PROBLEM OF MOUNT SONY18-200 E

Similar Questions

• Problems of Mount ReadyNASOS 6.4.0

  I'm getting a timeout trying to mount on an another NAS Netgear. The problems started when I updated to 6.4.0.

  I tried the 6.4.1 - T35 BETA (Beta 3) which seems to fix the problem initially but now will not rise.

  Can anyone help?

  Ok. I give up; I did a factory restore as 6.4.0 is simply too unstable.

  My advice is to stay on 6.2.5 unless you, spend hours to discover why is more simple tricks that are used to work.

• Problem PCI-e Vostro 200

  Hi, as stated I have a Vostro 200 Slim I bought an Asus EAH3450 PCI - e low profile card works fine on another computer, the Vostro I don't get any video, if I change the VGA conector for the video shipped with the computer on a screen saying I need to unplug this cable and connect it to the new card, which is what I've done , its like onboard video can detect the monitor, even if it is not plugged in, any ideas? TIA

  I found a solution. Well well, for the Vostro 220, but I think this would work for your question. Access to my computer and right click - Select Manager. Expand graphics cards and click right then on the first, and then select Disable. Mine is an Intel (not sure of the model specofoc). Then restart the PC with the VGA or DVI cable connected to the Nvidia card. You can check the BIOS to see if you have PCI-express card enabled at startup. It was under my chipset in advance options. Then install the Nvidia drivers if they have not been installed. I have a Nvidia Quad PCI-e 290 and did it with a 280 PCI. I don't have this problem with Vostro that I did this with HP and was easy plug-and-play, the driver installation. After the reboot, change your graphics options through Nvidia Control Panel. I hope this helps.

• Problem touch screen, X 200 Tablet with enchanced multitouch - No. TOUCH OFFERS all THE

  Hello everyone, I just bought a Lenovo X 200 tablet with multitouch improved on November 13 when they were selling nice employee. I customized the 200 improved package multitouch X and added a whole bunch of features. I had the camera, turbo memory, 4 GB of ram, fingerprint reader and works. The only problem is that I have no characteristic touch (with my hand) at all. It only detects the pen from the digitizer. I thought maybe they forgot to install the drivers or something, so I tried to install the drivers of contact from the Lenovo Web site (my product number is apparently 7448CTO which is not freaking multitouch to read on the forums). When I try to activate the Touch functions it tells me that it doesn't detect any touch screen also the Tablet has not yet come with the simpleTap software that had me really puzzled. Why Lenovo do this to me? I need it for the University and it took a long time to come. I really need those features not only the pen touch. Thank you Cal

  Hello everyone, it's all a big mistake, Lenovo had some mistakes with their Web site the day I ordered so they sent the digitizer pen only version by mistake. They were really nice to me when I called them up and they said that they would replace it with enhanced multitouch I ordered originally. Thanks Lenovo!

  Regarding your problem Sonoben, your missing 2-finger multitouch drivers, you can find it on the right Lenovo Web site here - http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73295

  Who should get your multitouch works better than ever, have fun with Windows 7 (I hope you Business or Ultimate because those who are very compressed friendly)

• Problems on Thinkpad X 200 to sleep!

  When I press Fn + F4, my X 200 may go to sleep normally, but I press 'Fn', X 200 is not out of the mode 'sleep', there is no display on the screen, but I can here the disk HARD works, the only way is by pressing the power button for 5 seconds to restart.  yesterday, everything is ok, but now there is something wrong with the x 200, I have nothing.

  My X 200 8400, 1 G DDR3, 160 G, Xp pro sp2,.

  Any ideas?

  Hi all!!!
  I sent my X 200 for the local support center thinkpad, they checked my x 200, the mainboard power management chip is broken, finally, I got a new x 200 Lenovo.
  I know what happened on my x 200 now, I remove power cord AC x 200 (200 x is power on) to check if the battery can operate normally, after that, the problem of sleep came out.
  Therefore, do not unplug the power wire with x 200 is power, no matter the x 200 were equipped with the battery!

• Help, please! Annoying problem with trackpoint x 200!

  I have an x 200 with Win XP Pro. I had a driver for trackpoint uptodate (4.72) and everything worked fine - I was able to change its value in the properties of the mouse (tab TrackPoint). After that the windows update, trackpoint I just crazy. There is still a 4.72 driver installed - it can be seen in the mouse properties, tab TrackPoint is lost so the trackpoint works with the standard slow speed that windows gives to him and there is no advanced settings this tab gives TrackPoint! I noticed that tp4serv.exe, which is supposed to start than the TrackPoint tab is started when windows starts, but the TrackPoint tab isn't as I believe. I discovered that to start tab TrackPoint that I have to manually click tp4serv.exe. It is so frustrating "couse I have simply no idea what to do - I tried to reinstall the driver (it crashes), tried to return to the previous version of the driver, I installed all the updates for the update of the system updates installed Windows - still the same." I also tried to tp4serv.exe in startup - no results... I noticed some messages on the internet from people with the same problem, but with no result... Do you have any suggestions what to do?

  EDIT: For any future reference - I managed to fix it: I first fully update windows and NET framework 4.0. That I got rid the trackpoint drivers on (had to remove in the boot menu first to uninstall it without freezing system)-result 4.72 driver has been replaced by the slow, ordinary windows without the Properties tab TrackPoint driver. I have that restarted, updated the driver in the properties of the mouse - I have not installed the latest driver Lenovo 4.72, welcomed bu7 Windows Update the driver to connect to windows update (4.64 driver). Then restarted and now everything works fine - I have my TrackPoint tab at the back of the mouse properties and can adjust the speed of the trackpoint once more!

  Thanks for posting your solution might help someone else.

• Video problem with Satellite X 200-25 G (PSPB9E)

  Hello

  I have this laptop about a year, and I have a problem with (real) Windows Vista, Windows XP (with the video driver change). Video driver is newest without problems, except one.

  I work with SolidWorks, and the problem is that in this product. You can see the problem, if you see this link http://www.youtube.com/watch?v=wi0gCJTJRrg. Parts only to disappear, even if it is a part, one of the wall of the part go missing (shows as mirror) I tested it with any kind of this product (SolidWorks 2008, 2009) Windows XP, Vista x 32, but every time the same thing.

  Probably the problem isn't in the product (SolidWorks), no doubt that it is not in the software, the driver and the OS (because I tested with two version of nvidia video driver authentic without no problem installing).
  I'm pretty sure that the problem is that video card is not compatible with this product, even the purpose of the video is for multimedia and gaming, which is so close with the work that I do.

  Can you give me some advice? Thanks in advance and sorry for my English skills

  I think that most people here after watching this video will not understand what is your problem.
  In my opinion you should visit the nearest maintainer authorized Toshiba, put your laptop on the desk and explain exactly what kind of problems you have.

  Otherway if you have problems with the third party software you should contact the manufacturer and ask for help. They have the best experience with the own product and I think they can help you about this.
  Computer laptop major manufacturer offers better built-in hardware driver and offer better graphics performance for habit each day working on this laptop model.

  Toshiba and other manufacturers of portable can not test thousands of products available and check the performance of the graphics card.
  Try contacting the support SolidWorks.

  Good luck.

• Problems with mounting frames

  Hello

  I have a timeline with 20 images and one image in each of them.

  
  I added a button to move an image for every time I click (mouse up) button.

  But when I reinforced with all frame of 20 for the first time and start a new "cycle" to frame 1, it seems like I get two advances (frames) instead of a sequel. And this speeds up to three three forwards instead of one on the "third round". Can someone please help me to see the logical problem?

