Problem of overloading the system after the update

Similar Questions

• I have problems to install the update.

  I have problems to install the update with the supplied serial number - he asks me a previous version serial number which I did not.

  Please check: https://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

• Problems with Vista OS SP2 after automatic updates: using OneCare; application of integrated keylogger HP CPU "HP SDP" made by IBM in Durham, North Carolina (?); corrupted Samsung print driver downloaded from the website of the company

  Entered possible hacker:

  1. techie OneCare WINS access - probably not unauthorized and do not believe it causes always provided a quality service, but they have had access in the past.

  2 HP technicians - have had access to my computer once - did a good job with computer crash (not sure cause), but tried to sell me more HP products when I have no money...

  3. after the technicians HP did good job with crash, started to have pop-ups keep HP application that appeared as an add-on that works without permissions on my computer. Google the name of the HP SDP application > recovered information said program is IBM in North Carolina. Called them. Nobody gives any information on the program until I got ahold of a person who gave me the phone to techie Dept. It took all day. Not have not yet contacted technology because they have closed before I could call.

  4. called HP to inquire about the search info from HP SDP. on his goal? HP said he works as a keylogger you sell stuff. But what was weird is after the system crashed and repaired, there was one day that he has opened three times in ten minutes! The behavior of the application has changed after my OS has been repaired. Then after that I indicated HP where I found information on this program, the program disappear from the list of "run without permissions" in internet options explore > manage add-ons > run without the permissions list

  5. one day, I'm working on a word document, and the printer stops abruptly, impression. No amount of turn, or by clicking 'Cancel' will get doc from the printer queue. MS literature said this could be a security issue. The printer says "printing of documents", but no printing at my end.

  This problem is compounded when I delete browsing history and try to refresh the internet Explorer. That activity seems to take pieces of the program Samsung printer with it, even if I had excellent results in the past with Samsung printers and their downloads, and I never had the damaged printer driver to exercise this activity in the past.

  If I didn't have a short term in the Court of appeal in a week, I would say it's a question of OS, or program problem, but it's as if something falls down as soon as another issue is fixed and the unusual behavior of the computer, more timing and the purpose of the brief to me 90% sure that this is a pirate or a virus the surplus of the Samsung driver deleted pieces being left on my machine after uninstall.

  Dear Karena R,.

  Thanks a lot for your excellent advice. The Techies MS OneCare fixed the popup of HP before I read your message. (I was remiss to check my email...). I'll follow the instructions you sent me and am running the OneCare security right now, online scanner that I already know an excellent and effective tool because it has repaired my MS operating system and programs after that I accidentally deleted parts of the operating system by removing a .dll file, I need or such a thing! I also wanted to thank you for the information about the object of the HP SDP pop-up window. I saved your instructions on how to remove this case, the pop up appears again. One thing I noticed is that, after removal, some keys on my keyboard don't work, and I've read that other HP users encounter the same problem with the keys on the keyboard. The keys that seem to be affected are the keys that automatically open and close the door of the CD burner. Not a problem, because it is another way to open and close the drawer. It's one that HP must improve. In regards to your advice on the printer driver you have been 'right on' new! I reinstalled the driver using my own CD (not the latest driver, but one that works!) I think that the problem with the update of the Samsung driver that I downloaded from the Web site doesn't have some kind of problem. It is very unusual for a driver to Samsung, because I got excellent results with printers Samsung and free updates downloaded from their Web site. The first Samsung printer I had worked so well, for so long as the small rubber roller that takes the paper and it feeds through the printer wore out until the printer is, literally in a 100,000 pages printed after that I bought for about $80.00 dollars! So, I went out and bought another one, and that's what I use now. The printer works fine now, except for some reason, the icon in my taskbar notification area, allow to check the printer the status of jobs, cancel or repeat printing as before. Once. from time to time, a job stuck in the queue for the printer and will not erase unless I unplug the printer from the central unit. Nor will it print. But since I reinstalled the driver, this has happened only once. With the downloaded update, it happened all the time. It is possible that my OS is misconfigured, but I started to run the routine tune ups and analyses using OneCare and unless I used to defragment. I learned that the defragmentation of the hard disk too can cause problems also. The last thing is, I think that sometimes, tiny files needed to run my OS and files other programs can be sent to my temporary folder by accident. MS still once, All_Knowing computer, somehow recognizes the files I need and pushes me to ignore them, but perhaps it does not work for non-Microsoft like Adobe programs. I will use the link in your message to run the fix with the printer driver just to see if it works. If it is not the case, I can always reinstall the driver with my CD that came with the printer. Thanks for the excellent and informative tips and forgive me if I do not respond sooner!

