Remember to make changes before this problem?

  Do you have an error message when you start normally?

  Method 1: Follow the steps described in the section below and then call Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

   

  Method 2: Run the Windows recovery environment system restore to put the computer to an earlier point in time.  See the front link for steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

• SP1 update has disabled the startup. Please help (error 0x8007000E)

  original title: SP1 update has disabled the startup. Help, please

  I ran the upgrade of windows (84 files) and restarted the pc, checking upgrade again and he said updated service pack 1 or SP1 so I start making level and after a long time its still shows the installation but the icon in the lower right shows 100% so I clicked on cancel and then restarted the pc.

  Now Im getting a Startup Repair error box that search startup errors but says "Windows cannot repair this computer automatically. I can click on 'Finish' or 'Cancel' if I click on end it shuts down the pc if I click cancel it reboots the pc. another box pops up that says "Startup Repair cannot repair this computer automatically.
  My options are 'Send info on this problem (recommended)' or 'do not send' if I click it scans a second and then the box goes away leaving the 1st box of error described above.

  I tried to hit F8 and using 'repair your computer' this is for me the box of system recovery options. Sign in with my user name and password to choose a recovery tool.

  • Startup Repair
  • system restore
  • restore complete Windows pc
  • Windows memory diagnostic tool
  • command prompt
  • Recovery Manager

  I tried startup repair, but get the same message as above.
  I tried the system restore (which does not affect any of my files, documents, etc..) Then he said: choose a restore point that I want to use, but the only option is the 31/05/2011 install Windows Vista Service Pack 1... then I go ahead and try it and it says it will restart my pc and apply the changes. It initializes, file restore, then a box pop up saying system restore has failed. has failed because of an unspecified error. Not enough memory is available to complete this operation. (0x8007000E)

  So I try here this forum...
  Question: Lets say there's someone who can get my pc back to normal... what I need updated SP1 and SP2?

  Hello

  Not having the system restore, you can try a different restore point and check. If the problem persists, then you must try a startup repair and system restore boot from the disk Installation of Windows Vista.

  You can try to disconnect all the external devices (except keyboard and mouse) and tries to boot from the disk and check.

  For more information, consult the following link:

  What are the system recovery options in Windows Vista?

  You can also check out the following link and check error 0x8007000E

  Common causes and solutions to the problems of backup, System Restore and computer backup

  Hope this information is useful.

• Please help to recover and repair my partitions

  Hi all

  I tried to partition my MacBook Pro (with the retina with El Capitan) and I totally messed up my laptop.

  I deleted something very important and now the system is in a State. I had to download and run El Capitan from a usb key and when I try to make the USB bootable with Diskmaker X, I get a zero... error. Now, I can only use my Mac with usb in. I tried to recover and reinstall but I get an error all round.

  My biggest mistake was that I never backed up anything.

  Here is my list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 120.5 disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 15.6 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS GB 14.7 Untitled disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  Please help me

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  If the above does not work, then you will need to erase the disc then install;

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• IRQL_NOT_LESS_OR_EQUAL blue screen. No luck with the help, can't "Repair computer". Help, please!

  Whole new generation that has been very well,

  Mobo: EVGA P55 SLI,

  Processor: Intel Core i7 860,

  RAM: Mushkin matched 2 X 2 = 4 GB

  PS: Blue Antec 750W

  GPU: EVGA Nvidia GTX 260 SLI (x 2)

  HD' Samsung 750Go (x 2) RAID 1

  DVD RW

  Blue Ray RW

  OS: Vista Edition Home Premium 64-bit

  System has been great from the GET go, there are more than 2 weeks. Never a failure to the no boot, no lock ups etc. Woke up in the middle of the night last week with cmptr attempt to restart. No new software or hardware installed had been. Nothing worked, quiet dampened.

  From there on, I was not able to start Windows.

  I entered the BIOS and tried to start a well known point... nothing. Always get blue screen. I have reset the CMOS on the mobo, removed the battery on the mobo and reinstalled. I unplugged the two hard drives power and SATA cables, bought a NEW (third) HD and installed, with only one new HD connected, with a full version of Windows Vista DVD in the CD/DVD drive, tried to boot Windows from scratch... still get the blue screen?

  Blue screen says:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  IRQL_NOT_LESS_OR_EQUAL

  If this is the first time...

