Size reduction after export of the LR5 in image format JPEG /Formaat reductie

Similar Questions

• After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  Make sure the jpg has embedded sRGB profile.

  In what application you view jpg files?

  The symptoms you describe are typical of images with Adobe RGB or ProPhoto read in an application that does not support color management.

• Export of the LR5 to specific dimensions

  Export in LR5 for a photo contest.  Indicated Requiremnts are "high resolution JPEG at 300 dpi, not larger than 8 x 12 inches.  Just do not know what settings to use in the LR5/cc to meet these specifications.  There is no "dpi".

  I reason to assume that if I have put 300 ppi, which who will set the resolution and also to 'fix' the size of the magnification of the picture so he used get expanded beyond what would look good / be printable?  I imagine that images are 'judged' in JPEG format on a monitor and selections will then will be printed in a book Blurb in final print sizes.

  Of course, I don't want no degradation of image quality and don't want images automatically enlarged to 8 x 12 inches.  Some of my pictures are square and do not change to 8 x 12.  A peak is also a small area of the original image and don't know if she's going to explode well at 8 x 12, so don't want that it is automatically expanded to 8 x 12 inches.  Shooting a D300 in raw if that matters.

  This new and pretty clueless so apologize if I ask an obvious question.  Any help appreciated, but looking for recommendations made by the exact LR5 export settings I have to enter.  Thank you.

  Post edited by: Brett N

  I guess you need to send to the digital photo contest and not a print.

  In this case, I would say the problem is that the rules of the competition really don't make sense if they talk about DPI. DPI applies only to copies, not digital photos.

  So, we could also assume that they will really you should produce a JPG file which is not bigger than 8 x 12 at 300PPI, in which case you would be:

  (a) if the cropped picture is greater than 2400 x 3600, export the photo by clicking "Resize to fit" and then selecting the height and width as the ppi, 2400 x 3600 pixels and 300.

  (b) if the cropped photo is less than 2400 x 3600, export the photo to uncheck "resize to fit.

  I wonder about how someone has launched a photo contest would not know the difference between the PPP and the PPI. You can check with the administrator of the contest they were really talking ppi, just so that we can confirm that the assumptions that I use here are correct.

• Office loses datebook categories after export & import the file dba.

  Hello

  After reading a lot of posts, I can't find any that have reported a similar problem, so here it is.  Office loses datebook categories after export & import of a file of dba.  I use Palm Desktop by Access v6.2.2 and a Verizon Centro.  This problem has nothing to do with the synchronization.  I just exported my calendar of events in a DBA file, import the same file and all event categories have been set to "unclassified".  Is this a known bug, or perhaps, the s/n file includes no category information?

  I'm really curious to know if the dba file (archive date?) contains information catergory.

  Thanks in advance,

  CentroIllinois.

  Hello!

  A bit of a limitation of Palm Desktop.  Before you import the file s/n, manually add the category nanes via change categories and then try again to import the file dba.  Due the category names must be exactly the same spelling and spacing as before when they were exported.

• Problems of stuttering and sync after export to the H.264 format

  I edited some AVCHD videos in Premiere Pro 5.5.0, made of a sequence of 5 minutes and exported to H.264 to Vimeo format, using the guidelines of Vimeo:

  NSTC

  1280 X 720

  29.97 FPS (like the shot)

  Progressive

  Square pixels

  CBR 5 Mbps (tried pass VBR 1 and 2 pass, without any difference)

  AAC audio

  44.1 khz (from original 48 kHz)

  320 b/s

  Bitrate priority (tried these frequencies, first of all, no help)

  Export plays well in VLC player 2.0.1 into Quicktime and after download from Vimeo, audio plays, but the video stutters and is often out of sync.

  If it makes a difference, MacBook Pro, 9 GB RAM, Mac OS X 10.7.3

  Any ideas?

  I actually thought it might be your system.  That's why I asked for the Vimeo link.  It only would be not the first time he stammered for the poster, but not for people who have test.

  Restarting seems to confirm this.

• after export to the web color problems

  Hiya

  I'm faced with a problem of color on a website, I recently designed.

  The original drawing was done in Photoshop CS3 and includes a purple Strip think at the top of the page (http://www.deliciouscafe.co.uk/index.html). After slicing up design and then "save for web and devices", changes to purple-, it appears less dense and really should be a much deeper shade.

  Not sure if I use the wrong export method. I tried the format jpeg, png and gif, but nothing seems to make a difference, but I have not tried to change the other settings in the save for web and devices dialog box so I was wondering if something could help?

  Any help would be appreciated!

  Convert (don't assign it) the color of your images to sRGB profile.

  When registering for the web, don't forget to include the for sRGB ICC color profile.

  Do not mix the GIF and JPG when you try to maintain the uniform color. Use the same format.  (background.gif has a purple which may not correspond to quote.jpg)

  Web color is a mess, especially on Mac. The steps above are the best you can do.

• printed page is not "actual size" even after clicking on the actual size

  I try to print forms from the IRS, but they are smaller than actual size printing.  Same problem with state tax forms.  I also clicked on the option "size" real and always get the same result.

  Sorry I couldn't respond sooner.  Thanks for the suggestion, but unfortunately it did not work. Finally, I went to printer manufacturer online support chat and the tech understood that it was a problem of the browser (Firefox) and opted for Google Chrome and now everything works fine.  Thanks for your effort to help.

• How to make a dvd with an audio track after export using the media encoder? I have 2 separate files?

