Problem of satellite A60 Ati2dvag (display driver)

Similar Questions

• Satellite Pro A60: ati2dvag display driver does not properly

  Help... I know very little about the computer and need to know what, how and where I can get a solution to this problem. It happens more often now, will damage the screen and I have to restart only to make it happen. I tried to down load bios 1.90 and hope that it works as some similar ports have said, but what can I do else? any help from anyone would be great

  [Edited by: admin August 19 05 23:28]

  Hello

  Well, you can try to restore your system. If the problem remains the best way is to contact the Toshiba ASP. You can find the right partner on this site:

  http://EU.computers.Toshiba-Europe.com

  Good bye

• Satellite C660 Intel Display Driver 8.15.10.2353 download Stop to 50%

  I wanted to download Satellite C660 Intel Display Driver 8.15.10.2353 but it always stop at 40% or 50% Toshiba cant even take care of its download pages? Anyway did someone knows how to get it or maybe change laptop or something like that to another brand @_ @.

  Download link do not work for 64 bit

  http://www.Toshiba.co.UK/innovation/...untry=8&page=2

  Hello

  I tested your link and I downloaded the driver successfully.
  

• Satellite Pro A60: Blue screen - ATI2DVAG display driver. DLL in endless loop

  Hello
  Laptop is a Toshiba Satellite Pro A60 with ATI Mobility Radeon 7000 IGP video card, running Windows XP Professional and SP 2.
  During the start in most cases systems hang up with blue screen.

  I installed the latest drivers from http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK (Version dated 6.14.10.6430 Date 09/03/2004) but the problem continues. After second - last third - it reboot now works.
  The blue screen says (translated from German):
  "Component that probably caused the problem: ati2dvag.dll; the device driver is in an infinite loop; Subsequently the unit does not work, or the device driver is not program the equipment in the right way. STOP 0X000000EA. A dump was created.

  Please HELP - THANKS in advance!
  Best regards
  Frank

  Hello

  I studied a bit on the Toshiba site and found this interesting paper Toshiba on the error message Satellite A60 and blue screen on startup.
  http://support.toshiba-tro.de/KB0/TSB5300X7000MR01.htm

  This document describes how to upgrade the BIOS. The update of the BIOS should help solve this problem. Take a peek inside.
  Please post if you have solved the problem

• Equium A60-155 display driver problem

  I have a problem with my laptop when I have a USB hard dive or a CD/DVD, my display driver crashes

  The display driver is the latest version (ati mobility radeon 7000 igp - 6.14.10.6430

  all ideas

  Hello

  Well, it's not easy to tell why you laptop got this dysfunction. As a first step, you can try to update the BIOS.
  As far as I know the latest version is 1.9

  Good bye

• Satellite L300-2This - display driver problem

  I had daily problems with a display driver. I've looked everywhere for a newer version, but it seems that he is no. I could find only 6.14.10.4953 version and it is one I have already.
  BTW the message I get on screen BSD is "igxprd32 driver has entered a loop" or something like that. In any case it is super annoying not not to be able to find a driver for a less expensive than a portable years TOSHIBA!

  Thank you

  I think problem is not the driver itself. It must be something else that has a negative influence on the graphic feature. I put t know what operating system you use but install original Toshiba recovery image and I'm 100% sure that everything will work perfectly.

  Who knows what you have installed on your laptop and what are your activities.

  A few months ago, I installed Win7 32 bit on friends L300 and it works perfectly. Her HARD drive was dead, and we've updated the HARD drive and did clean install of Win7. Until now he didn't notice any problem with graphics or features in general.

• Satellite T130-02F - display driver error

  Hello

  I just bought the Satellite T130-02F and after choosing 32-bit operating system, I had the power to recharge the battery and then started to get 'to display driver errors"where the screen black flash and then flash back on. I checked Device Manager and Driver Details, the reader is up to date and as far as I can see is the suitable driver. I searched websites to see if there are other drivers out there ar, but its update.

  I have nothing more have not installed on the computer again and find that I get the error more regularly on the farm rather than power, that concerns me. The computer is less than 24 hours old.
  Any advice?

  Mobile Intel (R) display firmware.
  Windows 7 32-bit is installed.