  Sincerely,

  E-mail address is removed from the privacy *.

• Problem of "Ask the update" of Firefox?

  Hey, recently my firefox had a strange problem, when I click on help and "On Firefox" to see if I need to apply the updates I always see the button 'Apply update', naturally, I clicked it, Firefox resets but the button remains when I check again instead of saying "Firefox is updated", when I check the site of Firefox , it says my version is up to date, I have tried to uninstall firefox and put it back, even once, I tried to install firefox while having already installed, and the problem remains, however, if I run firefox as administrator, he said his day, is this a problem of update or I'm just being too paranoid?

  Software update does not properly

  • http://KB.mozillazine.org/Software_Update#Software_Update_not_working_properly

  Check and tell if its working.

• Having problems with all the updates - error 1601 - windows install failed - what should I do?

  All of the updates fail - net framework for microsoft office updates.  All of them refer to the windows installer.  If it is corrupted, how do I fix.  At the moment I'm hiding updates, so that they are not repeatedly appear in my taskbar.  I had this problem since May.

  ... I had this problem since May.

  Vista Service Pack 2 (SP2) is installed?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Unexplained computer behavior may be caused by deceptive software
  http://support.Microsoft.com/kb/827315

  There is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft is sponsoring free, online (third) for issues: http://supportservices.microsoft.com/support/services/virus_malware_removal

• problem to install the update

  Today, my pc has been blocked several times, eight problems were found.

  Many programs do not work and the solution proposed by microsoft has been updated from my window.

  There was already a 8 * 64 bit window available on my pc and ready to install.

  I try to do 2 times, but it was not successful.

  Has been an error with code 80073712.

  What can I do to fix this?

  Can someone help me please

  See if temporarily disable installed antivirus programs & again install the update something change.

• HP Envy 15 t-j100: no operating system after BIOS update

  After many failures of start-up (see messages in the forum to Boot), I was advised to update the drivers, etc. Did so, using the HP Wizard, one of the system BIOS updates. It's the last thing I did on this machine, I use now a laptop borrowed. The update of the BIOS seemed to go well, installed, then checked her restarted. But it does not re - start. "No operating system found... "Thank you very much HP.

  I told Win 7 Pro, when I ordered this machine instead of the 8 win pathetic, if I do not want to restore it to factory settings. Now, how can I get out of this hole?

  David

  Re-enter the BIOS and verify that Legacy boot is enabled-Secure boot disabled. If you need to change it don't forget to save & exit. When you restart for the first time after having turned startup security turned off, pay attention to the small notice indicating that you must confirm save this setting by entering a PIN shown + enter, otherwise these new settings in the BIOS are not saved.

• "Error loading operating system" after windows update

  I have an ASUS EeePc netbook model: 1005PEB. Last night before going to bed, I stopped the netbook and it has begun to install and configure windows was last updated. I left on the office do its thing and went to bed. This morning, I got the netbook and it went out of the car and it turned on while I was about to leave the House (before ask you, no I ' was not flying). He started installing all the updates that it had installed the night before. It has gotten to the point where it installed the last element and hung up there. I leave a this screen for 45 minutes and nothing has changed. I went against my better judgment and off the netbook. When I went immediately to turn it back on all I get is "error loading operating system". I tried to use F8 to try to start it in safe mode and I can always access the BIOS. How do I get this service still? I don't have really any data here, I'm too preoccupied. Thanks for any help anyone can offer.

  Hi argyle_83,

  Were you able to boot into safe mode?

  This problem can occur if your computer's BIOS does not correctly manage or support the capacity of the hard disk on which you install Windows 7. You can try the steps below to resolve this issue.

  Method 1: Obtain the latest BIOS updates

  WARNING: This article contains steps that may involve changing your BIOS or parameters of semiconductor (CMOS) to complementary metal oxide, or that may require you to make physical changes to your computer hardware. Incorrect changes to the BIOS of your computer may cause serious problems. Microsoft cannot guarantee that problems resulting from changes to your BIOS can be solved.

  Your first step to solve the problem of the error loading operating system should be updated to your computer BIOS.