  Hello

  I just burn a video that I have completed. It's a m2v file and so I have a point of view audio AC3 and a video track. I thought I was ready to go, but I can't understand how to burn audio and video on the same disk. It's very embarrassing because the settings I should use for export to keep video quality will give me 2 separate files.

  So, what programs you use or recommend I would like to add an audio track? I don't want people to have the ability to switch between tracks, I just want a normal life trace that you have when you watch a movie, I mean he's playing just by default.

  Thanks to the adv.

  Mark

  Again is Adobe for DVD software, although there are others.  In General, the export of the elementary streams for use in an authoring application is the preferred method, then you are doing things.

  Specific help again, I would do you for the help file again.  If you decide to use another application, its own set of instructions will guide you.

• Impossible to get the actual thumbnail image on jpeg files icon

  Original title: JPeg file icons

  I can not the icon of the actual thumbnail image on my JPEGs, only the jpeg itself icon. I tried to change the size of the icon to adults, as suggested by one of your readers, but which did not help. I also double checked to ensure I have "thumbnail" check in the view menu. I made sure the "always show icons" is unchecked in Control Panel.  Help?  All of the suggestions. I am running Windows XP.

  Hi Mjoan,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a non-Microsoft program is the cause
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
  c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

  Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

  Step 2: We also recommend you scan sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps:
  a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Clips of the video choppy after export to the formats .m4v.

  I created a photo slideshow with some video clips.  The clips will play in Quicktime, Photo Slideshow, etc.  But when the slideshow is exported in a .m4v format film, the clips are jerky.  Even the DVD created with the .m4v movie plays jerky clips.  Is this a problem with the picture or the format that I export?  Or maybe even my DVD Creator which is Wondershare?

  It probably comes to DVD conversion, but you do not say much on what parts of the film are jerky.

• After export, all the chapters link at the beginning of the video

  I have a sequence with about 10 chapter markers. When I export the video recognizes chapters in VLC, but they all have a link to the beginning of the video instead of the places where they are supposed to go. What is c?

  Chapter markers are designed to be even.

• Why open after export of the files from lightroom photoshop elements?

  Whenever I have export files in lightroom 6, photoshoped items opens.  How can I keep this from happening automatically... I don't want to change the files in the elements.

  Hi woodmaker,.

  Could you please let me know which option is selected in the export dialog to the title of "Post processing".

  Please change accordingly.

  Kind regards

  Tanuj

• Video no closure after export with the last update.

  My video is set to loop and the game while in the sequence, but when I export an mp4 media, is not in a loop. I did the same thing last week and it worked fine. Now it does not work. What Miss me?

  Hello Miss Nikita73,

  It is a characteristic of a multimedia player, no Premiere Pro. Check the settings of your player.

  Thank you

  Kevin

• Issue size PDF after click on the button "Save as".

  Hello everyone, I have a pdf file that is about 180 KB.

  After clicking on a button "save under", that I created, a small calculation script is run and the file, after registration, jumps to 1, 2Mb.

  Any thoughts on how to avoid this? Javascript calculations are simple calculations (capital plus interest and a penalty).

  Thank you everyone for the help!

  This is usually caused by policies that have been added to your form fields.

  You use a non-standard font?

• __Computer still crashes after restoring to the manufacturing of image... _

  Hello, could someone help me with these problems that I have been.  To be more precise... I have just restored my computer to the image of the original and always after the update of all my undates my computer crashed after that I logged.  These are the problems after isent problems and go...

  Signature of the problem

  Problem event name: BlueScreen

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)

  Mini092410 - 01.dmp

  SysData. XML

  Version.txt

  See a temporary copy of these files

  Caution:

  If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem

  BCCode: a

  BCP1: 0000000000000880

  BCP2: 000000000000000C

  BCP3: 0000000000000001

  BCP4: FFFFF80001A329A5

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Information about the server: 8be216f4-46dd-404e-be57-15ec5ada3372

  Signature of the problem

  Problem event name: MpTelemetry

  Signature of the problem 01: 8024402C

  Signature of the problem 02: EndSearch

  Signature of the problem 03: search

  Signature of the problem 04: 1.1.1600.0

  Signature of the problem 05: MpSigDwn.dll

  Signature of the 06 problem: 1.1.1600.0

  Signature of the problem 07: Windows Defender

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  Bucket ID: 31295353

  Problem event name: MpTelemetry

  Signature of the problem 01: 8024402C

  Signature of the problem 02: EndSearch

  Signature of the problem 03: search

  Signature of the problem 04: 1.1.1600.0

  Signature of the problem 05: MpSigDwn.dll

  Signature of the 06 problem: 1.1.1600.0

  Signature of the problem 07: Windows Defender

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

   

  Q: do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it (and that would have been installed, but not valid, when you reinstalled Vista)?

  A: McAfee has been the free trial when I bought the laptop.  I've tended after the expiration on the McAfee.

  Comment: If you didn't let the McAfee free trial expires before replace you it with the application of Trend Micro, chances are that you should not have to reinstall Vista.

  When you reinstalled Vista, McAfee free trial was also reinstalled, but not valid. You should have (1) uninstalled McAfee free trial AND (2) download / run the McAfee removal tool (see below) before installing Microsoft Security Essentials AND BEFORE that you have installed the Windows updates.

  That being said, see if the following solves your problem:

  1. download the McAfee Consumer Product Removal, save it to your desktop tool:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run this difficulty in DEFAULT and modes and AGGRESSIVE. [1]

  6. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft