Problem of saving data on the form
HelloIn my ranks on dataform that I try to save the data for a member and it dosent record. There are three levels for the Member
A-> level 2
B > level 1
C > Level0
I chose A on the form IDescendants, and if I save data on members C it common record. However when I select only C in the selection of members on dataform data is saved.
The only thing that comes to mind is that Member C is implicit sharing member (as a member of level 0) and A, B and C all three stored property outline.
Should I choose member B like never share and select Idescendants would be saved data?
Please help its urgent!
Thank you in advance
Then, it is almost certainly a problem of implicit sharing.
Tags: Business Intelligence
Similar Questions
-
While closing a link to expedia.ca a message come to say: the page you requested was created using data from the form. This page is no longer available. If you resend the data, any action that has been specified by the form will be repeated. You want to resubmit the data? When I click Yes or no, nothing happens except that the message just reappears. I can't get rid of it so I can't do anything else on my phone, except to answer a call if someone calls me. How can I get rid of this message from my phone? I tried to turn it works... even by leaving off the coast for 5 minutes before turning turn it back on. I can't even check my OS because I do not what anyone on my phone. I hope someone can help me with this.
Have you tried a battery pull? This should fix a problem as you described.
With your phone, remove the battery, then replace a minute later. This will do all sorts of wonderful things to your phone for free unclaimed memory, delete no cited source points and make your phone run smoothly.
Try it and let us know if it does the trick.
-
ORA-01843: not a valid month - no dates on the form
When I submit a form I get the error "ORA-01843: not one month valid." I've now removed all the date of the form fields, and there is no triggers or constraints on the table concerning the date fields, so I'm at a loss on how to solve this problem. Any help much appreciated.
Edited by: Waggers April 11, 2012 03:38in lspq? a default value? in a select with to_date?
-
print the data of the form instead of the whole page
Hi all
I'm having a problem in my ADF/JSF page. I just want to print the data in the form of my form instead of the whole page.using javascript:print() method prints the whole page. so can you help me solve this problem. I JDev 10.1.3 and do not want to upgrade to 11g JDev!
Is there a java code to do?
Thank youHello
You can apply CSS to the page and use the media to deermine switch which components will appear in print and who should not.
Download the word document in http://thepeninsulasedge.com/frank_nimphius/wp-content/uploads/2008/05/OldAndLostBlogBusterTips.zip
and take a look at page 287
Frank
-
Export data from the forms to Excel
Hello
I am facing a problem with exporting data from a form to excel.
When I go to the menu - and file-> export. The export starts then progress, then disappears.
If I do just steps above and hold down the CTRL key... the excel opens.
I remember there was a setting to recognize that this export goes to Excel. But have forgotten what I did to solve the problem.
My pop Blocker is turned off.
If anyone can help out me... that would be greatly appreciated.
Thank youHello
In the browser, please add the URL of the application to the trusted sites list and sign the application again.
Also, be sure that no errors are reported in the log database (no space).
Export option in menu Apps does not work under Windows-XP OS
Export option in menu Apps does not work under Windows-XP OSExport form data to Excel the FILE using file > EXPORT
Export form data to Excel the FILE using file > EXPORTKind regards
Hussein -
Can what method/class/object I use to send data to the form variable to BradySoft? I have a basic configuration of BradySoft label and I want to send it data of variable shape (a serial number) from Labview ActiveX. I joined guide Brady ActiveX programmers, but can't understand what to use for that.
P.S. I would call Brady or TekLynx tech support on this issue, but they have a strict policy while BradySoft supports ActiveX, but does not provide technical support assistance programming with it. I thought I would try the Forums OR.
Just an update. I could get this to work myself after a few days of playing with it (I suppose that the best way to learn!). I have attached a sample VI for anyone interested. Can we Kudo ourselves?