  This is my code:

  () btn_forward.addEventListener
  MouseEvent.MOUSE_UP,
  {function(evt:MouseEvent):void}
  
  If (currentFrame is totalFrames)
  {
  trace (currentFrame);
  gotoAndStop (1);
  
  }
  on the other
  {
  trace (currentFrame);
  gotoAndStop (currentFrame + 1);
  }
  }
  );

  When I trace currentFrame on the first 'tour', I get this result:

  First click:

  1

  Second click:

  2

  Third click:

  3

  And so on...

  And when I trace currentFrame in next "round" (second) I get this result:

  First click:

  1

  2

  Second click:

  3

  4

  Third click:

  5

  6

  And so on...

  Any ideas?

  You must add your event listener exactly once.  When you add it a 2nd time, you have two headphones etc.. :

  var listenerAdded:Boolean

  {if(!listenerAdded)}

  listenerAdded = true;

  () btn_forward.addEventListener
  MouseEvent.MOUSE_UP,
  {function(evt:MouseEvent):void}
      
  If (currentFrame is totalFrames)
  {
  trace (currentFrame);
  gotoAndStop (1);
         
  }
  on the other
  {
  trace (currentFrame);
  gotoAndStop (currentFrame + 1);
  }
  }
  );

  }

• graphic problem with G530 4151/200

  Hello

  I'm french so excuse me if my English is not very well...

  My laptop is a lenovo G530

  Intel pentium dual core 2.16 GHz
  3 GB RAM DDR2
  NVIDIA Geforce 9300 M GS 256 MB dedicated.

  Latest driver for lenovo (October 2008)

  latest lenovo bios (April 2009)

  Sometimes, when I use my computer, my aero is not smooth. There are a few shifts. the animation is slow and are not smooth. If I open the control panel Nivida, the lag is gone, but it is s back a few minutes after. If I disable Powermizer, disepears lag. But without powermizer, the graphics card is overheating (60-68 ° C idle). So I put powermizer.

  But this shift are horrible. When I bought the computer, I do not have this delay, I this late since I spend from Windows 7 to Vista. My computer was purchased with Vista. I installed the update to the bios when I was on windows 7.

  I have tried many different drivers and it seems that the only way to stop this shift is to disable powermizer.

  Is there another solution? I do not have the backup of my bios previoux, where can I find my previous bios?

  Hope someone could help me...

  
  

• X 200 wireless problem - detects available networks, but cannot connect to them.

  Hi all

  I have a weird and annoying problem. My X 200 can detect wireless networks but refuses to connecto to them.

  It's a brand new computer that I just received.

  Some info:

  ThinkPad X 200 7454-2HU, running Vista x 64.

  Downloaded latest drivers installed, all using the autopilot to Lenovo download application.

  The driver has detected in the Device Manager is: Intel Wifi Link 5100 AGN.

  There is no problem with the wireless network (the other computers connect to it without any problems).

  I tried to cancel the option "n", leaving a "b/g", but it did not help.

  It is problematic that only one device in Device Manager, and it's "Controller of Bus SM" (cannot understand what it is and update windows or Lenovo update does not solve this problem).

  When I use "Intel ProSet/Wireless Tools" diagnose, I get:

  Test equipment: managed (wireless hardware is enabled)

  Pilotass. Driver is loaded. NET w5v64 Versio: 12.0.0.82

  Radio test: past. The radio is on.

  Scan Testass. There are 12 networks available to connect.

  Association test: failed. No partner.

  When I look at the statistics, it seems that the card receives bytes (nothing is sent).

  What do you think? Is it a hardware problem or software?

  No idea what can be done if it is a software problem?

  S.

  
  

• Satellite A205-S4777: are there problems of compatibility of the 320 HARD drive

  I am replacing my sata toshiba with a sata western digital with more memory than he.
  Can someone tell me if there are known compatibility problems.

  Toshiba 200 GB Sata Drive broke down and I am substituting a western digital 320 GB SATA

  I see that you have already improved HARD drive and 320 GB. So you could tell us if you've some HARD drive problems.
  BIOS recognizes the new HARD drive correctly?

  If you have already installed the new HARD drive and have been able to install the operating system, then I put t see serious reasons why new HARD drive shouldn't t work.

• Use cRIO module NI 9477 as relay to provide 24V input for Siemens S7 - 200 (CPU222)

  Dear all, could someone please confirm my use of NI 9477 as a relay works or not with the following details. It might be stupid question, but I do not know it is not displayed before and I can't really afford to burn my modules. I have two concerns, it's sink or connection to the source, another is the question of overcurrent.

  The Siemens S7-200 is used to control an engine not by sending impulses. I provide two digital signals to control the direction of rotation of the motor. So I propose to connect my NI 9477 as illustrated in the graphic below (left configuration) relay switch.

  According to the data sheet NI 9477 (attached), I suppose I should connect it as the right configuration for NI 9477 sinking module. However, power running electric in the control cabinet is wired as a configuration on the left. I don't know if I can connect to my NI 9477 or I need to set the polarity of power supply.

  

  Another concern would be the current that runs through NI 9477. He rated at 1 a and will be connected in series with only a power supply 24VDC input digital s7 - 200. I don't know if the current could be a problem as in s7-200 datasheet, it seems that the current is only 4mA. I'm reading this correctly? I've also attached the s7-200 Datasheet if you have time to varify that, please.

  

  Thanks in advance for any help.

  Kind regards

  Jinyu

  Personally, I would just change a 9476.  9477 module looks like it's better for negative logic (24V = FALSE, 0V = TRUE).

  And running for the PLC is practically in the noise of a digital signal of 24V, so I wouldn't worry on this subject.

• LaserJet Pro 200 M276NW color does not print more than once; application freezes

  Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

  The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

  To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

  My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

  Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

• x 200 HD playback

  Hey all,.

  I'm having a problem with my x 200 display HD content correctly. Here are the specs of my computer with some screenshots that show what I feel. Any help would be appreciated.

  Specifications of the computer:

  Lenovo x 200 (model: 7459GW2)

  • http://www-307.IBM.com/PC/support/site.WSS/quickPath.do?quickPathEntry=7459GW2

  Running Windows 7 Ultimate x 64

  • The version of the BIOS/Date: LENOVO 6DET67WW (3.17) 02/12/2010

  Mobile Intel 4 Series Express Chipset Family (Driver Version: 8.15.10.2226)

  Intel Core 2 Duo CPU P8600 @ 2.40 GHz

  Here is a link to the screen I see during playback of 720 p and 1080 p video content.

  • https://picasaweb.Google.com/LH/photo/pY3fmtimncG533M4GsDxpmA_lTP6cjBl05sm0-KYBZ4?feat=DirectLink

  Get the latest version of flash:- http://get.adobe.com/flashplayer/

  Exit your browser and install flash afterwards erase your browser cache, upload a HD video. Make a right click on the video once it starts-> settings-> disable hardware acceleration-> refresh your browser.

  

  

  I found this tip on the Google forum.

  Let us know the results.

• Windows 7 instalation / hardware problems

  Hello, I had a big problem in mounting windows 7 on my hard drive, watched a lot of guides and other people problems, nothing does not help me.

  First, when I turn on my computer Asus x54c laptop, I get message S.M.A.R.T status bad support and will replace F1 to continue. I'm editing windows via USB,

  I out usb 3.0 port and proceed to the instalation disturbances, anthing else do not work except Guest so I try diskpart several times.

  <>

  <>

  I get the error to check the I/o device error event log

  I put USB 2.0 port it take me just for instalation (no uograde or custom)

  I get the list all patritions sometimes, when I put back my hard drive and refreshment they present, 100 MB, 176 (primary) GB, 256 GB of uncloused space, all the time when I want to delete/format/news I get an error after 5-10 minutes, hard drive doing the litle clicking noise when I have my ear,

  Please HELP, is what can I do or just my hard drive is broken.

  http://www.Seagate.com/ca/en/support/downloads/item/SeaTools-win-master/