problem of his sudden on Pavilion G7

Similar Questions

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on

• My sister has problems on his laptop, how can I connect to the laptop with my labtop to help him with his computer problems? Thank you.

  My sister has problems on his laptop, how can I connect to laptop with my labtop to help her with her computer problems when I live several States away? Please help me if you know how to do this thank you.

  Suggest you use Team Viewer, free version.
  It is used here every day for several hours.

  Please see the links below for more details...
  http://www.TeamViewer.com/en/index.aspx
  http://www.TeamViewer.com/en/products/remotecontrol.aspx
  http://www.TeamViewer.com/en/help/cat15-remote-control.aspx

• Problem of his Palm t5 (research)

  Hello!

  Two days ago my t5 palm stopped play sounds via the internal speaker (his helmet seems to be ok). Posts on this forum say that it is a hardware problem (micro-switch is stuck in a headphone jack). At least in my case, I need a more complex explanation:

  -The internal speaker stopped working without any interference in the headphones (I do not plug headphones into the Palm). Most people have this problem after disconnecting the headset.

  -J' was able to set my speakers to life by simply plugging in the AC adapter / CC. President Ping with a usual sound and worked for a few hours, that dies again.

  -At least twice, I could hear sounds after a hard reset. But only until I tried to launch any application. Then he was silent again.

  -As for now, I hear 'clicks' of the speaker when I connect my T5 to hotsync cable and press the hotsync button. Still more - if I have press the hotsync button while the cable is not plugged into the USB port - and wait 30 to 40 seconds, I see a box with the message "hotsync failure" alarm and can hear the sound of the mono speaker alarm Palm. So it is again being mute.

  With a background in electronics, I opened the unit and checked the sound elements visible:

  -L' speaker is OK, the measured resistance is recommended on the speaker (7.8 vs 8.0 ohm)

  -Points of motherboard are OK

  -There is a voltage V 1.68 on the two points vs. the ground, but no difference in voltage between the pads.

  -5-pin headset plug seems to be OK. Microswitch pads (two pads on a basis of a Jack) have no resistance measured when the socket is empty and are disconnected when headphones are plugged in.

  -J' have tried to short-circuit buffers with external cable - but no effect dip switch - sound is always redirected to the helmet.

  -J' tried to connect the internal speaker to the headphone channel. It works, but the rate of release of palm is unacceptable (headphones are devices to 30 ohms, and I believe that internal speaker is connected through some elements of energy saving).

  I'm completely perplexed with my problem of his palm. This may not be a pure hardware problem as he plays sometimes a few sounds via mono speaker. But if this is a problem in a software - how in hell, he survives device resets?

  Any ideas?

  Hello!

  Indeed, the problem was multiple connector. It seems that cable flat keyboard connection and connector multiple base with a main card had isolation deteriorated between some of his sons and a surface of steel on the base. Now, I remember that some time ago my Palm was irregularly to hot-sync mode even when the hot sync cable was not plugged.

  After that I put a piece of insulation between the metal base and a flat cable (which covers the hard edge of the base metal) mono speaker returned to life. Please put this in a FAQ or KB if possible.

  It would be nice for palm-engineers (if palm still has some) to build a utility program that allows the user to select the device audio default substitution of the system. See cool head for treo on sourceforge (does not work on palm t-series).

  Thank you!

  Message relates to: Tungsten T5

• Problem with his comments before signing the PDF.

  Problem with his comments before signing the PDF.

  My problem is with sticky notes that I need to use my comments frequently.

  When I place my signature and save document commented, disappear all pop-up windows and icons of sticky notes go "flat" of the document.

  It's the same with all the annotation tools and pop ups disappear if I use them with.

  Is there a way to keep comments and pop-ups 'living' signing and recording after his comments?

  Fig 1: commented the document before you sign and save.

  

  Photo 2: after you save the signed document. Pop - ups disappeared and sticky notes are here to stay.

  

  Hey Tomi,

  It was a typo on the part of Ajlan. It was supposed to read "Lock after signing the Document. Please see the screenshot below. However, this check box only appears in the dialog box sign the Document If you sign the last signature on the PDF field. If you don't, it's because there are other unsigned signature fields.

  Steve

  

• Problem upgrading processor on HP Pavilion Dv6628us

  The product name and number:

  HP Pavilion DV6000 & DV6628us number

  Operating system installed:

  Windows 7 32 bit

  Error message:

  I'm upgraded intel core 2 duo processor 1.45 ghz to 2.4 ghz. When I do, my computer turns on then turns off and the fan runs very fast. I was wondering if it is same compatiable.

