Problems with mounting frames

Similar Questions

• Problem with proxies frame rate

  Hey guys,.

  I love the new feature of proxy. But I am publishing excerpts from 4K and I discover that I am running into a few problems with proxy servers. I have some pictures of drone who were shot at 30 fps. I imported to the PP and changed to interpret them to 23.976 fps. I started to edit but I had some problems with reading, so I decided to create files of proxy for them. After I did and was finished, it was indeed pointing to proxy servers but they were playing their native rate of 30 frames per second and completely ignoring the fact that the original files were interpreted by PP to be replaying to 23.976 fps so of course everything has been thrown out of sync when editing in proxy mode. Is there a solution for this? I do this just?

  Sorry, interpret the film only is not currently supported for the proxies. Don't know if it will meet your needs, but you can try to leave the full resolution and Proxy clips at 30 FPS and insert Staples into a sequence of 23.976fps

• Problems with 24 frames per second in final cut Pro7

  Capture of the source - Canon 70 d - PAL - 1080/24 VPS

  Apple Pro Res-converted and imported in FCP7

  Clip fell in a sequence and choose 'change sequence with clip parameters.

  Sequence is then 23.98 FPS (NTSC friendly) rather than 24 p

  Ask yourself if this is the reason why the audio goes slightly out of sync with separate Zoom audio recording (never had this problem in the choice of the sizes of 25 or 50 on the camera)

  In addition, not a huge problem, but PAL DVDSP project sees the video as NTSC conversion to Mpeg Compressor 3 - only option to choose 25 fps to keep the project as PAL (that I have to keep the project as PAL)

  Also I was wondering if Final Cut X includes a setting sequence for 24 fps instead of 23.98

  24 fps straight up is very rare. Only used for feature films and cameras of late superior (such as RED).  24 p video works at 23.98.  The cameras of Canon should really default 23.98 during the filming of 24 p.  I can't even see a right setting 24 fps.

  What also confuses me is "PAL 24 fps." PAL is not 24 fps... 25 fps and 50 fps PAL frame rates. Watch raw H.264 launches... and the camera open in QT and see what the pace. He he 24 fps?  Even deposit directly into FCP and see what says the pace.  Just to see what the pace... FCP can show a lot. And as said FCP is the pace of the film converted?

• Problems with render (Prem 11 items)

  When I first import a clip in my project, the video quality is very good, but after I have make, he out craps, gets all grainy (the irony). How can I solve this problem?

  Sophie

  Part 1.

  Your Untitled.mp4 (turned)

  = AVCHD video compression

  Compression audio = AAC stereo

  Frame rate = 60 progressive frames per second

  File extension = .mp4

  Nominal value, it would seem that the project preset should be

  NTSC

  AVCHD

  AVCHD Lite 720 p 60

  In the first 11 elements, the program takes control over predefined setting the project given of some composite properties from the first video file dragged to the timeline. Sometimes it does, sometimes it doesn't. In no situation, it doesn't give you the project closet preset for you, but rather by default, its default value

  NTSC

  AVCHD

  Full HD 1080i30

  that does not correspond to properties of your video, including an interlaced 30 rate per second of the image instead of a 60 progressive frames per second an and including the size of the image of 1920 x 1080 instead of the size of your video 1280 x 720.  Why? It seems to be failing because it is having a problem with the frame rate. He is looking for a 59.94 to profile it and find 60 frames per second for your video.

  When boil us all this down to a few words. In this case, you must assign the project preset manually.

  First Elements ATR troubleshooting: PE11: accuracy of the project auto Preset setting (new project dialog box)

  When you do, you should be able to import your video into the project NTSC/AVCHD/AVCHD LITE 720 p 60 without the orange line on the content of the timeline despite this company of 59.94/60.

