Problem of sharpness of image after export to JPEG

Similar Questions

• Quality image after export problem

  Hello

  I have a problem of quality after the export of the image. for example in one case, I make a modification, especially at the level of sharpness of an image, after when I exported the JPEG image, there is a large drop in sharpness and more noise.

  Knowing that the adjustment of export level everything is good in quality years 100% and type pour inking of high office.

  NT: the quality of the Exported JPEG image is the same as the quality of the image in the library and not in development tab.

  Thank you

  There are several problems with your settings. The detail panel sharpening (NET ') and the noise reduction controls should only be paid in Zoom 1:1 Mode. The amount of sharpness (Gain), detail, brightness and contrast are too high. Adjustment brush sharpening (NET ') setting 100 is compensated by the noise of 100 (noise), so little local sharpening is applied. Also the moire ' and fringe 100 parameters must both be left at 0 (OFF), because they serve no purpose for the sharpening of the premises. Please try the settings below and evaluate the results in development and library modules View Zoom 1:1. If having the same problem please download the raw export to DNG on Dropbox or other image file sharing site files and I'll try to decide the issue.

  For more help and tutorials in French please look on this link: training for Lightroom, assistance and support. Adobe Photoshop Lightroom 5

  

  

• Problem: video downgrades the quality after exporting

  Hello world!

  IM new and this is my first question on the forum.

  Now, I created 10 succesful videos with Adobe Premiere Pro, editing Gopro videos 1080 p 60 fps.

  My new video, I started using my phone Samsung Galaxy Neo S3 content.

  The problem: after exporting my video, the quality of Gopro videos is like 480 p, but I still want the quality as the original, 1080 p 60 fps.

  What I need to do / how can I solve this problem?

  Relevant information:

  Laptop specs: Windows 10 960 M from NVIDIA, Intel core i7.

  Export format: H.264.

  I tried already rendering in modes: Youtube, Vimeo 1080, Match source 1080HD high flow, I ticked the box "maximum render quality".

  But nothing is done, the quality of the videos Gopro changed as 480 p after the export of the video.

  Please help me.

  Although I have not any more wise, I found a solution on Youtube.

  In my calendar, there is a yellow bar. I had to click "sequence" and then "render outside". Then the bar turned green.

  Then I had to select the export mode: HD 1080 p 29.97 fps.

  Then, as in my first picture, you can see "basic video settings".

  You can scroll down here, and there is also a "fps rate" which was 30 (automatic).

  I had to change at 60 frames per second. It is also recommended to check the box "made to maximum depth" in the audio and video tab.

  The size of the file push double (200%), but the quality is good as it should.

  I want to thank you for your efforts and help.

• Problems of stuttering and sync after export to the H.264 format

  I edited some AVCHD videos in Premiere Pro 5.5.0, made of a sequence of 5 minutes and exported to H.264 to Vimeo format, using the guidelines of Vimeo:

  NSTC

  1280 X 720

  29.97 FPS (like the shot)

  Progressive

  Square pixels

  CBR 5 Mbps (tried pass VBR 1 and 2 pass, without any difference)

  AAC audio

  44.1 khz (from original 48 kHz)

  320 b/s

  Bitrate priority (tried these frequencies, first of all, no help)

  Export plays well in VLC player 2.0.1 into Quicktime and after download from Vimeo, audio plays, but the video stutters and is often out of sync.

  If it makes a difference, MacBook Pro, 9 GB RAM, Mac OS X 10.7.3

  Any ideas?

  I actually thought it might be your system.  That's why I asked for the Vimeo link.  It only would be not the first time he stammered for the poster, but not for people who have test.

  Restarting seems to confirm this.

• Change of color after export from Lightroom

  I noticed a color drastically change after the export a file from Lightroom to a JPEG file today. I have been using Lightroom for a while, and it's never happened before. I'm assuming that I changed the setting somehow and I cannot find how to fix.

  Here is the original.

  

  After exporting a JPEG file. The color is so radically different. I tried both sRGB and AdobeRGB, and they are having the same problem.

  

  It is not as clear as JPEG files, but files edited with Photoshop CS5 seems slightly different view on Lightroom.

  I'd appreciate it if someone could help me. Thank you very much for your help!

  In the preferences panel, open al Presets tab uncheck the checkboxes at the top (Apply auto tone, etc.). Then click on the button 'Reset all parameters of development by default'. This should make the reset button behave normally. It will remove any other default settings you defined well.

• Image quality terrible after export RAW to JPG in Lightroom CC

  Hello

  I have a huge problem, all my images are blurred after export to jpg, won't save the sharpening applied.