-
Selection of the date on the forms online
Hello. I have a Xperia z5 compact Marshmallow. When you enter a date on the forms online (Chrome), a calendar just for me to choose a date of. I have to scroll through each month for the previous dates. This means enter my birth date takes an eternity that I have to scroll every month to the year 1990. Is there a faster way to do this? Thank you.
I finally (accidentally) figured this out. If I click on the year he allows me to scroll directly to the year I want
-
Hi Experts,
JDeveloper 12.1.3.0.0
I have a VO based on entity object. With a column of the VO is transient attribute (I created).
I need to call a stored procedure for each row in the transitional attribute and display the data in the form of af: table. As well as other attributes.
So can anyone suggest how can I achieve this?
Thank you
AR
I think that you need a stored function (which returns the value) in this case, is not?
Take a look at:
https://docs.Oracle.com/CD/B31017_01/Web.1013/b25947/bcadvgen005.htm
and search for:
Invoking stored function with only Arguments in
call your function in the Get attribute and return value accessor...
-
On the forms send us and receive in return, data in the form of fields will be not print. We can view the data, but the fields to print Virgin. How can I fix it?
OK, it's different. These text boxes are (at least engineering point of view) not considered form data, they are annotations (or markup). On your print dialogue box, you will see a group of "Comments & Form". Make sure that the first control is set to "Document and annotations:
After this change, you should see the markup of your impressions.
-
How to NOT send some form data when the form is submitted
Hello
I created a PDF form with radio buttons in the Group and the boxes. When I the form of data, such as values using the submit by e-mail button to send form data as XML or merge data into a spreadsheet files, I'll see the data values for radio buttons and checkboxes.
What I want here is to don't get the data values for some controls such as the boxes option, but no other controls like check boxes, in the XML or Excel worksheet after submission of the form. I know how to hide the controls in the form, but I have to the visible and active boxes on the form.
Is there a way to hide or do not send form data when the form data is submitted?
Thank you
Sam
Hi Kyle,.
That's exactly what I want! Once I have not selected any data binding, the field is in shape and active, but when submitted as XML or it merge with a spreadsheet, the field is gone.
Forgive me if I didn't my self clear in my question. Answer you is straight to the point.
Thank you very much!
Sam
-
Send a reminder using the Dates of the form
Hi all.
I don't know what is the best way to send reminders (email), verification of the dates of the form.
For example:
There is a task assignment when the user enters 5 dates (day 1, day 2, day 2... etc)
Then I need to send emails to 'Xpath user' when the date system is: "day 1" - 24 hours (for example). "." The same date 2, day 3... etc.
How can I do?
I write the dates in the database need?
Some ideas?
Thank you very much.
Maria
You can use a gateway with a branch for each email that will be sent. Put a holding Point before sending email. Set days to wait as an XPath expression using get-days-from-dateTime-difference(current-date (), Date of the form). Subtract 1 for your less 24 hours.
-
show/hide the element to date in the form problem
Hello!
I have a form and a few items of date on the same line. The problem is when I use dynamic action to hide one of the items based on another element, this Summit hides all the elements in date on the same line. I think it's the bug. I use Apex 4.0.
Now, I created a dynamic action that fires when the element changes P2_ITEM. The action is: run the JavaScript code and the code is:
$('#P2_DATE_ITEM').hide)
But it hides only an entry of date field. Date picker image and label rises.
Does anyone know how to hide these two also?Hello
Try
$('label[for="P2_DATE_ITEM"]').hide(); $('#P2_DATE_ITEM').hide().next("img").hide();
Kind regards
Jari
-----
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
Tax installed Turbo (Canada Version) Impossible to enter data in the form of sheets T
I called Turbotax 3 times & downloaded back to etc, changed the display settings, etc.
Unable to enter data into forms Tslip
TurboTax says its a problem in which Microsoft should solve
Hi SRE1937,
1. what exactly happens when you enter the data?
2. you receive messages or error codes?
You can try to uninstall and reinstall the software TurboTax and check.
Check out the link to uninstall a program:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
You can also check in the observer of events for errors and information relating to what is causing the problems.
Check out the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
Regarding formats, you should contact TurboTax and Microsoft cannot help in this case.
Check the link for TurboxTax support:
https://TtlC.Intuit.com/app/full_page
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer. -
Display the data in the form of column headers
I am trying to achieve in Apex 4.2
My table is like (example)
Identification number
date of date_a
value_1 number
Value_2 number
Value_2 number
I have my sql like
SELECT id, date_a, value_1, value_2, value_3
from my_table
If the report displays in the form
ID date_a value_1 value_2 value_3
1 01/01/2012 10 20 30
15/03/2012 2 12 14 24
Can anyone show me an example of how to create such a report
01/01/2012-15/03/2012
1 2
10 12
20 14
30 24
I took a look at pivot, but doesn't seem to be the thing
See you soon
Gus
Gus,
First of all you must understand SQL itself cannot change the names of the columns for a query, as Frank has said.
Columns in a SQL query are the 'projection' and the number of columns, the names of them and the data types must be determined before all data are extracted.
See the following article: 101 PL/SQL: cursors and Projection of SQL
Apex is simply based on the queries that you write, and even there not magically be able to change the names of columns in report based on your data.
This is not to say what you want is impossible... it's possible... but not easily...
See: how a function having a dynamic number of columns in the pipeline?
Essentially the data itself have be questioned or known, before the data is retrieved, so that requires only the generated columns dynamically based on known data (for example, the criteria entered by a user) or you can do a query of two passes... questioning the data only once to get the values and then dynamically generating a second query to extract data with dynamically generated column headers.
In the Apex of reports you will usually have the problem report attributes are defined as part of the update and are determined when the query is assigned to the report (that you can manually override the headers)... but the apex will not allow lines dynamically the changes based on the data, for standard reports, it allows. I have not tried to do in the Apex, but you can maybe try and generate the report results using a two-pass method, to put in an HTML region, but it depends on what user interaction is required with the report, that you far built-in report functions.
-
Data in the form online endangered
Hi all
I entered data into the online form and saved. I got the message as data is saved successfully, but I didn't see all the data in the online form.
I created a fake online form and entered the data for the same combination and I am able to see the data
I thought that the original online form is corrupt, so I did a reconstruction of the same online form... I have no luck yet data are endangered. There is no calc script, attached to the weborm
Please let me know if someone did this kind of weird question
If you have created a form of separate data and it worked then, it can't be implied sharing question, check out the link below, see if you are faced with the same question:
Hyperion Planning and much more...: cannot save the data of a member in a data form
See you soon... !!
Rahul S.
Maybe you are looking for
-
Gray glittering color screen on Qosmio G20-120
HelloI have a problem very confusing with my new Qosmio G20 - 120.I can see vague and wink on my screen when the brightness is set to 2 or 3 levels under the maximum, and the background of the display is set to dark grey (or other color non-black)Thi
-
ePrint for HP Officejet Pro 8500 a works, but ePrint closed my sign-in account
I used ePrint with my HP Officejet Pro 8500 has for 2 years and it works very well. After the last update of software, I tried to connect to my ePrint account to add another user authorized, but the system has forgotten my E-mail address. I know th
-
HP Photosmart 5520 does not connect with computers
I have connected my hp 5520 for the wireless, but my computer can't find it when I try to connect to it.
-
HP Pavilion 17 t J5R51AV: driver for Qualcomm model Atheros QCWB335 Windows 7 (64)
Hello. I'm looking for a Driver for 7 (64) of Qualcomm Atheros model QCWB335 for Windows. (802.11 b/g/n WLAN and Bluetooth (r) [1 x]) I tried HP support system discovery and recommended pilot report, he reads material and product incorrect. I tried t
-
Application of Catalyst control centre: Host has stopped working
I get a pop-up window saying: "Catalyst control centre: host application has stopped working.". " It is written in the body of the box: "a problem caused blocking program woring correctly. Windiows will close the program and notify you if there is a