  All the changes made to your system before the problem occurred:

  Nope - just as I pass chips

  Say hello to new tycars.

  I have somehow missed this processor. Be sure to update the wire to leave wire in order to let the forum know how the process goes for you.

  Have a great day!

• problems installing network drivers hp pavilion g6-1d70us

  Hi, I have just again once installed a new operating system which is family Win7 premium g4 bits to my laptop, now I have problems with its network drivers.

  I tried to install the network drivers, but couldn't, I downloaded it from hp.com

  Ethernet controller

  PCi Simple communications controller.

  Properties of the SM Bus controller

  Properties of the network controller

  I think that these problems, why I can't connect to a wifi.tried facility does not solve the network drivers for hp.com.but my problem.it appears with a yellow exclamation point in Device Manager.

  I have to insert the modem to my laptop Pocket wifi just to connect to the internet, everything works well wait these above 4

  IM using a laptop Hp Pavilion g6-1d70us

  Hello:

  Here are the links to the drivers you need for this model.

  TheOldMan already granted by the driver for the controller PCI of Comms Simple...

  SmBus:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-1&cc=us&DLC=en&LC=en&OS=4063&product=5103993&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102007-1&cc=us&DLC=en&LC=en&OS=4063&product=5103993&sw_lang=

  Network controller (based on what HP shows up in the list of the parts for your model).

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95652-1&cc=us&DLC=en&LC=en&OS=4063&product=5218682&sw_lang=

• problems with his Win7 in some games

  I recently installed windows 7 32 bit and several games in my collection to test his game performance.
  WoW - no
  issues of SoC - n ° Stalker
  BioShock-minor sound glitches
  Crysis - serious sound problems

  I have updated audio drivers, windows and games without result.
  I tried turning the max possible in the lowest possible sound quality and have tried different sets of speakers.
  its integrated usb 2 different cards have been tested with the same questions.
  Ran two games in each mode of compatibility from xp to vista and as an administrator.
  I changed the parameters of gfx max min without changing the sound problems.

  After all this I did no progress whatsoever in fixing this issue. I know that Bioshock is not yet listed as compatible, but Crysis is.

  I can't think of anything else to try at this time but would like to than any thought that you guys have...

  Did you do an upgrade of Vista?  You need to maybe uninstall and reinstall your games.  Sound cards are often based on the bus in your hardware drivers, so you can, of course, that you have the drivers and the latest drivers of motherboard for your machine and not only your audio drivers.  Even in this case, not all audio drivers are written in the same, and the problems that they have not yet updated (but can be aware of).  I would try the drivers first and then look for patches for games so that contact your sound card manufacturer to see if they are aware of the problem or know a work-around.

  K

• Pavilion for computer laptop-15-p107nz: problem of SDS upgrade on Pavilion laptop - 15-p107nz

  Hello

  I recently bought a HP Pavilion Notebook - 15-p107nz and decided to do an SSD upgrade. Also bought the BX100 Crucial 250 GB, but the computer does not recognize it. When this window where I can manage partitions and choose the convening HDD/SSD (so that the formatting), the right SSD does not appear. When I connect the old HDD in return, it seems everything as usual!

  What is going on? There is still no new version available BIOS.

  Could you please help? I'm so frustrated, lost 2 whole days, try something, but without success.

  Best regards

  Pedro Pratas

  PS: Apolagize for any error in English.

  I actually have enough. I see no solution in short time, once I've tried everything, and the worst thing is, after all, what I tried and time losted in the present, to see that another brand of SSD works fine without problems.  Last night, tried my Crucial SSD in my HP Envy 23-n200np Beats all-in-One special edition, which still had a HARD drive, and everything worked well also.  Decided to do the upgrade for the Crucial SSD, and just ordered another Samsung SSD 850 Evo for my HP laptop. I want to thank very you much, really. Even without visible results (because it's a particular problem) you helped a lot, and I learned new things. Thank you very much a companion. God bless you!

  Best regards

  Pedro Pratas

• His stutters on Pavilion dv4-1120us

  I had my Pavilion dv4 1120us for Christmas and put it in place. It is under Vista Home premium with SP1. I noticed that from time to time during sound playback slows and stutters for a few seconds and then the catch usually upward. He made cela hung together through its speakers and external speakers. The condition seems insensitive to changes in devices. I noticed that no special request is responsible for either. It occurred when streamming myspace and playlist.com, when watching a dvd in both media center, wmp and VLC, windows included during playback of CD and by practicing a game (total annihilation). I also noticed that the problem persisted even when I extracted decrease the number of processes ranging from 80 to 60 something.
  I thought that the problem may lie simply in Vista and the bloat-ware that came on the computer. Today I inistalled dual-boot ubuntu and the problem is ongoing, as well as the headphone jack and speakers single switch with Vista (I think it's just a driver issue...), I would like to know how to solve the problem at least with Vista and with linux so would be good. Thanks for any help.

  just a Word to all those who want to run ubuntu on the hp all, for those with audio HDA sound bugs are at http://ubuntuforums.org/showthread.php?t=1043568.   Thanks for all the help.

• Sound appears choopy on the computer, problem with his system and multiple programs.

  System model: OptiPlex GX620 BIOS version: A07 Dell Inc.

  Operating system Microsoft Windows XP Home Edition Version: 5.1.2600 Service Pack: 3.0

  I started to get choppy sound I think immediately after trying to play dvd on pc Sony mini. I tried all the xp help lines but nothing. So I tried to restore to previous date n that he had failed on 3 different dates with system check points. Any ideas? The sound is choppy on the system of sound waves, music from Media Player, itunes, the journal and disconnection of waves.

  Original title: his jerky

  I have attached the codecs that they did not help. I finally got a restore to work prior to the date that has begun and the problem seems to have disappeared. Then maybe some settings have changed in the background or I had a virus any. Has done a lot of analysis, but nothing came. Do not know if the same thing happened I I put in another dvd mini...

• Problem recognizing USB - suddenly PC does not recognize any USB port

  I have a HP Pavilion a1310n computer with Microsoft Windows XP.  Recently, my computer stopped recognizing one of the 3 USB ports.  When I put in a flash drive, nothing registered.  Help.

  Hello

   
  Remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
   
  Method 1:
   
  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  
  http://support.Microsoft.com/kb/925196
   
  Method 2:

   

  Advanced troubleshooting tips for General USB for Windows XP problems
  

  http://support.Microsoft.com/?kbid=310575

   

  Hope this information helps.

• Well, I have a problem with a laptop HP Pavilion dv6 1410-ss

  Buna am o problema cu a computer hp laptop pavilion Dv6 ss 1410 am dat update bios if the nu may porneste

  32 cu sau biţi Windows 7 64? Asiguraţi-vă că vă download BIOS corect. Yes să worry click right actualizarea şi spune ca administrator Executare BIOS-ului pe.

• Problem reinstalling Windows 7 on Pavilion dm1 netbook with software HP-published records

  Hello, I have a Pavilion dm1 that require a clean installation of the Windows 7 operating system due to a keylogger problem that could not be defeated.  After backing up my system, I used DBAN Boot and Nuke to zero to HD.  I tried to reinstall the OS with the published HP recovery disks.  Everything seems to load fine until I got to the screen showing "Windows Setup".  There is a small pop-up screen indicating "Windows is now set the following...". "The 'installing the software preparation" has a check mark next to it, and the order of the day on the "Software Installation" list is highlighted. I then get an another pop up screen indicating "You must restart your computer to apply these changes", but the touchpad does not work where I can still get the pointer to appear to make a choice.  The system hangs just upward at this stage.  Any recommendations would be appreciated.  Thank you.

  How do you lond it hang before you finished it?

  HP recovery restarts on its own (several times) you shouldn't have to do anything and it is recommended that you do not use the keyboard or a touch pad during the recovery process, it can be a process hours several retrieving records. Be sure the wireless is turned on when you start the recovery process.

• Touchpad problems with Windows Vista, HP Pavilion dv7

  For some time now, I had problems using the touchpad on my HP Pavilion dv7-1260 mobile.  When I press the left button of the mouse, I have the menu that is displayed when you press the right button of the mouse.  I changed the settings on a million times and I reinstalled the drivers, but nothing seems to work.  Maybe I need to change touchpad sensitivy or something, but I don't know how to do it on Windows Vista.

  Hello

  Looks like there is a problem with the hardware with the TouchPad so check with the help of HP, their online
  documentation and drivers and ask questions in the forums about isseu known with this model.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">