  Hello

  In your case I would try to reinstall the display driver. You can find the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that, make sure that the latest version of the BIOS is installed. You can download the Toshiba site too.

  If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and should be checked for professional people.

  Welcome them

• Toshiba Satellite Pro 2100 - display driver resolution - help!

  My laptop screen is 15 inches and resolution 1024 x 768. He worked always good. Until I installed Windows XP SRV 2 once again. Now, the screen only works with 969 x 768 pixels. Without the ability to use the whole poster resolution. So I downloaded and installed the toshiba display driver. But still the same problem. (Black band on the right side) part of the display resolution remains unused and remains black.

  I tried everything in the display settings of display resolution, but the law remains black strip unused

  This unused black band is om the right side of the screen.
  The rest of the computer laptop good workt without problem

  A frend of mine has the same problem with a toshiba Satellite Pro 6100. After insalling Windows XP and the appropriate driver, the screen leaves a band black and unused.

  Can someone help me please?
  Thanks in advance.

  Hello

  Can you please check under display properties > settings > advanced > monitor, is there possibility to activate the option Hide modes that this monitor cannot display.

  If you want, save your data and reinstall OS with recovery CD. Check if your monitor is working properly and there is black band again.
  I ve done the installation of SP2 several times without any problem. It is not a simple to determine what can be wrong with it.

  If you reinstall the operating system and there is no black band again, please let me know. I am very interested about your problem.

  Good bye

• Satellite L500 - 152 Display driver Sims3 plus

  Hello. I use this thing = [Satellite L500-152 | http://nordic.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?LNG=18&service=ND#tab3;] .
  And it was fine, until I came out and me Sims3 and Sims3 World Adventures, after installing both (+ in order correct ofc +), when I tried to start them up, I can not for the game Launcher, because an error message blocks my way...
  "* There was an error during startup. "Check the log for details."
  No info for don't nabs like me, about the location journal. And when you press the button available only here, the frozen Launcher naturally also closes its doors with her.

  So I checked google and found that people who have had the same problem, just changed the display driver to one that is supported by the game, I discovered that mine was not, I have * "ATI Mobility Radeon HD 4500 Series."

  _Sims3 taken in charge the radeon drivers are: _
  Series ATI Radeon 9500, 9600, 9800, X 300, X 600, X 700, X 800, X 850, X 1300, X 1600, X 1800, X 1900, X 1950, 2400, 2600, 2900, 3450, 3650, 3850, 3870, 4850, 4870, Â Intel® Graphics Media Accelerator (GMA) GMA series 3 Series 4 GMA.

  If someone could help me, by discovering what driver of the foregoing (as appropriate), will work on this laptop and tell me where to download it, I would be very very very happy :)

  Those who changed the driver perhaps no laptop and desktop computers. There is a big difference.
  Support drivers is much better for desktop computers.

  Problem is that the drivers for laptops are slightly adapted and designed for optimal graphic operations.
  I'm afraid that this with updating the graphics driver will be not so easy.
  It is always recommended to use the drivers provided by the manufacturer of the laptop. With the help of some third part and untested graphics card driver may be forced to run on a maximum and there is risk of damage or surprise. So be careful with this stuff.

• Problem with Half Life 2 display driver

  Please can someone help me?
  I just installed the game (Half Life 2)
  whenever I play the game everything is fine until I have quit the game, my laptop fell down and restarts.
  the error report I send said that there is a problem with my display driver.
  before I start the game, I get a message that says that my display driver is outdated and that I could get in trouble, because my computer is a laptop, (Nvidia) do not carry the Toshiba drivers.
  I've been on the Toshiba site and they have no display driver newer than the one I use now.
  Please could someone suggest something I could try.
  and Toshiba will bring a driver updated in the near future? This really seems a pity that the game seems to work verywell accept for this problem that exists.
  My laptop is a Toshiba Satellite P10 with a Nvidia G-FORCE FX GO5200 card inside.
  Your M Lovett.

  I have the same card and I get the same message, however without crashing.

  you have installed all the updates/fixes you can to ACE this may solve the problem.

  What about drivers who are the cause of the accident, one of my friends had a lot of problems with regularize them and crashing and it was running the game on a custom platform so maybe it's not that the real fault.

  [Edited by: admin 30 May 05 07:13]

• Satellite A660-15t - display driver does not

  Hi all

  I have a SATELLITE A660-15t LOAN while my A660 11 M is being repaired, this morning 3 times I got a message that says - Display driver Nvidia Windows Kernel mode driver, version 258.97 don't work longer and was recovered successfully. This is the driver downloaded on the Toshiba site and it is quite disturbing since it is one loan and other machine my a660 had another serious problem with the same graphics chip (GT330M) is what can I do?

  Thank you very much

  Passman S

  I noticed the same problem on my Satellite P500 with the same NVIDIA graphics card. But after that the driver puts everything works well again.

  To be honest I don't know why this happen and always happens when I m using internet explorer or the browser chrome. When this happens to you?

  If you can continue your work after recovering from the pilot, according to me, there is no reason to panic

• Satellite L300D - search display driver for Windows XP

  Hello! I installed Windows XP on my Toshiba Satellite L300D-12 t PSLC0E. Now, I have no driver for the graphics card ATI Radeon X 1250. Toshiba doesn´t press on his website Internet Windows XP for this model - no driver found on their website. OK, so I switched to ATI - tried to install catalyst / pilot, didn t work, I got a message "no succesfull installed.

  Does anyone have a solution / idea?

  Another problem: the system says, need a driver for SM Bus controller. What should I do here?

  Thank you!
  Caproe

  Hey Buddy,

  > Support Toshiba doesn´t on his website Internet Windows XP for this model
  I agree with you, but maybe you will find a display of another model L300D driver.

  If you are looking for Toshiba Satellite L300D site (without model number) and Windows XP, you will see a display ATI for XP, version 8.479.1.4 driver

  Check this box!

• White screen after the Satellite Pro P200 display driver update

  I installed the latest display driver ATI Mobility Radeon HD2600 (8.432, on the site of Toshiba through Tempo) on my Satellite Pro P200 yesterday. Reboot, everything seems good as much as the screen "Please wait...". "Windows Vista professional, but instead of showing the page of connection I get an empty screen (with a mouse cursor that moves around as usual). All I can do at this point is to be able to, and I'm running out of ideas on how to move forward.

  Things I've tried:
  # start in safe mode, the video resolution or last known good configuration, result the same screen empty.
  # connect to the system using remote desktop (to disable the driver) is not possible because the system has not yet loaded the network drivers.
  # I can't go back to a restore point because Vista can't find (I did a manual after you install updates windows over a couple of days).
  I can run a system command line options of recovery and prefer to use it to disable the driver + if + I knew how before the use of the more radical options.

  A search on the web (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
  previous versions of the driver, but none of the links I've looked at to give a solution which does not exist for me.

  I agree with Hairyfool, you who should solve problems using an external display. If no image appears, then something with the material might be.

  Please give some information about your situation...

  See you soon

• Satellite A200 - install display driver

  Hello

  I have a Satellite A200 (PSAF6A 02Q01N) which has recently crashed after a Windows Vista downlaod. I managed to make a recovery disc and run it again, but now the resolution of the monitor is only available in 1024 x 768 or 800 x 600. That is why the screen is all tense and the resolution is terrible. I tell myself that I need to download and install a new driver and I think I found it. The firs ATI Display Driver listed on this page

  http://www.MyToshiba.com.au/support/notebooks/satellite/A200/psaf6a-02q01n/download?OS=15

  I downloaded it and guess I must run the installation of the BIN directory Manager. Can anyone confirm that it is correct?

  Thanks in advance,

  VIC

  Stand by. If I understand you right, you have this resolution problem after installation of operating system using original disk recovery facilities.
  I understood you right?

• Satellite A60: ATI graphics driver issue - Blue error screen

  Hello

  I have a satellite A60 and I've had it for a year, and now all of a sudden, I have frequent crashes. The blue screen of death was told it is caused by a driver not working not properly, namely an ATI driver.

  Hello

  The blue screen of death is usually due to a software problem or malfunction of the equipment. In your case, I recommend reinstall the graphics driver.
  See the page of the Toshiba driver for updates.
  If it doesn t help and the blue screen appears again and it would be very interesting to know the details of the blue screen, for example stop: xxxxxx

  Check it out.