  Part 2

  When I import your Untitled.mp4 in a first elements 11 on Windows 7 64-bit project manually the value

  NTSC

  AVCHD

  AVCHD LITE 720 p 60

  the video quality seems good reading in the monitor of the area to change. And it doesn't have the ability to make this specific because the program its color line on the line of the capacity indicator tells me that I have the best possible overview of content (to get a better view). And, I found good quality reading display full screen also.

  Your Untitled.mp4 has a video bit rate (variable bitrate) of 5973 Kbps (kilobits per second in 5.973 Mbps. The size of the file is 41.0 MB).

  If you export your video Untitled.mp4

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 HD720p60

  You should have a file whose properties are comparable to the source. The reading of this export of AVCHD.mp4 in the drive on your computer should be good.

  If for export file size considerations are not a problem here, you can increase the export export video bitrate settings tab button/video forward of the preset looking for a superior quality export.

  But, when all was said and done, I couldn't see not "grainy" before or after the reading of the Untitled.mp4 in the monitor area Edit. Export of this H.264.mp4 at no time looked grainy on playback in QuickTime player.

  Please review and consider. The double project preset controls, in particular the "Force selected setting on this project' checkbox in the dialog box new project when you perform the manual setting of the preset project. Please let me know what additional tests you need for your samples.

  Looking forward to your results.

  Thank you.

  RTA

• problem with JInternalFrame?

  Hi I have a problem with jinternal frame.
  
  I added get to the JPAnel and this scrollpane to frame internal, but when the jinternal frame is open vertical and horizantal scrolls do not appear.
  
  
  my code is as follows:-
  
  
  Inner code of the frame: -.

       @Override
       public void menuSelected(MenuEvent arg0) {          
            JInternalFrame addShopIf=new JInternalFrame("Add Shop");
            Container ctr=addShopIf.getContentPane();
            ctr.setLayout(new BorderLayout());
            MainPanel mainPanel=new MainPanel();
            JScrollPane scroll=new JScrollPane(mainPanel);
            ctr.add(scroll,BorderLayout.CENTER);
            desktop.add(addShopIf,1);          
            addShopIf.setClosable(true);
            addShopIf.setMaximizable(true);
            addShopIf.setResizable(true);
            addShopIf.setIconifiable(true); 
            try { 
                 addShopIf.setSelected(true); 
             } catch (java.beans.PropertyVetoException e2) { 
               } 
            addShopIf.setSize(400, 400);
            addShopIf.setVisible(true);
            
       }

  Published by: Myriam March 19, 2012 11:41
  
  Published by: Myriam March 19, 2012 11:45

  By default, the scroll bars are visible only when necessary, that is, the content of the provided element is larger than the size of itself. Have you tried to resize the element to display the scroll bars appear?

• Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

  Hi all

  Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

  Here are the specs:

  1 Macbook Air 11.5 "running on El Capitan (10.11.1)

  2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

  Before the accident yesterday, it was working OK.

  Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

  I can assemble and disassemble a USB stick very well.

  Any help would be appreciated.

  Thank you!

  Maybe you can explain a little better.

  I would like to make some general comments before having your replay.

  It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

  For TM, the rule is that the drive is about 3 times the size of the boot disk.

  Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

  I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

  Have another drive formatted NTFS for Windows.

• Problem with the display of a video frame in Windows Media Player 11 on Vista

  Hello

  I am having some problems with the Windows Media Player 11 on Vista. On my XP machine, when I discovered a video frame by frame, it works perfectly back and forth. However when I try to play the same video on my Vista machine, the button to the front of the image works perfectly fine but the previous image button takes video from 5 to 10 frames. Since I use my machine Vista more and need this feature often enough, it gets boring very quickly. It is a drive problem (since the same player works great under XP with the same video) and can be solved with a patch or some sort?

  Thank you

  Hello Helloaamir,

  Thank you for posting.  I understand the problem you are having, but I do not understand why in the need for these features.  Depending on what you're trying to do, may be able to use Movie Maker instead of it you also has characteristics of the image by image.  If you could include that you are using this feature, because I can give you a good alternative or possible difficulty of deliverance.

  Looking forward to help you any further. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

  Vista Home premium

  64 bit

  HP pavilion dv4-1220us

  It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

  RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

  DOWN MY BIOS AND THE ICON IS STILL THERE.

  THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

  Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

  I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

  1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

  2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

  At the moment I'd hide so I does not uninstall my cd/dvd drive.

  Do I need another hard drive?

  Is this something with the Bios?

  Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

  http://www.GearSoftware.com/support/drivers.php

  http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

  http://support.Apple.com/kb/TS2308

  http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

  Hi Mamalasting,

  I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

  Reference:

  http://www.HP.com/#support

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the entire thing on

  I am new to use the forums.  How to start a discussion?  The ICO next which is grayed out.

  I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the whole thing and put it in a new, m not corrupted project?

  Hello and welcome.

  I feel for you after reading your story, however, it that are supposed to do? It is a forum for Dreamweaver and to my knowledge, Dreamweaver has no functionality called the chronology.

  Could you please explain the problem so that we can understand?

• asynchronousExportFile problem with windows mounted volumes

  Hello

  I see a very strange problem with the functions asynchronousExportFile and doc.exportFile from Indesign. They work perfectly in most cases, but if the user is on a Mac, and has a Windows mounted volume, the function of asynchronousExportFile level Indesign appears to try to add "/ Volumes" the path to store the file, even if it doesn't have been ordered to use this path.

  Here is the code snippet in which I am referring to.

  
  var outFile: file = File.documentsDirectory;

  outFile = outFile.resolvePath ("MyTmpFilePath");

  outFile.createDirectory ();

  {if (outfile. Exists)}

  outFile = outFile.resolvePath (outFile.nativePath + File.separator + fileName);

  var task: BackgroundTask = doc.asynchronousExportFile(ExportFormat.PDF_TYPE,outFile,false);

  task.waitForTask ();

  }

  This is the error I get

  () CSAWLib.CSLogger CSHostObject.hostCall failed on asynchronousExportFile - 1952403524,.

  /Users/Jess/documents/MyTmpFilePath/1-1.PDF with msg: cannot find the file ' / Volumes/Users/jess/Documents/MyTmpFilePath/1-1.pdf '.

  As you can see /Users/jess/Documents/MyTmpFilePath/1-1.pdf is the correct path, I feed the function, but somewhere in the code adobe adds "/ Volumes ' since I was" / Volumes/users "as a mounted directory. It should be not to convert the path to the "/ Volumes/Users/jess/Documents/MyTmpFilePath/1-1.pdf". Is a path not existing since support for Windows is not user 'jess'.
  

  If I remove the windows volume everthing works again. As a test I have even disassembled all volumes and went into my directory of Volumes and created a directory named "/ Volumes/users/abc", which causes the problem to appear again immediately. We tried this on several machines, and the behavior is the same. I also tried to deceive the function using a different directory by using of "... /.. '. "/" etc. does not.

  I also noticed that by the time I get out the "/ users" part of the way, everything works fine. Unfortunately this isn't an option because many users have privileges to write files outside of their user sandbox.

  Please, I struggled with this problem for days now and searched all forums. Any light that someone might throw on this topic would be very useful.

  Thank you

  Use the ExtendScript instead of ActionScript.

• Import problems with frame rates for formats HDV 24 p - vs - 29.97 FPS

  Sorry if this has been discussed before but I couldn't find the answer.

  I use a camera Sony HDR-FX1000 with an external recorder card compact flash (Sony also) and I chose 1080i 24 p in the camera to shoot in.  When I pull my card compact .m2t files flash in my first Adobe Elements 3.0 data of the file shows that the frame rate is 29.97 FPS.

  Why Prime Elements 3.0 display 29.97 FPS when I chose 24 p in the camcorder?

  What should spec 24 p look like in elements of Prime Minister? As 24.0 fps?

  Interesting, so even though I'm moving to PrPRO I still have a problem with editing in 24 p?

  Lol PrPro offers what is called a Preset Desktop, which allows the user to set almost all the parameters of the sequence/project, match the pictures. PrE has a limited set of Presets for the most popular attributes only, and is not yet a Desktop Preset with adjustable attributes.

  This ARTICLE could be useful. Jim Simon and Dan Isaacs discuss Film Look, 24 p is often part.

  Good luck

  Hunt

• FM7.2: Problems with frame anchored in the rotated table cell

  Hello O Experts,

  I am facing a nasty problem with FrameMaker 7.2 for Windows with frames embedded in rotated table cells. I was wondering if any of you have seen this problem and know how to solve.

  The problem is reproduced as follows:

  1 create a table.

  2. Add a small frame anchored "the point insertion" inside one of the cells.

  3. Add a line of text to the anchored frame.

  4 turn the cell by 90 degrees clockwise or counterclockwise.

  Up to step 3, the anchored frame and the line of text behave as expected. Can I choose both the frame and the text line, move and resize. In all cases, they are displayed correctly.

  After step 4, the following occurs:

  • The content of the anchored image appear or is badly distorted.
  • Is no longer, I can select or resize the anchored frame (if I try, FM acts irregularly and wildly moves the outline around the page).
  • I can choose is no longer the line of text in the frame.

  I enclose a file FM (created using integrated model "portrait" of FM) sample that illustrates the problem.

  If someone knows this problem and I hope a solution, I would greatly appreciate it if you'd share. Thank you very much!

  Michael,

  If you turn just the anchored frame itself and not the cell (content) then everything behaves. If you have lots of content for the anchored frame, then place a block of text in the anchored frame, use a suitable paratag in text and only turn the framework anchored (all content will follow along then).

• HP tm2-1010ea problem with wifi

  all start with replacing the battery, then replacing the ssd

  format / new drivers/windows /.

  and now problems with wifi drops and loose conectivity light is on and after a 30 min close by him self and no connection is any program to test if I need to replace it or?

  OK solution

  Download windows iso version that your computer link is originally (be careful)

  Download clone drive (feeware)

  mount the iso (diferent external drive)

  Start windows to install then start upgrading and connect on the net with an ethernet cable to find the latest files for windows start

  wait...

  a few reboots approx. 1 hour

  for my problem was frame 4.5 has been corrupted and repair windows

• MacBook Pro 17 "middle 2010 2, 66 GHz Core i7. Problems with CPU and memory.

  EtreCheck version: 3.0.5 (309)

  Report generated 2016-09-26 08:52:41

  Download EtreCheck from https://etrecheck.com

  Time 02:19

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: No problem - just check

  Hardware Information: ⓘ

  MacBook Pro (17-inch, mid 2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro6, 1

  1 2.66 GHz Intel Core i7 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 167

  Video information: ⓘ

  Intel HD Graphics

  NVIDIA GeForce GT 330M - VRAM: 512 MB

  Color LCD 1920 x 1200

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  SAMSUNG SSD 840 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  SSD of Macintosh (disk2) /: 998,97 (Go 117,08 free)

  Storage of carrots: disk0s2 999.35 GB Online

  SAMSUNG SSD 850 EVO 500 GB disk1: (500,11 GB) (Solid State - TRIM: No.)

  EFI (disk1s1) < not mounted >: 210 MB

  SSD500GB (disk1s2) / Volumes/SSD500GB: 499,76 GB (260 MB free)

  USB information: ⓘ

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com. AppBox.AppBox.plist

  ~/Library/application support/AppPolicy/AppBox - i-c 748931 - isn 6A4BB6B7-28E4-416D-BE5C-0AE3D10382ED

  ~/Library/Safari/extensions/SlickSavings.safariextz

  2 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/VirtualBox

  [loading] org.virtualbox.kext.VBoxDrv (5.1.6 - 2016-09-19) [Support]

  [loading] org.virtualbox.kext.VBoxNetAdp (5.1.6 - 2016-09-19) [Support]

  [loading] org.virtualbox.kext.VBoxNetFlt (5.1.6 - 2016-09-19) [Support]

  [loading] org.virtualbox.kext.VBoxUSB (5.1.6 - 2016-09-19) [Support]

  / System/Library/Extensions

  com.olympus.DSSBlockCommandsDevice [no charge] (2.0.0 - 2016-09-13) [Support]

  Launch system officers: ⓘ

  [no charge] 8 tasks of Apple

  tasks of Apple 155 [loading]

  [running] Apple 76 jobs

  Launch system demons: ⓘ

  [no charge] 45 Apple jobs

  [loading] 158 jobs Apple

  Apple tasks 87 [performance]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loaded] org.virtualbox.startup.plist (2016-09-19) [Support]

  User launch officers: ⓘ

  com.appbox.AppBox.plist [running] (2016-09-11) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

  com.spotify.webhelper.plist [running] (2016-09-18) [Support]

  [loaded] org.virtualbox.vboxwebsrv.plist (2016-09-19) [Support]

  Items in user login: ⓘ

  Mac Fan Control application (/ Applications/Mac Fan Control.app)

  iTunesHelper application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Plug-ins Internet: ⓘ

  Silverlight: 5.1.50709.0 - SDK 10.6 (2016-09-22) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  QuickTime Plugin: 7.7.3 (2016-08-12)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-13) [Support]

  Default browser: 601 - SDK 10.11 (2016-08-12)

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-05-22)

  QuickBrowse - Catalin Andrei Vasiliu - http://www.unionsoftwareonline.com (2016-04-06)

  Slick savings (2015-10-03)

  EverNote Web Clipper - Evernote Corp. - http://evernote.com (2016-07-23)

  3rd party preference panes: ⓘ

  Flash Player (2016-08-30) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh SSD: Disc size: 998,97 GB disc used: 881,89 GB

  Destinations:

  LaCie 2 TB TC [Local]

  Total size: 2.00 TB

  Total number of backups: 69

  An older backup: 02/09/16 10:58

  Last backup: 22/09/16 21:02

  Backup disk size: too small

  Backup TB 2.00 size < (disc 881,89 GB X 3)

  Top of page process CPU: ⓘ

  70% callservicesd

  57% findNames

  20% com.apple.WebKit.WebContent (26)

  accountsd 18%

  com.apple.AddressBook.ContactsAccountsService 17%

  Top of page process of memory: ⓘ

  2.41 GB com.apple.WebKit.WebContent (26)

  649 MB kernel_task

  Safari of 549 MB

  Mdworker (15) 238 MB

  Dropbox 156MO

  Virtual memory information: ⓘ

  1.62 Go free RAM

  6.37 GB used RAM (2.63 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  26 September 2016, 08:49:12 self test - passed

  September 2, 2016, 20:53:40 /Library/Logs/DiagnosticReports/Kernel_2016-09-02-205340_[redacted].panic [details]

  Files deleted by EtreCheck: ⓘ

  On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com. LiveShoppers.agent.plist

  On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com. Software - Updater.agent.plist

  On 26 September 2016, 08:39:25 - ~/Library/LaunchAgents/com.unionsoftwareonline.AppMonitor.plist

  On 26 September 2016, 08:39:42 - / Library/LaunchAgents / com LiveShoppers.agent.plist

  On 26 September 2016, 08:39:42 - Library/LaunchAgents/com. Software - Updater.agent.plist

  26 September 2016, 08:39:42 - ~/Library/Safari/Extensions/Ebay Shopping Assistant.safariextz

  On 26 September 2016, 08:39:42 - ~/Library/Safari/Extensions/Searchme.safariextz

  What are the symptoms you experience that lead you to believe that there are problems with the CPU and the RAM (or is it storage?)?

  Ciao.