  Is this a bug still / again? Help, please!

  You view the image at 100% magnification? When the image does not match the screen, different applications use different algorithms to resize the image, and some seem sharper than others.

  If the image is intended for display of the screen, you must export to the pixel dimensions will be adapted on the screens of most people - like 1000 pixels.

  When you use 2400, you are sure that the image will be resized on most screens.

  Edit: 100% magnification is only can be used to assess the sharpness accurately.

• Last night my 5 Lightroom suddenly seems to update. A shooting blue veined lgo ratings appeared on my screen and many of my settings have been changed. My problem now is that when I export an image on my drive C:, the exported image n

  Last night my 5 Lightroom suddenly seems to update. A shooting blue veined lgo ratings appeared on my screen and many of my settings have been changed. My problem now is that when I export an image on my C: drive, the exported image is no longer automatically appears in my Picasa files as it has for years. How can I fix this please?

  Hello

  Greetings!

  In the export dialog box change the export after option.

  

  Concerning

  Jitendra

• AIR - no images after the release of export built

  Hello

  When I run my AIR project in Flex Bulider I have images in my application. After export version built in this place is no pictures in my application. How can I fix?

  Yes, I had the same problem.  Here is a hack:

  If this isn't the case, then you can kind of cheat. When you publish your .air file, it
  offers you the choice of files to include in the archive.
  If you click on 'back' at this point then you can (on the outside
  of flexbuilder) to copy all the files you need in the folder "bin-release".
  who gets temporarily created as part of the publish operation. Previous
  in flexbuilder, click 'next' again and you will be back in the scene where
  You can specify files to include, but now you have the possibility of
  Select the files that you just copied to bin-release.

  This, however, never gets old pretty quickly!

  REF - time http://old.nabble.com/How-do-I-include-a-file-in-the-AIR-app-storage-directory-at-install---td21007763.html

  Even though, I recommend you to consolidate all assets with Apache Ant, but which requires some time to set up a file to do if you're not familiar with ant.

  And here is another link, I have bookmarked it:

  http://forums.Adobe.com/message/2294086

• Size reduction after export of the LR5 in image format JPEG /Formaat reductie

  After exporting my pictutes of LR 5 in format JPEG (pictures) size reduced sharply to the acceptable format of the United Nations. IE: photo 4256 x 2832, after export size is reduced to 1000 x 665 or 522 kB. This picture is not good enough to make photo albums.

  For a few months, I have had no problem at all with the sizes. 3500 x 1943 JPEG and size 2.05 MB all natural weres. What can be the reason for this negative problem?

  Nog even in het Nederlands: naar Mijn tuning of Na het i.e. van bewerkte foto ITU LR5 in JPEG is sinds kort het formaat teruggebracht naar een niet acceptabel level. Example: 4256 x 2832 wordt naar solution 1000 x 665 522 kb. Grote met fotoboek foto voor een says geen werkbaar formaat, especially omdat het eigenlijk op andere dag optrad ene van verkleiningsprobleem. Voor die tijd has een formaat van 3500 x JPEG 2.05 MB gebruikelijk 1943. IK kan niet wat ik verkeerd doe ik verkeerd gaat wat en gud. MOET er soms een page worden veranderd?

  In the export dialog box, make sure that:

  The quality is 80 or more

  Do not file size limit

  Not resize to the Fit

  I will appear one or all these are a limitation in your export to JPEG.

  

• Keys w custom image does not show up after export

  Hello

  I have a lot of buttons created with a custom image and all the fine features to the COP6, but after export to the .exe module buttons image in bulk and appear as white squares. It still works only lost image. Any ideas as to why?

  Thank you!

  Hello

  Welcome to the Adobe Forums.

  I tested this same workflow at my end and it worked for me, I used the "Image button" button instead of the "Transparent" and imported the image, screenshots:

  

  It could be useful!

  Thank you

  Vikram

• Problems with CSS/Images accented export in CS4

  Platform Windows, CS4, 10.03 Fireworks

  I installed CSS/Images improved export stuff, but I can't seem to make it work for the following scenario.

  I have a rectangle rounded with a drop shadow and a header at the top content area Central and bottom footer. This is my layout of the desired target. Very very basic.

  1. I have to draw the rounded rectangle using the antiderivative of r - r and give it a drop shadow.
  2. Cut the top of the page header - assigned as a bkgd image.
  3. Cut a small Center for my dynamic content section and assign it as bkgd is repeat.
  4. Cut the foot of page down, assign as a bkgd image.