  Check that any hardware or software is installed correctly.

  technical info:

  STOP: 0X0000000A

  (0xFFFFFA8D839EFB18),

  (0 x 0000000000000002),

  (0 x 0000000000000001),

  (0xFFFFF8000A481DD2)

  I was able to run the memory test and it came back without errors. I was not able to get to "repair your computer", as the beginning is never far away. When the computer reboots, it comes to the sequence: normal mobo beeps (five) than even that when the system was working fine... then I get the graph of the mobo splash screen EVGA P55 SLI,... then black screen with "Windows loading files"... which appears just above the loading bar (it looks like gage fuel fill from left to right).

  Once the bar then "fills" Blue Screen of Death!

  It's EXTREMELY frustrating because it was built for me by an employee of INTEL (very smart read), all latest drivers etc. Very little software loaded on the system. Most of the aid that I read guess you can operate within Windows already... Catch 22! I can't!

  Hello

  You get beeps when it worked? This is not normal.

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  =======================================

  Think that material:

  Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates - pilot
  updates), or add key software lately? Pilots and security/antivirus/antispyware products are also likely
  suspects. Next message is my generic driver updated methods to use when you get to this section of the
  troubleshooter.

  You can access Mode without fail - repeatedly press F8 as you start - last good configuration or system restore known?

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Look in the Event Viewer to see if something is reported on these reboots.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  BCCode: a

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  -------------------------------------------------------------------------

  It is my generic troubleshooting tool and can probably give more specific help when you give the ICC codes.

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• improve slow system performance... I don't know what programs need to run at startup? Please help me I have windows 7 Home Basic

  . I don't know what programs need to run at startup? Please help me I have windows 7 Home Basic

  Each computer has different startup programs - if you if you stop that you need you can turn it back on. See step 5 to turn them off.

  Windows 7 is slow

  (1) unplug all devices such as printers, external hard drives, microphone, webcams etc.

  (2) if the computer has only 1 GB or 2 GB of RAM, try adding more RAM.
  (3) make sure that your drivers are up-to-date.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  (4) defragment your Windows 7 computer:
  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  (5) reduce the start up programs:
  (A) click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  (B) on the general tab, click Selective startup.
  (C) then change the tabs by clicking on the start tab
  (D) uncheck the programs that you do not want to start when your computer starts (do not turn off your antivirus).
  (E) click OK, and then restart the computer.

  (6) disable some visual effects in Windows 7
  There are a lot of Visual effects that can be disabled safely to speed up Windows 7.
  A. Click Start, right click on "Computer" and select "Properties".
  B. click on "Advanced system settings" in the left pane to open the"System Properties".»
  C. Select the "Advanced" tab from him. Then, under 'Performance', click on 'settings '.
  D. now uncheck all the options that you do not want to use (some options disables Aero).
  E. restart the computer.

  (7) open the resolution of Performance problems
  A. open the Troubleshoot utility of performance by clicking on the button start.
  (B) in the search box, type "convenience store" and then click Troubleshooting.
  C. under system and security, click on search performance issues.

• How repair my iphone 6s hung in camera I can't able to access on the other and I can't able to swtich offf if sleep button the tank please help me

  I took a few pictures without unlocking my iphone 6 s after that he stuck behind closed doors himself and tactile assitive works but can't go to the home page in my laptop, I tried to change my sleep the mobile tank button that works also not I'm not what to do. Please help me solve this problem.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support

• HP Pavilion g4-2235dx Notebook PC stuck on auto repair for a month now... Please help...

  so my laptop HP Pavilion g4-2235dx product number: C3Q50UA has been slain in automatic mode of repair for like a month now... it goes not far than this screen... the day it happened first I booted up & it real quickly flashed a blue screen that says my computer needs to reboot so itll restart itself for me then it rebooted & went to the screen hp for 10-15 minutes , then went to the automatic preparation of repair screen for about 2 hours, then the screen comes to have dark & remained like that all night... the next day I turned off the laptop & started again & it would be on the screen hp for a long time & id farm & turn on again, then he would start, restart itself then go to auto repair. If I stop it on the page of sutomatic repair then it would be just cranking up the hp screen & nothing else but if id shut down on the hp screen & turn it back on go to repair automatic page... back & suite back & rear returns & suite for days... Finally once a week or so, I gave up... i left on the page of auto repair for about 2 days directly plugged in so he would die just in case he might just need more time but 2 days was too long so I finally unplugged it & left on this page until the battery is dead & haven't touched since... Ive read some of the other posts on the loop of auto repair & what to do, but I don't want to lose all my stuff on the laptop as my images/videos(thought i saved them to skydrive but apparently i didn't complete the whole process to access my stuff from another windows 8 device)... I bought the used laptop & the warranty has already expired... any installation of windows 8 flash disk/drive. I have no recovery disk. so I have no way to replace my OS or recover my data that are already on this laptop... is there something I can do to get out of this dealie loop of auto repair without an installation/recovery disk/flash drive?

  You'll need a Windows 8 rescue flashdisk, HP usb recovery media or disk recovery in order to access the safe mode and the Startup Repair. The cost of a recovery of HP USB is not that much to around $ 30.00 USD. You can also ask a friend or relative whose computer has the same BONE to make a recovery of Windows 8 key for you.

  If you want to recover data from the hard disk before performing any repairs more, then you will need to remove the hard drive. You have the choice to start the installation in a usb enclosure, using a usb cable to power\sata or install temporarily to with a sata available on a desktop at home.

• Please help - just downloaded Illustrator and it crashes after startup!

  Hi - I just download Ai and it doesn't work. I get this error message saying: Adobe Illustrator CC 2015 has stopped working and leaves the program.

  I tried to turn off the graphics card and that didn't work.

  But I'm not a technical person and I am very stuck.

  Can someone please help or advise?

  I use Windows on a Lenovo U330 Ultrabook 10.

  Thank you!

  Hi emilys1970,

  Thanks for posting this thread.

  Please share the file 'Illustrator.dmp' using the drop box or any other web site sharing.

  Follow these steps to create the dump file:

  Step 1: When I displays the dialog box message "Adobe Illustrator CC 2015 has stopped working" do not remove he

  Step 2: Launch 'Task Manager' and under 'Applications' tab right click on "Adobe Illustrator" to open the contextual pop-up menu

  Step 3: Select the option 'Create a Dump file' and wait for the process must be completed

  Step 4: once the end dialog box gets displayed click on the OK button to close the dialog box.

  Step 5: Press "Windows + r" to open the "Run" dialog OS WIN

  Step 6: Type "%temp%" in the edit field, press the Enter key

  Step 7: In the search for (Temp folder) window Explorer for files 'Illustrator.dmp' and share all of the sharing sites online help

  8: Please also shares details about the Version of Illustrator and OS WIN (64-bit or 32-bit) to [email protected]

  Thank you best regards &,.

  Rambour Singh

  Illustrator team

• Please help me with my imac beachballing running El Capitan

  My imac is in trouble and my mental well-being is threatened!

  If you could please help, it would be most appreciated.

  I've included an etrecheck report:

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-25 12:37:55

  Download EtreCheck from https://etrecheck.com

  Time 01:45

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Beachballing

  Description:

  Incredibly slow at the same time. Sometimes freezes completely and will not be closed. None of the keyboard shortcuts will help you. I need to use the power button on the back to turn it off.

  And even then, sometimes, after the reboot, the problem persists. And other times, I need to restart several times.

  Hardware Information: ⓘ

  iMac (27 inch, at the end of 2013)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac14, 2

  1 3.4 GHz Intel Core i5 CPU: 4 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n/ac

  Video information: ⓘ

  NVIDIA GeForce GTX 775M - VRAM: 2048 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 999,35 go-go (585,40 free) - 3 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  GenesysLogic USB3.0 Hub 2 TB

  Seagate Backup + Desk 2 TB

  EFI (disk1s1) < not mounted >: 315 MB

  Seagate Backup Drive (disk1s2) Volumes/Seagate Backup plus Drive: 2,00 (1.03 free) tuberculosis

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Burr-Brown of TI USB Audio CODEC

  Reader SuperDrive for MacBook Air Apple Inc..