  Contact the computer manufacturer to find out how to obtain and install the latest available for the computer BIOS update.

  Find information of BIOS on your Netbook from this link.
   
  http://support.ASUS.com/download/download.aspx

  Here are answers to some common questions on the basis of input/output system (BIOS).

  BIOS: Frequently asked questions

  Method 2: Run the Startup Repair

   

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting.

  Refer to this article for more details.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems to install the updated release of Firefox on the system.

  I am running Firefox 33.1 & I get a message saying "update failed."

  When I try to download the latest version, it crashes (for as long as 8 to 10 hours) and does nothing.

  A failure of the system, I could get my favorites (from a backup I had (before the crash the system.))

  Do you still have accidents involving this file in the blocked thread?

  Were you able to download the full installer of Firefox and upgrade to the current version?

  • https://www.Mozilla.org/en-us/Firefox/all/

• Windows Vista has problems to install the update for Office home and Student 2007

  I can't widow vista to install an update for Microsoft office home and Student 2007. I have to uninstall and reinstall the program from the cd that came with my pc and that has not worked. Can you tell me why I have a problem with it.

  I can't widow vista to install an update for Microsoft office home and Student 2007. I have to uninstall and reinstall the program from the cd that came with my pc and that has not worked. Can you tell me why I have a problem with it.

  Hey bluefeather1964

  It comes to the installation of vista operating system instance

  You'll have to repost in the windows update forum

  and tell them everything error codes and the KB numbers when repost you it

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  This is the normal error code 646, that you get with the office updates

  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller

• I have problems to install the updates & cannot get rid of a text called events Reporting document

  I have problems installing updates-i followed the repair according to the windows help - tell that to completely empty the software distribution file. However I can't get rid of a Word document called reporting events. When I go to deleate it it tells me that cannot perform this action as its already open in an another help file?

  Hello

  Yes, try to do a restore system from safe mode and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• Updated the first CC 2015 I get error U44M1I210. How can I resolve this problem and install the update?

  I get error U44M1I210 when any new first CC 2015. I uninstalled and tried reinstalling, but the problem persists. You have to solve this problem immediately.

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• With the help of Photoshop CS6 on Yosemite with a Cintiqt and get crashes when I go to save. A way to solve this problem? Only the updates seem to come from CC and I am the last of people loading discs.

  Well, my last computer was destroyed when the son of a friend seeps water so I am rocking a brand new Macbook Pro. Unfortunately, this means that I have to use Yosemite. I am a cartoonist and I draw in Photoshop using a Cintiq. I indeed get bugs like not being able to use some keyboard shortcuts, or by using the zoom or the lasso. But the important thing is that Photoshop crashes when I go to save the work for the first time. No idea how to solve this problem?

  Install the MacOS 10.10.1 update to fix the crash bugs generalized in the open and save dialog boxes.

  And make sure you have the plugin WhiteWindowWorkaround installed in CS6 (no not necessary in 2014 CC) to work around some of the well-known MacOS issues.

• Problem started with the update KB979906 and error 0x66a code.

  Completed all the missions entrusted by Lily Wang.

  Error code: 0x66A
  Need to reinstall the Framework

  Use as a guide

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  So have you tried to reinstall .NET framework as recommended precedent?

  In this order-

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  TaurArian [MVP] 2005-2011 - Update Services

• Major problems after the update to 10.11.2

  Hello

  I have a 2009 MacBook pro environment. I'vewalkways updated to the latest osx and have never had any problems. Since the update to El Capitan my computer worked really slow. I deleted all the old files, uninstalled I don't use and move all the files on a hard drive current of the program. With the first update to El Capitan, it would take 10 minutes to activate and load up, slow but manageable.

  Since the 10.11.2, update I have been practically impossible to use my computer at all. Now, it takes 25 minutes to activate and load up. Once its loading I can barely click an icon before her color of the wheels. It will charge finally something at the end of 5 minutes, but basically the computer is useless.

  IM wondering if anyone else has had similar with El Capitan and the problems that people would be advice to me. I plan to downgrade to Yosemite, as I had no problem then, but I've never done anything like this before, and I'm worried it will more mess my computer and then I will have no computer at all? I need to create a USB key with Yosemite on and then erase the Mac HD before reinstalling with Yosemite. I am naturally cautious but want to do what's best for my computer working again.

  Or would it be best to reinstall El Capitan and hope this sorts the problem?

  Thanks in advance

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.