  

  1. CSS export.

  

  The resulting HTML code is not what I expect. No matter what I do, in the Middle, repeating the area seems they are assigned as the background for the external div that is generated for the rounded rectangle as you can see here in the capture of the HTML resulting in IE 8.

  

  I follow the blogs on these techniques and this technique "tranche 3" is supposed to be supported and FW is supposed to understand what I'm trying to do, but I can't seem to make it work. Can you shed some light on it, or provide the steps to accomplish this quite simple example? I have attached the files PNG, HTML, and CSS resuting.

  The article I am referencing in particular is located here: http://www.adobe.com/devnet/fireworks/articles/standards_compliant_design_03.html and is titled, create web designs with Fireworks CS4 standards.

  Thank you

  Bob

  Try to use rounded rectangle and no rectangle tool and also to avoid the background transparent.

• Audio goes out of sync after export (PP CS3)

  Hey there!

  So I had a few problems with first Pro CS3. My main problem is with the audio goes gradually out of sync after export. I am trying to export in 1440 p (2560 x 1440). I export in h.264 with 60 images/s.

  1. Original file type: AVI
  2. Original Frame height and width: 1680 968
  3. Original Audio bitrate: 1411 kbps
  4. Original Audio sampling rate: 44 kHz
  5. Original frame rate: 60 fps
     Data rate: 1191254 kbps
  6. Total bitrate: 1192665 kbps

  Before installation:

  

  Can someone help me and tell me what are the audio settings I should export in correlate with 1440 p and 60 frames per second? Any help is much appreciated, and I look forward to your responses.

  Much appreciation,

  -David

  What codec is used in this avi (as it isn't a regular avi of a camera) and if the framerate is variable, you need to convert to constant framerate before importing it in first.

  Converter for example Handbrake.

  Bit rate may be too high. Don't forget that CS3 is pretty old.

• Photos of pixilation after export

  Hi, I just noticed that after exporting to an image, the sky seemed very pixelated.

  Although it seems completely smooth in the develop module, even when you zoom in, I seems that the exported photo has low resolution.

  Here are a few testimonials:

  

  

  I hope that you can see what I mean.

  Thank you.

  A quality setting of 60 is aggressive enough, in my opinion. I suggest that you export again with overall quality at 80-85 and see if that solves the problem.

• Fuzzy video after export

  Hello Adobe community,

  I've used the search function on this forum and I know there are already threads in my problem, but none of them solved my problem.

  According to some tutorials on Youtube I tried to export a video in Adobe Premiere, but no matter what options I select, it is still blurry after export. I'll add some screenshots to clarify the problem & my export settings. In the window preview of Adobe Premiere, the edges are sharp and the color seems to be like the original.

  The source file is recorded with Fraps in .avi format.

  Order: Previous Export | After export. Export settings

  

  Hope someone can help me.

  Hello

  You must create the same settings to just make sure that the edit mode is custom.

  Thank you

  Arjun

• Matte & low - audio sounding after export

  Hello

  I am editing in Premiere Pro CS4. If you see the images below, it will tell you a little more about the system and the parameters I use. I gave my client a DVD and she complained the audio. I asked him to send me a description of what she was not happy, and she wrote this: "with audio, the sound quality was lost, it was not loud and clear. And the base and the beats were very low. Came out very thud '. Now, I agree with her. One of my fellow editors that uses another system produced a video and immediately I noticed the sound was wonderful. I could feel the base and hear several instruments.

  My original audio peaked like this:

  

  I asked someone what was the best level to set in and he said that he peak at-6. So now my audio picks like this:

  

  After the filing of the complaint, I asked a few more people, and they said that the green audio level should be level 6. So now my audio picks like this:

  

  Now I don't know if the settings above have solved the problem, but at least on the computer, it sounds better.

  It's the Premiere version I use:

  

  This is some info about my computer:

  

  Properties of the file prior to export:

  

  Properties of the file after export:

  

  Project settings:

  

  

  

  Here is my export settings:

  

  

  

  I hope that is enough info and I appreciate all help. Let me know if you need me to gather more information.

  --------------------------

  Now, I agree with her. One of my fellow editors that uses another system produced a video and immediately I noticed the sound was wonderful. I could feel the base and hear several instruments.

  --------------------

  My question is, "How can I get my audio to sound more gutsy (base more, harder,)"

  ------------------------

  you accidentally fall in love with talent?  Is not of the never before seen in the film industry... where criticism becomes something "personal" between the Director / shooter (you) and talent...?

  Perhaps you could get closer?