  GenesysLogic USB2.0 hub

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  NG.UDs.netusb.controller [no charge] (1.59-2016-06-06) [Support]

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 159 tasks Apple

  [operation] 72 tasks Apple

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 156 tasks Apple

  [operation] 87 tasks Apple

  Launch officers: ⓘ

  [loading] com.citrix.AuthManager_Mac.plist (2015-03-17) [Support]

  [loading] com.citrix.ReceiverHelper.plist (2015-03-17) [Support]

  [operation] com.citrix.ServiceRecords.plist (2015-03-17) [Support]

  User launch officers: ⓘ

  [loading] com.google.keystone.agent.plist (2016-03-05) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Other applications: ⓘ

  [ongoing] com.google.Chrome.62432

  [loading] 394 tasks Apple

  [operation] 181 tasks Apple

  Plug-ins Internet: ⓘ

  Default browser: 601 - SDK 10.11 (2016-05-21)

  QuickTime Plugin: 7.7.3 (2016-05-21)

  CitrixICAClientPlugIn: 11.9.15 - SDK 10.9 (2015-03-17) [Support]

  3rd party preference panes: ⓘ

  None

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 413,94 GB

  Destinations:

  Backup drive Seagate Plus [Local]

  Total size: 2.00 TB

  Total number of backups: 44

  An older backup: 18/10/2014, 17:07

  Last backup: 06 23, 2016, 19:32

  Size of backup drive: adequate

  Size of backup 2.00 TB > (disc 413,94 GB X 3)

  Top of page process CPU: ⓘ

  3% WindowServer

  2% fontd

  0% kernel_task

  0% cloudpaird

  Top of page process of memory: ⓘ

  636 MB kernel_task

  270 MB mdworker (15)

  197 MB Google Chrome Helper (2)

  QuickLookSatellite 139 MB

  Chrome Google 139 MB

  Virtual memory information: ⓘ

  4.46 GB of free RAM

  3.54 GB of used RAM (1.69 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  25 June 2016, 12:20:41 self-test - spent

  June 22, 2016, 20:17 ~/Library/Logs/DiagnosticReports/com.apple.Safari.SafeBrowsing.Service_2016-06-22-201700_ [redacted] .crash

  /System/Library/PrivateFrameworks/SafariSafeBrowsing.Framework/versions/A/com.a people. Safari.SafeBrowsing.Service

  June 22, 2016, 20:10:43 ~/Library/Logs/DiagnosticReports/com.apple.Safari.SafeBrowsing.Service_2016-06-22-201043_ [redacted] .crash

  June 22, 2016, 20:09:37 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.Networking_2016-06-22-200937_ [redacted] .crash

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.Networking.xpc/Contents/MacOS/com.apple.WebKit.Networking

  June 22, 2016, 20:07:30 [redacted] ~/Library/Logs/DiagnosticReports/com.apple.Safari.SafeBrowsing.Service_2016-06-22-200730_ .crash

  June 22, 2016, 19:53:59 ~/Library/Logs/DiagnosticReports/com.apple.Safari.SafeBrowsing.Service_2016-06-22-195359_ [redacted] .crash

  June 22, 2016, 19:45:57 [redacted] ~/Library/Logs/DiagnosticReports/com.apple.Safari.SafeBrowsing.Service_2016-06-22-194557_ .crash

  Hard drive appears to be faulty.

  It seems that you have current backups, so you should be able to recover if the drive completely fails.

  Run disk utility to repair the disk and also check the SMART State.

  When a player starts to falter, it is almost certain, it will fail. There is really no cover failures of IO because it indicates that the player no longer has the ability to remap bad blocks.

  If you have AppleCare, you can probably still get it replaced. However, they are fairly cheap these days and quite easy to replace yourself.

• Pavilion series 2100 p6: my computer says "operating system not found" Please help me

  I tried to reset my pc because my computer is very slow so I tried, during the reset there were times when he could not reset so I continued to do and then a message showed "an operating system not found. Try disconnecting all drives that do not contain an operating system". Please help me. I really don't much about computers. And I also had windows 10

  Juan8

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to the page of the product HP for your PC, it came not with preinstalled Win10.  THIS means that you have done the upgrade to Win10.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work.

  The problem you mentioned is usually due to one of two basic problems:
  (1) defective hard drive
  (2) damaged/missing bootloader files
  
  As to the first, please follow the instructions in this link to test your hard drive: http://support.hp.com/us-en/document/c00439024
  
  If that confirms that your drive has failed, then you will need to replace it.  Please report back if this is the case.
  
  As for the second, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck